ROCBOLT Threadbar System

ROCBOLT Ground Anchors

Advantages and Characteristics – Flexibility in transport lengths by using couplers
– High bond strength between ROCBOLT Ground Anchor and
– Easy system handling
cement grout
– Simple restressing and destressing through anchorage with nut
– Angle compensation using wedge washers
– Permanent corrosion protection possible
– Quality assurance through internal and external supervision
– Easy removal of temporary anchors through threaded sleeves
of production

Temporary ROCBOLT Ground Anchor Permanent ROCBOLT Ground Anchor

Corrosion Protection
Anchor Plate with Steel Tube
Anchor Plate with Steel Tube

Profile Ring

Steel Cap

Domed Nut Rocbolt plus Bar

Cement Grout
Domed Nut

Injection Adapter Corrugated Sheathing

Cement Grout
Spacer
Smooth Sheathing

Spacer

Smooth Sheathing

Rocbolt plus Bar

Grout Cap

ROCBOLT Technologies (Pty) Ltd. Phone +27 11 8786800 Published Date 09.2022
30 North Reef Road E-mail [email protected]
Germiston, 1429 www.rocbolt.com
South Africa
All dimensions, weights, quantities and specifications are those applicable at the time of this publication and may be amended from time to time.
Please contact your local DSI Underground service representative for final confirmation of any key specifications.
 ROCBOLT Threadbar System

ROCBOLT Soil Nails

Advantages and Characteristics
– High durability through double corrosion protection possible – Extension bars may be attached by using couplers
– Low susceptibility to corrosion – Spacers ensure proper grout cover
– Angle compensation up to 20 [°C] through formed plate – High standard of quality control from production stage to installation
– Flexibility in length by using couplers of the soil nails ensures consistent quality

ROCBOLT Soil Nail ROCBOLT Soil Nail – Double Corrosion Protection

Formed Plate
Structural Concrete or Shotcrete

Domed Nut

ROCBOLT Bar

Formed Plate

ROCBOLT Bar

Domed Nut

Cement Grout Cement Grout

Spacer
Corrugated Sheathing

Spacer

ROCBOLT Technologies (Pty) Ltd. Phone +27 11 8786800 Published Date 09.2022
30 North Reef Road E-mail [email protected]
Germiston, 1429 www.rocbolt.com
South Africa
All dimensions, weights, quantities and specifications are those applicable at the time of this publication and may be amended from time to time.
Please contact your local DSI Underground service representative for final confirmation of any key specifications.
 ROCBOLT Threadbar System

ROCBOLT Threadbar ROCBOLT Threadbar Pile ROCBOLT Threadbar Pile –

Piles Double Corrosion Protection
Additional Reinforcement
for Compression Pile
Advantages and Characteristics Anchor Nut with Plate and Lock Nut

End-Anchorage with Lock Nut

The ROCBOLT threadbar pile is a drilled
micropile with a central steel element based
Additional Reinforcement
on the ROCBOLT anchor with hot-rolled,
for Tension Pile
continuous thread deformations on both
Pile Neck Protection
sides.
The ROCBOLT anchor is encapsulated in
cement grout which acts both as corrosion
protection and as load transfer into the soil ROCBOLT Bar
or rock.
– Excellent load transfer into concrete
structures by means of anchoring elements ROCBOLT Bar

– Tensile, compressive and alternating

loads can be efficiently transferred to the
structure Spacer

– The coarse ROCBOLT thread guarantees

Spacer
maximum bond between steel and cement
grout
– The stress-strain curve of the ROCBOLT
bar shows high ductility
– Settlement can be prevented by using
preloaded ROCBOLT threadbar piles Cement Grout

– Load transfer into soil is optimised by Coupler

post-grouting
– Double corrosion protected piles can
be used for high corrosion impact as in
aggressive media such as seawater or
contaminated ground ROCBOLT Bar Corrugated Sheathing

– Can be cut off or coupled at any given

point
– A small drill hole diameter permits
economic drilling equipment
– Robust, coarse thread remains threadable
even when dirty or damaged

ROCBOLT Technologies (Pty) Ltd. Phone +27 11 8786800 Published Date 09.2022
30 North Reef Road E-mail [email protected]
Germiston, 1429 www.rocbolt.com
South Africa
All dimensions, weights, quantities and specifications are those applicable at the time of this publication and may be amended from time to time.
Please contact your local DSI Underground service representative for final confirmation of any key specifications.
 ROCBOLT Threadbar System

ROCBOLT Anchor System Applications

– Tie rods
– Marine ties
– Mining roof support
– Heavy lifting
– Reinforcing
– Tunnelling
– Formwork and scaffolding anchors
– High strength reinforcing

500B Threadbar
Technical Data
Nominal Diameter [mm] 16 20 25 28 32 40 50 64
Min. yield strength [MPa] 500 500 500 500 500 500 500 555
Min. tensile strength [MPa] 550 550 550 550 550 550 550 700
Min. yield load [kN] 101 157 245 308 402 628 982 1,758
Min. ultimate load [kN] 111 173 270 339 442 691 1,080 2,217
Cross sectional area [mm2] 201 314 491 616 804 1,257 1,963 3,167
Weight [kg/m] 1.58 2.47 3.85 4.83 6.31 9.86 15.41 24.86

670 Threadbar
Technical Data
Nominal Diameter [mm] 18 22 25 28 30 35 43 57.5 63.5 75
Min. yield strength [MPa] 670 670 670 670 670 670 670 670 670 670
Min. tensile strength [MPa] 800 800 800 800 800 800 800 800 800 800
Min. yield load [kN] 170 250 330 410 475 640 980 1,740 2,120 2,960
Min. ultimate load [kN] 200 300 390 490 565 770 1,170 2,080 2,540 3,535
Cross sectional area [mm2] 250 375 491 616 707 962 1,466 2,597 3,167 4,418
Weight [kg/m] 1.96 2.94 3.85 4.83 5.55 7.55 11.51 20.38 24.86 34.68

ROCBOLT Technologies (Pty) Ltd. Phone +27 11 8786800 Published Date 09.2022
30 North Reef Road E-mail [email protected]
Germiston, 1429 www.rocbolt.com
South Africa
All dimensions, weights, quantities and specifications are those applicable at the time of this publication and may be amended from time to time.
Please contact your local DSI Underground service representative for final confirmation of any key specifications.
 ROCBOLT Threadbar System

950 Threadbar
Technical Data
Nominal Diameter [mm] 18 26.5 32 36 40 47
Min. yield strength [MPa] 950 950 950 950 950 950
Min. tensile strength [MPa] 1,050 1,050 1,050 1,050 1,050 1,050
Min. yield load [kN] 230 525 760 960 1,190 1,650
Min. ultimate load [kN] 255 580 845 1,070 1,320 1,820
Cross sectional area [mm ] 2
241 551 804 1,020 1,257 1,735
Weight [kg/m] 1.96 4.48 6.53 8.27 10.21 14.10

Notes
– Minimum order quantities may apply to this product
– Extended lead times may apply to certain items. Please enquire
– Only ROCBOLT™ Technologies South Africa components should be used to enable the full performance of the bolt system to be obtained

ROCBOLT Technologies (Pty) Ltd. Phone +27 11 8786800 Published Date 09.2022
30 North Reef Road E-mail [email protected]
Germiston, 1429 www.rocbolt.com
South Africa
All dimensions, weights, quantities and specifications are those applicable at the time of this publication and may be amended from time to time.
Please contact your local DSI Underground service representative for final confirmation of any key specifications.