Scribd
Upload
39 views

RAM Connection Standalone CE Report

This document provides information on a steel connection between a UB 305x165x40 beam and a UB 457x191x67 girder. The connection uses a single plate FinP_EN_BG_10PL_2B1C_M20 G8_8 connector with the following properties: - A PL 10x80x220 steel plate centered on the beam with 3 rows and 1 column of M20 G8_8 bolts in a 70 mm pattern - 40 mm end distances and 40 mm between welds and bolts - The beam has coped top and bottom notches of 29.8 mm and 16 mm depths by 103.4 mm lengths

Uploaded by

jasekan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

RAM Connection Standalone CE Report

This document provides information on a steel connection between a UB 305x165x40 beam and a UB 457x191x67 girder. The connection uses a single plate FinP_EN_BG_10PL_2B1C_M20 G8_8 connector with the following properties: - A PL 10x80x220 steel plate centered on the beam with 3 rows and 1 column of M20 G8_8 bolts in a 70 mm pattern - 40 mm end distances and 40 mm between welds and bolts - The beam has coped top and bottom notches of 29.8 mm and 16 mm depths by 103.4 mm lengths

Uploaded by

jasekan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Current Date: 11/10/2020 11:44 PM

Units system: SI
File name: D:\Jase\2.0 AC Projects\C7086\Ram Connections\SB2 to SB3\SB2 to SB3.rcnx

Steel connections
Data
__________________________________________________________________________________________________________________________

__________________________________________________________________________________

Connection name : FinP_EN_BG_10PL_2B1C_M20 G8_8


Connection ID : 1V
__________________________________________________________________________________

Family: Beam - Girder (BG)


Type: Single plate

GENERAL INFORMATION
Connector

MEMBERS
Beam
General
Section : UB 305x165x40
Material : S355
Length : 3.05 m
Horizontal angle (deg) : 0
Vertical angle (deg) : 0
gh: Gap : 0 mm
Beam end inside support flanges : Yes
Beam to girder alignment : Top
Coped

dnt: Top notch depth : 29.8 mm


lnt: Top notch length : 103.4 mm
dnb: Bottom notch depth : 16 mm
lnb: Bottom notch length : 103.4 mm
Girder
General
Section : UB 457x191x67
Material : S355

Page1
FIN PLATE
Connector
Section : PL 10x80x220
b: Width : 80 mm
L: Length : 220 mm
tp: Thickness : 10 mm
Material : S 275
Position on beam : Center
Bolts : M20 G_8_8
n1: Bolt rows : 3
n2: Bolt columns : 1
p1: Longitudinal bolt spacing : 70 mm
e1: Vertical end distance : 40 mm
e2: Horizontal end distance : 40 mm
zp: Distance between weld and first line of bolts : 40 mm
Hole type on plate : STD
Hole type on beam : STD
Welding electrode to support : E_42
s: Support weld size : 10 mm

Page2

You might also like