Scribd
Upload
89 views1 page

Boehler 2507 P100 Rutile E2594 16 Covered Electrode

This document summarizes a welding consumable for duplex stainless steels called Avesta 2507/P100 rutile stick electrode. It is designed for welding superduplex steel grades used in applications like desalination plants, pulp and paper plants, and seawater systems. The electrode produces weld metal that matches the mechanical properties of the parent metal, including high strength and corrosion resistance. It can be used for welding in all positions at temperatures between -50°C and 220°C.

Uploaded by

kapsarc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views1 page

Boehler 2507 P100 Rutile E2594 16 Covered Electrode

This document summarizes a welding consumable for duplex stainless steels called Avesta 2507/P100 rutile stick electrode. It is designed for welding superduplex steel grades used in applications like desalination plants, pulp and paper plants, and seawater systems. The electrode produces weld metal that matches the mechanical properties of the parent metal, including high strength and corrosion resistance. It can be used for welding in all positions at temperatures between -50°C and 220°C.

Uploaded by

kapsarc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Welding consumables for duplex stainless steels

Avesta 2507/P100 rutile

SMAW
Stick electrode, high-alloyed, superduplex stainless
Classifications
EN ISO 3581-A AWS A5.4 / SFA-5.4
E 25 9 4 N L R 4 2 E2594-16
Characteristics and typical fields of application
Rutile coated electrode of E 25 9 4 N L R / E2594-17 type. Designed for welding of superduplex steel and equivalent steel grades such
as 1.4410 / UNS S32570, 1.4507 / UNS S32550 and 1.4501 / UNS S32760, used in desalination, pulp & paper, flue gas desulfurization
and seawater systems. Developed to fulfill severe requirements stated in NORSOK M-601 and similar standards. Properties of the weld
metal match those of the parent metal, offering high tensile strength and toughness as well as an excellent resistance to stress corrosion
cracking and localized corrosion in chloride containing environments. Meets the corrosion test requirements for ASTM G48 Methods A,
B and E (40ºC) in both as-welded condition and after post-weld heat treatment. Over-alloyed in nickel to promote austenite formation.
Designed for welding in all positions. The operating temperature range is –50ºC to 220ºC.

Base materials
1.4410 X2CrNiMoN25-7-4, 1.4467 X2CrMnNiMoN26-5-4, 1.4468 GX2 CrNiMoN25-6-3, 1.4501 X2CrNiMoCuWN25-7-4 1.4507
X2CrNiMoCuN25-6-3, 1.4515 GX2CrNiMoCuN26-6-3, 1.4517 GX2CrNiMoCuN25-6-3-3
UNS S32750, S32760, J93380, S32520, S32550, S39274, S32950

Typical analysis of all-weld metal


C Si Mn Cr Ni Mo N PREN FN
wt.-% 0.03 0.4 1.0 24.8 9.3 3.7 0.23 > 40 45
Mechanical properties of all-weld metal - typical values (min. values)
Condition Yield strength Rp0.2 Tensile strength Rm Elongation A (L0=5d0) Impact values ISO-V KV J Hardness
MPa MPa % 20°C –46°C HB
u 700 (≥ 550) 880 (≥ 760) 26 (≥ 18) 80 45 250
u untreated, as-welded

Operating data
Polarity DC+ Dimension mm Current A
Electrode 2.5 × 300 50 – 70
2507/P100 rutile 3.2 × 350 80 – 100
identification
4.0 × 350 100 – 140

Suggested heat input 0.3 – 1.5 kJ/mm and interpass temperature max. 100ºC.
Re-drying of the electrode possible at 250 – 300ºC for min. 2 h if necessary.
Metal recovery approximately 110% at max. welding current.
Post-weld heat treatment generally not needed. In special cases, solution annealing can be performed at 1100 – 1150ºC followed by
water quenching.

Approvals
-

415

You might also like