Scribd
Upload
58 views

81mm Mortar One Page

1. TBRL has developed a 4th generation electronic time and point detonating fuze for 81 mm mortar ammunition based on ESAD technology to enhance safety during storage, transportation, and usage. 2. The fuze uses an air-driven turbogenerator as a passive power source and environmental safety device, generating power on launch to power the electronics and initiate the explosive train after a minimum of 5 seconds of operation, ensuring safety at the barrel and launch platform. 3. The fuze can be programmed before launch via contactless induction to operate in either point detonating or electronic time modes, with a hardware delay also providing safe separation from the launch point for firing crew safety.

Uploaded by

Mohsin Abbas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views

81mm Mortar One Page

1. TBRL has developed a 4th generation electronic time and point detonating fuze for 81 mm mortar ammunition based on ESAD technology to enhance safety during storage, transportation, and usage. 2. The fuze uses an air-driven turbogenerator as a passive power source and environmental safety device, generating power on launch to power the electronics and initiate the explosive train after a minimum of 5 seconds of operation, ensuring safety at the barrel and launch platform. 3. The fuze can be programmed before launch via contactless induction to operate in either point detonating or electronic time modes, with a hardware delay also providing safe separation from the launch point for firing crew safety.

Uploaded by

Mohsin Abbas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Electronic Fuze for 81 mm Mortar bomb

A mortar is a weapon that fires explosive projectiles i.e. mortar bombs at low
velocities, short ranges, and high-arcing ballistic trajectories. The existing bomb
81mm Mortar HE uses point detonating (PD) fuze which are mechanical of nature
and are of second generation. These fuzes uses primary explosive based detonator
which are sensitive to heat, friction, shock and EMI/EMC. Moreover they uses
complex safety and aligning mechanism.
ESAD technology is being incorporated in fuzing systems for conventional
weapons to enhance the safety during storage, transportation and usage. Initiators
used are intrinsically safe as they use only comparatively insensitive secondary
explosives i.e. PETN, RDX etc. No use of primary explosives in the fuze avoids the
need of many complex moving/rotating devices in Safety & Arming mechanisms.
Hence TBRL had developed 4th generation Fuze for 81 mm mortar ammunition
based on the ESAD technology. The silent feature of the developed fuze are:

1. Electronic time (ET) and Point detonating (PD) Fuze.


2. Compatible with standard fuze well of 81mm Mortar.
3. Passive power source in the form of turbogenerator
4. Contactless inductive programmability of time
5. Inline EBW based explosive train
6. Barrel and post launch safety
7. Reliability above 95% at 90% confidence level.
8. Fail safe design

In the designed and developed fuze, Air driven turbo generator is used as
power source cum environmental safety device. This being a passive device, does
not have any inherent stored energy that can drive the electronics and fuze. On
launch, this turbo generator generates power that is used for powering fuze
electronics and initiation of explosive train. Turbo generator has to operate
continuously for minimum 5s for functioning of fuze thus ensuring barrel and launch
platform safety. On receiving power, the control electronicsidentifies the mode of
operations (i.e. PD or ET) and functioning time which was given to the fuze through
contactless inductive fuze setter before the launch of the bomb. A hardware delay is
also provided to ensure safe separation of ammunition for the launch point. This
ensures safety of the firing crew. Commands are issued by control electronics at the
pre-set time and given to the firing unit. If the mode of operation selected is PD, the
controlsection senses the impact using accelerometer and initiates the explosive
train. EBW detonator will be provided by TBRL at the prevailing cost at that time as
the same is not part of development and is a restricted technology. Robust and
reliable software is developed to carry out the predefined functionality.

You might also like