Module 33
Module 33
Ans. Millikan
Ans. Filtration
Ans. SiC
5. What important semi empirical equation which is used to predict the resistivity of an alloy?
6. What soft magnetic materials are used for high permeability applications and for low loss
electric devices?
Ans. Supermalloy
7. What will happen for a piece of wood and a metal in a cold day?
a. Oxygen
b. Nitrogen
c. Sulfur
d. Bromine
Ans. Oxygen
Ans. Phlogiston
Ans. Amorphous
11. It is a product of the weathering of complex silicates, particularly of fieldspars which are
abundant minerals.
Ans. Clay
12. Electrons occupy all the orbitals of a given subshell singly before pairing begins. These unpaired
electrons have parallel spins.
Ans. Acid
14. It is the enthalpy change associated with the condensation of gaseous positive and negative ion
into a crystal.
15. It is considered as derivatives of ammonia in which one or more of the hydrogens have been
replaced by the alkyl or aryl group. It is characterized by unpleasant odors.
Ans. Amines
16. It is a borosilicate glass with a very low coefficient of thermal expansion, hence it’s wide use for
cooking and serving utensils.
Ans. Pyrex
17. It is the calculation of both energy balances and material balances in a chemical system.
Ans. Stoichiometry
18. For the hydrogen atom, which series describes electron transitions (N=1) to the lowest energy
level?
20. It is defined as the amount of light output in lumens per watts of electricity consumed.
Ans. 4
23. States that the thermal efficiencies of all reversible heat engines operating between the same
two reservoirs are the same, and that no heat engine is more efficient than a reversible one operating
between the same two reservoirs.
Ans. Carnot Principle
24. In the Van der Waals equation, the number of constants is?
Ans. 2
25. How many constants are there in the Strobridge equation of state?
Ans. 16
26. It is the energy processes by the system as a result of its elevation with respect to the
gravitational acceleration of the earth.
Ans. 8
28. In fluid mechanics, this shows that the pressure of a fluid decreases as the speed of the fluid
increases. In addition, the pressure of a fluid decreases as the elevation increases..
29. In electrodynamics, what term refers to average speed of the charge carriers?
30. It is a measure of the stiffness of a material determined by the slope of the straight line portion
of the stress-strain curve.
33. It is the internal resistance offered by a unit area of the material from which a member is made
to an externally applied load.
Ans. Stress
34. The ____ is the value of stress on the stress- strain diagram curve at which the curve first
deviates from a straight line.
35. It is the value of stress on the stress-strain curve at which the material has deformed plastically;
that is, it will no longer return to its original size and shape after remaining the load.
36. It is the value of stress on the stress-strain curve at which there is a significant increase in strain
with little or no increase in stress.
37. A ductile material is one that can be sheltered, formed, or drawn to a significant degree before
fracture. A metal that exibit a percent elongation greater than _____ is considered to be ductile.
Ans. 5%
Ans. ½
41. This material have a large number of non—localized electron as an effect, are very good
conductors of electricity and heat.
Ans. Metals
42. Materials composed of more than one material type and are designed to display a combination
of the best charactericstics of each component material.
Ans. Composites
43. A material whose atomic arrangement occurs as periodic repeating structure over large
distance.
Ans. Crystalline
44. An elemental solid having a different crystal structure usually due to the prevailing temperature
and pressure.
Ans. Allotrope
45. Stainless steel results when this metal is alloyed with steel to give it corrosion resistance
properties.
Ans. Chromium
46. These element is used in modern super strong permanent magnet because of their high
coercivities.
Ans. Neodymium
47. The deterioration of an engineered material due to interaction with diversed environment
which lead to the degradation of its material properties.
Ans. Corrosion
48. It is the process of attracting potential employees to the company so that the selection process
can be carried out.
Ans. Recruitment
49. This is a method of managing all the activities that affect the quality of goods and services in
order to prevent faults.
50. This type of business organization exist when there are anumber of people involved who are
part owners of the business.
Ans. Partnership
51. This process can be used to measure achievement in Total Quality Management.
Ans. Benchmarking
52. Provides the essential control and measure of feedback loop necessary for quality improvement.
Ans. Benchmarking
53. It is the name given to any activity undertaken by the organization with the express purpose of
gaining information about potential customer.
Ans. Market research
54. What is the most widely used charts in management of scheduling and control of projects.
56. R.A 9292 was a consolidation of House Bill _____ and Senate bill _____.
57. According to section 43, R.A 9292 shall take effect _____ following its full publication in the
______ or any newspaper of general circulation.
58. Which of the following is not true for the qualification of board members of Electronics
Engineering.
Ans. Be a citizen and resident of the Philippines for 5 consecutive years prior to his/her appointment
59. All records of the board including application for the examination administrative cases involving
PECE,ECE and ECTs shall be kept by.
60. The member of the board shall hold office for a turn of _____ years from date of appointment or
until their successors shall have been appointed and qualified and maybe reappointed once for another
term.
Ans. 3 years
61. It is the ratio of work performance to the work schedule.
Ans. 16
a. Moisture Resistant
b. Chemical Resistant
64. As the proton moves together what will happen to their potential energy.
Ans. Increases
Ans. Section 35
66. Beta-decay
Ans. The number of protons decreases by one but the neutrons remains the same
67. When the electron and photons have the same wavelength they are also have the same ____.
Ans. Momentum
68. What hard magnetic material are used in audio phones?
Ans. Ferrites
71. When the manager has more time outside his office and transacting to the different key people.
72. Microwave is frequently used in atomic and molecular structure atoms and in radar because it
has _______.
73. What are the rays that can penetrate the earth’’s surface?
a. Gamma Rays
b. X-Rays
c. Visible Rays
d. Infrared
Ans. Microwave
76. The line Paschen series of hydrogen atom in radio spectrum is known as ____
Ans. Infrared
77. At constant temperature the volume of gas is inversely proportional to the pressure this is
known as _____
78. “Entrophy change for any chemical reaction is independently of the intermediate stages
provided the initial and final conditions are the same for each work”. This statement is known as _____.
79. In project management it is used to know the start and finish time of a project.
80. In project management it is the shortest time to finish the project by using only the available
resources.
84. Why does electron microscope has higher magnification than optical microscope?
Ans. Because the wavelength of electron is shorter than the wavelength of a visible light
Ans. Lead
91. Magnets which are composed of salt and oxide
Ans. Anti-Ferromagnetic
Ans. Palladium
Ans. E/2
95. What refers to the measure of an atom’s tendency to attract an additional electron.
98. The members of the Board shall hold office for a term of ____ from date of appointment or until
their successors shall have been appointed and qualified and may be reappointed once for another
term.
Ans. 3 years