Scribd
Upload
13 views

Zigbee Motion Detector v1.0 - Product Specification

The document is a technical datasheet for a Zigbee motion detector that has the following key specifications: 1) It is a Zigbee HA 1.2 compliant motion detector that detects motion within a 10m x 6m range up to 10m away. 2) It has a battery life of approximately 2 years using a CR2450 battery, and can detect motion angles of up to 110 degrees. 3) It connects to Zigbee networks and supports configurations like detection delay times, modes, and resets.

Uploaded by

Mulia Sulistiani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

Zigbee Motion Detector v1.0 - Product Specification

The document is a technical datasheet for a Zigbee motion detector that has the following key specifications: 1) It is a Zigbee HA 1.2 compliant motion detector that detects motion within a 10m x 6m range up to 10m away. 2) It has a battery life of approximately 2 years using a CR2450 battery, and can detect motion angles of up to 110 degrees. 3) It connects to Zigbee networks and supports configurations like detection delay times, modes, and resets.

Uploaded by

Mulia Sulistiani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATASHEET

2018-06-13 Zigbee Motion Detector v1.0

Designation Zigbee HA 1.2 Motion Detector


1 811 470 – US plug
1811681
References – Zigbee
(Type A) Motion Detector
1 811 471 – EU plug
Range Zigbee
(Type C)HA 1.2

FUNCTIONS

Somfy ZigBee Temperature & Humidity Sensor is designed for use


with scenes in home automation systems under ZigBee 3.0 protocols,
the Temperature & Humidity Sensor Sensor lets you know the ambient
temperature and humidity to trigger different actions to make you more
comfort.

This device is compatible with SOMFY gateway (i.e. TaHoma BEE) or


devices for remote control & interoperation.

Dimension: 84.4mm x 63.4mm x 26.3mm


Weight: ~ 30g±5%

TECHNICAL SPECIFICATIONS
Model 1811681
Power Supply 3V dc, CR2450 x 1
Product Package Zigbee Motion Detector x 1
Detective Angle 110⁰
Detective Coverage 10m x 6m @ 110⁰
Mounting Method Screws or 3M Tape
Mounting Height 2.0m to 2.6m above the ground
RF Protocol ZigBee HA 1.2
Radio Frequency 2.4GHz
Maximum RF Power <10dBm
RF distance 40 meters
* RF distance would be affected by specific material, such as mirror,
metal, or high power electronic devices
Battery Life ~ 2 years (Determined under 4 times per day)
*Subject to change for the use frequency
Low Battery Detection Support to send the “Low Battery” status to the Gateway
Operating Temperature -10⁰C - 45⁰C
Relative Humidity 10% - 85%
Dimensions 84.4mm x 63.4mm x 26.3mm
Weight ~ 30g
DECRIPTION OF USE

Installation:

Remove the bracket from the detector & install the battery (i.e. CR2450 x 1). The detector can be
mounted by screws or 3M adhesive tape.

Motion Detector will be in pairing status when power turns on at the first time. This will cause a LED
indicator to flash once per second. If sensor enrolled successfully, it will stop blinking and stay on for
10 seconds.

Mounting Height for the Motion Detector recommends in 2m ~ 2.6m above the ground.

Use your product:

After powered ON the detector, press & hold the key for 3 seconds to reset the detector, LED indicator
will blink quickly (100ms ON & 100ms OFF).
Once release the key, the detector will reset to factory default setting and the signal light blinks once
per second to search a new enabled zigbee network. If detector enrolled successfully, it will stop
blinking and stay on for 10 seconds then turn off;
If no available networks were found within 3 minutes, detector will stop blinking and turn off.

Reset procedure deletes memory, including all information on the ZigBee network and the gateway.

Set Mode Switch : 24-hour mode & Night mode

Off Delay time Switch: 1, 5 or 10 minutes

APPLICABLE STANDARDS

Safety & Health: IEC/EN60950-1, EN62479


EMC compliances: EN301 489-1, EN301489-17
Radio compliances EN300 328
Sustainability: RoHS 2.0, REACH

You might also like