Scribd
Upload
75 views2 pages

Ambersil Copper High Temperature Anti Seize Paste TDS

Copper Anti-Seize Paste is a high temperature anti-seize lubricant made of micronized copper and additives suspended in oil. It prevents metal parts from seizing or corroding together at temperatures up to 1100°C. It assists with easy disassembly of threaded parts even after long use. The paste is lead-free, nickel-free, and resistant to water, creating an effective seal in corrosive environments.

Uploaded by

jawnuolis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
75 views2 pages

Ambersil Copper High Temperature Anti Seize Paste TDS

Copper Anti-Seize Paste is a high temperature anti-seize lubricant made of micronized copper and additives suspended in oil. It prevents metal parts from seizing or corroding together at temperatures up to 1100°C. It assists with easy disassembly of threaded parts even after long use. The paste is lead-free, nickel-free, and resistant to water, creating an effective seal in corrosive environments.

Uploaded by

jawnuolis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA By CRC Industries

COPPER ANTI-SEIZE PASTE


HIGH TEMPERATURE ANTI-SEIZE LUBRICANT
Copper Anti-Seize Paste is a high temperature anti-seize
lubricant. A soft, copper-coloured paste, based on micronised
copper and synergistic anti-oxidant, anti-corrosion and anti-
wear additives suspended in a premium grade oil. It is an
effective anti-seize formulation, preventing metal-to-metal
contact, seizing, galling, and fretting corrosion.
Assists with easy disassembly of threaded parts, gaskets and
flanges, even after long operational periods.
Threaded parts remain in good condition and can be re-used.
Copper Anti-Seize Paste is resistant to hot and cold water. It
is lead-free and nickel-free and offers excellent sealing even in
corrosive atmospheres. Aerosol formulation does not contain
chlorinated solvents.

Lubricants PRODUCT CODES / FILL SIZES

30303 / 400ml 30239 / 500g

APPLICATIONS
An effective anti-seize lubricant for:
• Bolts, nuts, pins • Pipeline connections
• Screw connections on • Exhaust screw connections
hydraulic equipment • Linkages
• Bushings, fittings • Sliding sleeves / shafts
• Splines • Press fits
• Flanges, flange seals

DIRECTIONS
• Do not use on energised equipment, oxygen systems or in
presence of acetylene.
• Use aerosol only in ventilated areas.
• The surfaces to be treated should be clean, dry and grease-
free. Wire brush scaled parts and clean with an oil-free solvent
like Amberklene FE10.
• A thin, even film should be applied either by spraying or by
brushing.
• Avoid mixing with other products.

Page 1 / 2
TECHNICAL DATA By CRC Industries

TECHNICAL DATA (WITHOUT PROPELLANT)


Appearance Homogenous, copper colored
Aerosol properties
Flash point (open cup) < 0°C
Boiling range (solvent) 60-95°C
Vapour density (vs. air=1) 3
Specific gravity @ 20°C 0.81
Coefficient of friction
(Erichsen test apparatus, 8.8 grade phosphated μ at thread: 0.14, μ at head: 0.08
steel, M12 thread)
Dry film properties
Specific gravity @ 20°C 0.99
Flash point (open cup) > 200°C
Dropping point none
NLGI consistency 1-2
Low temperature stability -30°C
Temperature resistance * - lubrication 300°C
Temperature resistance * - anti-seize 1100°C
Hot water resistance (DIN 51807 T1, 40°C, 90°C) 1
Corrosion (DIN 51802) 0/0
Four Ball Wear (DIN 51350 T5, 1h, 500N) 0.5 mm
* Grease decomposition temperature is 300°C. Anti-seize properties of copper particles are conserved up to approximately 1100°C.

MATERIALS COMPATIBILITY
OK -
CAUTION Test before use on plastics or rubber.
NOT OK -

STORAGE & SHELF LIFE


The product may be stored at normal ambient temperatures and has a shelf life of not less than 4 years with
correct storage. Aerosols should always be stored below 50°C, away from direct heat and naked flame.

HEALTH AND SAFETY


A separate Safety Data Sheet (SDS) according to EC Regulation 73/404/EEC and 648/2004/EC is available
from Ambersil.com or via [email protected]

MISREPRESENTATION ACT 1967 TRADE DESCRIPTIONS ACT 1968


The information given in this publication is based on our experience and reports from customers. There are
many factors outside our control and knowledge which affect the use and performance of our products and
for which reason no warranty is given, express or implied. Users should make their own tests to determine
the applicability of such information or the suitability of any products for their own particular purposes.
Statements concerning the use of the products described herein are not to be construed as recommending
the infringement of any patent and no liability for infringement arising out of any such use is to be assumed.

Version 3.1
Created: July 2019
Updated: October 2020

CRC Industries UK Ltd. t +44 (0)1278 727200


Wylds Road,Bridgwater f +44 (0)1278 425644
Somerset, TA6 4DD e [email protected]
United Kingdom w www.ambersil.com
Company Registered No. 04910479 VAT No. GB 821 5195 42

Page 2 / 2

You might also like