Scribd
Upload
73 views

Steam Generator

The document discusses a steam generator and its capabilities. The steam generator is provided by Coates Offshore and can generate 200 HP of 6.9 MMBTU/HR quality steam at 150 psi for well testing. It offers the best heat transfer technology for well testing onshore or offshore. The steam generator is suitable for deep water environments and is used to rapidly heat high pressure and high flow rates of gas or oil through heat transfer. It has a capacity of 200 horsepower and can generate 6.9 MMBTU/HR of steam at 150 PSI.

Uploaded by

Abdul Hafeez Akram
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
73 views

Steam Generator

The document discusses a steam generator and its capabilities. The steam generator is provided by Coates Offshore and can generate 200 HP of 6.9 MMBTU/HR quality steam at 150 psi for well testing. It offers the best heat transfer technology for well testing onshore or offshore. The steam generator is suitable for deep water environments and is used to rapidly heat high pressure and high flow rates of gas or oil through heat transfer. It has a capacity of 200 horsepower and can generate 6.9 MMBTU/HR of steam at 150 PSI.

Uploaded by

Abdul Hafeez Akram
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Production Testing

STEAM GENERATOR
The TETRA Steam Generator is provided by Coates Offshore and has a capacity of 200
HP of 6.9 MMBTU/HR quality steam @ 150 psi to TETRA’s Conventional Heat Exchanger,
which offers the best heat transfer technology for well testing services, onshore or
offshore.
SURFACE EQUIPMENT

In deep water environments, utilizing steam is the safest and best method for achieving the
rapid heating of high pressure and high flow rates of gas or oil. This method of heat
transfer is used in both production and well testing.

The boiler package should be matched to heat exchanger, based on heating requirements.

 Offshore and onshore operations


 Deep water oil and gas well testing
 High volume gas and oil wells
 High pressure wells
 Production platforms
 Frac flow back operations
 Early production facilities and extended
appraisal testing
 Wellsite intervention services

 Self-contained water tank and


return hot water tank
 Level indicator, sight glasses
 Flame safe guard controls
 Low water cut-off controls
 Auxiliary low water cut-off with
normal reset
 Steam pressure gauge and test
connections
 Manual, auto, and modulating
pressure controllers
 Fuel pressure controller and auto
starve shutdown
Production Testing
STEAM GENERATOR

Horsepower (bhp) 200

Steam Output (mmbtu/hr) 6.9

Operating Pressure (psi) 150

Heating Surface (ft2) 1,110

Operating Water Content (lbs) 12,150

Fuel Type Diesel

Total Shipping Weight (lbs) 33,000

Temperature Range (F) 450

Connections

Steam Outlet 2” FIG 206 Union

Feed Water Inlet 2” FIG 206 Union

Skid Dimension (L x W x H) 20’x 8’x 10’

Reliefs 2 – 1½” PSV set @ 150 psi

Electrical 410 Volt 60 Cycle, 3 Phase


ESD pressure switch, N2 electrical purge system, fire loop,
Safety System gas tech shutdown, multiple electrical disconnect panel,
shipboard electrical cable
ASME/ API 14C / DNV / NACE MR0175/ USCG MMS
Boiler Certification
Lloyds’ Register/ API load tested

STG-0811-B

You might also like