0% found this document useful (0 votes)
935 views49 pages

AHU-02 Submittal Saivar Rev-02

This document contains technical submittals for an air handling unit (AHU-02) for an updated warehouse located in El Sadat City, Egypt. It includes replies to consultant comments, a material list, and data sheets. The main contractor is RME and the consultant is Cosmos Consultant.

Uploaded by

Hossam Attef
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
935 views49 pages

AHU-02 Submittal Saivar Rev-02

This document contains technical submittals for an air handling unit (AHU-02) for an updated warehouse located in El Sadat City, Egypt. It includes replies to consultant comments, a material list, and data sheets. The main contractor is RME and the consultant is Cosmos Consultant.

Uploaded by

Hossam Attef
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 49

Project: MDF Factory

Location: El Sadat City, Monufia, Egypt

Consultant: Cosmos Consultant

Main Contractor: RME.

Technical Submittal
For

AHU-02
For updated warehouse

Rev. (02)
Saivar
Table of Content
AHU-02

Table of Contents

SECTION DESCRIPTION

1 Replies to the consultants’ comments

2 Material List

3 Data sheets

4 Reference List
SECTION (1)
Replies to the consultants’ comments
Replies to consultant

Consultant Comment Reply

TSCU-20 cooling performance at difference & Room condition table is not included
1 Kindly find the attachment.
in the catalogue.

The system electrical control wiring diagram including the intercommtion


2 Kindly find the attachment.
between the condensing unit and the AHU in not submitted.
SECTION (2)
Material List
SECTION (3)
Data sheet
22/08/2022 DATA SHEET
Altitude Nexus-1 ver.652.5059(E) 24/09/2020
0 (m) 29/01/2023 2042307318-63CD1F85
NXSCSTSVRI-L086
Project Model
MDF FACTORY A1(E)1450H-1600W
Ref. Flow
AHU-03, ST-122-45, 6970 CFM, QTY-1 3.29 m3/s
01 FA DAMPER 625 x 1000 mm 03 FA DAMPER 315 x 100 mm 04 G2+F8 05 P40-16ED 5R-30T-1200A-3.0Pa Cu/Al

08 RDH 500 R - 1441 RPM - 5.50 kW


505 315

003

331
413
1450 x 1600

638
005 009
625

001 004 008


733.1

481
412

006
100

600

840 679 320 1761

3600

002 007
229
300

481
701.0
750

010 012
1600

1000

100

638
1200

011 013
750

481
300

171

PANELS / FRAME Break out Airborne sound power (dB)


Panels A 125 Hz 250 Hz 500 Hz 1 KHz 2 KHz 4 KHz 8 KHz
PART CODE PU6055ST
Insulation PUFOAM 68.7 71 68 67 65 39 37 31
Model Box Mechanical characteristics (EN1886)
Preplasticized steel sheet
External sheet CN6--06 Casing strength Casing air leakage Thermal transmitt. Thermal bridging
0.6 mm - GREY N6 L2(M)(+700Pa)
Galvanised Steel
D1(M) L1(M)(-400Pa)
T2 TB2
Internal sheet CZINC06 SFPint [W/(m3/s]
0.6 mm -
185
ALUMINIUM FRAME PR55 ERP Id code

BASE FRAME CBZN{ H = 100 mm } NRVU-UVU


Eff. VU[51.1%)
53.4 %
Ext. leak rate +400/-400Pa
0.37 %
NOTE :

- Upgraded to pre painted External sheet

Total weigth

866 kg
22/08/2022 SOUND DATA
Altitude Nexus-1 ver.652.5059(E) 24/09/2020
0 (m) 29/01/2023 2042307318-63CD1F85
NXSCSTSVRI-L086
Project Model
MDF FACTORY A1(E)1450H-1600W
Ref. Flow
AHU-03, ST-122-45, 6970 CFM, QTY-1 3.29 m3/s

003

009
005
001 004 008

733.1

006

IN-DUCT SOUND POWER LEVEL dB


125 250 500 1000 2000 4000 8000 A
INLET 78 77 71 60 51 47 47 72.2
004 G2+F8 -3 -4 -7 -10 -11 -14 -14
005 P40-16ED 5R-30T-1200A-3.0Pa Cu/Al -2 -3 -3 -3 -4 -3 -3
008 RDH 500 R - 1441 RPM - 5.50 kW 90 91 89 83 76 70 64 89.6
OUTLET 90 91 89 83 76 70 64 89.6

AIRBORNE SOUND POWER LEVEL dB


125 250 500 1000 2000 4000 8000 A
71 68 67 65 39 37 31 68.7
22/08/2022 DATA SHEET
Altitude Nexus-1 ver.652.5059(E) 24/09/2020
0 (m) 29/01/2023 2042307318-63CD1F85
NXSCSTSVRI-L086
Project Model
MDF FACTORY A1(E)1450H-1600W
Ref. Flow
AHU-03, ST-122-45, 6970 CFM, QTY-1 3.29 m3/s

FA DAMPER 625 x 1000 mm


Flow Dimensions Air vel. Pressure drop
3.14 m3/s 625 x 1000 mm 5.02 m/s 15 Pa
Damper Flexible connectionLouvre Moteur 8x8 STEEL MESH FROST STAT
Yes No No NO NO NO
001

NUMBER OF DRIVING SHAFTS FITTING OF SMOKE DAMPERS


1 NO

ACCESS DOOR
Dimensions
1340 x 765 mm Handles
002

FA DAMPER 315 x 100 mm


Flow Dimensions Air vel. Pressure drop
0.15 m3/s 315 x 100 mm 4.87 m/s 14 Pa
Damper Flexible connectionLouvre Moteur 8x8 STEEL MESH FROST STAT
Yes No No NO NO NO
003

NUMBER OF DRIVING SHAFTS FITTING OF SMOKE DAMPERS


1 NO

FILTERS
STAGE # Air Volume CLASS TYPE QTY. FULL SIZE QTY. HALF SIZE LENGTH MM Energy Class

1 3.29 m3/s G2 PANEL 4 0 48 NA

2 3.29 m3/s F8 BAG 4 0 535 NA


Frame

Galvanised Steel
1 2
Clean Final Avg Clean Final Avg
21 Pa 63 Pa 42 Pa 98 Pa 198 Pa 148 Pa
100 Pa
004

300 Pa

200 Pa
50 Pa

100 Pa

1 m/s 2 m/s 3 m/s 4 m/s 1 m/s 2 m/s 3 m/s 4 m/s

As per EU reguation 1253/2014 (ERP) pressure monitor transducer is mandatory. As it is not selected please make sure it is provived by the control supplier
22/08/2022 DATA SHEET
Altitude Nexus-1 ver.652.5059(E) 24/09/2020
0 (m) 29/01/2023 2042307318-63CD1F85
NXSCSTSVRI-L086
Project Model
MDF FACTORY A1(E)1450H-1600W
Ref. Flow
AHU-03, ST-122-45, 6970 CFM, QTY-1 3.29 m3/s

COOLING COIL

Flow Qty Model Air dens.


3.29 m3/s 1 P40-16ED 5R-30T-1200A-3.0Pa Cu/Al [ 0 mt ] 39.53 dm3 148.86 m2 1.225 kg/m3

Air side DB WB UR Tootal load Sensible load Air vel. Pressure Drop PSYCHROMETRIC CHART 100 29

0 mt ABOVE SEA LEVEL 28


30

- Barometric pressure 101.325 kPa 27


90
26

25

80 24
005

In 27.94 °C 18.33 °C 39.32 % 110 Pa 70


23

22

1x68.0 kW 1x60.2 kW 2.28 m/s /kg


25
21

20

Out 13.29 °C 89.71 % (110 Pa) En


tha
lpy
kJ 60 19

18

Humidity ratio g/kg


17
50
16

- 40
ture
20
°C
15

14
ra
pe 13
tem
on 12
rati
R407C
30
Evap. temp. Pressure drop NC GAS Connection size S atu 15 11

10

20 9

7.200 °C 8.5 kPa 2 42 10 8

7
10
6
5
5

0 0 4

-10 -5 0 5 10 15 20 25 30 35 40 45 50
Dry bulb temperature °C

Fins material Tubes material Headers Frame Flange Counterflange

15 [email protected] [email protected] Copper Galvanised steel NO NO [1000][ 4.38RT][2][53][21.0]

DRAIN PAN
006

Material Drain size


C304-12 DN32 1-1/4” ISO 7/1

ACCESS DOOR
Dimensions
1340 x 500 mm Handles + Window + Lamp
007
-

22/08/2022 DATA SHEET


Altitude Nexus-1 ver.652.5059(E) 24/09/2020
0 (m) 29/01/2023 2042307318-63CD1F85
NXSCSTSVRI-L086
Project Model
MDF FACTORY A1(E)1450H-1600W
Ref. Flow
AHU-03, ST-122-45, 6970 CFM, QTY-1 3.29 m3/s

(Nsys ERP=53.4% [44.1%])


FAN MOTOR V-BELT DRIVE ACCESSORIES 3500
15.00 22.00

3000
11.00
Model Fan pulley
Belt drive
1 x RDH 500 R +BU161035 8.00

Flow 2000 6.00


1 x 3.29 m3/s

kW
Fan outlet vel. 4.00
8.08 m/s 3.35
3.00
Ext. static Nominal motor power
375 Pa 5.50 kW 1000
2.00
Min. I.P.D. motor RPM
258 Pa + 0 Pa 1460(400V-3PH-50HZ) 1.50

Static pressure
Max I.P.D. 1.00
400 Pa + 0 Pa 0.80
500
Avg. I.P.D.
329 Pa + 0 Pa 0.60
400

Avg. I.P.D. 3500


329 Pa + 0 Pa 300

Total static pressure


704 Pa 2800
200
RPM
008

1441 rpm
1600 2500

R PM
2300
Eff. 1441
1400
79.4 2100
1000
Shaft power[0.00] 100
1200
1 x 3.35 kW
800
900 1800
80
-5% -2.5% 100% +2.5 +5% 0.7 1.0 2.0 3.0 4.0 5.0 10.0 18.0 m3/s
capacity

Air volume M3S 3.13 m3/s 3.21 m3/s 3.29 m3/s 3.37 m3/s 3.45 m3/s

Total static pressure Pa 729 716 704 687 672


Shaft power kW 3.010 3.046 3.349 3.114 3.145
Electrical Power Input kW 3.897 3.944 4.335 4.031 4.071
1.018
1.318
In-duct sound power (dB)
A 125 Hz 250 Hz 500 Hz 1 KHz 2 KHz 4 KHz 8 KHz
-
OUT 89.6 90 91 89 83 76 70 64
-
IN 83.8 81 88 79 76 74 69 64
The fan system effect is taken into account in the fan performances. Fan has been designed with internal
static pressure calculated based on wet condition for cooling coil(if any).
22/08/2022 PSYCHROMETRIC CHART
Altitude Nexus-1 ver.652.5059(E) 24/09/2020
0 (m) 29/01/2023 2042307318-63CD1F85
NXSCSTSVRI-L086
Project Model
MDF FACTORY A1(E)1450H-1600W
Ref. Flow
AHU-03, ST-122-45, 6970 CFM, QTY-1 3.29 m3/s

PSYCHROMETRIC CHART 100 29

0 mt ABOVE SEA LEVEL 28


30
Barometric pressure 101.325 kPa 90
27

26

25

80 24

23

22
70
21
25
20
/kg
kJ 60 19
lpy
tha 18
En

Humidity ratio g/kg


17
50
16

20 15

40 °C
re 14
r atu
pe 13
tem
on 12
30 ati
tur 15 11
Sa
10

20
A05
9

10 8

7
10
6
5
5

0 0 4

-10 -5 0 5 10 15 20 25 30 35 40 45 50
Dry bulb temperature °C

Inlet Outlet
Dry Bulb Wet Bulb Rel. Humidity Enthalpy Abs. Humidity Dry Bulb Wet Bulb Rel. Humidity Enthalpy Abs. Humidity Total Load Sensible Load

°C °C % kJ/kg g/kg °C °C % kJ/kg g/kg kW kW

A05 27.94 18.33 39.32 51.67 9.23 13.29 12.33 89.71 34.90 8.52
22/08/2022 FAN OPERATING POINT
Altitude Nexus-1 ver.652.5059(E) 24/09/2020
0 (m) 29/01/2023 2042307318-63CD1F85
NXSCSTSVRI-L086
Project Model
MDF FACTORY A1(E)1450H-1600W
Ref. Flow
AHU-03, ST-122-45, 6970 CFM, QTY-1 3.29 m3/s
Item Model Air Volume Static Press. RPM Shaft power

008 RDH 500 R 3.29 m3/s 704 Pa 1441 3.35 kW


3500
22.00
15.00

3000
11.00

8.00

2000
6.00
kW

4.00

3.35

3.00

1000

2.00

1.50

1.00
Static pressure

500 0.80

0.60
400

3500

300

2800

200

1600
2500
M
RP

1441 2300

1400

2100

1000

100
1200
800

900
1800

80
0.7 1.0 2.0 3.0 4.0 5.0 10.0 18.0 m3/s
capacity
Air Cooled Condensing Units

TSCU
Air Cooled
Condensing Units
R407C
Air Cooled Package Unit

Content page

Guide Specifications................................................ 2

Unit Components..................................................... 5

Technical Data.......................................................... 6

Cooling Performance Data..................................... 9

Dimensional Data ................................................... 15

Electrical Data ........................................................ 18

Wiring Diagram........................................................ 19
Guide Specifications
General
Saiver Egypt Air Cooled Condensing units 30 to 100 tons have been developed to provide comfort air conditioning for all
various applications such as banks, hotels, shopping malls, schools, hospitals, show rooms, private villas & office buildings

Casing & Structure


Casing is made of Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process Coating G90 phosphates and baked after
an electrostatic powder coat of approx.60 microns. This finish and coating can pass a 1000 hours in salt spray testing at
95°F (35°C) and 95% relative humidity as per ASTM B117-95.
Removable panels provide access to all internal parts which provide easy maintenance.

Refrigerant Circuit
Entirely deoxidized dehydrated copper tubes with joints brazed Sliver brazing alloys. From 30TR to 50 TR are four
refrigerant circuits design ensures partial load operation. Pumping down valves fitted in liquid lines to be enabling
refrigerant to be temporarily stored in the condenser coil if the refrigerant is to be repaired or some part of the
refrigeration system to be replaced.

Condenser Coils
Condenser coils are manufactured of seamless copper tubes mechanically bonded to aluminum fins to ensure optimum
heat transfer All coils are tested against leakage by air pressure of 450 psig (3100 kPa) under water. All standard coils are
2-3 or 4 rows/14 FPI, 3/8” (9.5 mm) O.D. tubes. An integral sub cooling circuit is provided to increase the cooling capacity,
without additional operating cost. For different application requirements, other optional condenser fin materials are
available:
• Copper fins.
• Electro tinned Copper Fins.
• Copper finned coils with electro-tinned after manufacturing.
• Pre-coated Aluminum fins
The pre-coated is hydrophobic polyurethane resin. This option provides substantial corrosion protection beyond
standard coil construction.
• Aeris Guard Coil Coating

Condenser Fan/Motor
Axial fan internally protected Motors with IP 55 Class F insulation. The condenser fans are individually statically and
dynamically balanced at the factory.
Complete fan assembly is provided with suitable acrylic coated fan guard

Compressors
Features of scroll compressors used in Saiver Egypt products:
• Low sound compressors. • (Low discharge pulse levels which insures quite operation).
• High efficiency. (High-energy efficiency rating) • Low foaming mineral base lubricant.
• Crank case heater for all models. • Suction gas motor cooling.
• External overload protection. • Digital protector for each compressor (optional).
• Internal overload (thermal protection). • Compressor jacket (optional).
• External backed enamel finished provides rust protection.

2
Guide Specifications
Contactor
This contactor is mainly used for controlling three phase motors.
Note: The unit should contain all the required contactors to start all motors such as (compressors, condenser fan and
evaporator fan motors).

Motor protector phase failure (MPFR)


The function of this device is to protect the unit in the following conditions:
Phase sequence protection. • Phase failure.
•Over voltage protection. • Under voltage protection
• Voltage unbalances protection. • Over current protection.
•Under current protection. • Current unbalance protection.
•Over frequency protection. • Under frequency protection.
The controller will give an alarm signal in case any of the above condition occurs, to indicate the fault
condition. The PFR has a small indication LED to indicate its status.
Note :The under voltage tripping occurs at a deviation of 6% of the nominal voltage

Over load relay (OL) for three-phase power supply


The terminal over load relay is used with the contactor to provide protection for the motors from operating
over the full load current.
Read the following:
1. Current setting potentiometer: to be rotated to the rated optional current of the load.
2. Reset push button: to reset the device after it has been tripped.
3. Test key: to check the operation of the protection function. This test is carried out when the device is ON as below:
• Move the test key with the direction indicated on the device (using a screw driver). For successive operation then
must be tripped.
• To reset the circuit manually just press the “reset” push button.
• If the protection function is failed change the device.

Digital Multi-Meter (Optional)


This device is used to monitor the performance of the unit as following.
• Line to line voltage. • Current drawn by the unit.
• Power factor. • Line to neutral voltage.
• Frequency. • Active power.
• Reactive power. • VA.

Digital protector (OPTIONAL)


This function of this device is to monitor the performance of each compressor and protect it as following.
• Phase sequence is not suitable. • Phase failure.
• Over voltage protection. • Under voltage protection
• Voltage unbalances protection. • Over current protection.
• Under current protection. • Current unbalance protection.
• Over frequency protection. • Under frequency protection.

3
Guide Specifications
Electricals/Controls
All units are completely factory wired with all necessary controls and safety devices.

Microprocessor controller (optinal).


All TSCU series condensing units are equipped with a full function microprocessor
based controller as a standard feature. The controller is factory programmed for
the control of AHU fan motor, compressors & condenser fans. The controller
comes with a built in keypad and display for simple but meaningful man machine
interface. This controller provides complete operational control for the unit & has
built-in auto diagnostic capability that can signal normal operation or alarm
Microprocessor Controller
conditions as well as shutting down the unit or system if necessary.

The controller comes with a loose supplied sleek and elegant design room unit for
installing in the conditioned space. Communication between unit controller and
room unit is through two wire interface. The communication cable should be 2
core, twisted pair, unscreened with stranded conductors. Maximum distance
between room unit and controller can be 700 meters. The room unit has a built in
sensor for measuring the room temperature. It transmits room temperature, set
point, unit operating mode, operating schedule etc. to the unit controller. Room Unit
Control of the compressors is based on room temperature and the set point, as
standard.

The Main Features of the controller are as follows:


• Built in LCD display with back light. • Roll & push knob and 3 function buttons.
• Battery backed up built in real time clock. • Alarm history.
• A sleek & elegant design room unit. • Capacity control based on room temp. or return air temp.
• Multiple authorization level to provide tight security for the control system.

Display Information
Tiba TSCU series condensing units offer LCD display which allows the operator to access different parameters of the unit.
Operator can view and change the unit parameters. The display information includes:
• Status • Outputs
• Inputs • Alarms
• Set points • Password

Filter Drier (disposal type)


Moisture will enter a system any time it is operated for field services. A filter drier is a very effective method for removing
small amounts of moisture and contamination. It is installed in the refrigerant liquid line, so that the entire refrigerant in
the circulation passes through the drier, each time it circulates through the system.

4
Unit Components

Condenser
Axial Fan

Controller
Electric
Box

Contactor

Over
High Load
Pressure
Protector
Casing Filter Drier
& Structure Condenser Coil
Compressor

5
Technical Data
MODEL TSCU-7.5 TSCU-10 TSCU-12.5 TSCU-15 TSCU-20 TSCU-25
Power supply 4 pole 3 Phase / 50 Hz /
BTU/Hr 102,500 131,750 155,125 380v 205,000 263,500 310,250
Nominal Cooling Capacity KW 30.04 38.61 45.4 60.08 77.2 90.9
TR 8.54 10.98 6
12.9 17.08 2
21.9 3
25.8
No of Gas Circuit 1 1 3
1 2 6
2 5
2
COMPRESSOR FOR MODULE
POWER SUPPLY V/3PH/50HZ 380 - 400
MINIMUM VOLTS - MAXIMUM VOLTS 340 - 440
TYPE Hermetic - Scroll
No Of COMPRESSOR / MODEL 1 1 1 2 2 2
ELECTRICAL DATA FOR ONE COMPRESSOR
Rated Load Amps ( RLA ) 20.7 20.5 24 20.7 20.5 24
Maximum Continuous Current ( MCC ) 29 35 34 29 35 34
Locked Rotor Amps ( LRA ) 118 140 174 118 140 174
Crankcase Heater Power Supply 230V / 1Ph / 50Hz
Crankcase Heater Type Belt Type
No Of Crankcase Heater / MODEL 1 1 1 2 2 2
Power Input per Compressor KW 8.99 11.45 13.6 8.99 11.45 13.6
MECHANICAL DATA
Swept Volume in³/rev 10.17 13.22 15.25 10.17 13.22 15.25
Displacement at 2900 RPM cfh 1024 1331 1536 1024 1331 1536
Maximum System Test Pressure Psi 363 / 595 363 / 595 363 / 595 363 / 595 363 / 595 363 / 595
Maximum Differential Pressure Psi 348 348 348 348 348 348
Suction Diameter inch 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8
Discharge Diameter inch 7/8 7/8 7/8 7/8 7/8 7/8
Oil Equalization Connection 3/8” Flare SAE
Oil Type Mineral – 160 P OM3 oil Mineral – 160 P Mineral – 160 P OM3 oil Mineral – 160 P
Oil Quantity per Compressor Lit / OZ 3.38 / 114 3.38 / 114 3.38 / 114 3.38 / 114 3.38 / 114 3.38 / 114
Refrigerant charge Limit per kg 10 12.7 13.6 10 12.7 13.6
Compressor
Net Weight per compressor kg 73 64.9 100 73 64.9 100
CONDENSER FAN / MOTORS
Power Supply V/3Ph/50Hz 380 - 400
Fan Type Axial
Quantity 1 1 1 2 2 2
Input watts per motor W 736
Maximum Current per motor A 2.2
Speed RPM RPM 1325
Windings Insulation class F
CONDENSER COIL
Total Face Area / Coil m² 1.69 1.69 1.69 1.69 1.69 1.69
Total Coils Quantity 2 2 4 4 4 4
Tube Diameter inch 3/8"
Type / Material Tubes-Fins Grooved / Copper Tubes – Corrugated Aluminum Fins
Number of rows 2 3 4 2 3 4
Number of circuit per one Double coil (V) 4 6 8 4 6 8
Number of fins per inch 14 14 14 14 14 14
Width 1022 2045
Depth 1434
MODEL DIMENSIONS (mm) Height 1675
Height 1800
with Feet
TOTAL NET WEIGHT Kg 338 383 423 676 766 846
REFRIGERANT PIPING LINES
Suction: Qty x Diameter 1 x 1-1/8” 1 x 1-1/8” 1 x 1-3/8” 2 x 1-1/8” 2 x 1-1/8” 2 x 1-3/8”
Liquid: Qty x Diameter 1 x 5/8” 1 x 5/8” 1x 5/8” 2 x 5/8” 2 x 5/8” 2 x 5/8”
* Cooling capacity is based on 45°F saturated temperature and 95°F ambient temperature.
* 1 TR = 12000 Btu/hr 1Kw = 3412 Btu/hr

6
Technical Data
MODEL TSCU-30 TSCU-35 TSCU-40 TSCU-45 TSCU-50
Power supply 4 pole 3 Phase / 50 Hz / 380v
BTU/Hr 410,000 468,500 527,000 573,500 620,500
Nominal Cooling Capacity KW 120.16 137.30 154 168 181.85
TR 34.17 39.04 44 48 51.71
No of Gas Circuit 4 4 4 4 4
COMPRESSOR FOR MODULE
POWER SUPPLY V/3PH/50HZ 380 - 400
MINIMUM VOLTS - MAXIMUM 340 - 440
VOLTS
TYPE Hermetic - Scroll
No Of COMPRESSOR / 4 2 2 4 2 2 4
MODEL
ELECTRICAL DATA FOR ONE COMPRESSOR
Rated Load Amps ( RLA ) 20.7 20.7 20.5 20.5 20.5 24 24
Maximum Continuous Current ( MCC ) 29 29 35 35 35 34 34
Locked Rotor Amps ( LRA ) 118 118 140 140 140 174 174
Crankcase Heater Power Supply 230V / 1Ph / 50Hz
Crankcase Heater Type Belt Type
Crankcase Heater Quantity 4 2 2 4 2 2 4
Power Input per Compressor KW 8.99 8.99 11.45 11.45 11.45 13.6 13.6
MECHANICAL DATA
Swept Volume in³/rev 10.17 10.17 13.22 13.22 13.22 15.25 15.25
Displacement at 2900 RPM cfh 1024 1024 1331 1331 1331 1536 1536
Maximum System Test Psi 363 / 595 363 / 595 363 / 595 363 / 595 363 / 595 363 / 595 363 /
Pressure
Maximum Differential Psi 348 348 348 348 348 348 595
348
Pressure
Suction Diameter inch 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8
Discharge Diameter inch 7/8 7/8 7/8 7/8 7/8 7/8 7/8
Oil Equalization Connection 3/8” Flare SAE
Oil Type Mineral–160 P OM3 oil Mineral–160 P
Oil Quantity per Lit / OZ 3.38 / 114 3.38 / 114 3.38 / 114 3.38 / 114 3.38 / 114 3.38 / 114 3.38 / 114
Compressor
Refrigerant charge Limit per kg 10 10 12.7 12.7 12.7 13.6 13.6
Compressor
Net Weight per compressor kg 73 73 64.9 64.9 64.9 100 100
CONDENSER FAN / MOTORS
Power Supply V/3Ph/50Hz 380 - 400
Fan Type Axial
Quantity 4
Input watts per motor W 736
Maximum Current per motor A 2.2
Speed RPM RPM 1325
Windings Insulation class F
CONDENSER COIL
Total Face Area m² 1.69 1.69 1.69 1.69 1.69
Total Coils Quantity 8 4 4 8 4 4 8
Tube Diameter inch 3/8"
Type / Material Tubes-Fins Grooved / Copper Tubes – Corrugated Aluminum Fins
Number of rows 2 2 3 3 3 4 4
Number of circuit per one Double coil 4 4 6 6 6 8 8
(V)
Number of fins per inch 14 14 14 14 14 14 14
Width 2045
Depth 2705
Height 1675
MODEL DIMENSIONS (mm)
Height
with Feet 1800
TOTAL NET WEIGHT Kg 1352 1442 1532 1612 1692
REFRIGERANT PIPING LINES
Suction: Qty x Diameter 4 x 1-1/8” 4 x 1-1/8” 4 x 1-1/8” 4 x 1-3/8” 4 x 1-3/8”
Liquid: Qty x Diameter 4 x 5/8” 4 x 5/8” 4 x 5/8” 4 x 5/8” 4 x 5/8”

* Cooling capacity is based on 45°F saturated temperature and 95°F ambient temperature.
* 1 TR = 12000 Btu/hr 1Kw = 3412 Btu/hr

7
Technical Data
MODEL TSCU-60 TSCU-70 TSCU-75 TSCU-80 TSCU-90 TSCU-100

Power supply 4 pole 3 Phase / 50 Hz / 380v


BTU/Hr 790,500 884,000 930,750 1,054,000 1,147,500 1,241,000
KW 231.67 259.07 272.78 308.90 336 363.70
Nominal Cooling Capacity
TR 65.87 73.66 77.56 87.83 96 103.41
No of Gas Circuit 6 6 6 8 8 8
COMPRESSOR FOR MODULE
POWER SUPPLY V/3PH/50HZ 380 – 400
MINIMUM VOLTS - MAXIMUM VOLTS 340 – 440
TYPE Hermetic - Scroll
No Of COMPRESSOR / MODEL 6 2 4 6 8 4 4 8
ELECTRICAL DATA FOR ONE COMPRESSOR
Rated Load Amps ( RLA ) 20.5 20.5 24 24 20.5 20.5 24 24
Maximum Continuous Current ( MCC ) 35 35 34 34 35 35 34 34
Locked Rotor Amps ( LRA ) 140 140 174 174 140 140 174 174
Crankcase Heater Power Supply 230V / 1Ph / 50Hz
Crankcase Heater Type Belt Type
Crankcase Heater Quantity 6 2 4 6 8 4 4 8
Power Input per Compressor KW 11.45 11.45 13.6 13.6 11.45 11.45 13.6 13.6
MECHANICAL DATA
Swept Volume in³/rev 13.22 13.22 15.25 15.25 13.22 13.22 15.25 15.25
Displacement at 2900 RPM cfh 1331 1331 1536 1536 1331 1331 1536 1536
Maximum System Test Pressure Psi 363 / 595 363/595 363/595 363/595 363/595 363/595 363/595 363/595
Maximum Differential Pressure Psi 348 348 348 348 348 348 348 348
Suction Diameter inch 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8 1 - 3/8
Discharge Diameter inch 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8
Oil Equalization Connection 3/8” Flare SAE
Oil Type OM3 oil Mineral – 160 P OM3 oil Mineral – 160 P
Oil Quantity per Compressor Lit / OZ 3.38/114 3.38/114 3.38/114 3.38 / 114 3.38 / 114 3.38/114 3.38/114 3.38/114
Refrigerant charge Limit per kg 12.7 12.7 13.6 13.6 12.7 12.7 13.6 13.6
Compressor
Net Weight per compressor kg 64.9 64.9 100 100 64.9 64.9 100 100
CONDENSER FAN / MOTORS
Power Supply V/3Ph/50Hz 380 - 400
Fan Type Axial
Quantity 6 6 6 8 4 4 8
Input watts per motor W 736
Maximum Current per motor A 2.2
Speed RPM RPM 1325
Windings Insulation class F
CONDENSER COIL
Total Face Area m² 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69
Total Coils Quantity 12 4 8 12 16 8 8 16
Tube Diameter inch 3/8"
Type / Material Tubes-Fins Grooved / Copper Tubes – Corrugated Aluminum Fins
Number of rows 3 3 4 4 3 3 4 4
Number of circuit per one Double coil (V) 6 6 8 8 6 6 8 8
Number of fins per inch 14 14 14 14 14 14 14 14
Width 2045
Depth 3970 1434 2705 3970 5410 5410 5410
Height 1675
MODEL DIMENSIONS (mm)
Height
with Feet 1800

TOTAL NET WEIGHT Kg 2298 2458 2538 3064 3224 3384


REFRIGERANT PIPING LINES
Suction: Qty x Diameter 6 x 1-1/8” 6 x 1-3/8” 6x1-3/8” 8 x 1-1/8” 8 x 1-3/8” 8 x 1-3/8”
Liquid: Qty x Diameter 6 x 5/8” 6 x 5/8” 6 x 5/8” 8 x 5/8” 8 x 5/8” 8 x 5/8”

* Cooling capacity is based on 45°F saturated temperature and 95°F ambient temperature.
* 1 TR = 12000 Btu/hr 1Kw = 3412 Btu/hr

8
Cooling Performance Data

9
Cooling Performance Data

10
Cooling Performance Data

11
Cooling Performance Data

12
Cooling Performance Data

13
Cooling Performance Data

14
Dimensional Data
Condensing-TSCU One Module (7.5-10-12.5TR)
Note: All dimension by mm

Condensing-TSCU Two Module (15-20-25TR)

15
Dimensional Data
Condensing-TSCU Four Module (30-35-40-45-50TR)

Condensing-TSCU Six Module (60-70-75TR)

16
Dimensional Data
Condensing-TSCU Eight Module (80-90-100TR)

17
Electrical Data
ELECTRICAL DATA TSCU-7.5 to TSCU-25
MODEL TSCU-7.5 TSCU-10 TSCU-12.5 TSCU-15 TSCU-20 TSCU-25
Nominal Power Supply V/Ph/Hz 380-415/3/50
Nominal CoolingConsumption K 9.73 12.19 14.34 19.45 24.37 28.67
For CondensingUnit * W
Amps 17.8 22.3 28.3 35.6 44.6 56.6
No of Gas Circuit 1 1 1 2 2 2
Compressor
Power Supply V/3Ph/50H 380 - 400
QuantityOf COMPRESSOR z 1 1 1 2 2 2
Rated Load Amps ( RLA ) Amps. 19.2 25 30 19.2 25 30
Maximum ContinuousCurrent ( MCC ) Amps. 29 35 42 29 35 42
Locked Rotor Amps ( LRA ) Amps. 118 140 174 118 140 174
Input power / Compressor K 8.99 11.45 13.6 8.99 11.45 13.6
Input Current W
Amps. 16 20.5 26.5 16 20.5 26.5
Crankcase Heater Power W 90 90 90 90 90 90
CONDENSER FAN / MOTORS
Power Supply V/3Ph/50H 380 - 400
Quantity z 1 1 1 2 2 2
Input watts per motor W 736
Maximum Current per motor Amps. 2.2
Current input per Motor Amps. 1.8

ELECTRICAL DATA TSCU-30 to TSCU-50


MODEL TSCU-30 TSCU-35 TSCU-40 TSCU-45 TSCU-50
Nominal Power Supply V/Ph/Hz 380-415/3/50
Nominal Cooling Consumption KW 38.90 19.45 24.37 48.74 24.37 28.67 57.34
For Condensing Unit * Amps 71.2 35.6 44.6 89.2 44.6 56.6 113.2
No of Gas Circuit 4 4 4 4 4
Compressor
Power Supply V/3Ph/50Hz 380 - 400
Quantity Of COMPRESSOR 4 2 2 4 2 2 4
Rated Load Amps ( RLA ) Amps. 19.2 19.2 25 25 25 30 30
Maximum Continuous Current ( MCC ) Amps. 29 29 35 35 35 42 42
Locked Rotor Amps ( LRA ) Amps. 118 118 140 140 140 174 174
Input power / Compressor KW 8.99 8.99 11.45 11.45 11.45 13.6 13.6
Input Current Amps. 16 16 20.5 20.5 20.5 26.5 26.5
Crankcase Heater Power W 90 90 90 90 90 90 90
CONDENSER FAN / MOTORS
Power Supply V/3Ph/50Hz 380 - 400
Quantity 4 2 2 4 2 2 4
Input watts per motor W 736
Maximum Current per motor Amps. 2.2
Current input per Motor Amps. 1.8

ELECTRICAL DATA TSCU-60 to TSCU-100


MODEL TSCU-60 TSCU-70 TSCU-75 TSCU-80 TSCU-90 TSCU-100
Nominal Power Supply V/Ph/Hz 380-415/3/50
Nominal CoolingConsumption KW 73.12 24.37 57.34 86.02 97.49 47.27 57.34 114.69
For CondensingUnit * Amps 133.8 44.6 113.2 169.8 178.4 85.6 109.2 226.4
No of Gas Circuit 6 6 6 8 8 8
Compressor
Power Supply V/3Ph/50Hz 380 - 400
QuantityOf COMPRESSOR 6 2 4 6 8 4 4 8
Rated Load Amps ( RLA ) Amps. 25 25 30 30 25 25 30 30
Maximum ContinuousCurrent ( MCC ) Amps. 35 35 42 42 35 35 42 42
Locked Rotor Amps ( LRA ) Amps. 140 140 174 174 140 140 174 174
Input power / Compressor KW 11.45 11.45 13.6 13.6 11.45 11.45 13.6 13.6
Input Current Amps. 20.5 20.5 26.5 26.5 20.5 20.5 26.5 26.5
Crankcase Heater Power W 90 90 90 90 90 90 90 90
CONDENSER FAN / MOTORS
Power Supply V/3Ph/50Hz 380 - 400
Quantity 6 2 4 6 8 2 4 8
Input watts per motor W 736
Maximum Current per motor Amps. 2.2
Current input per Motor Amps. 1.8

Notes
*Nominal Cooling Consumption For Condensing Unit is depend on selection no of gas circuit , compressor Type and set of module for every unit

18
Wiring Diagram Unit Size 30, 40 & 50
Classic Control Wiring Diagram One Module (TSCU 7.5-10-12.5TR)

19
Wiring Diagram
Classic Control Wiring Diagram TSCU Two Module (15-20-25TR)

20
Wiring Diagram
Classic Control Wiring Diagram TSCU Four Module (30-35-40-45-50TR)

21
Wiring Diagram
Classic Control Wiring Diagram Six Module (TSCU 60-70-75TR)

22
Wiring Diagram
Wiring Diagrams For Programable Control Simens TSCU Units
Control Diagam One stage Programable Control Simens TSCU (7.5TR-10TR-12.5TR)

23
7112021

5, EL Nasr Road, Nasr City, Cairo, Egypt


Telephone: +202 240 22 866 - 240 22 844 - 240 25 444
240 44 772 - 240 44 997/8
Fax : +202 40 44 667/8
E-mail : [email protected]
Website:www.tibagroup.me
SECTION (4)
Reference list
‫شركة تى أم أى للتجارة والمقاوالت و األنشاءات‬

Projects Ref. List


No. Project Consultant Contractor Model Qty.
STP-120 1
STP-190 6
STP-250 4
STP-300 5
1 Upper Egypt SIEMENS
STS-250 1
STS-300 7
STS-150 1
STP-190 1
2 Carrefour Sky STS-120 1
STS-190 2
-‫مركز مؤتمرات األزھر‬
3 ‫الحمد للمقاوالت‬ STS-250 1
‫جامعه األزھر‬
STS-300 1
4 ‫الضبعه – مرسى مطروح‬ Total Air STS-250 4
5 ‫ اكتوبر‬6 ‫نادي الصيد‬ STS/O/250 1
6 ‫مصنع بيتى القطامية‬ STP-060 2
7 ‫مصنع بيتى المنصورة‬ Proservice STP-250 2
8 Bechtel building AMTEC STP-300 6
‫المبني االداري اللداره‬
9 ‫االسكندرية اللنشاءات‬ STS/O/250 6
‫المالية‬
STS-250 1
10 ‫مستشفى كوبرى القبه‬ Cool Way STS-300 2
STS-096 2
Hassan Allam STS/O/300 2
11 Bier Eireda
Technology TSCU-50 10
12 ‫مستشفي العاملين‬ Top Group STS/O/250 3
STS-120 1
13 On TV Pro Service
STS-300 2

3, EL Mamalik, Roksy, Heliopolis, Cairo, Egypt


TEL : 24022866-24022544-24025444-24044772-24044997/8 FAX : 24044771-24044667/8
Website:www.tmi-construction.com
‫شركة تى أم أى للتجارة والمقاوالت و األنشاءات‬

STS-250 3
SPINNEYS – New
14 ‫الوليد‬ STP-250 3
Minia Mall
– ‫متحف ومركب خوفو‬
15 ‫المھندس‬ STS-300 5
‫وزاره االثار‬
Amer Group Head
16 TMI STS-300 1
Quarter
Hassan Allam
17 ‫الجبل االصفر‬ STP-060 1
Construction
18 ‫مركز المعلومات القضائي‬ TMI STS-300 2
STS-190 3
19 ‫ مرسي مطروح‬-‫الضبعه‬ Total Air STS-250 7
STS-300 3
STS-190 2
20 MIV- MASJID AL-AMAAR ‫اعمار مصر‬
STS-150 1
STP-300 2
KME
21 ‫ جامعة النھضة‬- ‫كلية الطب‬ CREATIVE STP-120 3
ENGINEERING
STS/O/300 2
STS/O/120 1
STS/O/250 1
Ministry Of ‫الھندسية للتبريدوالتكييف‬
22 ‫مستشفى بنى حسن‬ STS/O/190 4
Health
STS/O/300 4
STP-150 1
23 TABA TABA STS-060 1
24 ‫مستشفى الجالء العسكرى‬ Top Group STS/O/190 4
STS/O/300 9
CARREFOUR -
25 PACER 2 WIRES STP-250 2
MADENATY
STP-190 1
STS/O/250 8
‫ادارة االشغال‬ ‫ادارة االشغال‬
26 ‫بانوراما حرب اكتوبر‬ STS-300 6
‫العسكرية‬ ‫العسكرية‬
STS-250 3
Masters For
27 CIP ROOM STS/O/250 1
Projects

3, EL Mamalik, Roksy, Heliopolis, Cairo, Egypt


TEL : 24022866-24022544-24025444-24044772-24044997/8 FAX : 24044771-24044667/8
Website:www.tmi-construction.com
‫شركة تى أم أى للتجارة والمقاوالت و األنشاءات‬

STP-150 4
‫ميلر‬RMC - ‫رافت‬
28 Tanta Mall Marakez STP-190 29
STP-250 32
Al Mansoura 2 zone Hassan Allam STP-150 2
29 SCG
3,4 Construction 12
‫مستشفي العاملين بالھاللاألحمر‬
30 Top Group STS/O/250 2
Ministry Of ‫ الھندسية للتبريدوالتكييف‬STS/O/120 1
31 ‫مستشفى الحلوه‬
Health STS/O/190 1
Pharmacy - 57357 STS/O/190 1
32 Capital
Hospital TSCU-50 1
‫جامعة‬- ‫الصيدلية االكلينيكية‬ ‫ايديال كونكريت‬
33 ‫جامعة االسكندرية‬ STS/O/060 1
‫االسكندرية‬ ‫للمقاوالت‬
PHARAOH 3 - TSCU-30 1
34 ELITE INTERPACK
PAPER LINE TSCU-50 1
CARREFOUR - ‫سوليتيك اللعمال‬
35 STS-250 3
BEVERLY HILLS ‫المتكاملة‬
‫ادارة االشغال‬ ‫ادارة االشغال‬ STS/O/250 2
36 110 ‫ الكيان‬- ‫فندق الضباط‬
‫العسكرية‬ ‫العسكرية‬ TSCU-30 9
STS/O/300 12
H-09 BUILDING - Hassan Allam STS/O/150 2
37 SCG
MANSOURA 2 Construction STS/O/190 2
STS/O/300 1
‫المعھد القومي للجھازالحركي‬ ‫معمار اللنشاء و‬
38 STS/O/190 1
‫و العصبي‬ ‫التعمير‬

‫مبني مصلحة الجوازات‬


39 ‫جي اس ايه جروب‬ STS/O/300 1
‫بالعباسية‬
STS/O/300 1
Dr.Mohamed TSCU-40 2
40 ‫ برنيس‬- ‫القاعدة البحرية‬ ‫قاصد خير‬
Abu Elfotoh TSCU-30 7
STP-190 2
Dr.Mohamed STS/O/300 1
41 ‫ جرجوب‬- ‫القاعدة البحرية‬ ‫الغرابلي‬
Abu Elfotoh TSCU-30 9
3, EL Mamalik, Roksy, Heliopolis, Cairo, Egypt
TEL : 24022866-24022544-24025444-24044772-24044997/8 FAX : 24044771-24044667/8
Website:www.tmi-construction.com
‫شركة تى أم أى للتجارة والمقاوالت و األنشاءات‬

‫ عبد الھادى‬/‫م‬ ‫ا لھندسية للتشييدوالبناء‬


42 METADED STS/O/300 2
‫منسى‬
STS/O/150 2
43 Wadi El Nile SCG LEEDS
STS/O/190 2
STS/O/096 1
ENGINEERING STS/O/150 1
44 SERVICE ECG ORASCOM STS/O/190 1
WAREHOUSE STS/O/250 1
TSCU-30 1
‫فان تك للتبريد والتكييف‬
45 ‫مستشفي مغربي‬ KEM STS/O/150 3

STS/O/250 1
‫المجموعة المتحدة‬
WELL CARE - TSCU-30 2
46 ‫للمقاوالت الكھروميكانيكية‬
ELMOHANDSEEN TSCU-40 1
TSCU-50 2
STS/O/120 1
‫المستشفي التعليمي كلية‬
STS/O/190 6
47 - ‫ جامعة االزھر‬- ‫الطب‬ ‫الحمد للمقاوالت‬
STS/O/250 13
‫أسيوط‬
STS/O/300 4
STP-300 1
48 Mansoura-3 ‫ على عمر‬/‫م‬ ‫المخابرات العامة‬
STP-250 8
SPINNEYS - TSCU-40 2
49 2WIRES
AMWAJ TSCU-50 1
6000 B FOOD
50 COURT - MASA ECG ORASCOM STS/O/250 1
ALAMIN
STS/O/250 1
TSCU-30 3
51 ‫مبني جھاز القاھرة الجديدة‬ ‫محسن محمد‬.‫د‬ ‫االسكندرية اللنشاءات‬
TSCU-40 15
TSCU-50 5
ENGINEERING
‫نيوماتكو للھندسة و‬ STP-096 1
52 SERVICE ECG
‫المقاوالت العامة‬ STP-300 1
WAREHOUSE -2
3, EL Mamalik, Roksy, Heliopolis, Cairo, Egypt
TEL : 24022866-24022544-24025444-24044772-24044997/8 FAX : 24044771-24044667/8
Website:www.tmi-construction.com
‫شركة تى أم أى للتجارة والمقاوالت و األنشاءات‬

STP-096 2
STP-120 1
STP-150 1
53 6000 B - 2 ECG ORASCOM
STS/O/120 1
STS/O/190 1
STS/O/250 1
‫مسجد المرحله العاشره‬
54 MCBS STS-300 1
‫بالرحاب‬
AL GALALA ‫الشروق للمقاوالت‬
55 ECG TSCU-30 1
RESTAURANT - 1 ‫العمومية و التوريدات‬
STS/O/250 1
TSCU-30 7
‫قاعدة شرق بورسعيد‬ Dr.Mohamed
56 ‫مافكو‬ TSCU-40 2
‫البحرية‬ Abu Elfotoh
STS-190 2
STS-300 1
TSCU- 30 10
‫إدارة االشغال‬
57 110 - ‫ الكيان‬60 ‫نادى‬ SABBOUR TSCU- 40 15
‫العسكرية‬
TSCU- 50 13
‫إدارة االشغال‬ TSCU- 40 9
58 110 - ‫ الكيان‬35 ‫نادى‬ SABBOUR
‫العسكرية‬ TSCU- 50 3
‫إدارة االشغال‬ TSCU- 40 9
59 110 - ‫ الكيان‬25 ‫نادى‬ SABBOUR
‫العسكرية‬ TSCU- 50 3
‫مستشفي قنا "مبني‬ ‫المؤسسه العالميه‬
60 STS/O/250 2
‫"القسطره‬ ‫العمال التكييف‬
- ‫فندق الماسه‬
61 6000 STP 190 1
‫العلمين‬
62 ‫مستشقى اورام مدينه نصر‬ HI AIR STS/O/300 1
Advanced STP-300 3
63 lessan hotel Technology STP-096 1
Services STP-120 1
STP-190 4
64 NBE SCG Korra
STS-150 2
El Serafy
65 2 ‫مطاعم المنصوره‬ TSCU-40 2
Engineering

3, EL Mamalik, Roksy, Heliopolis, Cairo, Egypt


TEL : 24022866-24022544-24025444-24044772-24044997/8 FAX : 24044771-24044667/8
Website:www.tmi-construction.com
‫شركة تى أم أى للتجارة والمقاوالت و األنشاءات‬

‫‪Engineering Service‬‬
‫‪66‬‬ ‫‪ECG‬‬ ‫‪ORASCOM‬‬ ‫‪TSCU-30‬‬ ‫‪1‬‬
‫‪Warehouse -3‬‬
‫‪STP-250‬‬ ‫‪1‬‬
‫‪67‬‬ ‫قاعدة برنيس البحرية‬ ‫قاصد خير‬
‫‪TSCU-30‬‬ ‫‪11‬‬
‫‪ENGINEERING‬‬
‫‪68‬‬ ‫‪SERVICE‬‬ ‫‪ECG‬‬ ‫‪ORASCOM‬‬ ‫‪TSCU-30‬‬ ‫‪1‬‬
‫‪WAREHOUSE -4‬‬
‫‪STS/O/300‬‬ ‫‪4‬‬
‫‪69‬‬ ‫المنصورة ‪3‬‬ ‫المخابرات العامة‬
‫‪TSCU-40‬‬ ‫‪2‬‬
‫الشروق للمقاوالت‬ ‫‪TSCU-30‬‬ ‫‪3‬‬
‫‪70‬‬ ‫‪El Galala Resorts‬‬ ‫‪ECG‬‬
‫العمومية و التوريدات‬ ‫‪STS/O/250‬‬ ‫‪1‬‬
‫‪71‬‬ ‫ھيئة االستشعار عن بعد‬ ‫‪SCG‬‬ ‫دار التبريد والتكييف‬ ‫‪STS/O/120‬‬ ‫‪2‬‬
‫‪STS/O/250‬‬ ‫‪1‬‬
‫‪72‬‬ ‫مستشفي المطرية التعليمي‬ ‫‪ORASCOM‬‬
‫‪STS/O/150‬‬ ‫‪1‬‬
‫‪STP-300‬‬ ‫‪2‬‬
‫‪73‬‬ ‫جامعة المستقبل‬ ‫جامعة المستقبل‬
‫‪STP-190‬‬ ‫‪2‬‬
‫‪Engineering Service‬‬
‫‪74‬‬ ‫‪ORASCOM‬‬ ‫‪STP-096‬‬ ‫‪1‬‬
‫‪Warehouse-5‬‬
‫‪STS-250‬‬ ‫‪2‬‬
‫‪75‬‬ ‫‪Marina Time Hotel‬‬ ‫‪Flash‬‬
‫‪STS-300‬‬ ‫‪6‬‬
‫جمعية الھالل االحمر‬
‫‪76‬‬ ‫احمد عالم للمقاوالت‬ ‫‪TSCU-7.5‬‬ ‫‪2‬‬
‫بالمنصورة‬

‫‪TSCU-30‬‬ ‫‪1‬‬
‫‪Hassan Allam‬‬
‫‪77‬‬ ‫‪Ramsis Post Office‬‬ ‫‪ECG‬‬ ‫‪TSCU-50‬‬ ‫‪1‬‬
‫‪Technology‬‬
‫‪TSCU-60‬‬ ‫‪2‬‬
‫دار الھندسة للتبريد‬
‫‪78‬‬ ‫مستشفي أورام االسماعيليه‬ ‫‪TSCU-30‬‬ ‫‪1‬‬
‫والتكييف‬
‫‪STS/O/190‬‬ ‫‪2‬‬
‫مبنى المطعم بمالعبالقطاع‬ ‫إدارة االشغال‬
‫‪79‬‬ ‫‪SABBOUR‬‬ ‫‪TSCU-40‬‬ ‫‪2‬‬
‫الثانى‬ ‫العسكرية‬
‫‪STS/O/300‬‬ ‫‪1‬‬
‫إدارة االشغال‬
‫‪80‬‬ ‫مبنى االشارة ‪ -‬الكيان ‪110‬‬ ‫‪SABBOUR‬‬ ‫‪TSCU-50‬‬ ‫‪4‬‬
‫العسكرية‬
‫‪81‬‬ ‫مبنى المطبعة ‪ -‬الكيان‬ ‫‪SABBOUR‬‬ ‫إدارة االشغال‬ ‫‪TSCU-40‬‬ ‫‪2‬‬
‫‪3, EL Mamalik, Roksy, Heliopolis, Cairo, Egypt‬‬
‫‪TEL : 24022866-24022544-24025444-24044772-24044997/8 FAX : 24044771-24044667/8‬‬
‫‪Website:www.tmi-construction.com‬‬

You might also like