KVM USER

MANUAL
- Standalone KVM

- KVM modules for LCD keyboard drawers

 Contents

Getting Started
Important Safeguards.................................................................................1
Regulatory Notice.......................................................................................2
Before Unpacking...............................................................................................................3
Unpacking...................................................................................................3
Installation.................................................................................................4

Part 1 Matrix Cat6 KVM

Connection & Cascade

1.1 MC0116 MC0216 MC0316 ..................5-10
1.2 MC1116 MC1216 MC2116 ................11-16
1.3 MC0132 MC0232 MC0332 ................17-22
1.4 MC1132 MC1232 MC2132 ................23-28
1.5 Dongle.....................................................................................................29
1.6 Specifications..........................................................................................30-33

Part 1 Matrix DB-15 KVM

Connection & Cascade

2.1 M018 M028 M038 .............. 34-39

2.2 M118 M128 M218 .............. 40-45

2.3 M0116 M0216 M0316 .............. 46-51

2.4 M1116 M1216 M2116 .............. 52-57

2.5 Specifications ..............................................................................58-61

Part 3 Matrix KVM Usage

3.1 KVM Button............................................................................................. 62
3.2 Password................................................................................................ 63
3.3 KVM OSD…............................................................................................ 64
3.4 KVM Hotkey............................................................................................ 65
3.5 IP Setting........................................................................................... 66-67
3.6 Optional Accessories.............................................................................. 68
3.7 DC power 12V, 24V, 48V input............................................................... 69
Part 4 Combo Cat6 KVM

Connection & Cascade

4.1 NVC800 NVC1600 NVC3200 ................70-74
4.2 NVCCE800 NVCCE1600 NVCCE3200 ................75-80
4.3 NVCIP800 NVCIP1600 NVCIP3200 ................81-85
4.4 Dongle.....................................................................................................86
4.5 Specifications..........................................................................................87-89

Part 5 Combo DB-15 KVM

Connection & Cascade

5.1 NVS801 NVS1601 .............. 90-94

5.2 NVCE800 NVCE1600 .............95-100

5.3 NVIP-802 NVIP-1602 ...........101-105

5.4 Specifications ............................................................................106-108

Part 6 Combo KVM Usage

6.1 KVM Button............................................................................................ 109
6.2 Password............................................................................................... 110
6.3 KVM OSD…........................................................................................... 111
6.4 KVM Hotkey........................................................................................... 112
6.5 IP Setting........................................................................................ 113-114
6.6 Optional Accessories............................................................................. 115
6.7 DC power 12V, 24V, 48V input.............................................................. 116
Part 7 PS/2 DB-15 KVM

Connection & Cascade

7.1 NV401A NV801A NV1601A ...........117-121
7.2 Specifications...............................................................................................122

Part 8 PS/2 KVM Usage

8.1 KVM Button............................................................................................ 123
8.2 Password............................................................................................... 124
8.3 KVM OSD…........................................................................................... 125
8.4 KVM Hotkey........................................................................................... 126
8.5 Optional Accessories............................................................................. 127
8.6 DC power 12V, 24V, 48V input.............................................................. 128

Part 9 FAQ and Troubleshooting..................................... 129-131

Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modified or removed.

■ Damage, deterioration or malfunction resulting from:

□ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.

□ Any damage of the product due to shipment.

□ Removal or installation of the product.

□ Causes external to the product, such as electric power fluctuation or failure.

□ Use of supplies or parts not meeting our specifications.

□ Normal wear and tear.

□ Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

P. 1
Regulatory Notice

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of
the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that
results from the use of this equipment.

Safety Instructions

■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned enviro-
nment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■ When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and
the power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.

■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equip-
ment and invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

■ Re-position or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

P. 2
Before Installation

■ It is very important to locate the KVM in a suitable environment.

■ The surface for placing and fixing the KVM should be stable and level or mounted into a suitable cabinet.

■ Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust,
dirt, heat, water, moisture and vibration.

■ Position LCD Keyboard Drawer with respect to related facilities.

Unpacking

The KVM comes with the standard parts shown in chapter 2 & 6. Check and make sure they are included
and in good condition. If anything is missing, or damage, contact the supplier immediately.

P. 3
Installation

■ Install each bracket using screws provided

shown in Figure 1.

Figure 1. Installing the bracket to the KVM.

■ Fix the KVM into the rack

* Hardware for fixing the mounting bracket to the

rack is not provided

Figure 2. Fixing the KVM into the rack.

P. 4
1.1 MC0116 / MC0216 / MC0316 Matrix Cat6 16 port KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 Receiver *Qty refer to the below table

6 User manual x 1 pc

7 12V Power adapter (for KVM) x 1 pc

8 Power cord x 1 pc

9 12V Power adapter (for receiver) *Qty refer to the below table

10 NE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table

Receiver 12V Power adapter NE-6 Combo 4-in-1 KVM cable

Model
Qty Qty Qty
MC0116 1 1 1
MC0216 2 2 2
MC0316 3 3 3
P. 5
1.1 MC0116 / MC0216 / MC0316 Matrix Cat6 16 port KVM

Connection

MC0116

MC0216

MC0316

P. 6
1.1 MC0116 / MC0216 / MC0316 Matrix Cat6 16 port KVM

P. 7
1.1 MC0116 / MC0216 / MC0316 Matrix Cat6 16 port KVM

Receiver

Receiver Connection

P. 8
1.1 MC0116 / MC0216 / MC0316 Matrix Cat6 16 port KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Matrix DB-15 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 9
1.1 MC0116 / MC0216 / MC0316 Matrix Cat6 16 port KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Matrix DB-15 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 10
1.2 MC1116 / MC1216 / MC2116 Matrix IP Cat6 16 port KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 Receiver *Qty refer to the below table

6 User manual x 2 pcs

7 12V Power adapter (for KVM) x 1 pc

8 Power cord x 1 pc

9 12V Power adapter (for receiver) *Qty refer to the below table

10 NE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table

Receiver 12V Power adapter NE-6 Combo 4-in-1 KVM cable

Model
Qty Qty Qty
MC1116 1 1 1
MC1216 2 2 2
MC2116 1 1 1

P. 11
1.2 MC1116 / MC1216 / MC2116 Matrix IP Cat6 16 port KVM

Connection

MC1116

MC1216

MC2116

P. 13
1.2 MC1116 / MC1216 / MC2116 Matrix IP Cat6 16 port KVM

P. 13
1.2 MC1116 / MC1216 / MC2116 Matrix IP Cat6 16 port KVM

Receiver

Receiver Connection

P. 14
1.2 MC1116 / MC1216 / MC2116 Matrix IP Cat6 16 port KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Matrix DB-15 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 15
1.2 MC1116 / MC1216 / MC2116 Matrix IP Cat6 16 port KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Matrix DB-15 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 16
1.3 MC0132 / MC0232 / MC0332 Matrix Cat6 32 port KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 Receiver *Qty refer to the below table

6 User manual x 1 pc

7 12V Power adapter (for KVM) x 1 pc

8 Power cord x 1 pc

9 12V Power adapter (for receiver) *Qty refer to the below table

10 NE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table

Receiver 12V Power adapter NE-6 Combo 4-in-1 KVM cable

Model
Qty Qty Qty
MC0132 1 1 1
MC0232 2 2 2
MC0332 3 3 3

P. 17
1.3 MC0132 / MC0232 / MC0332 Matrix Cat6 32 port KVM

Connection

MC0132

MC0232

MC0332

P. 18
1.3 MC0132 / MC0232 / MC0332 Matrix Cat6 32 port KVM

P. 19
1.3 MC0132 / MC0232 / MC0332 Matrix Cat6 32 port KVM

Receiver

Receiver Connection

P. 20
1.3 MC0132 / MC0232 / MC0332 Matrix Cat6 32 port KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Matrix DB-15 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 21
1.3 MC0132 / MC0232 / MC0332 Matrix Cat6 32 port KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Matrix DB-15 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 22
1.4 MC1132 / MC1232 / MC2132 Matrix IP Cat6 32 port KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 Receiver *Qty refer to the below table

6 User manual x 2 pcs

7 12V Power adapter (for KVM) x 1 pc

8 Power cord x 1 pc

9 12V Power adapter (for receiver) *Qty refer to the below table

10 NE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table

Receiver 12V Power adapter NE-6 Combo 4-in-1 KVM cable

Model
Qty Qty Qty
MC1132 1 1 1
MC1232 2 2 2
MC2132 1 1 1

P. 23
1.4 MC1132 / MC1232 / MC2132 Matrix IP Cat6 32 port KVM

Connection

MC1132

MC1232

MC2132

P. 24
1.4 MC1132 / MC1232 / MC2132 Matrix IP Cat6 32 port KVM

P. 25
1.4 MC1132 / MC1232 / MC2132 Matrix IP Cat6 32 port KVM

Receiver

Receiver Connection

P. 26
1.4 MC1132 / MC1232 / MC2132 Matrix IP Cat6 32 port KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Matrix DB-15 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 27
1.4 MC1132 / MC1232 / MC2132 Matrix IP Cat6 32 port KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Matrix DB-15 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 28
1.5 IF_DDVI / IF_DUSB / IF_DPS2 Dongle Connections

IF_DDVI DVI-USB dongle

■ To connect DVI-D connector to the computer’s video card
■ To connect USB connector to the computer’s USB port

IF_DUSB VGA-USB dongle

■ To connect DB-15 connector to the computer’s video card
■ To connect USB connector to the computer’s USB port

IF_DPS2 VGA-PS/2 dongle

■ To connect DB-15 connector to the computer’s video card
■ To connect keyboard connector to the computer’s keyboard port
■ To connect mouse connector to the computer’s mouse port

P. 29
1.6 Specification Matrix Cat6 16 port KVM

MC0116 / MC0216 / MC0316

▀ KVM Port

Number of ports: 16

Connector: RJ-45

Connectivity: DVI-D / VGA connector dongle up to 40 meters (132 feet) Cat6 / Cat5 cable

▀ Local Console

Monitor port:: HDDB15-pin VGA, up to 1600 x 1200

Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

▀ Cat6 Remote Console

Number of remote port: 1/2/3

Monitor port: DB15-pin VGA, up to 1600 x 1200

Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet

▀ Expansion: Up to 128 servers by 8-level cascade

▀ Compatibility

Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server

Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power

Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord

Option DC: 12V / 24V / 48V DC input

Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental

Operating: 0 to 50°C

Storage: -5 to 60°C

Relative humidity: 90%, non-condensing

Shock: 50G peak acceleration (11ms, half-sine wave)

Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information

Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch

Net weight: 4 kg / 9 lb

▀ Packing Information

Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch

Gross weight: 7 kg / 15 lb

P. 30
1.6 Specification Matrix IP Cat6 16 port KVM

MC1116 / MC1216 / MC2116

▀ KVM Port
Number of ports: 16
Connector: RJ-45
Connectivity: DVI-D / VGA connector dongle up to 40 meters (132 feet) Cat6 / Cat5 cable

▀ Local Console
Monitor port:: HDDB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

▀ Cat6 Remote Console

Number of remote port: 1/2/1
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀ IP Remote Console
Number of IP console: 1/1/2
User management: 15-user login, 1 x active user
Browser: Internet Explorer, Firefox, Safari
Security: SSL v3, RSA, AES, HTTP / HTTPs, CSR
IP Access: 1 x RJ45 Ethernet, 1 x DB-9 serial & 1 x USB port
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀ Expansion: Up to 128 servers by 8-level cascade
▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀ Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb
▀ Packing Information

Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch

Gross weight: 7 kg / 15 lb P. 31
1.6 Specification Matrix Cat6 32 port KVM

MC0132 / MC0232 / MC0332

▀ KVM Port
Number of ports: 32
Connector: RJ-45
Connectivity: DVI-D / VGA connector dongle up to 40 meters (132 feet) Cat6 / Cat5 cable

▀ Local Console
Monitor port:: HDDB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

▀ Cat6 Remote Console

Number of remote port: 1/2/3
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet

▀ Expansion: Up to 256 servers by 8-level cascade

▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb

▀ Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb

P. 32
1.6 Specification Matrix IP Cat6 32 port KVM

MC1132 / MC1232 / MC2132

▀ KVM Port
Number of ports: 32
Connector: RJ-45
Connectivity: DVI-D / VGA connector dongle up to 40 meters (132 feet) Cat6 / Cat5 cable

▀ Local Console
Monitor port:: HDDB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

▀ Cat6 Remote Console

Number of remote port: 1/2/1
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀ IP Remote Console
Number of IP console: 1/1/2
User management: 15-user login, 1 x active user
Browser: Internet Explorer, Firefox, Safari
Security: SSL v3, RSA, AES, HTTP / HTTPs, CSR
IP Access: 1 x RJ45 Ethernet, 1 x DB-9 serial & 1 x USB port
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀ Expansion: Up to 256 servers by 8-level cascade
▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀ Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb
▀ Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb
P. 33
2.1 M018 / M028 / M038 Matrix DB-15 8 port KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 Receiver *Qty refer to the below table

6 User manual x 1 pc

7 12V Power adapter (for KVM) x 1 pc

8 Power cord x 1 pc

9 12V Power adapter (for receiver) *Qty refer to the below table

10 NE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table

Receiver 12V Power adapter NE-6 Combo 4-in-1 KVM cable

Model
Qty Qty Qty
M018 1 1 1
M028 2 2 2
M038 3 3 3

P. 34
2.1 M018 / M028 / M038 Matrix DB-15 8 port KVM

Connection

M018

M028

M038

P. 35
2.1 M018 / M028 / M038 Matrix DB-15 8 port KVM

P. 36
2.1 M018 / M028 / M038 Matrix DB-15 8 port KVM

Receiver

Receiver Connection

P. 37
2.1 M018 / M028 / M038 Matrix DB-15 8 port KVM

Cascade
■ Cascade up to 8 levels, 64 servers
■ Interconnection with Matrix Cat6 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 38
2.1 M018 / M028 / M038 Matrix DB-15 8 port KVM

Cascade
■ Cascade up to 8 levels, 64 servers
■ Interconnection with Matrix Cat6 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 39
2.2 M118 / M128 / M218 Matrix IP DB-15 8 port KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 Receiver *Qty refer to the below table

6 User manual x 2 pcs

7 12V Power adapter (for KVM) x 1 pc

8 Power cord x 1 pc

9 12V Power adapter (for receiver) *Qty refer to the below table

10 NE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table

Receiver 12V Power adapter NE-6 Combo 4-in-1 KVM cable

Model
Qty Qty Qty
M118 1 1 1
M128 2 2 2
M218 1 1 1

P. 40
2.2 M118 / M128 / M218 Matrix IP DB-15 8 port KVM

Connection

M118

M128

M218

P. 41
2.2 M118 / M128 / M218 Matrix IP DB-15 8 port KVM

P. 42
2.2 M118 / M128 / M218 Matrix IP DB-15 8 port KVM

Receiver

Receiver Connection

P. 43
2.2 M118 / M128 / M218 Matrix IP DB-15 8 port KVM

Cascade
■ Cascade up to 8 levels, 64 servers
■ Interconnection with Matrix Cat6 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 44
2.2 M118 / M128 / M218 Matrix IP DB-15 8 port KVM

Cascade
■ Cascade up to 8 levels, 64 servers
■ Interconnection with Matrix Cat6 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 45
2.3 M0116 / M0216 / M0316 Matrix DB-15 16 port KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 Receiver *Qty refer to the below table

6 User manual x 1 pc

7 12V Power adapter (for KVM) x 1 pc

8 Power cord x 1 pc

9 12V Power adapter (for receiver) *Qty refer to the below table

10 NE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table

Receiver 12V Power adapter NE-6 Combo 4-in-1 KVM cable

Model
Qty Qty Qty
M0116 1 1 1
M0216 2 2 2
M0316 3 3 3

P. 46
2.3 M0116 / M0216 / M0316 Matrix DB-15 16 port KVM

Connection

M0116

M0216

M0316

P. 47
2.3 M0116 / M0216 / M0316 Matrix DB-15 16 port KVM

P. 48
2.3 M0116 / M0216 / M0316 Matrix DB-15 16 port KVM

Receiver

Receiver Connection

P. 49
2.3 M0116 / M0216 / M0316 Matrix DB-15 16 port KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Matrix Cat6 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 50
2.3 M0116 / M0216 / M0316 Matrix DB-15 16 port KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Matrix Cat6 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 51
2.4 M1116 / M1216 / M2116 Matrix IP DB-15 16 port KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 Receiver *Qty refer to the below table

6 User manual x 2 pcs

7 12V Power adapter (for KVM) x 1 pc

8 Power cord x 1 pc

9 12V Power adapter (for receiver) *Qty refer to the below table

10 NE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table

Receiver 12V Power adapter NE-6 Combo 4-in-1 KVM cable

Model
Qty Qty Qty
M1116 1 1 1
M1216 2 2 2
M2116 1 1 1

P. 52
2.4 M1116 / M1216 / M2116 Matrix IP DB-15 16 port KVM

Connection

M1116

M1216

M2116

P. 53
2.4 M1116 / M1216 / M2116 Matrix IP DB-15 16 port KVM

P. 54
2.4 M1116 / M1216 / M2116 Matrix IP DB-15 16 port KVM

Receiver

Receiver Connection

P. 55
2.4 M1116 / M1216 / M2116 Matrix IP DB-15 16 port KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Matrix Cat6 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 56
2.4 M1116 / M1216 / M2116 Matrix IP DB-15 16 port KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Matrix Cat6 KVM
■ Cascading multiple KVM by CMC-3 cable.

P. 57
2.5 Specifications Matrix DB-15 8 port KVM

M018 / M028 / M038

▀ KVM Port
Number of ports: 8
Connector: 8 x DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable up to 6, 10 & 15 feet

▀ Local Console
Monitor port:: 1 x DB-15 VGA (up to 1600 x 1200)
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

▀ Cat6 Remote Console

Number of remote port: 1/2/3
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet

▀ Expansion: Up to 64 servers by 8-level cascade

▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb

▀ Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb

P. 58
2.5 Specifications Matrix IP DB-15 8 port KVM

M118 / M128 / M218

▀ KVM Port
Number of ports: 8
Connector: 8 x DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable up to 6, 10 & 15 feet

▀ Local Console
Monitor port:: 1 x DB-15 VGA (up to 1600 x 1200)

Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

▀ Cat6 Remote Console

Number of remote port: 1/2/1
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀ IP Remote Console
Number of IP console: 1/1/2
User management: 15-user login, 1 x active user
Browser: Internet Explorer, Firefox, Safari
Security: SSL v3, RSA, AES, HTTP / HTTPs, CSR
IP Access: 1 x RJ45 Ethernet, 1 x DB-9 serial & 1 x USB port
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀ Expansion: Up to 64 servers by 8-level cascade
▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀ Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb
▀ Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb
P. 59
2.5 Specifications Matrix DB-15 16 port KVM

M0116 / M0216 / M0316

▀ KVM Port
Number of ports: 16
Connector: 16 x DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable up to 6, 10 & 15 feet

▀ Local Console
Monitor port:: 1 x DB-15 VGA (up to 1600 x 1200)
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

▀ Cat6 Remote Console

Number of remote port: 1/2/3
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet

▀ Expansion: Up to 128 servers by 8-level cascade

▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb

▀ Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb

P. 60
2.5 Specifications Matrix IP DB-15 16 port KVM

M1116 / M1216 / M2116

▀ KVM Port
Number of ports: 16
Connector: 16 x DB-15 combo connector
Connectivity: DVI-D / VGA connector dongle up to 40 meters (132 feet) Cat6 / Cat5 cable

▀ Local Console
Monitor port:: 1 x DB-15 VGA (up to 1600 x 1200)
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse

▀ Cat6 Remote Console

Number of remote port: 1/2/1
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀ IP Remote Console
Number of IP console: 1/1/2
User management: 15-user login, 1 x active user
Browser: Internet Explorer, Firefox, Safari
Security: SSL v3, RSA, AES, HTTP / HTTPs, CSR
IP Access: 1 x RJ45 Ethernet, 1 x DB-9 serial & 1 x USB port
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀ Expansion: Up to 128 servers by 8-level cascade
▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀ Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb
▀ Packing Information

Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch

Gross weight: 7 kg / 15 lb
P. 61
3.1 KVM Button Matrix KVM Usage

Power ON
■ Turn off all servers and KVM switches
■ Make sure all cables / connectors are properly connected
■ Recommend Power ON sequence is monitor, KVM switch finally computer

Front Panel - Port LED Indications

8 ports

16 ports

32 ports

Bank no. 7-Segment BANK LED indication

PC port LEDs Power : Blue LED on indicating a PC is connecting to the port

Access : Green LED on indicating a selected channel

Remote : Red LED on indicating the port is selecting by a remote console

Channel button Press to select channel from 01 to 32

Bank button Select the bank from 1 to 8

P. 62
3.2 Password Matrix KVM Usage

The password is disabled by default ( i.e. There is no password required when you power on the KVM switch for the first time)
■ Enable password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P
3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field
(Do not use “0” on number pad)
4. In USER level, press Space bar + Enter in user name & password field
Remark: Automatic logout after 10 minutes of inactivity

■ Set your own user name & password

1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name & password
field
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Set password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password
b. In the row 1 to 8 (USER), press Enter to set your own user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character

■ Change your password

1. Login the KVM in SUPERVISOR level by pressing your own user name & password
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Change password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password
b. In the row 1 to 8 (USER), press Enter to change your user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character

■ Disable your password

1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P
3. You don’t need user name & password to access the KVM OSD menu

■ Forget your password

Please contact your supplier for further support

Remark:
■ You must press the KVM hotkey within 2 seconds

■ A beep sound will be heard for successful entering KVM hotkey

P. 63
3.3 KVM OSD Matrix KVM Usage
OSD Menu

OSD operation

next to the system name The PC is powered on

next to the system name The PC is selected

F1 Access F1 MAIN MENU

F2 Logout the OSD menu

F3 Previous menu

Esc Cancel / Quit

Enter Complete / Switch to selected port

Switch to previous or next port

PgUp/PgDn Switch to previous bank or next bank

Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32
1/2/3/4 Remark: Display port 17 ~ 32 for 32 port model only

F1 Main Menu

01 LANGUAGE OSD language change

02 PORT NAME EDIT Define port name

03 PORT SEARCH Quick searching by port name

04 USER SECURITY Change password

05 ACCESS LIST Define user access authority

06 HOTKEY Change hotkey

07 TIME SETTINGS Modify scan display time interval

08 OSD MOUSE Modify OSD mouse speed

P. 64
3.4 KVM Hotkey Matrix KVM Usage
Local Console Hotkey
Hotkey Function

Scroll Lock + Scroll Lock + Space Bar Calling OSD menu

Right-button mouse + Esc Calling OSD menu

Scroll Lock + Scroll Lock + Switch to previous port

Scroll Lock + Scroll Lock + Switch to next port

Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank

Scroll Lock + Scroll Lock + Bank no. + Port no. Switch to specific port

Turn the buzzer ON and OFF

Scroll Lock + Scroll Lock + B
* Default the buzzer is ON

Logout the KVM if password security is ON. Show up the status

Scroll Lock + Scroll Lock + P
windows

Advance hotkeys (for Supervisor login only)

Activate auto-scan mode for connected servers
Scroll Lock + Scroll Lock + S
*Press any key to exit the auto-scan mode

Reset all the KVM settings to factory default

Scroll Lock + Scroll Lock + R
*Except User Security settings

Disable and enable password security

Scroll Lock + Scroll Lock + U
*Default security is OFF

To enable / disable the screen saving function and 10 minutes auto-

Scroll Lock + Scroll Lock + L logout
*Default the screen saving is OFF

Remarks:
■ Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.”

- Bank No. : 1 to 8

- Port No. : 01 to 16

- e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0 + 4

- e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6

■ You must press the hotkey within 2 seconds

■ A beep sound will be heard for successful entering

■ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp, PgDn, and Enter keys
are supports
Remote Console Hotkey
Hotkey Function
Scoll Lock + Scoll Lock + F1 Show up the Help OSD windows

Select Hotkey
Scoll Lock + Scoll s Lock + F2
*Default is Caps Lock

Scoll Lock + Scoll Lock + C Toggle switch between remote & local port

Scoll Lock + Scoll Lock + Q Turn the buzzer ON & OFF

*Default the buzzer is ON

Scoll Lock + Scoll Lock + S Activate auto-scan mode for remote & local port
*The scan time interval is 5 seconds

Scoll Lock + Scoll Lock + A Auto-adjust the video signal

P. 65
3.5 IP Setting Matrix KVM Usage

Quick Installation Guide of IP KVM for remote access

Please perform the follow steps
1. Power off all KVM hardware and connected devices.
2. Connect the power supply to IP KVM
3. Connect the monitor, keyboard & mouse to console port of IP KVM (not applicable to integrated LCD drawer version)
4. Connect the KVM cable to IP KVM and target servers
5. Use an Ethernet cable to connect your local area network (LAN) to the IP console port on the KVM

Initial IP configuration
The factory default, DHCP mode is disable (IP auto configuration = None), and the preset default address as below :
IP address : 192.168.1.22 (default)
Subnet-mask : 255.255.255.0
Default Gateway: None

Install the “PSetup.exe” program from the provided CD-disc to a computer which networked with IP KVM switch, then press
Refresh Devices the look for the IP-KVM.
a. Select the MAC address from label on the bottom of the IP-KVM switch
b. Click Query Device

1. Configure the IP KVM with fixed address

a. Setup “IP auto configuration” as “None”; setup IP address and Subnet mask
b. Enter Super user login and password for Authentication (default : super/pass)
c. Setup Device. If super login was authenticated, it’ll show “Successfully configured device”.
Otherwise it’ll show “Permission Denied”.

2. Configure the IP KVM with DHCP

a. Setup “IP auto configuration” as “DHCP”
b. Enter Super user login and password for Authentication (default : super/pass)
c. Setup Device. If super login was authenticated, it’ll show “Successfully configured device”.
Otherwise it’ll show “Permission Denied”.

3. Install JVM on Client system

The IP-KVM switch was remote accessed by a standard JAVA enabled web browser. The client system
must install Sun JVM 1.4.2 or above for remote access the IP KVM.

Remark:
■ At a minimum, you must have Internet Explorer 6.0 or Netscape 7.0 or Molliza 1.6 (and above) installed on
your client computer.

P. 66
3.5 IP Setting Matrix KVM Usage

4. Remote access the IP-KVM switch via Web

Using the HTTP protocol or a secure encrypted connection via HTTPS and entering the configured IP address of IP KVM
switch into the web browser to remote access the IP KVM switch.

With successful connection to IP KVM, the login page will show as below, then key in the default user name & password

5. After successful login to IP KVM, you will enter the main page of IP KVM as below :

Remark:
■ We strongly recommend the user changes the default username and password to user specific values

■ Please refer to the “IP KVM User Manual” for more detailed information about IP KVM switch.

6. Bandwidth

P. 69
3.6 Optional Accessories Matrix KVM Usage

1. Combo 4-in-1 KVM cable

1.1 NE-6 6 feet
1.2 NE-10 10 feet
1.3 NE-15 15 feet

2. Matrix KVM cascade cable

2.1 CMC-3 3 feet

3. Cat5 cable
3.1 NU-3 3 feet
3.2 NU-6 6 feet
3.3 NU-10 10 feet
3.4 NU-15 15 feet
3.5 NU-33 33 feet
3.6 NU-66 66 feet

4. Cat6 / USB KVM cascade cable

4.1 CBC-6 6 feet

5. DVI-USB Dongle
5.1 IF_DDVI DVI-D

6. VGA-USB Dongle
6.1 IF_DUSB USB

7. VGA-PS/2 Dongle
7.1 IF_DPS2 PS/2

8. Power Cord
8.1 IEC power cord
8.2 NEMA 5-15 power cord (US)
8.3 BS 1363 power cord (UK)
8.4 CEE 7/4 power cord (German)
8.5 AS 3112 power cord (Australia)

P. 69
3.7 DC Power 12V, 24V, 48V Input Matrix KVM Usage

Model 12V 24V 48V

Input rating

Input voltage: 12-Volt 24-Volt 48-Volt

Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V

Input current

- No load 50 mA 50 mA 50 mA

- Full load 4950 mA 2450 mA 1220 mA

Output rating

Output voltage: 12-Volt 12-Volt 12-Volt

Output current: 4.16A 4.16A 4.16A

Efficiency 84% 85% 85%

Remarks:
■ Package does not include power cord

P. 69
4.1 NVC800 / NVC1600 / NVC3200 Combo Cat6 KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 User manual x 1 p

6 Power cord x 1 pc

P. 70
4.1 NVC800 / NVC1600 / NVC3200 Combo Cat6 KVM

Connection

NVC800

NVC1600

NVC3200

P. 71
4.1 NVC800 / NVC1600 / NVC3200 Combo Cat6 KVM

P. 72
4.1 NVC800 / NVC1600 / NVC3200 Combo Cat6 KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Combo DB-15 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 73
4.1 NVC800 / NVC1600 / NVC3200 Combo Cat6 KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Combo DB-15 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 74
4.2 NVCCE800 / NVCCE1600 / NVCCE3200 Combo Cat6 Two Console KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 User manual x 1 pc

6 Power cord x 1 pc

7 Receiver x 1 pc

8 12V Power adapter (for receiver) x 1 pc

9 NE-6 Combo 4-in-1 KVM cable (for receiver) x 1 pc

P. 75
4.2 NVCCE800 / NVCCE1600 / NVCCE3200 Combo Cat6 Two Console KVM

Connection

NVCCE800

NVCCE1600

NVCCE3200

P. 76
4.2 NVCCE800 / NVCCE1600 / NVCCE3200 Combo Cat6 Two Console KVM

P. 77
4.2 NVCCE800 / NVCCE1600 / NVCCE3200 Combo Cat6 Two Console KVM

Receiver

Receiver Connection

P. 78
4.2 NVCCE800 / NVCCE1600 / NVCCE3200 Combo Cat6 Two Console KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Combo DB-15 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 79
4.2 NVCCE800 / NVCCE1600 / NVCCE3200 Combo Cat6 Two Console KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Combo DB-15 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 80
4.3 NVCIP800 / NVCIP1600 / NVCIP3200 Combo Cat6 IP KVM

Package Content (only for rackmount KVM)

○
1 KVM switch x 1 pc

○
2 Screw M3.2 x 4.5mm x 4 pcs

○
3 Screw M4 x 10mm x 8 pcs

○
4 Bracket x 1 set

○
5 User manual x 2 pcs

○
6 Power cord x 1 pc

P. 81
4.3 NVCIP800 / NVCIP1600 / NVCIP3200 Combo Cat6 IP KVM

Connection

NVCIP800

NVCIP1600

NVCIP3200

P. 82
4.3 NVCIP800 / NVCIP1600 / NVCIP3200 Combo Cat6 IP KVM

P. 83
4.3 NVCIP800 / NVCIP1600 / NVCIP3200 Combo Cat6 IP KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Combo DB-15 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 84
4.3 NVCIP800 / NVCIP1600 / NVCIP3200 Combo Cat6 IP KVM

Cascade
■ Cascade up to 8 levels, 256 servers
■ Interconnection with Combo DB-15 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 85
4.4 IF_DDVI / IF_DUSB / IF_DPS2 Dongle Connections

IF_DDVI DVI-USB dongle

■ To connect DVI-D connector to the computer’s video card
■ To connect USB connector to the computer’s USB port

IF_DUSB VGA-USB dongle

■ To connect DB-15 connector to the computer’s video card
■ To connect USB connector to the computer’s USB port

IF_DPS2 VGA-PS/2 dongle

■ To connect DB-15 connector to the computer’s video card
■ To connect keyboard connector to the computer’s keyboard port
■ To connect mouse connector to the computer’s mouse port

P. 86
4.5 Specifications Combo Cat6 KVM

NVC800 / NVC1600 / NVC3200

▀ KVM Port
Number of ports: 8, 16 or 32

Connector: RJ-45

Connectivity: DVI-D / VGA connector dongle up to 40 meters (132 feet) Cat6 / Cat5 cable

▀ Local Console
Graphic connector: 1 x DB-15 VGA

Resolution: Up to 1600 x 1200

Input device: 2 x USB type A for keyboard & mouse

▀ Management

Multilingual OSD: English, France, German, Spanish, Italian, Russian, Simplified Chinese,
Japanese

Hotkey combination: Scroll-lock, Cap-lock, Num-lock, Alt, Ctrl & Win

Security: Password enable & disable, up to 8 users profile for port access

PC Selection: Front button, OSD menu & hotkey

▀ Expansion: Up to 256 servers by 8-level cascade

▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server

Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power

Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord OR

AC / DC power adapter [email protected] (optional)

Option DC: 12V / 24V / 48V DC input

Consumption: Max. 48 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C

Storage: -5 to 60°C

Relative humidity: 90%, non-condensing

Shock: 50G peak acceleration (11ms, half-sine wave)

Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information
Dimension (W x D x H): 446 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch

Net weight: 4 kg / 9 lb

▀ Packing Information

Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch

Gross weight: 7 kg / 15 lb

P. 87
4.5 Specifications Combo Cat6 Two Console KVM

NVCCE800 / NVCCE1600 / NVCCE3200

▀ KVM Port
Number of ports: 8, 16 or 32

Connector: RJ-45

Connectivity: DVI-D / VGA connector dongle up to 40 meters (132 feet) Cat6 / Cat5 cable

▀ Local Console
Graphic connector: 1 x DB-15 VGA

Resolution: Up to 1600 x 1200

Input device: 2 x USB type A for keyboard & mouse

▀ Remote Console

Connector: HDDB 15-pin, VGA

Resolution: Up to 1600 x 1200 (500 feet), Up to 1024 x 768 (1000 feet)

Input device: 2 x USB type A for keyboard & mouse

Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1000 feet

Compensation: Auto adjust for cable length

▀ Expansion: Up to 256 servers by 8-level cascade

▀ Compatibility

Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server

Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix, DOS

▀ Power

Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord OR

AC / DC power adapter [email protected] (optional)
Option DC: 12V / 24V / 48V DC input

Consumption: Max. 48 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C

Storage: -5 to 60°C

Relative humidity: 90%, non-condensing

Shock: 50G peak acceleration (11ms, half-sine wave)

Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information

Dimension (W x D x H): 446 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch

Net weight: 4 kg / 9 lb

▀ Packing Information

Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch

Gross weight: 7 kg / 15 lb

P. 88
4.5 Specifications Combo Cat6 IP KVM

NVCIP800 / NVCIP1600 / NVCIP3200

▀ KVM Port
Number of ports: 8, 16 or 32
Connector: RJ-45
Connectivity: DVI-D / VGA connector dongle up to 40 meters (132 feet) Cat6 / Cat5 cable

▀ Local Console
Graphic connector: 1 x DB-15 VGA
Resolution: Up to 1600 x 1200
Input device: 2 x USB type A for keyboard & mouse

▀ IP Remote Console
Connector: RJ45 Ethernet
User management: 15-user login, 1 x active user
Network protocol: DHCP / BOOTP / DNS
Security: SSL v3, RSA, AES, HTTP / HTTPs, CSR
Resolution: Up to 1600 x 1200
Browser: IE, Firefox, Safari, Netscape
Others: Serial port, virtual media via USB

▀ Expansion: Up to 256 servers by 8-level cascade

▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord OR
AC / DC power adapter [email protected] (optional)
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 48 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information
Dimension (W x D x H): 446 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb

▀ Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb

P. 89
5.1 NVS801 / NVS1601 Combo DB-15 KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 User manual x 1 pc

6 Power cord x 1 pc

P. 90
5.1 NVS801 / NVS1601 Combo DB-15 KVM

Connection

NVS801

NVS1601

P. 91
5.1 NVS801 / NVS1601 Combo DB-15 KVM

P. 92
5.1 NVS801 / NVS1601 Combo DB-15 KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Combo Cat6 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 93
5.1 NVS801 / NVS1601 Combo DB-15 KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Combo Cat6 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 94
5.2 NVCE800 / NVCE1600 Combo DB-15 Two Console KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 User manual x 1 pc

6 12V Power adapter x 2 pcs

7 Receiver x 1 pc

8 NE-6 Combo 4-in-1 KVM cable (for receiver) x 1 pc

P. 95
5.2 NVCE800 / NVCE1600 Combo DB-15 Two Console KVM

Connection

NVCE800

NVCE1600

P. 96
5.2 NVCE800 / NVCE1600 Combo DB-15 Two Console KVM

P. 97
5.2 NVCE800 / NVCE1600 Combo DB-15 Two Console KVM

Receiver

Receiver Connection

P. 98
5.2 NVCE800 / NVCE1600 Combo DB-15 Two Console KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Combo Cat6 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 99
5.2 NVCE800 / NVCE1600 Combo DB-15 Two Console KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Combo Cat6 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 100
5.3 NVIP-802 / NVIP-1602 Combo DB-15 IP KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 User manual x 2 pcs

6 12V Power adapter x 1 pc

P. 101
5.3 NVIP-802 / NVIP-1602 Combo DB-15 IP KVM

Connection

NVIP-802

NVIP-1602

P. 102
5.3 NVIP-802 / NVIP-1602 Combo DB-15 IP KVM

P. 103
5.3 NVIP-802 / NVIP-1602 Combo DB-15 IP KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Combo Cat6 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 104
5.3 NVIP-802 / NVIP-1602 Combo DB-15 IP KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Interconnection with Combo Cat6 KVM
■ Cascading multiple KVM by CBC-6 cable.

P. 105
5.4 Specifications Combo DB-15 KVM

NVS801 / NVS1601
▀ KVM Port
Number of ports: 8 or 16

Connector: DB-15 combo connector

Connectivity: Combo 4-in-1 KVM cable, up to 6, 10 & 15 feet

▀ Local Console
Graphic connector: 1 x DB-15 VGA

Resolution: Up to 1600 x 1200

Input device: 2 x USB type A for keyboard & mouse

▀ Management

Multilingual OSD: English, France, German, Spanish, Italian, Russian, Simplified Chinese,
Japanese

Hotkey combination: Scroll-lock, Cap-lock, Num-lock, Alt, Ctrl & Win

Security: Password enable & disable, up to 8 users profile for port access

PC Selection: Front button, OSD menu & hotkey

▀ Expansion: Up to 128 servers by 8-level cascade

▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server

Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power

Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord OR

AC / DC power adapter [email protected] (optional)

Option DC: 12V / 24V / 48V DC input

Consumption: Max. 48 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C

Storage: -5 to 60°C

Relative humidity: 90%, non-condensing

Shock: 50G peak acceleration (11ms, half-sine wave)

Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information
Dimension (W x D x H): 446 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch

Net weight: 4 kg / 9 lb

▀ Packing Information

Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch

Gross weight: 7 kg / 15 lb

P. 106
5.4 Specifications Combo DB-15 Two Console KVM

NVCE800 / NVCE1600
▀ KVM Port
Number of ports: 8 or 16

Connector: DB-15 combo connector

Connectivity: Combo 4-in-1 KVM cable, up to 6, 10 & 15 feet

▀ Local Console
Graphic connector: 1 x DB-15 VGA

Resolution: Up to 1600 x 1200

Input device: 2 x USB type A for keyboard & mouse

▀ Remote Console

Connector: HDDB 15-pin, VGA

Resolution: Up to 1600 x 1200 (500 feet), Up to 1024 x 768 (1000 feet)

Input device: 2 x USB type A for keyboard & mouse

Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1000 feet

Compensation: Auto adjust for cable length

▀ Expansion: Up to 128 servers by 8-level cascade

▀ Compatibility

Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server

Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix, DOS

▀ Power

Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord OR

AC / DC power adapter [email protected] (optional)
Option DC: 12V / 24V / 48V DC input

Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C

Storage: -5 to 60°C

Relative humidity: 90%, non-condensing

Shock: 50G peak acceleration (11ms, half-sine wave)

Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information

Dimension (W x D x H): 446 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch

Net weight: 4 kg / 9 lb

▀ Packing Information

Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch

Gross weight: 7 kg / 15 lb

P. 107
5.4 Specifications Combo DB-15 IP KVM

NVIP-802 / NVIP-1602
▀ KVM Port
Number of ports: 8 or 16
Connector: DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable, up to 6, 10 & 15 feet

▀ Local Console
Graphic connector: 1 x DB-15 VGA
Resolution: Up to 1600 x 1200
Input device: 2 x USB type A for keyboard & mouse

▀ IP Remote Console
Connector: RJ45 Ethernet
User management: 15-user login, 1 x active user
Network protocol: DHCP / BOOTP / DNS
Security: SSL v3, RSA, AES, HTTP / HTTPs, CSR
Resolution: Up to 1600 x 1200
Browser: IE, Firefox, Safari, Netscape
Others: Serial port, virtual media via USB

▀ Expansion: Up to 128 servers by 8-level cascade

▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power
Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord OR
AC / DC power adapter [email protected] (optional)
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information
Dimension (W x D x H): 446 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb

▀ Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb

P. 108
6.1 KVM Button Combo KVM Usage

Power ON
■ Turn off all servers and KVM switches
■ Make sure all cables / connectors are properly connected
■ Recommend Power ON sequence is monitor, KVM switch finally computer

Front Panel - Port LED Indications

8 ports

16 ports

Bank no. 7-Segment BANK LED indication

PC port LEDs Power : Orange LED on indicating a PC is connecting to the port

Access : Red LED on indicating a selected channel

Channel button Press to select channel from 01 to 32

Bank button Select the bank from 1 to 8

P. 109
6.2 Password Combo KVM Usage

The password is disabled by default ( i.e. There is no password required when you power on the KVM switch for the first time)
■ Enable password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P
3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field
(Do not use “0” on number pad)
4. In USER level, press Space bar + Enter in user name & password field
Remark: Automatic logout after 10 minutes of inactivity

■ Set your own user name & password

1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name & password
field
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Set password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password
b. In the row 1 to 8 (USER), press Enter to set your own user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character

■ Change your password

1. Login the KVM in SUPERVISOR level by pressing your own user name & password
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Change password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password
b. In the row 1 to 8 (USER), press Enter to change your user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character

■ Disable your password

1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P
3. You don’t need user name & password to access the KVM OSD menu

■ Forget your password

Please contact your supplier for further support

Remark:
■ You must press the KVM hotkey within 2 seconds

■ A beep sound will be heard for successful entering KVM hotkey

P. 110
6.3 KVM OSD Combo KVM Usage
OSD Menu

OSD operation

next to the system name The PC is powered on

next to the system name The PC is selected

F1 Access F1 MAIN MENU

F2 Logout the OSD menu

F3 Previous menu

Esc Cancel / Quit

Enter Complete / Switch to selected port

Switch to previous or next port

PgUp/PgDn Switch to previous bank or next bank

Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32
1/2/3/4 Remark: Display port 17 ~ 32 for 32 port model only

F1 Main Menu

01 LANGUAGE OSD language change

02 PORT NAME EDIT Define port name

03 PORT SEARCH Quick searching by port name

04 USER SECURITY Change password

05 ACCESS LIST Define user access authority

06 HOTKEY Change hotkey

07 TIME SETTINGS Modify scan display time interval

08 OSD MOUSE Modify OSD mouse speed

P. 111
6.4 KVM Hotkey Combo KVM Usage
Local Console Hotkey
Hotkey Function

Scroll Lock + Scroll Lock + Space Bar Calling OSD menu

Right-button mouse + Esc Calling OSD menu

Scroll Lock + Scroll Lock + Switch to previous port

Scroll Lock + Scroll Lock + Switch to next port

Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank

Scroll Lock + Scroll Lock + Bank no. + Port no. Switch to specific port

Turn the buzzer ON and OFF

Scroll Lock + Scroll Lock + B
* Default the buzzer is ON

Logout the KVM if password security is ON. Show up the status

Scroll Lock + Scroll Lock + P
windows

Advance hotkeys (for Supervisor login only)

Activate auto-scan mode for connected servers
Scroll Lock + Scroll Lock + S
*Press any key to exit the auto-scan mode

Reset all the KVM settings to factory default

Scroll Lock + Scroll Lock + R
*Except User Security settings

Disable and enable password security

Scroll Lock + Scroll Lock + U
*Default security is OFF

To enable / disable the screen saving function and 10 minutes auto-

Scroll Lock + Scroll Lock + L logout
*Default the screen saving is OFF

Remarks:
■ Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.”

- Bank No. : 1 to 8

- Port No. : 01 to 16

- e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0 + 4

- e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6

■ You must press the hotkey within 2 seconds

■ A beep sound will be heard for successful entering

■ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp, PgDn, and Enter keys
are supports
Remote Console Hotkey
Hotkey Function
Caps Lock + Caps Lock + F1 Show up the Help OSD windows

Select Hotkey
Caps Lock + Caps Lock + F2
*Default is Caps Lock

Caps Lock + Caps Lock + C Toggle switch between remote & local port

Caps Lock + Caps Lock + Q Turn the buzzer ON & OFF

*Default the buzzer is ON

Caps Lock + Caps Lock + S Activate auto-scan mode for remote & local port
*The scan time interval is 5 seconds

Caps Lock + Caps Lock + A Auto-adjust the video signal

P. 112
6.5 IP Setting Combo KVM Usage

Quick Installation Guide of IP KVM for remote access

Please perform the follow steps
1. Power off all KVM hardware and connected devices.
2. Connect the power supply to IP KVM
3. Connect the monitor, keyboard & mouse to console port of IP KVM (not applicable to integrated LCD drawer version)
4. Connect the KVM cable to IP KVM and target servers
5. Use an Ethernet cable to connect your local area network (LAN) to the IP console port on the KVM

Initial IP configuration
The factory default, DHCP mode is disable (IP auto configuration = None), and the preset default address as below :
IP address : 192.168.1.22 (default)
Subnet-mask : 255.255.255.0
Default Gateway: None

Install the “PSetup.exe” program from the provided CD-disc to a computer which networked with IP KVM switch, then press
Refresh Devices the look for the IP-KVM.
a. Select the MAC address from label on the bottom of the IP-KVM switch
b. Click Query Device

1. Configure the IP KVM with fixed address

a. Setup “IP auto configuration” as “None”; setup IP address and Subnet mask
b. Enter Super user login and password for Authentication (default : super/pass)
c. Setup Device. If super login was authenticated, it’ll show “Successfully configured device”.
Otherwise it’ll show “Permission Denied”.

2. Configure the IP KVM with DHCP

a. Setup “IP auto configuration” as “DHCP”
b. Enter Super user login and password for Authentication (default : super/pass)
c. Setup Device. If super login was authenticated, it’ll show “Successfully configured device”.
Otherwise it’ll show “Permission Denied”.

3. Install JVM on Client system

The IP-KVM switch was remote accessed by a standard JAVA enabled web browser. The client system
must install Sun JVM 1.4.2 or above for remote access the IP KVM.

Remark:
■ At a minimum, you must have Internet Explorer 6.0 or Netscape 7.0 or Molliza 1.6 (and above) install on your client
computer.

P. 113
6.5 IP Setting Combo KVM Usage

4. Remote access the IP-KVM switch via Web

Using the HTTP protocol or a secure encrypted connection via HTTPS and entering the configured IP address of IP KVM
switch into the web browser to remote access the IP KVM switch.

With successful connection to IP KVM, the login page will show as below, then key in the default user name & password

5. After successful login to IP KVM, you will enter the main page of IP KVM as below :

Remark:
■ We strongly recommend the user changes the default username and password to user specific values

■ Please refer to the “IP KVM User Manual” for more detailed information about IP KVM switch.

6. Bandwidth

P. 115
6.6 Optional Accessories Combo KVM Usage

1. Combo 4-in-1 KVM cable

1.1 NE-6 6 feet
1.2 NE-10 10 feet
1.3 NE-15 15 feet

2. Cat5 cable
2.1 NU-3 3 feet
2.2 NU-6 6 feet
2.3 NU-10 10 feet
2.4 NU-15 15 feet
2.5 NU-33 33 feet
2.6 NU-66 66 feet

3. Cat6 / USB KVM cascade cable

3.1 CBC-6 6 feet

4. DVI-USB Dongle
4.1 IF_DDVI DVI-D

5. VGA-USB Dongle
5.1 IF_DUSB USB

6. VGA-PS/2 Dongle
6.1 IF_DPS2 PS/2

7. Power Cord
7.1 IEC power cord
7.2 NEMA 5-15 power cord (US)
7.3 BS 1363 power cord (UK)
7.4 CEE 7/4 power cord (German)
7.5 AS 3112 power cord (Australia)

P. 115
6.7 DC Power 12V, 24V, 48V Input Combo KVM Usage

Model 12V 24V 48V

Input rating

Input voltage: 12-Volt 24-Volt 48-Volt

Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V

Input current

- No load 50 mA 50 mA 50 mA

- Full load 4950 mA 2450 mA 1220 mA

Output rating

Output voltage: 12-Volt 12-Volt 12-Volt

Output current: 4.16A 4.16A 4.16A

Efficiency 84% 85% 85%

Remarks:
■ Package does not include power cord

P. 116
7.1 NV401A / NV801A / NV1601A PS/2 DB-15 KVM

Package Content (only for rackmount KVM)

1 KVM switch x 1 pc

2 Screw M3.2 x 4.5mm x 4 pcs

3 Screw M4 x 10mm x 8 pcs

4 Bracket x 1 set

5 User manual x 1 p

6 Power cord x 1 pc

P. 117
7.1 NV401A / NV801A / NV1601A PS/2 DB-15 KVM

Connection

NV401A

NV801A

NV1601A

P. 118
7.1 NV401A / NV801A / NV1601A PS/2 DB-15 KVM

P. 119
7.1 NV401A / NV801A / NV1601A PS/2 DB-15 KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Cascading multiple KVM by NA-6 cable.

P. 120
7.1 NV401A / NV801A / NV1601A PS/2 DB-15 KVM

Cascade
■ Cascade up to 8 levels, 128 servers
■ Cascading multiple KVM by NA-6 cable.

P. 121
7.2 Specifications PS/2 DB-15 KVM

NV401A / NV801A / NV1601A

▀ KVM Port
Number of ports: 4, 8 or 16

Connector: DB-15 combo connector

Connectivity: Combo 4-in-1 KVM cable, up to 6, 10 & 15 feet

▀ Local Console
Graphic connector: 1 x DB-15 VGA

Resolution: Up to 1600 x 1200

Input device: 2 x USB type A for keyboard & mouse

▀ Management

Multilingual OSD: English, France, German, Spanish, Italian, Russian, Simplified Chinese,
Japanese

Hotkey combination: Scroll-lock, Cap-lock, Num-lock, Alt, Ctrl & Win

Security: Password enable & disable, up to 8 users profile for port access

PC Selection: Front button, OSD menu & hotkey

▀ Expansion: Up to 128 servers by 8-level cascade

▀ Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server

Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix

▀ Power

Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord OR

AC / DC power adapter [email protected] (optional)

Option DC: 12V / 24V / 48V DC input

Consumption: Max. 48 Watt, Standby 5 Watt

▀ Regulatory Approval: FCC, CE

▀ Environmental
Operating: 0 to 50°C

Storage: -5 to 60°C

Relative humidity: 90%, non-condensing

Shock: 50G peak acceleration (11ms, half-sine wave)

Vibration: 58~100Hz / 0.98G (11ms / cycle)

▀ Product Information
Dimension (W x D x H): 446 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch

Net weight: 4 kg / 9 lb

▀ Packing Information

Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch

Gross weight: 7 kg / 15 lb

P. 122
8.1 KVM Button PS/2 KVM Usage
Power ON
■ Turn off all servers and KVM switches
■ Make sure all cables / connectors are properly connected
■ Recommend Power ON sequence is monitor, KVM switch finally computer

Front Panel - Port LED Indications

4 ports (only for NV401A)

Online Channel Green LED on indicating a PC is connecting to the port

Selected Channel RED LED on indicating a selected channel

Bank Button Select the bank from 1 to 8

Channel Select Button Press to select channel from 1 to 8

Bank No. 7-Segment BANK LED indication

8 ports

16 ports

Bank no. 7-Segment BANK LED indication

PC port LEDs Power : Orange LED on indicating a PC is connecting to the port

Access : Red LED on indicating a selected channel

Channel button Press to select channel from 01 to 16

Bank button Select the bank from 1 to 8

P. 123
8.2 Password PS/2 KVM Usage

The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad)

■ Set your own user name & password

1. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
2. Select “CHANGE PASSWORD”
3. Enter “00000000” eight zeros in password field
(Do not use “0” on number pad)
4. Set your own password in “ENTER NEW PASSWORD” field
5. Retype your own new password in “RETYPE NEW PASSWORD” field
Remark: a. Blank has underscore. SPACE does not have underscore.
b. Press any alphanumeric key to move to next input item.

■ Change your password

1. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
2. Select “CHANGE PASSWORD”
3. Enter your own password
4. Change your password in “ENTER NEW PASSWORD” field
5. Retype your new password in “RETYPE NEW PASSWORD” field
Remark: a. Blank has underscore. SPACE does not have underscore.
b. Press any alphanumeric key to move to next input item.

■ Forget your password

Please contact your supplier for further support

Remark:
■ You must press the KVM hotkey within 2 seconds

■ A beep sound will be heard for successful entering KVM hotkey

P. 124
8.3 KVM OSD PS/2 KVM Usage

OSD operation

next to the system name The PC is powered on

next to the system name The PC is selected

OSD OSD menu on screen time

SCAN Scan interval from one PC port to next PC when applying auto scan

CHANGE PASSWORD Change to a new password

ON - quit the OSD menu without password

Console ON/OFF OFF - password is requested while quitting the
OSD menu

ESC QUIT

TAB NEXT

Select port for destination PC name and press “Enter” to select

PgUp / PgDn To switch previous or next bank

ENTER Complete

INSERT Edit

P. 125
8.4 KVM Hotkey PS/2 KVM Usage

Hotkey Function

Scroll Lock + Scroll Lock + Space Bar Calling OSD menu

Scroll Lock + Scroll Lock + Switch to previous port

Scroll Lock + Scroll Lock + Switch to next port

Scroll Lock + Scroll Lock + PgUp Switch to previous bank

Scroll Lock + Scroll Lock + Bank no. + Port no. Switch to specific port

Scroll Lock + Scroll Lock + PgDn Switch to next bank

Scroll Lock + Scroll Lock + S Auto scan for powered on PC

Scroll Lock + Scroll Lock + R Reset to factory default setting

Scroll Lock + Scroll Lock + B Enable / Disable beeper sound

Scroll Lock + Scroll Lock + F Find port by name

Remarks:
■ Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.”

- Bank No. : 1 to 8

- Port No. : 01 to 16

- e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0 + 4

- e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6

P. 126
8.5 Optional Accessories PS/2 KVM Usage

1. PS/2 3-in-1 KVM cable

1.1 ND-6 6 feet
1.2 ND-10 10 feet
1.3 ND-15 15 feet
1.4 ND-33 33 feet

2. PS/2 KVM cascade cable

2.1 NA-2 2 feet
2.2 NA-6 6 feet
2.3 NA-10 10 feet
2.4 NA-15 15 feet

3. SUN / iMAC USB to PS/2 adapter

3.1 SUN-31 kit

4. Power cord
4.1 IEC power cord
4.2 NEMA 5-15 power cord (US)
4.3 BS 1363 power cord (UK)
4.4 CEE 7/4 power cord (German)
4.5 AS 3112 power cord (Australia)

P. 127
8.6 DC Power 12V, 24V, 48V Input PS/2 KVM Usage

Model 12V 24V 48V

Input rating

Input voltage: 12-Volt 24-Volt 48-Volt

Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V

Input current

- No load 50 mA 50 mA 50 mA

- Full load 4950 mA 2450 mA 1220 mA

Output rating

Output voltage: 12-Volt 12-Volt 12-Volt

Output current: 4.16A 4.16A 4.16A

Efficiency 84% 85% 85%

Remarks:
■ Package does not include power cord

P. 128
FAQ

General
1. How do the KVM switches allow the user to switch ports?
There are two ways to switch ports. One is the membrane buttons on the front and the other way is
with Hot-key commands.

2. What operating systems do the KVMs support?

The KVMs support multi-platform support allows you to control Windows-based computers, Sun So-
laris systems, Linux, or even Macs by a single KVM switch. The KVM switches support multi-platform
operating systems including but not limited to DOS, Windows 95/98/ME/NT/2000/XP, Linux, Solaris
and Mac OS.

3. Do I have to power down the KVMs to add a new server?

The KVMs are hot-pluggable and allows servers or devices to be added or removed without power-
ing down the switch, but components of connected devices, such as the servers, may not be hot-
pluggable. We suggest that turn off power to all devices before connecting them.

4. Why I can’t login with default password on KVM switch

The default username and password for the KVM switch is eight zeros - “00000000”. Please check
i. The “Num lock” is not turned on. (for notebook type keyboard)
ii. The numeric (number) keys on the number pad are not accepted by KVM, only the main
number keys.

5. Can I disable the KVM password?

Yes, for Matrix KVM, Cat6 KVM & Combo DB-15 KVM, user can disable/ enable the KVM password
by hotkey.
No, for PS/2 KVM, user can’t disable the KVM password.

6. What do I do if I forget the password?

If the user change the default password and lose the password, please contact the supplier for further
support.

7. How many levels of KVM cascade are supported?

8 levels are supported.

8. Can I cascade the different types KVM switches together?

No, only same type KVM can cascade together. (e.g. PS/2 to PS/2, USB to USB,..)

9. Why am I getting ghosting images or shadowing?

i. Check that all video cables are inserted properly.
ii. Check whether the KVM supports the resolution and refresh-rate on your servers.
iii. Check whether the graphics card you are using supports the resolution and refreshrate on
your server or not.
iv. Connect the monitor directly into the servers you are having trouble with to see if problem
still appears.

P. 129
FAQ

10. The server VGA resolution does not match the resolution of monitor?
The KVM supports DDC function which will dynamically detect and the DDC data.
The problem may come from the power on sequence.
- For KVM switch
The recommended power on sequence is – monitor, KVM switch and then servers.
- For remote console box
It supports DDC function but does not support hot-plug, the recommend power on se-
quence is – monitor, remote console box and then servers.

PS/2 KVM
Can I connect to Suns (USB type) and/or Macs system to PS/2 KVM switches?
Yes. Use PS/2 to USB converter (SUN-31 kit) to converter the keyboard & mouse of PS/2 KVM ca-
ble (ND-6) to USB interface. The SUN-31 kit includes the built-in mapping of all the Suns & Macs
system hotkey.

Combo KVM
Can the Combo KVM support the keyboard or monitor with a USB hub built-in?
The Combo KVM switch is only capable of passing Keyboard, Mouse and Video signals. As a result,
other USB devices with a USB hub will not work.

Can I use the touch screen with KVM switches?

No, the KVM switches do not support the touch screen driver

Two console KVM

What is the resolution support on remote console?
The remote console can support up to 1,000 feet at 1024 x 768, and up to 500 feet at 1600 x 1200.

Why am I getting ghosting images or shadowing on remote console?

Press “Scroll lock + Scroll lock + A” on the keyboard connected to remote console box to force auto-
adjusting the video signal to optimize.

Cat6 KVM
Can I use standard Cat6 cable for dongle?
The dongle can support Cat5/5e/6 straight cable. To maximum performance and stability, we
strongly recommend applying the Cat6 cable (NU-3 / 6 / 10 / 15 / 33 / 66) from us, we are designed
and qualification tested using pre-made (factory made) Cat5e cable assemblies in fixed lengths.
Using this type of cable assembly will provide excellent link connections and data communication. As
poorly made field cable assemblies can cause damage to the Cat5 KVMs & dongles and result in a
poor or intermittent link. The warranties do not apply to damage resulting from user-supplied cable.

P. 130
Troubleshooting

1. There is no LED display on KVM membrane switch

i. Make sure the power adapter plugged into the KVM Switch, if the LED’s still off, perform soft
reset to KVM switch.
ii. Power cycle KVM switch.

2. I can power on the KVM, but I am not getting any picture at all, how can I solve this?
Switching to another port and checking if this port has the same problem
a. If you switch to another port, please check the screen resolution is the same.
b. Check the OSD menu is available on the hot keys “Scroll lock + Scroll lock + space bar”.
If the problems persist, please make sure the cables are inserted properly and the boot up
sequence is followed.

3. The screen is on but the keyboard and mouse don’t work

i. Check the server by using a different keyboard and mouse.
ii. For PS/2 servers
The keyboard and mouse are not hot pluggable.
iii. For USB servers
Unplug and plug allowing a few seconds for the bus emulation process to complete.
iv Do not press any keys on the keyboard whilst the server is booting up. This can cause a
keyboard error or cause the keyboard not to detect the KVM switch.
v. Try a different keyboard, but use only 101/102/104-key keyboard
vi. Avoid moving the mouse whilst switching the KVM ports.

4. There is no LED display on the dongle

The LED on the dongle will flash when plugged into the USB or PS/2 server. The light will then become
steady when the KVM switch has connected. If the LED light is on and not flashing when plugged into
server, please unplug the USB or PS/2 and try again. Or try another good dongle to verify if problem
still appears. If the problem persists, please contact your supplier.

The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this
publication.

All brand names, logo and registered trademarks are properties of their respective owners.

i-Tech Company LLC

TOLL FREE: (888) 483-2418 • EMAIL: [email protected] • WEB: www.iTechLCD.com

P. 131