STRUCTURAL ANALYSIS AND DESIGN REPORT  

STRUCTURAL DESIGN BY: 
PROJECT: PROPOSED 2-STOREY RESIDENTIAL HOUSE ENGR. KARIZZA A. AVELINO 

LOCATION: VALENZUELA CITY

ELEVATION VIEW TABLE OF CONTENTS

A. PERSPECTIVE/PICTORIAL VIEW
B. STRUCTURAL DESIGN DATA AND
CRITERIA
C. STRUCTURAL MODELING AND
BOUNDARY CONDITION
D. STRUCTURAL LOADING
E. STRUCTURAL ANALYSIS
F. SLAB DESIGN
G. ROOF FRAMING DESIGN
H. BEAM DESIGN
I. COLUMN DESIGN
J. FOUNDATION DESIGN

ENGR. KARIZZA A. AVELINO

JANUARY 14, 2020
  

B. STRUCTURAL DESIGN DATA AND

CONSIDERATION

 
 
 Structural Design Criteria and Considerations

The design criteria and considerations used by the engineer are based on NSCP 2015. Some load factors are used
to cover miscellaneous and accidental loads made in the structure. Materials strength and specifications, Load Cases, load
combinations and load calculations are explain briefly in this context.

1. Code and Standard

The design of structural engineering systems for the project is in accordance with the laws and
regulations imposed by the Philippine government. The current issue or edition of the document at the
time of design will be applied. The codes to be used is NSCP 2015.

2. Materials Strength

Concrete Strength @ 28 days (fc’) : 20.7 MPa

Reinforcements Yield Strength (Fy) :

Main Reinforcement
D12 and smaller : 276 MPa
D16 and above : 414 Mpa

Elastic Modulus of Elasticity (Es) : 200,000 Mpa

Density
Concrete : 24 kN/m3
Steel : 76 kN/m3

Gross Allowable soil bearing Capacity : 90 kPa

Hot Rolled Sections (Fy) : 250 MPa

Hot Rolled Sections (Fu) : 400 MPa

Other Materials
Other materials such as anchor bolts, embedded metal, shear connectors will be shown in
structural drawings if applicable.
3. Load Cases

3.1. Dead Load (Self Weight)

Selfweight of the structure is automatically computed by the computer analysis program used
by the engineer. A Load Factor of 1 is used in the design. The densities inputted in the
program are the densities stated above hereon.

3.2. Super Dead (Super Imposed Dead Load)

Dead load of structure is computed using specific density using minimum dead load in NSCP
2015. This Load Cases includes Roofing Materials, Ceiling Materials, masonry, beams,
columns, slabs and other pertinent imposed dead load on the structure.

Roof Dead Load : 0.8 kPa

GI sheet 0.05 kPa
Purlins 0.05 kPa
Ceiling : 0.2 kPa
(Gypsum board & metal furring)
Toppings (25mm thick) : 0.6 kPa
Wall Loads
4 inch-CHB : 1.9 kPa
5 inch-CHB : 2.4 kPa
6 inch-CHB : 2.9 kPa
8 inch-CHB : 3.8 kPa

Structural Design and Consideration Rev.0

 *Add 0.24 kPa for each face plastered
Utilities : 0.1 kPa
Floor Finish (Ceramic tile) : 0.5 kPa
Movable Partition : 0.5 kPa (Residential)
1.0 kPa (Office)
Water Proofing Membrane : 0.07 kPa
(Bituminous smooth surface)

3.3. Live Load

Live load on the structure is computed using specific values given in the table of NSCP.

3.3.1. Offices / Units = 2.40 KPa

3.3.2. Residential = 1.90 KPa
3.3.3. Balcony = 2.90 KPa
3.3.4. Multipurpose Area / Conference Room = 4.80 KPa
3.3.5. Lobby / Corridors = 3.80 KPa

3.4. Roof Live Load

Roof Live load is used for construction and maintenance purposes. 1.0 kPa is used as per
NSCP 2015.

3.5. Wind Load

Wind Load Used in computation is based on NSCP 2015 or ASCE. Parameters used was
based on specific location of the project in the Philippines.

3.6. Seismic Load

Seismic Load Used in computation is based on NSCP 2015 or UBC 1997. Parameters used is
based on specific seismic zone area in the Philippines.

4. Load Combinations

4.1 (Ultimate) The Following Load Combinations are used in Concrete Design and Steel Design Using LRFD.

4.1.1 1.4DL
4.1.2 1.2DL + 1.6LL + 0.5RLL
4.1.3 1.2DL + 1.6RLL + 0.5W
4.1.4 1.2DL + W + 0.5LL + 0.5RLL
4.1.5 1.2DL + EQX + 0.3EQZ + 0.5LL
4.1.6 1.2DL + EQX - 0.3EQZ + 0.5LL
4.1.7 1.2DL - EQX + 0.3EQZ + 0.5LL
4.1.8 1.2DL - EQX - 0.3EQZ + 0.5LL
4.1.9 1.2DL + EQZ + 0.3EQX + 0.5LL
4.1.10 1.2DL + EQZ - 0.3EQX + 0.5LL
4.1.11 1.2DL - EQZ + 0.3EQX + 0.5LL
4.1.12 1.2DL - EQZ - 0.3EQX + 0.5LL

(NOTE: EQ INCLUDES THE VERITCAL EFFECT OF EARTHQUAKE)

4.2 (Service) The Following Load Combinations are used in Steel Design Using ASD.

4.2.1 DL
` 4.2.2 DL + LL
4.2.3 DL + RLL
4.2.4 DL + 0.75LL + 0.75RLL
4.2.5 DL + 0.6W
4.2.6 DL + 0.72EQX + 0.22EQZ
4.2.7 DL + 0.72EQX - 0.22EQZ
4.2.8 DL - 0.72EQX + 0.22EQZ
4.2.9 DL - 0.72EQX - 0.22EQZ

Structural Design and Consideration Rev.0

 4.2.10 DL + 0.72EQZ + 0.22EQX
4.2.11 DL + 0.72EQZ - 0.22EQX
4.2.12 DL - 0.72EQZ + 0.22EQX
4.2.13 DL - 0.72EQZ - 0.22EQX

(NOTE: EQ INCLUDES THE VERITCAL EFFECT OF EARTHQUAKE)

5.3 (Foundation) The Following Load Combinations are used in Design of Foundation for Service Condition.

4.3.1 DL + 0.75LL + 0.75RLL + 0.75W

4.3.2 DL + 0.75LL + 0.75RLL + 0.54EQX + 0.16EQZ
4.3.3 DL + 0.75LL + 0.75RLL + 0.54EQX - 0.16EQZ
4.3.4 DL + 0.75LL + 0.75RLL - 0.54EQX + 0.16EQZ
4.3.5 DL + 0.75LL + 0.75RLL - 0.54EQX - 0.16EQZ
4.3.6 DL + 0.75LL + 0.75RLL + 0.54EQZ + 0.16EQX
4.3.7 DL + 0.75LL + 0.75RLL + 0.54EQZ - 0.16EQX
4.3.8 DL + 0.75LL + 0.75RLL - 0.54EQZ + 0.16EQX
4.3.9 DL + 0.75LL + 0.75RLL - 0.54EQZ - 0.16EQX
4.3.10 DL + W
4.3.11 0.6DL + 0.72EQX + 0.22EQZ
4.3.12 0.6DL + 0.72EQX - 0.22EQZ
4.3.13 0.6DL - 0.72EQX + 0.22EQZ
4.3.14 0.6DL - 0.72EQX - 0.22EQZ
4.3.15 0.6DL + 0.72EQZ + 0.22EQX
4.3.16 0.6DL + 0.72EQZ - 0.22EQX
4.3.17 0.6DL - 0.72EQZ + 0.22EQX
4.3.18 0.6DL - 0.72EQZ - 0.22EQX
4.3.19 DL + LL
4.3.20 DL + LL + 0.72EQX + 0.22EQZ
4.3.21 DL + LL + 0.72EQX - 0.22EQZ
4.3.22 DL + LL - 0.72EQX + 0.22EQZ
4.3.23 DL + LL - 0.72EQX - 0.22EQZ
4.3.24 DL + LL + 0.72EQZ + 0.22EQX
4.3.25 DL + LL + 0.72EQZ - 0.22EQX
4.3.26 DL + LL - 0.72EQZ + 0.22EQX
4.3.27 DL + LL - 0.72EQZ - 0.22EQX

5. Computer Softwares

To give the designer a more accurate values of design forces to be used in the design, the designer used
computer software and tools to obtain optimum quality and economy in the design. The following computer
software will be used.

5.1 STAAD.Pro V8i : Bently

5.2 ETABS 2016 : Computer and Structure Institute
5.3 Safe : Computer and Structure Institute
5.4 SP Column : Structure Point
5.5 Staad RCDC : Bentley
5.6 Staad Advanced Foundation : Bentley
5.7 Microsoft Excel : Microsoft

6. Factors of Safety
The following Factors of safety is used.

6.1 Overturning Moment : 1.5

6.2 Sliding : 1.5
6.3 Uplift : 1.1
6.4 Accidental Load : 2.0

Structural Design and Consideration Rev.0

  

C. STRUCTURAL MODELING AND BOUNDARY

CONDITION

 
 
THREE DIMENSIONAL STRUCTURAL MODEL
 

 
 

BOUNDARY CONDITION (FIXED)

  

D. STRUCTURAL LOADING

 
 
 Seismic Load Parameters

Occupancy Category Standard Occupancy

Stucture Height (hn) 6.55 m
Structure Type Concrete Structure
Importance Factor (Iw) 1.00
Soil Type Stiff Soil Profile (SD)
Seismic Zone Number 4
Seismic Zone Factor (Z) 0.4
Distance From known seismic source 10 km
Seismic Source type A
Near Source Factor (Na) 1
Near Source Factor (Nv) 1.2
Seismic Coefficient (Ca) 0.44
Seismic Coefficient (Cv) 0.768
Basic Seismic Force Resisting Frame Special Reinforced Concrete Moment Frames

Seismic Numerical Coefficient (R) 8.5

Ct 0.0731
Structural Time Period (s): 0.299
Maximum Base Shear 0.129 x W
Minimum Base Shear 0.048 x W
Governing Base Shear 0.129 x W

DESIGN RESPONSE SPECTRA
1.2
1.1 1.1

1
Spectral Acceleration (m/s2)

0.8

0.611
0.6
0.44 0.423
0.4 0.324
0.262
0.22
0.19 0.167
0.2 0.149 0.134
0.122 0.112 0.104 0.096
0.09 0.085

0
0 1 2 3 4 5 6 7 8 9 10
Period (Seconds)

* Seismic Analysis is based on Unified Building Code (1997). No part of

this file shall be disclosed to third party without prior written
approval of the designer.
  

DEAD LOAD 
 

LIVE LOAD 
  
 

SEISMIC LOAD (X-DIR.) 

 

SEISMIC LOAD (Z-DIR.) 

  

E. STRUCTURAL ANALYSIS

 
 
  

DEFLECTIONS UNDER GOVERNING LOAD CASE (DEAD +

LIVE + SEISMIC) 

SAMPLE SHEAR DIAGRAM UNDER GOVERNING LOAD CASE

(DEAD + LIVE + SEISMIC) 
  

SAMPLE MOMENT DIAGRAM UNDER GOVERNING LOAD

CASE (DEAD + LIVE + SEISMIC) 
 

SAMPLE AXIAL DIAGRAM UNDER GOVERNING LOAD CASE

(DEAD + LIVE + SEISMIC) 
  

F. SLAB DESIGN

 
 
 Slab Number: S1 Date: January 12, 2020
Project Name: Proposed 2-Storey Residence With Deck Designed by: Karl Anthony V. Tan

FLEXURE REINFORCEMENT ALONG LONG DIRECTION

Interior Beam
C1 C2
G1
Interior -1.67 / 2 1.36 / 2 -0.38 / 2
Column Strip -0.835 0.68 -0.19

-3.71 / 2 3.02 / 2 -0.85 / 2

-1.855 1.51 -0.425
Middle Strip
Interior Beam Edge Beam
G3 G4
-3.71 / 1 3.02 / 1 -0.85 / 1
-3.71 3.02 -0.85
Exterior
Column Strip -1.67 / 1 1.36 / 1 -0.38 / 1
-1.67 1.36 -0.38
C3 G2
C4

Edge Beam

ROW A ROW B ROW C

Flexure Reinforcement
TOP BOTTOM TOP BOTTOM TOP BOTTOM
Mu -0.835 0.68 -7.42 6.04 -1.67 1.36
Slab Width 650 650 1500 1500 650 650
tprovided 100 100 100 100 100 100
cc 20 20 20 20 20 20
fc' 20.7 20.7 20.7 20.7 20.7 20.7
fy 414 414 414 414 414 414
Φ 0.90 0.90 0.90 0.90 0.90 0.90
ß1 0.85 0.85 0.85 0.85 0.85 0.85
d 62 62 62 62 62 62
Ru 0.37 0.30 1.43 1.16 0.74 0.60
ρcalc 0.00091 0.00074 0.00361 0.00291 0.00183 0.00149
ρmin 0.00121 0.00098 0.00338 0.00338 0.00244 0.00198
ρmax 0.01548 0.01548 0.01548 0.01548 0.01548 0.01548
ρreq. 0.00121 0.00098 0.00361 0.00338 0.00244 0.00198
As req. 78.373 63.696 335.428 507.246 158.494 128.537
nomimal db 12 12 12 12 12 12
No. of Bars 1 1 3 5 2 2
Max. Spacing 200 200 200 200 200 200
Spacing Provided 200 200 200 200 200 200
Judgement OK OK OK OK OK OK

Flexure Reinforcement for whole Slab Width:

No. of bottom bars 15

No. of top bars 15
Asprov. For bottom bars 1696.46
Asprov. For top bars 1696.46
ρprov for bottom bars 0.00977
ρprov for top bars 0.00977
Ratio in bottom bars 0.41232
Ratio in top Bars 0.33735
Judgement OK

Crack Control Check:

ROW A ROW B ROW C

TOP BOTTOM TOP BOTTOM TOP BOTTOM
Mservice 0.632545476 0.515126855 5.620943035 4.575538535 1.265090953 1.03025371
k 0.340576961 0.340576961 0.340576961 0.340576961 0.340576961 0.340576961
fs 29.2236821 23.79892674 112.5315918 91.60253566 58.4473642 47.59785348
Crack Spacing 2850 3525 725 900 1425 1750
Judgement OK OK OK OK OK OK
FLEXURE REINFORCEMENT ALONG SHORT DIRECTION

Interior Column Exterior Column

Middle Strip
Strip Strip
Interior Beam

C1 G1 C2
-1.93 / 2 -4.3 / 2 -4.3 / 1 -1.93 / 1
-0.965 -2.15 -4.3 -1.93

Interior Beam 1.58 / 2 3.5 / 2 3.5 / 1 1.58 / 1 Edge Beam

0.79 1.75 3.5 1.58
G3 G4

-0.44 / 2 -0.98 / 2 -0.98 / 1 -0.44 / 1

-0.22 -0.49 -0.98 -0.44
C3 G2 C4

Edge Beam

ROW D ROW E ROW F

Flexure Reinforcement
TOP BOTTOM TOP BOTTOM TOP BOTTOM
Mu -0.965 0.79 -8.6 7 -1.93 1.58
Slab Width 650 650 1500 1500 650 650
tprovided 100 100 100 100 100 100
cc 20 20 20 20 20 20
fc' 20.7 20.7 20.7 20.7 20.7 20.7
fy 414 414 414 414 414 414
Φ 0.90 0.90 0.90 0.90 0.90 0.90
ß1 0.85 0.85 0.85 0.85 0.85 0.85
d 74 74 74 74 74 74
Ru 0.30 0.25 1.16 0.95 0.60 0.49
ρcalc 0.00073 0.00060 0.00291 0.00235 0.00148 0.00121
ρmin 0.00098 0.00080 0.00338 0.00313 0.00197 0.00161
ρmax 0.01548 0.01548 0.01548 0.01548 0.01548 0.01548
ρreq. 0.00098 0.00080 0.00338 0.00313 0.00197 0.00161
As req. 63.451 51.862 507.246 469.279 128.037 104.477
nomimal db 12 12 12 12 12 12
No. of Bars 1 1 5 5 2 1
Max. Spacing 200 200 200 200 200 200
Spacing Provided 200 200 200 200 200 200
Judgement OK OK OK OK OK OK

Flexure Reinforcement for whole Slab Width:

No. of bottom bars 15

No. of top bars 15
Asprov. For bottom bars 1696.46
Asprov. For top bars 1696.46
ρprov for bottom bars 0.00819
ρprov for top bars 0.00819
Ratio in bottom bars 0.36878
Ratio in top Bars 0.41188
Judgement OK

Crack Control Check:

ROW D ROW E ROW F

TOP BOTTOM TOP BOTTOM TOP BOTTOM
Mservice 0.73102561 0.598456199 6.514839636 5.302776448 1.462051221 1.196912398
k 0.317215868 0.317215868 0.317215868 0.317215868 0.317215868 0.317215868
fs 28.05029547 22.96345432 108.3254934 88.17191321 56.10059093 45.92690864
Crack Spacing 2975 3650 775 950 1475 1825
Judgement OK OK OK OK OK OK

15-12 dia. @ 15-12 dia. @

200mm. o.c. 200mm. o.c.

15-12 dia. @ Lb
200mm. o.c.
15-12 dia. @
200mm. o.c.
  

G. ROOF FRAMING DESIGN

 
 
 Compression Axial Capacity Of Double Angle-Section (Built-Up)
Section: L2x2x1/8 Connection: Welded
Orientation: SHORT LEGS BACK TO BACK

1. Member Property 2. Material Property

Lx = 2.8 m Kx = 1 Fy = 248 MPa
Ly = 2.8 m Ky = 1 Fu = 400 MPa
Lz = 2.8 m Kz = 1 E = 200,000 MPa
G = 77,200 MPa
3. Section Property
Ag = 316.77356 mm2 rxx = 15.759 mm
d = 50.8 mm ryy = 22.862 mm
b = 50.8 mm rz = 9.9314 mm
3 4 3 4
Ix = 78.66773944 x 10 mm Iy = 78.668 x 10 mm
S = 6 mm (spacing) x = 13.564 mm
3 4
Ixx = 157.3354789 x 10 mm y = 13.564 mm
3 4
Iyy = 331.1509337 x 10 mm a = 0.5 m (int. connectors distance)
rx = 15.748 mm t = 3.175 mm
ry = 15.748 mm
4. Slenderness Calculation
(KL/r)x = 177.68 Governs
(KL/r)y = 122.47
a/ri = 50.35
3/4(KL/r)max = 133.26 OK
5. Critical Elastic Buckling Stress (Fe) for Flexural Buckling
Fe = 62.53 Mpa (eq. 505.4-9)
6. Critical Elastic Buckling Stress (Fe) for Torsional Buckling
h = 33.1272 mm
rib = 15.748 mm
α = 1.052
Modified Slenderness Ratio about Y-Axis (KL/r) m
(KL/r)m = 124.23 (eq. 505.6-1,eq. 505.6-2)
Warping Constant (Cw)
Cw = Negligible mm6
Torsional Constant (J)
4
J = 1207.071134 mm
xo = 0
yo = 11.9761
ro = 30.240057 (eq. 505.4-7)

Fey = 127.90 (eq. 505.4-10)

Fez = 321.68887
H = 0.8431568
Fe = 117.33314 MPa (eq. 505.4-11)
7. Classification of Section (The angle has slender element)
b/t = 16.00 (Table 502.4.1) ʎr = 12.78 (Table 502.4.1)
8. Determination of Q
Determination of Qs (Sec. 505.7.1)
b/t = 16.00
 0.45(E/Fy)1/2 = 12.78
1/2
0.91(E/Fy) = 25.84
Qs = 0.91 (eq. 505.7-10, eq. 505.7-11, eq. 505.7-12)
Determination of Qa (Sec. 505.7.2)
Qa = 1.00 (eq. 505.7-16) (No Stiffened Element)
Q = 0.91 (sec. 505.7-User Note)
9. Critical Stress (Fcr)
Qfy/2.25 = 100.50
Fcr = 54.84 Mpa (eq. 505.3-2 or eq. 505.3-3)
10. Nominal Compressive Strength (Pn)
Pn = 34.74 kN. (eq. 505.4-1)
11. Ultimate Compressive Strength (Pu)
Pu = 31.27 kN. (sec. 505.1)
DESIGN OF LC PURLINS
PROJECT : PROPOSED 2-STOREY RESIDENCE WITH DECK
DATE : January 12, 2020
TITLE :
GEOMETRY L= 3.00 m. Span
= 10.00 o Roof Slope Angle
S= 0.60 m. Spacing of Purlin WIND DEAD & LIVE
n= 2 line(s) No. of lines of Sag Rods
LOADS
DEAD LOAD P DL = 563 Pa. Total Dead Load
Roof Sheet & Insulation 500 Pa. Breakdown
Purlin (actual weight) 63 Pa. Actual Wt. of Purlin+Sagrod. WN
LIVE LOAD P LL = 500 Pa. Total Live Load

WIND LOAD WT
P w Suction = -1200 Pa. 
P w Pressure = 1200 Pa.
NORMAL LOAD PER LINEAR METER
D.L. : PD S cos  ( 563 )( 0.6 ) cos10 = 332.67 N/m.
L.L. : PL S cos  =( 500 )( 0.6 ) cos10 = 295.44 N/m.
W.L.: P w Suction ( -1200 )( 0.6 ) = -720.00 N/m.
P w Pressure =( 1200 )( 0.6 ) = 720.00 N/m.
TANGENTIAL LOAD PER LINEAR METER
D.L. : PD S sin  =( 563 )( 0.6 ) cos10 = 58.66 N/m.
L.L. : PL S sin  = ( 500 )( 0.6 ) cos10 = 52.09 N/m.
BASIC LOAD WN WT
1. DL + LL 628.11 110.75
2. D + P 1,052.67 58.66
3. D + S -387.33 58.66
4. D + 0.75(L + P) 1,094.25 97.73 ««« GOVERNS !
5. D + 0.75(L + S) 14.25 97.73

ALTERNATE LOAD WN WT
6. D + L + P 1,348.11 110.75 ««« GOVERNS !
7. D + L + S -91.89 110.75

TRIAL SECTION: LC 100x50x15x2.0 W= 3.35 kg/m. H= 100

A= 427 mm2. SX = 13.5 x 103 mm3. B= 50
IX = 675 x 103 mm4. SY = 4.4072948 x 103 mm3. c= 15
IY = 145 x 103 mm4. Xc = 17.10 mm. t= 2.0
d= 100 mm.
Material Strength : Fy = 248 MPa
Allowable Bending :
82740 Cb l= 1000 mm Af = 100 mm2
Fbx = - for Suction
(lH / Af) d= 100 mm Cb = 1.75 (Single Curvature Bending)
= 144.80 Mpa
Fbx = 0.6 Fy - for Pressure @ Midspan Mn = 0.1250 Wn L²
= 148.80 Mpa
f bx = M X / S X Mt = 0.0250 Wt(L/3)²
Fby = 0.6 Fy @ Sagrod Mn = 0.1111 Wn L²
= 148.80 Mpa
f by = M Y / S Y Mt = 0.1000 Wt(L/3)²

Stress Ratio, SR = fb x / Fb x + fb y / Fb y ≤ 1.0

Bending Moments Actual Stress Allowable Stress Ratio

Location Normal Tangential Normal Tangential Normal Tangential Combined Remarks
Fbx Fby
Load Combinations Mx My fbx fby fbx / Fbx fby / Fby SR
@ Midspan
1. DL + LL 706.62 2.77 52.34 0.63 148.80 148.80 0.352 0.004 0.356 O.K !
2. D + P 1184.25 1.47 87.72 0.33 148.80 148.80 0.590 0.002 0.592 O.K !
3. D + S -435.75 1.47 32.28 0.33 144.80 148.80 0.223 0.002 0.225 O.K !
4. D + 0.75(L + P) 1231.03 2.44 91.19 0.55 148.80 148.80 0.613 0.004 0.617 O.K !
5. D + 0.75(L + S) 16.03 2.44 1.19 0.55 148.80 148.80 0.008 0.004 0.012 O.K !
6. D + L + P 1516.62 2.77 112.34 0.63 148.80 197.90 0.755 0.003 0.758 O.K !
7. D + L + S -103.38 2.77 7.66 0.63 144.80 197.90 0.053 0.003 0.056 O.K !
@ Sagrod
1. DL + LL 628.05 11.08 46.52 2.51 148.80 148.80 0.313 0.017 0.330 O.K !
2. D + P 1052.56 5.87 77.97 1.33 148.80 148.80 0.524 0.009 0.533 O.K !
3. D + S -387.29 5.87 28.69 1.33 144.80 148.80 0.198 0.009 0.207 O.K !
4. D + 0.75(L + P) 1094.14 9.77 81.05 2.22 148.80 148.80 0.545 0.015 0.560 O.K !
5. D + 0.75(L + S) 14.25 9.77 1.06 2.22 148.80 148.80 0.007 0.015 0.022 O.K !
6. D + L + P 1347.98 11.08 99.85 2.51 148.80 148.80 0.671 0.017 0.688 O.K !
7. D + L + S -91.88 11.08 6.81 2.51 144.80 148.80 0.047 0.017 0.064 O.K !
ok
DEFLECTION BENDING 0.758
Deflection 0.513
WN1 = 1094.25 kN-m ( Due to Basic Load Combination )
  ACTUAL = 5 W N L 4 / 384 E I X   ALLOW = L / 180 O.K !
= 5 (1.09425)(3000)^4 / 384 ( 200000 ) ( 675000) = 16.67 mm.
= 8.55 mm.
WN1 = 1348.11 kN-m ( Due to Alternate Load Combination )
  ACTUAL = 5 W N L 4 / 384 E I X   ALLOW = ( L / 180 ) x 1.33 O.K !
= 5 (1.34811)(3000)^4 / 384 ( 200000 ) ( 675000) = 22.17 mm.
= 10.53 mm.
TRIAL SECTION IS ADEQUATE ADOPT TRIAL SECTION
  

H. BEAM DESIGN

 
 
 Beam Number: 2B1 Date: 14/01/2020 16:12
Project Name: Proposed 2-Storey Residence Engineer: KARIZA A. AVELINO

Material Properties:
fc' = 21 Mpa. fyt = 276 Mpa dby = 10 mm. dbt = 10 mm.
fy = 414 Mpa. db = 16 mm. cc = 40 mm.
General Geometry:
b = 200 mm. Number of ties (Vertical) = 2 legs
h = 400 mm. Number of ties (horizontal) = 2 legs
Result: PASSED
MEMBER CAPACITY CALCULATION DESIGN FORCES
END SPAN MIDDLE SPAN Fz (kN) My(-) (kN*m) My(+) (kN*m)
Mu = -3.66 kN-m -9.50 kN-m END 23.1431 11.7926 9.522
Tu = 0.00 kN-m 0.00 kN-m MID 24.3652 5.3853 9.4973
Vu = 32.56 kN 24.37 kN END 32.5573 20.5936 3.6599
Layer 1 2 pcs. Layer 1 2 pcs.
Top Bars:
Layer 2 0 pcs. Layer 2 0 pcs.
Layer 1 2 pcs. Layer 1 2 pcs. 2-16mm 2-16mm
Bottom Bars:
Layer 2 0 pcs. Layer 2 0 pcs.
d= 342.00 d' = 58.00 d = 342.00 d' = 58.00
Ru = 0.173837914 0.451102713
ρ = 0.000421963 0.001103748 B1
Asreq = 28.86228003 75.496349
ρmin = 0.000561211 0.001467985
200 x 400
Asmin = 38.38683244 100.4101442
ẞ1 = 0.85 0.85
ρbal = 0.021685533 0.021685533
Asbal = 1483.290455 1483.290455
Type = Singly Reinforced Singly Reinforced
a(theo) = - -
c(theo) = - - 2-16mm 2-16mm
As' = - -
ɛy = - -
End Mid
ɛs'= - -
Judgement = - -
c = - - 1‐10mm. @ 50 mm. , 11 @ 75 mm. o.c. Rest @ 150 mm. o.c.
a = - -
fs = - -
Asprovided = 402.1238597 402.1238597
torsion bar = 0 pcs. 0 pcs. CAPACITY SUMMARY
Stirrups = No Unir: kN-m END SPAN MID SPAN
Tulimit = 1.521415131 1.521415131 TOP 47.749 47.749
Remarks: Neglect Torsion Neglect Torsion BOTTOM 47.749 47.749
Additional As = 0 0
total As req = 38.38683244 100.4101442
Judement = OK OK Programmed By:
ρbal = 0.021685533 0.021685533
ρ = 0.005879004 0.005879004
JUNE-JUNE P. SANTOS, MSCE
a = 46.63285095 46.63285095
Mu = 47.74879023 47.74879023
* In accordance with the latest
Judgement = OK OK
NSCP Code conforming to SMRF
Vu = 23.1431 0 seismic provision
Vc = 52.24136292 53.28619018
Vs = - -
Section is ADEQUATE
Spacing: 1-10mm. @ 50 mm. , 11 @ 75 mm. o.c. Rest @ 150 mm. o.c.

LEGENDS:

db = Longitudinal Bar Diameter fc' = Concrete Strength at 28 days

dby = Stirrups Diameter fy = Yield Strength of Longitudinal Bars
dbt = Torsional Bar Diameter fyt = Yield Strength of Stirrups
cc = Concrete Cover
 Beam Number: 2B2 Date: 14/01/2020 16:13
Project Name: Proposed 2-Storey Residence Engineer: KARIZA A. AVELINO

Material Properties:
fc' = 21 Mpa. fyt = 276 Mpa dby = 10 mm. dbt = 10 mm.
fy = 414 Mpa. db = 16 mm. cc = 40 mm.
General Geometry:
b = 200 mm. Number of ties (Vertical) = 2 legs
h = 400 mm. Number of ties (horizontal) = 2 legs
Result: PASSED
MEMBER CAPACITY CALCULATION DESIGN FORCES
END SPAN MIDDLE SPAN Fz (kN) My(-) (kN*m) My(+) (kN*m)
Mu = 0.00 kN-m -27.10 kN-m END 27.6693 15.928 14.4066
Tu = 0.00 kN-m 0.00 kN-m MID 47.0556 6.3535 27.1006
Vu = 59.95 kN 47.06 kN END 59.9534 48.2446 0
Layer 1 3 pcs. Layer 1 2 pcs.
Top Bars:
Layer 2 0 pcs. Layer 2 0 pcs.
Bottom Bars:
Layer 1 2 pcs. Layer 1 2 pcs. 3-16mm 2-16mm
Layer 2 0 pcs. Layer 2 0 pcs.
d= 342.00 d' = 58.00 d = 342.00 d' = 58.00
Ru = 0 1.287224179
ρ = 0 0.003230242
2B2
Asreq = 0 220.9485416
ρmin = 0 0.003381643
Asmin = 0 231.3043478 200 x 400
ẞ1 = 0.85 0.85
ρbal = 0.021685533 0.021685533
Asbal = 1483.290455 1483.290455
Type = Singly Reinforced Singly Reinforced
a(theo) = - -
c(theo) = - -
2-16mm 2-16mm
As' = - -
ɛy = - -
ɛs'= - - End Mid
Judgement = - -
c = - - 1‐10mm. @ 50 mm. , 11 @ 75 mm. o.c. Rest @ 150 mm. o.c.
a = - -
fs = - -
Asprovided = 603.1857895 402.1238597
torsion bar = 0 pcs. 0 pcs. CAPACITY SUMMARY
Stirrups = No Unir: kN-m END SPAN MID SPAN
Tulimit = 1.521415131 1.521415131 TOP 69.003 69.003
Remarks: Neglect Torsion Neglect Torsion BOTTOM 47.749 69.003
Additional As = 0 0
total As req = 0 231.3043478
Judement = OK OK Programmed By:
ρbal = 0.021685533 0.021685533
ρ = 0.008818506 0.005879004
JUNE-JUNE P. SANTOS, MSCE
a = 69.94927643 46.63285095
Mu = 69.00303671 47.74879023
* In accordance with the latest
Judgement = OK OK
NSCP Code conforming to SMRF
Vu = 27.6693 0 seismic provision
Vc = 52.24136292 53.28619018
Vs = - -
Section is ADEQUATE
Spacing: 1-10mm. @ 50 mm. , 11 @ 75 mm. o.c. Rest @ 150 mm. o.c.

LEGENDS:

db = Longitudinal Bar Diameter fc' = Concrete Strength at 28 days

dby = Stirrups Diameter fy = Yield Strength of Longitudinal Bars
dbt = Torsional Bar Diameter fyt = Yield Strength of Stirrups
cc = Concrete Cover
 Beam Number: 2B3 Date: 14/01/2020 16:16
Project Name: Proposed 2-Storey Residence Engineer: KARIZA A. AVELINO

Material Properties:
fc' = 21 Mpa. fyt = 276 Mpa dby = 10 mm. dbt = 10 mm.
fy = 414 Mpa. db = 16 mm. cc = 40 mm.
General Geometry:
b = 200 mm. Number of ties (Vertical) = 2 legs
h = 400 mm. Number of ties (horizontal) = 2 legs
Result: PASSED
MEMBER CAPACITY CALCULATION DESIGN FORCES
END SPAN MIDDLE SPAN Fz (kN) My(-) (kN*m) My(+) (kN*m)
Mu = -19.95 kN-m 0.00 kN-m END 83.5839 91.8758 0
Tu = 0.00 kN-m 0.00 kN-m MID 79.5905 61.8658 0
Vu = 71.58 kN 79.59 kN END 71.5824 6.2837 19.954
Layer 1 3 pcs. Layer 1 3 pcs.
Top Bars:
Layer 2 2 pcs. Layer 2 2 pcs.
Layer 1 2 pcs. Layer 1 2 pcs. 5-16mm 5-16mm
Bottom Bars:
Layer 2 0 pcs. Layer 2 0 pcs.
d= 342.00 d' = 74.40 d = 325.60 d' = 58.00
Ru = 0.947775004 0
ρ = 0.002353548 0
Asreq = 160.9826519 0 2B3
ρmin = 0.003130218 0
Asmin = 214.106927 0 200 x 400
ẞ1 = 0.85 0.85
ρbal = 0.021685533 0.021685533
Asbal = 1483.290455 1412.161907
Type = Singly Reinforced Singly Reinforced
a(theo) = - -
c(theo) = - -
As' = - -
2-16mm 2-16mm
ɛy = - -
ɛs'= - - End Mid
Judgement = - -
c = - - 1‐10mm. @ 50 mm. , 11 @ 75 mm. o.c. Rest @ 150 mm. o.c.
a = - -
fs = - -
Asprovided = 402.1238597 1005.309649
torsion bar = 0 pcs. 0 pcs. CAPACITY SUMMARY
Stirrups = No Unir: kN-m END SPAN MID SPAN
Tulimit = 1.521415131 1.521415131 TOP 100.128 47.749
Remarks: Neglect Torsion Neglect Torsion BOTTOM 47.749 69.003
Additional As = 0 0
total As req = 214.106927 0
Judement = OK OK Programmed By:
ρbal = 0.021685533 0.021685533
ρ = 0.005879004 0.015437802
JUNE-JUNE P. SANTOS, MSCE
a = 46.63285095 116.5821274
Mu = 47.74879023 100.1281471
* In accordance with the latest
Judgement = OK OK
NSCP Code conforming to SMRF
Vu = 83.5839 0 seismic provision
Vc = 52.24136292 50.73094597
Vs = 59.20383708 -
Section is ADEQUATE
Spacing: 1-10mm. @ 50 mm. , 11 @ 75 mm. o.c. Rest @ 150 mm. o.c.

LEGENDS:

db = Longitudinal Bar Diameter fc' = Concrete Strength at 28 days

dby = Stirrups Diameter fy = Yield Strength of Longitudinal Bars
dbt = Torsional Bar Diameter fyt = Yield Strength of Stirrups
cc = Concrete Cover
 Beam Number: 2B4 Date: 14/01/2020 16:17
Project Name: Proposed 2-Storey Residence Engineer: KARIZA A. AVELINO

Material Properties:
fc' = 21 Mpa. fyt = 276 Mpa dby = 10 mm. dbt = 10 mm.
fy = 414 Mpa. db = 16 mm. cc = 40 mm.
General Geometry:
b = 200 mm. Number of ties (Vertical) = 2 legs
h = 400 mm. Number of ties (horizontal) = 2 legs
Result: PASSED
MEMBER CAPACITY CALCULATION DESIGN FORCES
END SPAN MIDDLE SPAN Fz (kN) My(-) (kN*m) My(+) (kN*m)
Mu = -27.16 kN-m -53.09 kN-m END 72.2433 65.0786 19.294
Tu = 0.00 kN-m 0.00 kN-m MID 44.3606 0 53.0917
Vu = 100.85 kN 44.36 kN END 100.8476 67.4688 27.1587
Layer 1 3 pcs. Layer 1 2 pcs.
Top Bars:
Layer 2 0 pcs. Layer 2 0 pcs.
Bottom Bars:
Layer 1 2 pcs. Layer 1 3 pcs. 3-16mm 2-16mm
Layer 2 0 pcs. Layer 2 0 pcs.
d= 342.00 d' = 58.00 d = 342.00 d' = 58.00
Ru = 1.289983813 2.521749332
ρ = 0.003237448 0.006595669
2B4
Asreq = 221.441451 451.1437425
ρmin = 0.003381643 0.003381643
Asmin = 231.3043478 231.3043478 200 x 400
ẞ1 = 0.85 0.85
ρbal = 0.021685533 0.021685533
Asbal = 1483.290455 1483.290455
Type = Singly Reinforced Singly Reinforced
a(theo) = - -
c(theo) = - - 2-16mm 3-16mm
As' = - -
ɛy = - -
ɛs'= - - End Mid
Judgement = - -
c = - - 1‐10mm. @ 50 mm. , 11 @ 75 mm. o.c. Rest @ 150 mm. o.c.
a = - -
fs = - -
Asprovided = 402.1238597 603.1857895
torsion bar = 0 pcs. 0 pcs. CAPACITY SUMMARY
Stirrups = No Unir: kN-m END SPAN MID SPAN
Tulimit = 1.521415131 1.521415131 TOP 69.003 47.749
Remarks: Neglect Torsion Neglect Torsion BOTTOM 47.749 47.749
Additional As = 0 0
total As req = 231.3043478 451.1437425
Judement = OK OK Programmed By:
ρbal = 0.021685533 0.021685533
ρ = 0.005879004 0.008818506
JUNE-JUNE P. SANTOS, MSCE
a = 46.63285095 69.94927643
Mu = 47.74879023 69.00303671
* In accordance with the latest
Judgement = OK OK
NSCP Code conforming to SMRF
Vu = 72.2433 0 seismic provision
Vc = 52.24136292 53.28619018
Vs = 44.08303708 -
Section is ADEQUATE
Spacing: 1-10mm. @ 50 mm. , 11 @ 75 mm. o.c. Rest @ 150 mm. o.c.

LEGENDS:

db = Longitudinal Bar Diameter fc' = Concrete Strength at 28 days

dby = Stirrups Diameter fy = Yield Strength of Longitudinal Bars
dbt = Torsional Bar Diameter fyt = Yield Strength of Stirrups
cc = Concrete Cover
 Beam Number: RB Date: 14/01/2020 16:18
Project Name: Proposed 2-Storey Residence Engineer: KARIZA A. AVELINO

Material Properties:
fc' = 21 Mpa. fyt = 276 Mpa dby = 10 mm. dbt = 10 mm.
fy = 414 Mpa. db = 16 mm. cc = 40 mm.
General Geometry:
b = 200 mm. Number of ties (Vertical) = 2 legs
h = 350 mm. Number of ties (horizontal) = 2 legs
Result: PASSED
MEMBER CAPACITY CALCULATION DESIGN FORCES
END SPAN MIDDLE SPAN Fz (kN) My(-) (kN*m) My(+) (kN*m)
Mu = -4.97 kN-m -3.52 kN-m END 8.403 7.4692 5.3189
Tu = 0.00 kN-m 0.00 kN-m MID 7.9613 4.0744 3.516
Vu = 9.72 kN 7.96 kN END 9.7188 9.9545 4.9663
Layer 1 2 pcs. Layer 1 2 pcs.
Top Bars:
Layer 2 0 pcs. Layer 2 0 pcs.
Layer 1 2 pcs. Layer 1 2 pcs. 2-16mm 2-16mm
Bottom Bars:
Layer 2 0 pcs. Layer 2 0 pcs.
d= 292.00 d' = 58.00 d = 292.00 d' = 58.00
Ru = 0.32358974 0.229092388
ρ = 0.000788834 0.000556961
RB
Asreq = 46.06789621 32.52649854
ρmin = 0.001049149 0.000740758
Asmin = 61.27030196 43.26024306 200 x 350
ẞ1 = 0.85 0.85
ρbal = 0.021685533 0.021685533
Asbal = 1266.435126 1266.435126
Type = Singly Reinforced Singly Reinforced
a(theo) = - -
c(theo) = - - 2-16mm 2-16mm
As' = - -
ɛy = - -
ɛs'= - - End Mid
Judgement = - -
c = - - 1‐10mm. @ 50 mm. , 14 @ 50 mm. o.c. Rest @ 125 mm. o.c.
a = - -
fs = - -
Asprovided = 402.1238597 402.1238597
torsion bar = 0 pcs. 0 pcs. CAPACITY SUMMARY
Stirrups = No Unir: kN-m END SPAN MID SPAN
Tulimit = 1.27072741 1.27072741 TOP 40.257 40.257
Remarks: Neglect Torsion Neglect Torsion BOTTOM 40.257 40.257
Additional As = 0 0
total As req = 61.27030196 43.26024306
Judement = OK OK Programmed By:
ρbal = 0.021685533 0.021685533
ρ = 0.006885683 0.006885683
JUNE-JUNE P. SANTOS, MSCE
a = 46.63285095 46.63285095
Mu = 40.25722272 40.25722272
* In accordance with the latest
Judgement = OK OK
NSCP Code conforming to SMRF
Vu = 8.403 0 seismic provision
Vc = 44.60373676 45.4958115
Vs = - -
Section is ADEQUATE
Spacing: 1-10mm. @ 50 mm. , 14 @ 50 mm. o.c. Rest @ 300 mm. o.c.

LEGENDS:

db = Longitudinal Bar Diameter fc' = Concrete Strength at 28 days

dby = Stirrups Diameter fy = Yield Strength of Longitudinal Bars
dbt = Torsional Bar Diameter fyt = Yield Strength of Stirrups
cc = Concrete Cover
  

I. COLUMN DESIGN

 
 
Column Number: C1 Date: January 14, 2020
Project Name: Proposed 2-Storey Residence Designed by: KAA

I. Design Parameters Judgement: SAFE

Cross Section Properties
B = 200 mm. H = 400 mm. cc = 40 mm. fyt = 276.00 Mpa.

Materials Strength

fc'= 21.00 Mpa. fy = 414.00 Mpa. Es = 200 Gpa.

Rebar Arrangement
db = D16
Z-axis

Number of bars along Z-axis: 2

Number of bars along Y-axis: 3
Total number of Bars: 6
Y-axis
Shear Capacity (Design of Lateral Ties) Cross Section :
modification factor (λ) = 1.00
number of legs (Y) = 2.00
number of legs (Z) = 3.00
dby = D10 Spacing = 200 mm. (for lateral ties)
Design Loads:
Pu = 103.69 kN Muy = 1.77 kN.m. Muz = 23.42 kN.m.
Vuy = 4.43 kN Vuz = 6.27 kN
Calculation Summary

Min.S Max S. Note: Column Splice Shall be Located midheight

Bar Spacing Check:
41.00 285.51 of Column with lap length equal to 840 mm.
Sactual(y) = 84.00 OK OK with Lateral Ties spaced not more than 150
Sactual(yz) = ##### OK OK mm.

ß1 = 0.85
Balanced Condition: Due to My: Du to Mz:
cby = 84.02 mm. c = 65.58 mm. c = 447.48 mm.
Pby= 361.54 kN Pny= 179.31 kN Pnz= 1524.72 kN
ebz= 131.46 mm. ez= 225.87 mm. ey= 17.07 mm.
cbz = 202.37 mm.

Section Capacities: Check Spacing for Crack Control:

Pn = 177.78 kN Sminz = 1716.64 mm OK
Pcz = 138.31 kN OK Sminy = 572.215 mm OK
Pcy = 1372.25 kN OK
Mcz = 31.24 kN-m OK LATERAL TIES
Mcy = 23.42 kN-m OK 1 @ 50 from face of support
Vuycap = 70.07 kN OK Provide 9 @ 50 mm. o.c.
Vuyzcap = 170.73 kN OK Rest @ 200 mm. o.c.

Load Case/Combo Mark P Vy Vz T My Mz Remarks

kN kN kN kN-m kN-m kN-m
cLCB2 Pmax 194.31 -2.57 -12.33 0.12 -14.62 -2.09 SAFE
cLCB4 Pmin -7.34 -0.57 -1.93 -0.16 24.23 3.49 SAFE
cLCB5 Vzmax 99.44 14.7 0.59 0.32 -0.1 16.27 SAFE
cLCB21 Vzmin 85.74 -12.01 -4.73 -0.08 -11.58 -14.8 SAFE
cLCB38 Vymax 62.27 -2.67 20.12 0.3 27.01 -2.24 SAFE
cLCB21 Vymin 101.86 -7.83 -35.36 -0.08 -46.66 -7.63 SAFE
cLCB8 Tmax 15.01 0.03 1.21 4.67 0.04 0.11 SAFE
cLCB20 Tmin 34.22 -10.71 -6.48 -4.72 -8.88 -16.5 SAFE
cLCB4 Mymax 86.33 -5.14 12.51 0.73 48.81 13.52 SAFE
cLCB21 Mymin 101.86 -7.83 -35.36 -0.08 -46.66 -7.63 SAFE
cLCB4 Mzmax 42.11 1.65 9.38 0.73 1.2 17.62 SAFE
cLCB20 Mzmin 103.69 4.43 -6.27 -0.49 -1.77 -23.42 SAFE
 Interaction Diagram in Y‐Direction
1400

1200

1000
Ultimate Axial capacity

800

600

400

200

0
‐5 0 5 10 15 20 25 30 35 40
Ultimate Moment Capacity

Y‐Interaction Actual Y Stress

Interaction Diagram in Z‐Direction
1600

1400

1200

1000
Ultimate Axial capacity

800

600

400

200

0
‐20 0 20 40 60 80 100 120
‐200

‐400
Ultimate Moment Capacity

Z‐Interaction Actual Z Stress

Reinforced Concrete Column Design V.9 Programmed by: JPS Engg.

Column Number: C2 Date: January 14, 2020
Project Name: Proposed 2-Storey Residence Designed by: KAA

I. Design Parameters Judgement: SAFE

Cross Section Properties
B = 250 mm. H = 400 mm. cc = 40 mm. fyt = 276.00 Mpa.

Materials Strength

fc'= 21.00 Mpa. fy = 414.00 Mpa. Es = 200 Gpa.

Rebar Arrangement
db = D16
Z-axis

Number of bars along Z-axis: 2

Number of bars along Y-axis: 4
Total number of Bars: 8
Y-axis
Shear Capacity (Design of Lateral Ties) Cross Section :
modification factor (λ) = 1.00
number of legs (Y) = 2.00
number of legs (Z) = 3.00
dby = D10 Spacing = 200 mm. (for lateral ties)
Design Loads:
Pu = 146.74 kN Muy = 1.23 kN.m. Muz = 47.89 kN.m.
Vuy = 14.19 kN Vuz = 6.07 kN
Calculation Summary

Min.S Max S. Note: Column Splice Shall be Located midheight

Bar Spacing Check:
41.00 285.51 of Column with lap length equal to 840 mm.
Sactual(y) = ##### OK OK with Lateral Ties spaced not more than 150
Sactual(yz) = 94.67 OK OK mm.

ß1 = 0.85
Balanced Condition: Due to My: Du to Mz:
cby = 113.61 mm. c = 75.06 mm. c = 467.74 mm.
Pby= 578.38 kN Pny= 217.87 kN Pnz= 1937.76 kN
ebz= 155.72 mm. ez= 326.36 mm. ey= 8.38 mm.
cbz = 202.37 mm.

Section Capacities: Check Spacing for Crack Control:

Pn = 216.50 kN Sminz = 1373.31 mm OK
Pcz = 189.44 kN OK Sminy = 572.215 mm OK
Pcy = 1743.99 kN OK
Mcz = 61.83 kN-m OK LATERAL TIES
Mcy = 14.62 kN-m OK 1 @ 50 from face of support
Vuycap = 101.22 kN OK Provide 9 @ 50 mm. o.c.
Vuyzcap = 171.71 kN OK Rest @ 200 mm. o.c.

Load Case/Combo Mark P Vy Vz T My Mz Remarks

kN kN kN kN-m kN-m kN-m
cLCB2 Pmax 275.08 -13.69 7.27 0.21 4.8 -14.53 SAFE
cLCB46 Pmin 4.78 9.3 -1.58 0.72 3.58 1.93 SAFE
cLCB4 Vzmax 136.13 30.61 0.98 1.27 1.46 34.78 SAFE
cLCB20 Vzmin 255.14 -27.42 5.26 -0.85 0.79 -33.1 SAFE
cLCB9 Vymax 247.58 -7.28 18.43 1.27 21.92 -6.28 SAFE
cLCB24 Vymin 150.73 18.13 -14.38 -1.41 -19.6 15.43 SAFE
cLCB8 Tmax 18.64 10.83 -1.53 2.62 -2.98 18.96 SAFE
cLCB57 Tmin 19.25 3.79 -3.4 -2.53 -4.23 8.43 SAFE
cLCB9 Mymax 247.58 -7.28 18.43 1.27 21.92 -6.28 SAFE
cLCB24 Mymin 246.17 -18.9 -0.95 -1.41 -27.39 13.38 SAFE
cLCB5 Mzmax 238.54 0.85 12.51 0.56 -11.82 40.94 SAFE
cLCB21 Mzmin 146.74 14.19 -6.07 -0.15 -1.23 -47.89 SAFE
 Interaction Diagram in Y‐Direction
1800

1600

1400

1200
Ultimate Axial capacity

1000

800

600

400

200

0
‐10 0 10 20 30 40 50 60 70 80 90
‐200
Ultimate Moment Capacity

Y‐Interaction Actual Y Stress

Interaction Diagram in Z‐Direction
2000

1500
Ultimate Axial capacity

1000

500

0
‐20 0 20 40 60 80 100 120 140

‐500
Ultimate Moment Capacity

Z‐Interaction Actual Z Stress

Reinforced Concrete Column Design V.9 Programmed by: JPS Engg.

Column Number: PC1 Date: January 14, 2020
Project Name: Proposed 2-Storey Residence Designed by: KAA

I. Design Parameters Judgement: SAFE

Cross Section Properties
B = 200 mm. H = 400 mm. cc = 40 mm. fyt = 276.00 Mpa.

Materials Strength

fc'= 21.00 Mpa. fy = 414.00 Mpa. Es = 200 Gpa.

Rebar Arrangement
db = D16
Z-axis

Number of bars along Z-axis: 2

Number of bars along Y-axis: 2
Total number of Bars: 4
Y-axis
Shear Capacity (Design of Lateral Ties) Cross Section :
modification factor (λ) = 1.00
number of legs (Y) = 2.00
number of legs (Z) = 3.00
dby = D10 Spacing = 200 mm. (for lateral ties)
Design Loads:
Pu = 9.7 kN Muy = 5.60 kN.m. Muz = 5.29 kN.m.
Vuy = 1.63 kN Vuz = 1.03 kN
Calculation Summary

Min.S Max S. Note: Column Splice Shall be Located midheight

Bar Spacing Check:
41.00 285.51 of Column with lap length equal to 840 mm.
Sactual(y) = 84.00 OK OK with Lateral Ties spaced not more than 150
Sactual(yz) = ##### OK OK mm.

ß1 = 0.85
Balanced Condition: Due to My: Du to Mz:
cby = 84.02 mm. c = 45.95 mm. c = 77.49 mm.
Pby= 411.01 kN Pny= 49.11 kN Pnz= 122.15 kN
ebz= 103.68 mm. ez= 545.36 mm. ey= 577.32 mm.
cbz = 202.37 mm.

Section Capacities: Check Spacing for Crack Control:

Pn = 40.70 kN Sminz = 1716.64 mm OK
Pcz = 31.92 kN OK Sminy = 572.215 mm OK
Pcy = 79.40 kN OK
Mcz = 17.41 kN-m OK LATERAL TIES
Mcy = 45.84 kN-m OK 1 @ 50 from face of support
Vuycap = 68.68 kN OK Provide 9 @ 50 mm. o.c.
Vuyzcap = 164.02 kN OK Rest @ 200 mm. o.c.

Load Case/Combo Mark P Vy Vz T My Mz Remarks

kN kN kN kN-m kN-m kN-m
cLCB21 Pmax 49.52 -14.48 -1.37 0 0 0 SAFE
cLCB38 Pmin -9.61 17.03 3.58 0 0.08 1.11 SAFE
cLCB4 Vzmax 0.22 24.18 3.9 0 0 0 SAFE
cLCB53 Vzmin 40.45 -21.63 -1.69 0 0 0 SAFE
cLCB5 Vymax -3.26 17.75 4.21 0 0 0 SAFE
cLCB20 Vymin 6.06 -1.17 -10.11 -2.48 0 0 SAFE
cLCB8 Tmax 5.27 1.84 2.89 4.63 0 0 SAFE
cLCB24 Tmin 6.05 -1.19 -8.41 -3.56 0 0 SAFE
cLCB5 Mymax -6.23 -0.58 -2.9 -0.82 26.79 3.51 SAFE
cLCB21 Mymin 9.98 -0.67 -1.33 2.31 -10.64 -1.89 SAFE
cLCB41 Mzmax -2.86 1.61 2.74 3.59 1.08 5.35 SAFE
cLCB24 Mzmin 9.7 -1.63 -1.03 1.75 -5.6 -5.29 SAFE
 Interaction Diagram in Y‐Direction
1000

900

800
Ultimate Axial capacity

700

600

500

400

300

200

100

0
‐5 0 5 10 15 20 25 30
Ultimate Moment Capacity

Y‐Interaction Actual Y Stress

Interaction Diagram in Z‐Direction
1000

800
Ultimate Axial capacity

600

400

200

0
‐10 0 10 20 30 40 50 60 70 80

‐200
Ultimate Moment Capacity

Z‐Interaction Actual Z Stress

Reinforced Concrete Column Design V.9 Programmed by: JPS Engg.

Column Number: PC2 Date: January 14, 2020
Project Name: Proposed 2-Storey Residence Designed by: KAA

I. Design Parameters Judgement: SAFE

Cross Section Properties
B = 200 mm. H = 200 mm. cc = 40 mm. fyt = 276.00 Mpa.

Materials Strength

fc'= 21.00 Mpa. fy = 414.00 Mpa. Es = 200 Gpa.

Rebar Arrangement
db = D16
Z-axis
Number of bars along Z-axis: 2
Number of bars along Y-axis: 2
Total number of Bars: 4

Shear Capacity (Design of Lateral Ties) Cross Section : Y-axis

modification factor (λ) = 1.00
number of legs (Y) = 2.00
number of legs (Z) = 3.00
dby = D10 Spacing = 200 mm. (for lateral ties)
Design Loads:
Pu = 20.66 kN Muy = 0.91 kN.m. Muz = 7.85 kN.m.
Vuy = 1.14 kN Vuz = 1.28 kN
Calculation Summary

Min.S Max S. Note: Column Splice Shall be Located midheight

Bar Spacing Check:
41.00 285.51 of Column with lap length equal to 840 mm.
Sactual(y) = 84.00 OK OK with Lateral Ties spaced not more than 150
Sactual(yz) = 84.00 OK OK mm.

ß1 = 0.85
Balanced Condition: Due to My: Du to Mz:
cby = 84.02 mm. c = 66.52 mm. c = 135.66 mm.
Pby= 156.04 kN Pny= 59.14 kN Pnz= 531.35 kN
ebz= 168.04 mm. ez= 379.96 mm. ey= 44.05 mm.
cbz = 84.02 mm.

Section Capacities: Check Spacing for Crack Control:

Pn = 57.89 kN Sminz = 1716.64 mm OK
Pcz = 45.16 kN OK Sminy = 1144.43 mm OK
Pcy = 478.22 kN OK
Mcz = 17.16 kN-m OK LATERAL TIES
Mcy = 21.06 kN-m OK 1 @ 50 from face of support
Vuycap = 69.15 kN OK Provide 9 @ 50 mm. o.c.
Vuyzcap = 51.83 kN OK Rest @ 200 mm. o.c.

Load Case/Combo Mark P Vy Vz T My Mz Remarks

kN kN kN kN-m kN-m kN-m
cLCB3 Pmax 49.51 1.39 -0.32 -0.22 0 0 SAFE
cLCB37 Pmin 15.02 1.73 1.54 0.32 5.52 0.96 SAFE
cLCB8 Vzmax 21.93 2.96 0.34 0.31 0 0 SAFE
cLCB24 Vzmin 24.16 -1.15 -1.26 -0.72 0 0 SAFE
cLCB38 Vymax 17.73 1.69 1.56 -0.4 0 0 SAFE
cLCB21 Vymin 24.9 -0.12 -2.28 0.06 0 0 SAFE
cLCB41 Tmax 18.47 2.72 0.54 0.38 0 0 SAFE
cLCB24 Tmin 24.16 -1.15 -1.26 -0.72 0 0 SAFE
cLCB4 Mymax 17.64 1.97 1.35 0.25 6.04 0.32 SAFE
cLCB20 Mymin 21.67 -0.16 -2.26 -0.66 -3.61 -5.12 SAFE
cLCB41 Mzmax 15.92 2.72 0.54 0.38 2.88 3.65 SAFE
cLCB25 Mzmin 20.66 -1.14 -1.28 -0.03 -0.91 -7.85 SAFE
 Interaction Diagram in Y‐Direction
700

600

500
Ultimate Axial capacity

400

300

200

100

0
‐5 0 5 10 15 20 25
‐100
Ultimate Moment Capacity

Y‐Interaction Actual Y Stress

Interaction Diagram in Z‐Direction
800

700

600
Ultimate Axial capacity

500

400

300

200

100

0
‐5 0 5 10 15 20 25
‐100
Ultimate Moment Capacity

Z‐Interaction Actual Z Stress

Reinforced Concrete Column Design V.9 Programmed by: JPS Engg.

  

J. FOUNDATION DESIGN

 
 
 Footing Mark: F1 Date: January 14, 2020
Designed by: KAA
Project Name: PROPOSED 2-STOREY RESIDENTIAL HOUSE
Judgement : PASSED

hp
Lpz Lz
D

4 Pcs. Of 16 mm. bar

Lpx dia. Bothways
hf

Lx y

z x

Foundation Property Material Property

Lx = 700 mm. hf = 300 mm. fc' = 20.7 Mpa. ϒwater = 10 kN/m3
Lz = 700 mm. Df = 1200 mm. fy = 275 Mpa. μ = 0.5 (Soil to Concrete)
Lpx = 200 mm. hp = 900 mm. ϒsoil = 18 kN/m3 db = 16 mm
Lpz = 400 mm. cc = 75 mm. ϒconc. = 24 kN/m3

Net Soil Bearing Capacity

qall = 90 kPa. (Long Term) qall = 119.7 kPa. (Short Term)

Minimum Thickness: 300 mm Factor of Safety: Location of G.W.L.

Maximum Spacing: 300 mm Overturning = 1 3,000 mm.
Minimum Dimension: 700 mm Sliding = 1.5 Column Location
Buoyancy = 1.1 Corner

SERVICE LOAD COMBINATIONS

MY
LC LC Definition Force-X kN Force-Y kN Force-Z kN MX kNm MZ kNm qu (kPa) Soil Stress BUOY. OM Sliding
kNm

301 DL + 0.75LL + 0.75RLL + 0.45W+X 1.08 19.94 -0.37 0.00 0.00 0.00 40.70 0.34 1.10 1.00 1.50
302 DL + 0.75LL + 0.75RLL + 0.45W-X 1.08 19.94 -0.37 0.00 0.00 0.00 40.70 0.34 1.10 1.00 1.50
303 DL + 0.75LL + 0.75RLL + 0.45W+Z 1.08 19.94 -0.37 0.00 0.00 0.00 40.70 0.34 1.10 1.00 1.50
304 DL + 0.75LL + 0.75RLL + 0.45W-Z 1.08 19.94 -0.37 0.00 0.00 0.00 40.70 0.34 1.10 1.00 1.50
305 DL + 0.75LL + 0.75RLL + 0.54EQX -7.44 9.72 -0.96 0.00 0.00 0.00 19.83 0.17 1.10 1.00 1.50
306 DL + 0.75LL + 0.75RLL - 0.54EQX 10.50 31.07 1.13 0.00 0.00 0.00 63.41 0.53 1.10 1.00 1.50
307 DL + 0.75LL + 0.75RLL + 0.54EQZ 6.28 14.11 -1.42 0.00 0.00 0.00 28.80 0.24 1.10 1.00 1.50
308 DL + 0.75LL + 0.75RLL - 0.54EQZ -3.22 26.67 1.58 0.00 0.00 0.00 54.43 0.45 1.10 1.00 1.50
309 0.6DL + 0.6W+X 0.81 10.59 -0.24 0.00 0.00 0.00 21.62 0.18 1.10 1.00 1.50
310 0.6DL + 0.6W-X 0.81 10.59 -0.24 0.00 0.00 0.00 21.62 0.18 1.10 1.00 1.50
311 0.6DL + 0.6W+Z 0.81 10.59 -0.24 0.00 0.00 0.00 21.62 0.18 1.10 1.00 1.50
312 0.6DL + 0.6W-Z 0.81 10.59 -0.24 0.00 0.00 0.00 21.62 0.18 1.10 1.00 1.50
313 0.6DL + 0.7EQX -10.22 -2.65 -0.99 0.00 0.00 0.00 5.41 0.05 1.10 1.00 1.50
314 0.6DL - 0.7EQX 13.04 25.03 1.71 0.00 0.00 0.00 51.09 0.43 1.10 1.00 1.50
315 0.6DL + 0.7EQZ 7.57 3.05 -1.59 0.00 0.00 0.00 6.23 0.05 1.10 1.00 1.50
316 0.6DL - 0.7EQX -4.75 19.33 2.31 0.00 0.00 0.00 39.45 0.33 1.10 1.00 1.50
317 DL + LL + RLL 1.26 20.97 -0.09 0.00 0.00 0.00 42.80 0.48 1.10 1.00 1.50
318 DL + LL + 0.6W+X 1.24 18.23 0.07 0.00 0.00 0.00 37.20 0.31 1.10 1.00 1.50
319 DL + LL + 0.6W-X 1.24 18.23 0.07 0.00 0.00 0.00 37.20 0.31 1.10 1.00 1.50
320 DL + LL + 0.6W+Z 1.24 18.23 0.07 0.00 0.00 0.00 37.20 0.31 1.10 1.00 1.50
321 DL + LL + 0.6W-Z 1.24 18.23 0.07 0.00 0.00 0.00 37.20 0.31 1.10 1.00 1.50
322 DL + LL + 0.7EQX -9.79 4.98 -0.68 0.00 0.00 0.00 10.17 0.08 1.10 1.00 1.50
323 DL + LL - 0.7EQX 13.48 32.67 2.02 0.00 0.00 0.00 66.67 0.56 1.10 1.00 1.50
324 DL + LL + 0.7EQZ 8.00 10.69 -1.28 0.00 0.00 0.00 21.81 0.18 1.10 1.00 1.50
325 DL + LL - 0.7EQZ -4.31 26.97 2.62 0.00 0.00 0.00 55.03 0.46 1.10 1.00 1.50
 ULTIMATE LOADS

Moment-X Momen Moment-

LC LC Definition Force-X kN Force-Y kN Force-Z kN Muz Mux Vu
kNm t-Y kNm Z kNm

101 1.4DL 3.29 26.11 0.84 0.00 0.00 0.00 1.17 0.42 12.84
102 1.2DL + 1.6LL + 0.5RLL 1.72 23.73 0.45 0.00 0.00 0.00 1.06 0.38 11.67
103 1.2DL + 1.6RLL + 0.5LL 1.63 25.91 -0.46 0.00 0.00 0.00 1.16 0.42 12.74
104 1.2DL + 1.6RLL + 0.5W+X 1.38 25.32 -1.00 0.00 0.00 0.00 1.13 0.41 12.45
105 1.2DL + 1.6RLL + 0.5W-X 1.38 25.32 -1.00 0.00 0.00 0.00 1.13 0.41 12.45
106 1.2DL + 1.6RLL + 0.5W+Z 1.38 25.32 -1.00 0.00 0.00 0.00 1.13 0.41 12.45
107 1.2DL + 1.6RLL + 0.5W-Z 1.38 25.32 -1.00 0.00 0.00 0.00 1.13 0.41 12.45
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 1.27 22.54 -0.63 0.00 0.00 0.00 1.01 0.36 11.09
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 1.27 22.54 -0.63 0.00 0.00 0.00 1.01 0.36 11.09
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 1.27 22.54 -0.63 0.00 0.00 0.00 1.01 0.36 11.09
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 1.27 22.54 -0.63 0.00 0.00 0.00 1.01 0.36 11.09
112 1.2DL + 1.0EQX + 0.5LL -14.05 2.70 -1.18 0.00 0.00 0.00 0.12 0.04 1.33
113 1.2DL - 1.0EQX + 0.5LL 19.19 42.24 2.69 0.00 0.00 0.00 1.89 0.68 20.78
114 1.2DL + 1.0EQZ + 0.5LL 11.37 10.84 -2.03 0.00 0.00 0.00 0.48 0.17 5.33
115 1.2DL - 1.0EQX + 0.5LL -6.23 34.10 3.54 0.00 0.00 0.00 1.52 0.55 16.77
116 0.9DL + 1.0W+X 1.12 15.79 -0.46 0.00 0.00 0.00 0.70 0.25 7.76
117 0.9DL + 1.0W-X 1.12 15.79 -0.46 0.00 0.00 0.00 0.70 0.25 7.76
118 0.9DL + 1.0W+Z 1.12 15.79 -0.46 0.00 0.00 0.00 0.70 0.25 7.76
119 0.9DL + 1.0W-Z 1.12 15.79 -0.46 0.00 0.00 0.00 0.70 0.25 7.76
120 0.9DL + 1.0EQX -14.50 -2.99 -1.39 0.00 0.00 0.00 0.13 0.05 1.47
121 0.9DL - 1.0EQX 18.73 36.56 2.47 0.00 0.00 0.00 1.63 0.59 17.98
122 0.9DL + 1.0EQZ 10.91 5.16 -2.24 0.00 0.00 0.00 0.23 0.08 2.54
123 0.9DL - 1.0EQZ -6.68 28.42 3.32 0.00 0.00 0.00 1.27 0.46 13.98

LC LC Definition Force-Y kN Dowels n Dowels

101 1.4DL 26.11 Not Required -
102 1.2DL + 1.6LL + 0.5RLL 23.73 Not Required -
103 1.2DL + 1.6RLL + 0.5LL 25.91 Not Required -
104 1.2DL + 1.6RLL + 0.5W+X 25.32 Not Required -
105 1.2DL + 1.6RLL + 0.5W-X 25.32 Not Required - No Dowels Required

106 1.2DL + 1.6RLL + 0.5W+Z 25.32 Not Required -

107 1.2DL + 1.6RLL + 0.5W-Z 25.32 Not Required -
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 22.54 Not Required -
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 22.54 Not Required - 390
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 22.54 Not Required -
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 22.54 Not Required -
112 1.2DL + 1.0EQX + 0.5LL 2.70 Not Required -
113 1.2DL - 1.0EQX + 0.5LL 42.24 Not Required -
114 1.2DL + 1.0EQZ + 0.5LL 10.84 Not Required -
115 1.2DL - 1.0EQX + 0.5LL 34.10 Not Required -
116 0.9DL + 1.0W+X 15.79 Not Required -
117 0.9DL + 1.0W-X 15.79 Not Required -
118 0.9DL + 1.0W+Z 15.79 Not Required -
119 0.9DL + 1.0W-Z 15.79 Not Required -
120 0.9DL + 1.0EQX -2.99 Not Required -
121 0.9DL - 1.0EQX 36.56 Not Required -
122 0.9DL + 1.0EQZ 5.16 Not Required -
123 0.9DL - 1.0EQZ 28.42 Not Required -
 Footing Mark: F2 Date: January 14, 2020
Designed by: KAA
Project Name: PROPOSED 2-STOREY RESIDENTIAL HOUSE
Judgement : PASSED

hp
Lpz Lz
D

5 Pcs. Of 16 mm. bar

Lpx dia. Bothways
hf

Lx y

z x

Foundation Property Material Property

Lx = 900 mm. hf = 300 mm. fc' = 20.7 Mpa. ϒwater = 10 kN/m3
Lz = 900 mm. Df = 1200 mm. fy = 275 Mpa. μ = 0.5 (Soil to Concrete)
Lpx = 200 mm. hp = 900 mm. ϒsoil = 18 kN/m3 db = 16 mm
Lpz = 400 mm. cc = 75 mm. ϒconc. = 24 kN/m3

Net Soil Bearing Capacity

qall = 90 kPa. (Long Term) qall = 119.7 kPa. (Short Term)

Minimum Thickness: 300 mm Factor of Safety: Location of G.W.L.

Maximum Spacing: 300 mm Overturning = 1 3,000 mm.
Minimum Dimension: 700 mm Sliding = 1.5 Column Location
Buoyancy = 1.1 Corner

SERVICE LOAD COMBINATIONS

MY
LC LC Definition Force-X kN Force-Y kN Force-Z kN MX kNm MZ kNm qu (kPa) Soil Stress BUOY. OM Sliding
kNm

301 DL + 0.75LL + 0.75RLL + 0.45W+X 0.69 59.98 -26.05 0.00 0.00 0.00 74.04 0.62 1.10 1.00 1.50
302 DL + 0.75LL + 0.75RLL + 0.45W-X 0.69 59.98 -26.05 0.00 0.00 0.00 74.04 0.62 1.10 1.00 1.50
303 DL + 0.75LL + 0.75RLL + 0.45W+Z 0.69 59.98 -26.05 0.00 0.00 0.00 74.04 0.62 1.10 1.00 1.50
304 DL + 0.75LL + 0.75RLL + 0.45W-Z 0.69 59.98 -26.05 0.00 0.00 0.00 74.04 0.62 1.10 1.00 1.50
305 DL + 0.75LL + 0.75RLL + 0.54EQX -11.37 50.09 -26.15 0.00 0.00 0.00 61.84 0.52 1.10 1.00 1.50
306 DL + 0.75LL + 0.75RLL - 0.54EQX 13.66 70.76 -25.05 0.00 0.00 0.00 87.36 0.73 1.10 1.00 1.50
307 DL + 0.75LL + 0.75RLL + 0.54EQZ 4.53 67.15 -29.81 0.00 0.00 0.00 82.90 0.69 1.10 1.00 1.50
308 DL + 0.75LL + 0.75RLL - 0.54EQZ -2.24 53.71 -21.38 0.00 0.00 0.00 66.31 0.55 1.10 1.00 1.50
309 0.6DL + 0.6W+X 0.82 31.51 -13.84 0.00 0.00 0.00 38.90 0.32 1.10 1.00 1.50
310 0.6DL + 0.6W-X 0.82 31.51 -13.84 0.00 0.00 0.00 38.90 0.32 1.10 1.00 1.50
311 0.6DL + 0.6W+Z 0.82 31.51 -13.84 0.00 0.00 0.00 38.90 0.32 1.10 1.00 1.50
312 0.6DL + 0.6W-Z 0.82 31.51 -13.84 0.00 0.00 0.00 38.90 0.32 1.10 1.00 1.50
313 0.6DL + 0.7EQX -14.81 18.71 -13.96 0.00 0.00 0.00 23.10 0.19 1.10 1.00 1.50
314 0.6DL - 0.7EQX 17.65 45.50 -12.53 0.00 0.00 0.00 56.17 0.47 1.10 1.00 1.50
315 0.6DL + 0.7EQZ 5.81 40.82 -18.71 0.00 0.00 0.00 50.39 0.42 1.10 1.00 1.50
316 0.6DL - 0.7EQX -2.97 23.40 -7.78 0.00 0.00 0.00 28.88 0.24 1.10 1.00 1.50
317 DL + LL + RLL 0.74 62.73 -26.77 0.00 0.00 0.00 77.45 0.86 1.10 1.00 1.50
318 DL + LL + 0.6W+X 1.15 55.82 -25.71 0.00 0.00 0.00 68.91 0.58 1.10 1.00 1.50
319 DL + LL + 0.6W-X 1.15 55.82 -25.71 0.00 0.00 0.00 68.91 0.58 1.10 1.00 1.50
320 DL + LL + 0.6W+Z 1.15 55.82 -25.71 0.00 0.00 0.00 68.91 0.58 1.10 1.00 1.50
321 DL + LL + 0.6W-Z 1.15 55.82 -25.71 0.00 0.00 0.00 68.91 0.58 1.10 1.00 1.50
322 DL + LL + 0.7EQX -14.47 43.03 -25.82 0.00 0.00 0.00 53.12 0.44 1.10 1.00 1.50
323 DL + LL - 0.7EQX 17.98 69.81 -24.39 0.00 0.00 0.00 86.19 0.72 1.10 1.00 1.50
324 DL + LL + 0.7EQZ 6.15 65.13 -30.57 0.00 0.00 0.00 80.41 0.67 1.10 1.00 1.50
325 DL + LL - 0.7EQZ -2.64 47.71 -19.64 0.00 0.00 0.00 58.90 0.49 1.10 1.00 1.50
 ULTIMATE LOADS

Moment-X Momen Moment-

LC LC Definition Force-X kN Force-Y kN Force-Z kN Muz Mux Vu
kNm t-Y kNm Z kNm

101 1.4DL 3.31 74.91 -30.90 0.00 0.00 0.00 5.10 2.60 22.29
102 1.2DL + 1.6LL + 0.5RLL 1.35 72.02 -32.17 0.00 0.00 0.00 4.90 2.50 21.43
103 1.2DL + 1.6RLL + 0.5LL 0.90 75.77 -30.68 0.00 0.00 0.00 5.16 2.63 22.54
104 1.2DL + 1.6RLL + 0.5W+X 0.71 73.81 -29.66 0.00 0.00 0.00 5.02 2.56 21.96
105 1.2DL + 1.6RLL + 0.5W-X 0.71 73.81 -29.66 0.00 0.00 0.00 5.02 2.56 21.96
106 1.2DL + 1.6RLL + 0.5W+Z 0.71 73.81 -29.66 0.00 0.00 0.00 5.02 2.56 21.96
107 1.2DL + 1.6RLL + 0.5W-Z 0.71 73.81 -29.66 0.00 0.00 0.00 5.02 2.56 21.96
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 1.02 67.82 -29.84 0.00 0.00 0.00 4.62 2.35 20.18
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 1.02 67.82 -29.84 0.00 0.00 0.00 4.62 2.35 20.18
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 1.02 67.82 -29.84 0.00 0.00 0.00 4.62 2.35 20.18
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 1.02 67.82 -29.84 0.00 0.00 0.00 4.62 2.35 20.18
112 1.2DL + 1.0EQX + 0.5LL -20.65 46.53 -29.02 0.00 0.00 0.00 3.17 1.62 13.85
113 1.2DL - 1.0EQX + 0.5LL 25.71 84.80 -26.99 0.00 0.00 0.00 5.77 2.94 25.23
114 1.2DL + 1.0EQZ + 0.5LL 8.81 78.11 -35.81 0.00 0.00 0.00 5.32 2.71 23.24
115 1.2DL - 1.0EQX + 0.5LL -3.74 53.22 -20.20 0.00 0.00 0.00 3.62 1.85 15.84
116 0.9DL + 1.0W+X 1.13 47.16 -20.87 0.00 0.00 0.00 3.21 1.64 14.03
117 0.9DL + 1.0W-X 1.13 47.16 -20.87 0.00 0.00 0.00 3.21 1.64 14.03
118 0.9DL + 1.0W+Z 1.13 47.16 -20.87 0.00 0.00 0.00 3.21 1.64 14.03
119 0.9DL + 1.0W-Z 1.13 47.16 -20.87 0.00 0.00 0.00 3.21 1.64 14.03
120 0.9DL + 1.0EQX -21.05 29.03 -20.88 0.00 0.00 0.00 1.98 1.01 8.64
121 0.9DL - 1.0EQX 25.31 67.29 -18.85 0.00 0.00 0.00 4.58 2.34 20.02
122 0.9DL + 1.0EQZ 8.40 60.60 -27.67 0.00 0.00 0.00 4.12 2.10 18.03
123 0.9DL - 1.0EQZ -4.15 35.72 -12.06 0.00 0.00 0.00 2.43 1.24 10.63

LC LC Definition Force-Y kN Dowels n Dowels

101 1.4DL 74.91 Not Required -
102 1.2DL + 1.6LL + 0.5RLL 72.02 Not Required -
103 1.2DL + 1.6RLL + 0.5LL 75.77 Not Required -
104 1.2DL + 1.6RLL + 0.5W+X 73.81 Not Required -
105 1.2DL + 1.6RLL + 0.5W-X 73.81 Not Required - No Dowels Required

106 1.2DL + 1.6RLL + 0.5W+Z 73.81 Not Required -

107 1.2DL + 1.6RLL + 0.5W-Z 73.81 Not Required -
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 67.82 Not Required -
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 67.82 Not Required - 290
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 67.82 Not Required -
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 67.82 Not Required -
112 1.2DL + 1.0EQX + 0.5LL 46.53 Not Required -
113 1.2DL - 1.0EQX + 0.5LL 84.80 Not Required -
114 1.2DL + 1.0EQZ + 0.5LL 78.11 Not Required -
115 1.2DL - 1.0EQX + 0.5LL 53.22 Not Required -
116 0.9DL + 1.0W+X 47.16 Not Required -
117 0.9DL + 1.0W-X 47.16 Not Required -
118 0.9DL + 1.0W+Z 47.16 Not Required -
119 0.9DL + 1.0W-Z 47.16 Not Required -
120 0.9DL + 1.0EQX 29.03 Not Required -
121 0.9DL - 1.0EQX 67.29 Not Required -
122 0.9DL + 1.0EQZ 60.60 Not Required -
123 0.9DL - 1.0EQZ 35.72 Not Required -
 Footing Mark: F3 Date: January 14, 2020
Designed by: KAA
Project Name: PROPOSED 2-STOREY RESIDENTIAL HOUSE
Judgement : PASSED

hp
Lpz Lz
D

6 Pcs. Of 16 mm. bar

Lpx dia. Bothways
hf

Lx y

z x

Foundation Property Material Property

Lx = 1100 mm. hf = 300 mm. fc' = 20.7 Mpa. ϒwater = 10 kN/m3
Lz = 1100 mm. Df = 1200 mm. fy = 275 Mpa. μ = 0.5 (Soil to Concrete)
Lpx = 200 mm. hp = 900 mm. ϒsoil = 18 kN/m3 db = 16 mm
Lpz = 400 mm. cc = 75 mm. ϒconc. = 24 kN/m3

Net Soil Bearing Capacity

qall = 90 kPa. (Long Term) qall = 119.7 kPa. (Short Term)

Minimum Thickness: 300 mm Factor of Safety: Location of G.W.L.

Maximum Spacing: 300 mm Overturning = 1 3,000 mm.
Minimum Dimension: 700 mm Sliding = 1.5 Column Location
Buoyancy = 1.1 Corner

SERVICE LOAD COMBINATIONS

MY
LC LC Definition Force-X kN Force-Y kN Force-Z kN MX kNm MZ kNm qu (kPa) Soil Stress BUOY. OM Sliding
kNm

301 DL + 0.75LL + 0.75RLL + 0.45W+X 4.67 99.61 -2.47 0.00 0.00 0.00 82.32 0.69 1.10 1.00 1.50
302 DL + 0.75LL + 0.75RLL + 0.45W-X 4.67 99.61 -2.47 0.00 0.00 0.00 82.32 0.69 1.10 1.00 1.50
303 DL + 0.75LL + 0.75RLL + 0.45W+Z 4.67 99.61 -2.47 0.00 0.00 0.00 82.32 0.69 1.10 1.00 1.50
304 DL + 0.75LL + 0.75RLL + 0.45W-Z 4.67 99.61 -2.47 0.00 0.00 0.00 82.32 0.69 1.10 1.00 1.50
305 DL + 0.75LL + 0.75RLL + 0.54EQX 2.56 105.80 2.25 0.00 0.00 0.00 87.43 0.73 1.10 1.00 1.50
306 DL + 0.75LL + 0.75RLL - 0.54EQX 7.68 94.32 -6.29 0.00 0.00 0.00 77.95 0.65 1.10 1.00 1.50
307 DL + 0.75LL + 0.75RLL + 0.54EQZ 7.05 96.69 -24.82 0.00 0.00 0.00 79.91 0.67 1.10 1.00 1.50
308 DL + 0.75LL + 0.75RLL - 0.54EQZ 3.19 103.43 20.78 0.00 0.00 0.00 85.48 0.71 1.10 1.00 1.50
309 0.6DL + 0.6W+X 0.43 52.44 -1.91 0.00 0.00 0.00 43.33 0.36 1.10 1.00 1.50
310 0.6DL + 0.6W-X 0.43 52.44 -1.91 0.00 0.00 0.00 43.33 0.36 1.10 1.00 1.50
311 0.6DL + 0.6W+Z 0.43 52.44 -1.91 0.00 0.00 0.00 43.33 0.36 1.10 1.00 1.50
312 0.6DL + 0.6W-Z 0.43 52.44 -1.91 0.00 0.00 0.00 43.33 0.36 1.10 1.00 1.50
313 0.6DL + 0.7EQX -2.29 60.47 4.23 0.00 0.00 0.00 49.98 0.42 1.10 1.00 1.50
314 0.6DL - 0.7EQX 4.35 45.60 -6.85 0.00 0.00 0.00 37.69 0.31 1.10 1.00 1.50
315 0.6DL + 0.7EQZ 3.53 48.67 -30.87 0.00 0.00 0.00 40.22 0.34 1.10 1.00 1.50
316 0.6DL - 0.7EQX -1.47 57.40 28.25 0.00 0.00 0.00 47.44 0.40 1.10 1.00 1.50
317 DL + LL + RLL 6.26 103.95 -1.96 0.00 0.00 0.00 85.91 0.95 1.10 1.00 1.50
318 DL + LL + 0.6W+X 5.03 98.40 -2.92 0.00 0.00 0.00 81.32 0.68 1.10 1.00 1.50
319 DL + LL + 0.6W-X 5.03 98.40 -2.92 0.00 0.00 0.00 81.32 0.68 1.10 1.00 1.50
320 DL + LL + 0.6W+Z 5.03 98.40 -2.92 0.00 0.00 0.00 81.32 0.68 1.10 1.00 1.50
321 DL + LL + 0.6W-Z 5.03 98.40 -2.92 0.00 0.00 0.00 81.32 0.68 1.10 1.00 1.50
322 DL + LL + 0.7EQX 2.31 106.43 3.22 0.00 0.00 0.00 87.96 0.73 1.10 1.00 1.50
323 DL + LL - 0.7EQX 8.95 91.56 -7.86 0.00 0.00 0.00 75.67 0.63 1.10 1.00 1.50
324 DL + LL + 0.7EQZ 8.13 94.63 -31.88 0.00 0.00 0.00 78.21 0.65 1.10 1.00 1.50
325 DL + LL - 0.7EQZ 3.13 103.36 27.24 0.00 0.00 0.00 85.42 0.71 1.10 1.00 1.50
 ULTIMATE LOADS

Moment-X Momen Moment-

LC LC Definition Force-X kN Force-Y kN Force-Z kN Muz Mux Vu
kNm t-Y kNm Z kNm

101 1.4DL 2.40 123.75 -3.06 0.00 0.00 0.00 11.39 6.89 24.65
102 1.2DL + 1.6LL + 0.5RLL 8.64 125.51 -2.66 0.00 0.00 0.00 11.55 6.99 25.00
103 1.2DL + 1.6RLL + 0.5LL 5.02 119.30 -2.12 0.00 0.00 0.00 10.98 6.64 23.76
104 1.2DL + 1.6RLL + 0.5W+X 2.56 113.50 -2.55 0.00 0.00 0.00 10.45 6.32 22.61
105 1.2DL + 1.6RLL + 0.5W-X 2.56 113.50 -2.55 0.00 0.00 0.00 10.45 6.32 22.61
106 1.2DL + 1.6RLL + 0.5W+Z 2.56 113.50 -2.55 0.00 0.00 0.00 10.45 6.32 22.61
107 1.2DL + 1.6RLL + 0.5W-Z 2.56 113.50 -2.55 0.00 0.00 0.00 10.45 6.32 22.61
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 3.33 112.85 -3.51 0.00 0.00 0.00 10.39 6.28 22.48
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 3.33 112.85 -3.51 0.00 0.00 0.00 10.39 6.28 22.48
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 3.33 112.85 -3.51 0.00 0.00 0.00 10.39 6.28 22.48
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 3.33 112.85 -3.51 0.00 0.00 0.00 10.39 6.28 22.48
112 1.2DL + 1.0EQX + 0.5LL -0.73 121.99 5.22 0.00 0.00 0.00 11.23 6.79 24.30
113 1.2DL - 1.0EQX + 0.5LL 8.75 100.75 -10.60 0.00 0.00 0.00 9.27 5.61 20.07
114 1.2DL + 1.0EQZ + 0.5LL 7.58 105.13 -44.92 0.00 0.00 0.00 9.68 5.85 20.94
115 1.2DL - 1.0EQX + 0.5LL 0.44 117.61 39.54 0.00 0.00 0.00 10.83 6.55 23.42
116 0.9DL + 1.0W+X 0.54 78.55 -2.97 0.00 0.00 0.00 7.23 4.37 15.65
117 0.9DL + 1.0W-X 0.54 78.55 -2.97 0.00 0.00 0.00 7.23 4.37 15.65
118 0.9DL + 1.0W+Z 0.54 78.55 -2.97 0.00 0.00 0.00 7.23 4.37 15.65
119 0.9DL + 1.0W-Z 0.54 78.55 -2.97 0.00 0.00 0.00 7.23 4.37 15.65
120 0.9DL + 1.0EQX -3.20 90.17 5.95 0.00 0.00 0.00 8.30 5.02 17.96
121 0.9DL - 1.0EQX 6.28 68.93 -9.88 0.00 0.00 0.00 6.34 3.84 13.73
122 0.9DL + 1.0EQZ 5.11 73.31 -44.19 0.00 0.00 0.00 6.75 4.08 14.60
123 0.9DL - 1.0EQZ -2.03 85.79 40.26 0.00 0.00 0.00 7.90 4.78 17.09

LC LC Definition Force-Y kN Dowels n Dowels

101 1.4DL 123.75 Not Required -
102 1.2DL + 1.6LL + 0.5RLL 125.51 Not Required -
103 1.2DL + 1.6RLL + 0.5LL 119.30 Not Required -
104 1.2DL + 1.6RLL + 0.5W+X 113.50 Not Required -
105 1.2DL + 1.6RLL + 0.5W-X 113.50 Not Required - No Dowels Required

106 1.2DL + 1.6RLL + 0.5W+Z 113.50 Not Required -

107 1.2DL + 1.6RLL + 0.5W-Z 113.50 Not Required -
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 112.85 Not Required -
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 112.85 Not Required - 190
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 112.85 Not Required -
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 112.85 Not Required -
112 1.2DL + 1.0EQX + 0.5LL 121.99 Not Required -
113 1.2DL - 1.0EQX + 0.5LL 100.75 Not Required -
114 1.2DL + 1.0EQZ + 0.5LL 105.13 Not Required -
115 1.2DL - 1.0EQX + 0.5LL 117.61 Not Required -
116 0.9DL + 1.0W+X 78.55 Not Required -
117 0.9DL + 1.0W-X 78.55 Not Required -
118 0.9DL + 1.0W+Z 78.55 Not Required -
119 0.9DL + 1.0W-Z 78.55 Not Required -
120 0.9DL + 1.0EQX 90.17 Not Required -
121 0.9DL - 1.0EQX 68.93 Not Required -
122 0.9DL + 1.0EQZ 73.31 Not Required -
123 0.9DL - 1.0EQZ 85.79 Not Required -
 Footing Mark: F4 Date: January 14, 2020
Designed by: KAA
Project Name: PROPOSED 2-STOREY RESIDENTIAL HOUSE
Judgement : PASSED

hp
Lpz Lz
D

7 Pcs. Of 16 mm. bar

Lpx dia. Bothways
hf

Lx y

z x

Foundation Property Material Property

Lx = 1300 mm. hf = 300 mm. fc' = 20.7 Mpa. ϒwater = 10 kN/m3
Lz = 1300 mm. Df = 1200 mm. fy = 275 Mpa. μ = 0.5 (Soil to Concrete)
Lpx = 200 mm. hp = 900 mm. ϒsoil = 18 kN/m3 db = 16 mm
Lpz = 400 mm. cc = 75 mm. ϒconc. = 24 kN/m3

Net Soil Bearing Capacity

qall = 90 kPa. (Long Term) qall = 119.7 kPa. (Short Term)

Minimum Thickness: 300 mm Factor of Safety: Location of G.W.L.

Maximum Spacing: 300 mm Overturning = 1 3,000 mm.
Minimum Dimension: 700 mm Sliding = 1.5 Column Location
Buoyancy = 1.1 Corner

SERVICE LOAD COMBINATIONS

MY
LC LC Definition Force-X kN Force-Y kN Force-Z kN MX kNm MZ kNm qu (kPa) Soil Stress BUOY. OM Sliding
kNm

301 DL + 0.75LL + 0.75RLL + 0.45W+X 28.37 136.18 -6.55 0.00 0.00 0.00 80.58 0.67 1.10 1.00 1.50
302 DL + 0.75LL + 0.75RLL + 0.45W-X 28.37 136.18 -6.55 0.00 0.00 0.00 80.58 0.67 1.10 1.00 1.50
303 DL + 0.75LL + 0.75RLL + 0.45W+Z 28.37 136.18 -6.55 0.00 0.00 0.00 80.58 0.67 1.10 1.00 1.50
304 DL + 0.75LL + 0.75RLL + 0.45W-Z 28.37 136.18 -6.55 0.00 0.00 0.00 80.58 0.67 1.10 1.00 1.50
305 DL + 0.75LL + 0.75RLL + 0.54EQX 34.03 144.36 -2.39 0.00 0.00 0.00 85.42 0.71 1.10 1.00 1.50
306 DL + 0.75LL + 0.75RLL - 0.54EQX 23.62 128.91 -9.82 0.00 0.00 0.00 76.28 0.64 1.10 1.00 1.50
307 DL + 0.75LL + 0.75RLL + 0.54EQZ 25.76 133.14 -13.61 0.00 0.00 0.00 78.78 0.66 1.10 1.00 1.50
308 DL + 0.75LL + 0.75RLL - 0.54EQZ 31.89 140.12 1.40 0.00 0.00 0.00 82.91 0.69 1.10 1.00 1.50
309 0.6DL + 0.6W+X 13.23 72.78 -4.10 0.00 0.00 0.00 43.07 0.36 1.10 1.00 1.50
310 0.6DL + 0.6W-X 13.23 72.78 -4.10 0.00 0.00 0.00 43.07 0.36 1.10 1.00 1.50
311 0.6DL + 0.6W+Z 13.23 72.78 -4.10 0.00 0.00 0.00 43.07 0.36 1.10 1.00 1.50
312 0.6DL + 0.6W-Z 13.23 72.78 -4.10 0.00 0.00 0.00 43.07 0.36 1.10 1.00 1.50
313 0.6DL + 0.7EQX 20.58 83.40 1.31 0.00 0.00 0.00 49.35 0.41 1.10 1.00 1.50
314 0.6DL - 0.7EQX 7.08 63.37 -8.31 0.00 0.00 0.00 37.49 0.31 1.10 1.00 1.50
315 0.6DL + 0.7EQZ 9.85 68.86 -13.23 0.00 0.00 0.00 40.74 0.34 1.10 1.00 1.50
316 0.6DL - 0.7EQX 17.80 77.90 6.23 0.00 0.00 0.00 46.10 0.39 1.10 1.00 1.50
317 DL + LL + RLL 30.75 141.41 -6.19 0.00 0.00 0.00 83.67 0.93 1.10 1.00 1.50
318 DL + LL + 0.6W+X 27.86 134.44 -7.52 0.00 0.00 0.00 79.55 0.66 1.10 1.00 1.50
319 DL + LL + 0.6W-X 27.86 134.44 -7.52 0.00 0.00 0.00 79.55 0.66 1.10 1.00 1.50
320 DL + LL + 0.6W+Z 27.86 134.44 -7.52 0.00 0.00 0.00 79.55 0.66 1.10 1.00 1.50
321 DL + LL + 0.6W-Z 27.86 134.44 -7.52 0.00 0.00 0.00 79.55 0.66 1.10 1.00 1.50
322 DL + LL + 0.7EQX 35.21 145.05 -2.11 0.00 0.00 0.00 85.83 0.72 1.10 1.00 1.50
323 DL + LL - 0.7EQX 21.71 125.02 -11.73 0.00 0.00 0.00 73.98 0.62 1.10 1.00 1.50
324 DL + LL + 0.7EQZ 24.48 130.51 -16.65 0.00 0.00 0.00 77.23 0.65 1.10 1.00 1.50
325 DL + LL - 0.7EQZ 32.43 139.56 2.81 0.00 0.00 0.00 82.58 0.69 1.10 1.00 1.50
 ULTIMATE LOADS

Moment-X Momen Moment-

LC LC Definition Force-X kN Force-Y kN Force-Z kN Muz Mux Vu
kNm t-Y kNm Z kNm

101 1.4DL 32.26 171.22 -8.17 0.00 0.00 0.00 19.92 13.34 24.42
102 1.2DL + 1.6LL + 0.5RLL 37.46 170.32 -8.37 0.00 0.00 0.00 19.82 13.27 24.29
103 1.2DL + 1.6RLL + 0.5LL 34.03 163.32 -6.38 0.00 0.00 0.00 19.00 12.72 23.29
104 1.2DL + 1.6RLL + 0.5W+X 30.82 156.46 -6.34 0.00 0.00 0.00 18.20 12.19 22.31
105 1.2DL + 1.6RLL + 0.5W-X 30.82 156.46 -6.34 0.00 0.00 0.00 18.20 12.19 22.31
106 1.2DL + 1.6RLL + 0.5W+Z 30.82 156.46 -6.34 0.00 0.00 0.00 18.20 12.19 22.31
107 1.2DL + 1.6RLL + 0.5W-Z 30.82 156.46 -6.34 0.00 0.00 0.00 18.20 12.19 22.31
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 30.51 155.31 -8.18 0.00 0.00 0.00 18.07 12.10 22.15
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 30.51 155.31 -8.18 0.00 0.00 0.00 18.07 12.10 22.15
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 30.51 155.31 -8.18 0.00 0.00 0.00 18.07 12.10 22.15
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 30.51 155.31 -8.18 0.00 0.00 0.00 18.07 12.10 22.15
112 1.2DL + 1.0EQX + 0.5LL 40.00 167.44 -0.67 0.00 0.00 0.00 19.48 13.04 23.88
113 1.2DL - 1.0EQX + 0.5LL 20.72 138.82 -14.42 0.00 0.00 0.00 16.15 10.81 19.80
114 1.2DL + 1.0EQZ + 0.5LL 24.68 146.67 -21.44 0.00 0.00 0.00 17.06 11.42 20.92
115 1.2DL - 1.0EQX + 0.5LL 36.04 159.59 6.35 0.00 0.00 0.00 18.57 12.43 22.76
116 0.9DL + 1.0W+X 19.74 109.07 -6.25 0.00 0.00 0.00 12.69 8.49 15.55
117 0.9DL + 1.0W-X 19.74 109.07 -6.25 0.00 0.00 0.00 12.69 8.49 15.55
118 0.9DL + 1.0W+Z 19.74 109.07 -6.25 0.00 0.00 0.00 12.69 8.49 15.55
119 0.9DL + 1.0W-Z 19.74 109.07 -6.25 0.00 0.00 0.00 12.69 8.49 15.55
120 0.9DL + 1.0EQX 30.38 124.38 1.62 0.00 0.00 0.00 14.47 9.69 17.74
121 0.9DL - 1.0EQX 11.10 95.76 -12.13 0.00 0.00 0.00 11.14 7.46 13.66
122 0.9DL + 1.0EQZ 15.06 103.61 -19.15 0.00 0.00 0.00 12.05 8.07 14.78
123 0.9DL - 1.0EQZ 26.42 116.53 8.64 0.00 0.00 0.00 13.56 9.08 16.62

LC LC Definition Force-Y kN Dowels n Dowels

101 1.4DL 171.22 Not Required -
102 1.2DL + 1.6LL + 0.5RLL 170.32 Not Required -
103 1.2DL + 1.6RLL + 0.5LL 163.32 Not Required -
104 1.2DL + 1.6RLL + 0.5W+X 156.46 Not Required -
105 1.2DL + 1.6RLL + 0.5W-X 156.46 Not Required - No Dowels Required

106 1.2DL + 1.6RLL + 0.5W+Z 156.46 Not Required -

107 1.2DL + 1.6RLL + 0.5W-Z 156.46 Not Required -
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 155.31 Not Required -
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 155.31 Not Required - 90
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 155.31 Not Required -
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 155.31 Not Required -
112 1.2DL + 1.0EQX + 0.5LL 167.44 Not Required -
113 1.2DL - 1.0EQX + 0.5LL 138.82 Not Required -
114 1.2DL + 1.0EQZ + 0.5LL 146.67 Not Required -
115 1.2DL - 1.0EQX + 0.5LL 159.59 Not Required -
116 0.9DL + 1.0W+X 109.07 Not Required -
117 0.9DL + 1.0W-X 109.07 Not Required -
118 0.9DL + 1.0W+Z 109.07 Not Required -
119 0.9DL + 1.0W-Z 109.07 Not Required -
120 0.9DL + 1.0EQX 124.38 Not Required -
121 0.9DL - 1.0EQX 95.76 Not Required -
122 0.9DL + 1.0EQZ 103.61 Not Required -
123 0.9DL - 1.0EQZ 116.53 Not Required -
 Footing Mark: F5 Date: January 14, 2020
Designed by: KAA
Project Name: PROPOSED 2-STOREY RESIDENTIAL HOUSE
Judgement : PASSED

hp
Lpz Lz
D

8 Pcs. Of 16 mm. bar

Lpx dia. Bothways
hf

Lx y

z x

Foundation Property Material Property

Lx = 1400 mm. hf = 300 mm. fc' = 20.7 Mpa. ϒwater = 10 kN/m3
Lz = 1400 mm. Df = 1200 mm. fy = 275 Mpa. μ = 0.5 (Soil to Concrete)
Lpx = 200 mm. hp = 900 mm. ϒsoil = 18 kN/m3 db = 16 mm
Lpz = 400 mm. cc = 75 mm. ϒconc. = 24 kN/m3

Net Soil Bearing Capacity

qall = 90 kPa. (Long Term) qall = 119.7 kPa. (Short Term)

Minimum Thickness: 300 mm Factor of Safety: Location of G.W.L.

Maximum Spacing: 300 mm Overturning = 1 3,000 mm.
Minimum Dimension: 700 mm Sliding = 1.5 Column Location
Buoyancy = 1.1 Corner

SERVICE LOAD COMBINATIONS

MY
LC LC Definition Force-X kN Force-Y kN Force-Z kN MX kNm MZ kNm qu (kPa) Soil Stress BUOY. OM Sliding
kNm

301 DL + 0.75LL + 0.75RLL + 0.45W+X -21.47 164.76 3.58 0.00 0.00 0.00 84.06 0.70 1.10 1.00 1.50
302 DL + 0.75LL + 0.75RLL + 0.45W-X -21.47 164.76 3.58 0.00 0.00 0.00 84.06 0.70 1.10 1.00 1.50
303 DL + 0.75LL + 0.75RLL + 0.45W+Z -21.47 164.76 3.58 0.00 0.00 0.00 84.06 0.70 1.10 1.00 1.50
304 DL + 0.75LL + 0.75RLL + 0.45W-Z -21.47 164.76 3.58 0.00 0.00 0.00 84.06 0.70 1.10 1.00 1.50
305 DL + 0.75LL + 0.75RLL + 0.54EQX -16.57 173.18 3.66 0.00 0.00 0.00 88.36 0.74 1.10 1.00 1.50
306 DL + 0.75LL + 0.75RLL - 0.54EQX -25.48 157.25 4.40 0.00 0.00 0.00 80.23 0.67 1.10 1.00 1.50
307 DL + 0.75LL + 0.75RLL + 0.54EQZ -22.44 162.96 -15.62 0.00 0.00 0.00 83.14 0.69 1.10 1.00 1.50
308 DL + 0.75LL + 0.75RLL - 0.54EQZ -19.61 167.47 23.68 0.00 0.00 0.00 85.44 0.71 1.10 1.00 1.50
309 0.6DL + 0.6W+X -10.33 80.39 0.55 0.00 0.00 0.00 41.02 0.34 1.10 1.00 1.50
310 0.6DL + 0.6W-X -10.33 80.39 0.55 0.00 0.00 0.00 41.02 0.34 1.10 1.00 1.50
311 0.6DL + 0.6W+Z -10.33 80.39 0.55 0.00 0.00 0.00 41.02 0.34 1.10 1.00 1.50
312 0.6DL + 0.6W-Z -10.33 80.39 0.55 0.00 0.00 0.00 41.02 0.34 1.10 1.00 1.50
313 0.6DL + 0.7EQX -3.95 91.32 0.66 0.00 0.00 0.00 46.59 0.39 1.10 1.00 1.50
314 0.6DL - 0.7EQX -15.50 70.67 1.63 0.00 0.00 0.00 36.06 0.30 1.10 1.00 1.50
315 0.6DL + 0.7EQZ -11.56 78.07 -24.32 0.00 0.00 0.00 39.83 0.33 1.10 1.00 1.50
316 0.6DL - 0.7EQX -7.89 83.92 26.62 0.00 0.00 0.00 42.81 0.36 1.10 1.00 1.50
317 DL + LL + RLL -22.63 175.29 4.74 0.00 0.00 0.00 89.43 0.99 1.10 1.00 1.50
318 DL + LL + 0.6W+X -19.44 163.19 2.12 0.00 0.00 0.00 83.26 0.70 1.10 1.00 1.50
319 DL + LL + 0.6W-X -19.44 163.19 2.12 0.00 0.00 0.00 83.26 0.70 1.10 1.00 1.50
320 DL + LL + 0.6W+Z -19.44 163.19 2.12 0.00 0.00 0.00 83.26 0.70 1.10 1.00 1.50
321 DL + LL + 0.6W-Z -19.44 163.19 2.12 0.00 0.00 0.00 83.26 0.70 1.10 1.00 1.50
322 DL + LL + 0.7EQX -13.07 174.11 2.23 0.00 0.00 0.00 88.83 0.74 1.10 1.00 1.50
323 DL + LL - 0.7EQX -24.61 153.46 3.20 0.00 0.00 0.00 78.30 0.65 1.10 1.00 1.50
324 DL + LL + 0.7EQZ -20.68 160.87 -22.75 0.00 0.00 0.00 82.07 0.69 1.10 1.00 1.50
325 DL + LL - 0.7EQZ -17.00 166.71 28.19 0.00 0.00 0.00 85.06 0.71 1.10 1.00 1.50
 ULTIMATE LOADS

Moment-X Momen Moment-

LC LC Definition Force-X kN Force-Y kN Force-Z kN Muz Mux Vu
kNm t-Y kNm Z kNm

101 1.4DL -22.70 188.99 2.67 0.00 0.00 0.00 24.30 16.87 23.24
102 1.2DL + 1.6LL + 0.5RLL -25.55 213.81 4.59 0.00 0.00 0.00 27.49 19.09 26.29
103 1.2DL + 1.6RLL + 0.5LL -26.82 194.79 5.92 0.00 0.00 0.00 25.04 17.39 23.95
104 1.2DL + 1.6RLL + 0.5W+X -26.01 179.89 5.02 0.00 0.00 0.00 23.13 16.06 22.12
105 1.2DL + 1.6RLL + 0.5W-X -26.01 179.89 5.02 0.00 0.00 0.00 23.13 16.06 22.12
106 1.2DL + 1.6RLL + 0.5W+Z -26.01 179.89 5.02 0.00 0.00 0.00 23.13 16.06 22.12
107 1.2DL + 1.6RLL + 0.5W-Z -26.01 179.89 5.02 0.00 0.00 0.00 23.13 16.06 22.12
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL -23.66 181.14 2.70 0.00 0.00 0.00 23.29 16.17 22.27
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL -23.66 181.14 2.70 0.00 0.00 0.00 23.29 16.17 22.27
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL -23.66 181.14 2.70 0.00 0.00 0.00 23.29 16.17 22.27
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL -23.66 181.14 2.70 0.00 0.00 0.00 23.29 16.17 22.27
112 1.2DL + 1.0EQX + 0.5LL -12.52 191.14 2.01 0.00 0.00 0.00 24.57 17.07 23.50
113 1.2DL - 1.0EQX + 0.5LL -29.02 161.64 3.39 0.00 0.00 0.00 20.78 14.43 19.87
114 1.2DL + 1.0EQZ + 0.5LL -23.39 172.21 -33.69 0.00 0.00 0.00 22.14 15.38 21.18
115 1.2DL - 1.0EQX + 0.5LL -18.15 180.56 39.08 0.00 0.00 0.00 23.21 16.12 22.20
116 0.9DL + 1.0W+X -15.59 120.49 0.72 0.00 0.00 0.00 15.49 10.76 14.82
117 0.9DL + 1.0W-X -15.59 120.49 0.72 0.00 0.00 0.00 15.49 10.76 14.82
118 0.9DL + 1.0W+Z -15.59 120.49 0.72 0.00 0.00 0.00 15.49 10.76 14.82
119 0.9DL + 1.0W-Z -15.59 120.49 0.72 0.00 0.00 0.00 15.49 10.76 14.82
120 0.9DL + 1.0EQX -6.34 136.24 1.03 0.00 0.00 0.00 17.52 12.16 16.75
121 0.9DL - 1.0EQX -22.84 106.74 2.41 0.00 0.00 0.00 13.72 9.53 13.12
122 0.9DL + 1.0EQZ -17.22 117.32 -34.67 0.00 0.00 0.00 15.08 10.47 14.43
123 0.9DL - 1.0EQZ -11.97 125.66 38.11 0.00 0.00 0.00 16.16 11.22 15.45

LC LC Definition Force-Y kN Dowels n Dowels

101 1.4DL 188.99 Not Required -
102 1.2DL + 1.6LL + 0.5RLL 213.81 Not Required -
103 1.2DL + 1.6RLL + 0.5LL 194.79 Not Required -
104 1.2DL + 1.6RLL + 0.5W+X 179.89 Not Required -
105 1.2DL + 1.6RLL + 0.5W-X 179.89 Not Required - No Dowels Required

106 1.2DL + 1.6RLL + 0.5W+Z 179.89 Not Required -

107 1.2DL + 1.6RLL + 0.5W-Z 179.89 Not Required -
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 181.14 Not Required -
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 181.14 Not Required - 40
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 181.14 Not Required -
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 181.14 Not Required -
112 1.2DL + 1.0EQX + 0.5LL 191.14 Not Required -
113 1.2DL - 1.0EQX + 0.5LL 161.64 Not Required -
114 1.2DL + 1.0EQZ + 0.5LL 172.21 Not Required -
115 1.2DL - 1.0EQX + 0.5LL 180.56 Not Required -
116 0.9DL + 1.0W+X 120.49 Not Required -
117 0.9DL + 1.0W-X 120.49 Not Required -
118 0.9DL + 1.0W+Z 120.49 Not Required -
119 0.9DL + 1.0W-Z 120.49 Not Required -
120 0.9DL + 1.0EQX 136.24 Not Required -
121 0.9DL - 1.0EQX 106.74 Not Required -
122 0.9DL + 1.0EQZ 117.32 Not Required -
123 0.9DL - 1.0EQZ 125.66 Not Required -
 Footing Mark: F6 Date: January 14, 2020
Designed by: KAA
Project Name: PROPOSED 2-STOREY RESIDENTIAL HOUSE
Judgement : PASSED

hp
Lpz Lz
D

9 Pcs. Of 16 mm. bar

Lpx dia. Bothways
hf

Lx y

z x

Foundation Property Material Property

Lx = 1700 mm. hf = 300 mm. fc' = 20.7 Mpa. ϒwater = 10 kN/m3
Lz = 1700 mm. Df = 1200 mm. fy = 275 Mpa. μ = 0.5 (Soil to Concrete)
Lpx = 200 mm. hp = 900 mm. ϒsoil = 18 kN/m3 db = 16 mm
Lpz = 400 mm. cc = 75 mm. ϒconc. = 24 kN/m3

Net Soil Bearing Capacity

qall = 90 kPa. (Long Term) qall = 119.7 kPa. (Short Term)

Minimum Thickness: 300 mm Factor of Safety: Location of G.W.L.

Maximum Spacing: 300 mm Overturning = 1 3,000 mm.
Minimum Dimension: 700 mm Sliding = 1.5 Column Location
Buoyancy = 1.1 Corner

SERVICE LOAD COMBINATIONS

MY
LC LC Definition Force-X kN Force-Y kN Force-Z kN MX kNm MZ kNm qu (kPa) Soil Stress BUOY. OM Sliding
kNm

301 DL + 0.75LL + 0.75RLL + 0.45W+X -19.57 229.74 24.89 0.00 0.00 0.00 79.49 0.66 1.10 1.00 1.50
302 DL + 0.75LL + 0.75RLL + 0.45W-X -19.57 229.74 24.89 0.00 0.00 0.00 79.49 0.66 1.10 1.00 1.50
303 DL + 0.75LL + 0.75RLL + 0.45W+Z -19.57 229.74 24.89 0.00 0.00 0.00 79.49 0.66 1.10 1.00 1.50
304 DL + 0.75LL + 0.75RLL + 0.45W-Z -19.57 229.74 24.89 0.00 0.00 0.00 79.49 0.66 1.10 1.00 1.50
305 DL + 0.75LL + 0.75RLL + 0.54EQX -25.00 235.41 24.60 0.00 0.00 0.00 81.46 0.68 1.10 1.00 1.50
306 DL + 0.75LL + 0.75RLL - 0.54EQX -13.25 224.97 26.07 0.00 0.00 0.00 77.84 0.65 1.10 1.00 1.50
307 DL + 0.75LL + 0.75RLL + 0.54EQZ -16.51 226.36 34.63 0.00 0.00 0.00 78.33 0.65 1.10 1.00 1.50
308 DL + 0.75LL + 0.75RLL - 0.54EQZ -21.73 234.02 16.05 0.00 0.00 0.00 80.98 0.68 1.10 1.00 1.50
309 0.6DL + 0.6W+X -9.83 119.09 16.41 0.00 0.00 0.00 41.21 0.34 1.10 1.00 1.50
310 0.6DL + 0.6W-X -9.83 119.09 16.41 0.00 0.00 0.00 41.21 0.34 1.10 1.00 1.50
311 0.6DL + 0.6W+Z -9.83 119.09 16.41 0.00 0.00 0.00 41.21 0.34 1.10 1.00 1.50
312 0.6DL + 0.6W-Z -9.83 119.09 16.41 0.00 0.00 0.00 41.21 0.34 1.10 1.00 1.50
313 0.6DL + 0.7EQX -16.85 126.46 16.05 0.00 0.00 0.00 43.76 0.37 1.10 1.00 1.50
314 0.6DL - 0.7EQX -1.62 112.93 17.96 0.00 0.00 0.00 39.08 0.33 1.10 1.00 1.50
315 0.6DL + 0.7EQZ -5.85 114.73 29.05 0.00 0.00 0.00 39.70 0.33 1.10 1.00 1.50
316 0.6DL - 0.7EQX -12.61 124.66 4.96 0.00 0.00 0.00 43.13 0.36 1.10 1.00 1.50
317 DL + LL + RLL -20.37 240.42 24.34 0.00 0.00 0.00 83.19 0.92 1.10 1.00 1.50
318 DL + LL + 0.6W+X -18.44 227.44 24.42 0.00 0.00 0.00 78.70 0.66 1.10 1.00 1.50
319 DL + LL + 0.6W-X -18.44 227.44 24.42 0.00 0.00 0.00 78.70 0.66 1.10 1.00 1.50
320 DL + LL + 0.6W+Z -18.44 227.44 24.42 0.00 0.00 0.00 78.70 0.66 1.10 1.00 1.50
321 DL + LL + 0.6W-Z -18.44 227.44 24.42 0.00 0.00 0.00 78.70 0.66 1.10 1.00 1.50
322 DL + LL + 0.7EQX -25.46 234.80 24.07 0.00 0.00 0.00 81.25 0.68 1.10 1.00 1.50
323 DL + LL - 0.7EQX -10.22 221.27 25.98 0.00 0.00 0.00 76.57 0.64 1.10 1.00 1.50
324 DL + LL + 0.7EQZ -14.46 223.07 37.07 0.00 0.00 0.00 77.19 0.64 1.10 1.00 1.50
325 DL + LL - 0.7EQZ -21.22 233.00 12.98 0.00 0.00 0.00 80.62 0.67 1.10 1.00 1.50
 ULTIMATE LOADS

Moment-X Momen Moment-

LC LC Definition Force-X kN Force-Y kN Force-Z kN Muz Mux Vu
kNm t-Y kNm Z kNm

101 1.4DL -21.54 279.28 39.68 0.00 0.00 0.00 46.20 34.70 23.29
102 1.2DL + 1.6LL + 0.5RLL -23.65 291.26 28.36 0.00 0.00 0.00 48.19 36.19 24.29
103 1.2DL + 1.6RLL + 0.5LL -23.73 273.48 31.25 0.00 0.00 0.00 45.24 33.98 22.81
104 1.2DL + 1.6RLL + 0.5W+X -23.01 258.70 32.41 0.00 0.00 0.00 42.80 32.15 21.57
105 1.2DL + 1.6RLL + 0.5W-X -23.01 258.70 32.41 0.00 0.00 0.00 42.80 32.15 21.57
106 1.2DL + 1.6RLL + 0.5W+Z -23.01 258.70 32.41 0.00 0.00 0.00 42.80 32.15 21.57
107 1.2DL + 1.6RLL + 0.5W-Z -23.01 258.70 32.41 0.00 0.00 0.00 42.80 32.15 21.57
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL -21.95 258.85 31.01 0.00 0.00 0.00 42.82 32.17 21.59
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL -21.95 258.85 31.01 0.00 0.00 0.00 42.82 32.17 21.59
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL -21.95 258.85 31.01 0.00 0.00 0.00 42.82 32.17 21.59
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL -21.95 258.85 31.01 0.00 0.00 0.00 42.82 32.17 21.59
112 1.2DL + 1.0EQX + 0.5LL -30.57 263.32 30.99 0.00 0.00 0.00 43.56 32.72 21.96
113 1.2DL - 1.0EQX + 0.5LL -8.81 244.00 33.71 0.00 0.00 0.00 40.37 30.32 20.35
114 1.2DL + 1.0EQZ + 0.5LL -14.86 246.57 49.56 0.00 0.00 0.00 40.79 30.64 20.56
115 1.2DL - 1.0EQX + 0.5LL -24.52 260.75 15.15 0.00 0.00 0.00 43.14 32.40 21.74
116 0.9DL + 1.0W+X -14.85 178.54 24.51 0.00 0.00 0.00 29.54 22.19 14.89
117 0.9DL + 1.0W-X -14.85 178.54 24.51 0.00 0.00 0.00 29.54 22.19 14.89
118 0.9DL + 1.0W+Z -14.85 178.54 24.51 0.00 0.00 0.00 29.54 22.19 14.89
119 0.9DL + 1.0W-Z -14.85 178.54 24.51 0.00 0.00 0.00 29.54 22.19 14.89
120 0.9DL + 1.0EQX -24.73 189.20 24.15 0.00 0.00 0.00 31.30 23.51 15.78
121 0.9DL - 1.0EQX -2.97 169.88 26.87 0.00 0.00 0.00 28.10 21.11 14.17
122 0.9DL + 1.0EQZ -9.02 172.45 42.72 0.00 0.00 0.00 28.53 21.43 14.38
123 0.9DL - 1.0EQZ -18.68 186.63 8.30 0.00 0.00 0.00 30.88 23.19 15.56

LC LC Definition Force-Y kN Dowels n Dowels

101 1.4DL 279.28 Not Required -
102 1.2DL + 1.6LL + 0.5RLL 291.26 Not Required -
103 1.2DL + 1.6RLL + 0.5LL 273.48 Not Required -
104 1.2DL + 1.6RLL + 0.5W+X 258.70 Not Required -
105 1.2DL + 1.6RLL + 0.5W-X 258.70 Not Required - No Dowels Required

106 1.2DL + 1.6RLL + 0.5W+Z 258.70 Not Required -

107 1.2DL + 1.6RLL + 0.5W-Z 258.70 Not Required - No hooks Required
108 1.2DL + 1.0W+X + 0.5LL + 0.5RLL 258.85 Not Required -
109 1.2DL + 1.0W-X + 0.5LL + 0.5RLL 258.85 Not Required -
110 1.2DL + 1.0W+Z + 0.5LL + 0.5RLL 258.85 Not Required -
111 1.2DL + 1.0W-Z + 0.5LL + 0.5RLL 258.85 Not Required -
112 1.2DL + 1.0EQX + 0.5LL 263.32 Not Required -
113 1.2DL - 1.0EQX + 0.5LL 244.00 Not Required -
114 1.2DL + 1.0EQZ + 0.5LL 246.57 Not Required -
115 1.2DL - 1.0EQX + 0.5LL 260.75 Not Required -
116 0.9DL + 1.0W+X 178.54 Not Required -
117 0.9DL + 1.0W-X 178.54 Not Required -
118 0.9DL + 1.0W+Z 178.54 Not Required -
119 0.9DL + 1.0W-Z 178.54 Not Required -
120 0.9DL + 1.0EQX 189.20 Not Required -
121 0.9DL - 1.0EQX 169.88 Not Required -
122 0.9DL + 1.0EQZ 172.45 Not Required -
123 0.9DL - 1.0EQZ 186.63 Not Required -