0% found this document useful (0 votes)
56 views

Sewer Pipes With Sacrifi Cial Layers: (Spigot & Socket Joint) - SANS 677

The document provides specifications for sewer pipes with spigot and socket joints. It lists the maximum allowed deflections for different nominal pipe diameters. It also specifies the standard sacrificial layer thicknesses for different pipe sizes. The joint uses a rolling rubber ring and no lubricant is required. The document concludes with a table listing technical specifications such as inner diameter, outer diameter, wall thickness, length, and mass for various standard pipe sizes in pipe classes 50D, 75D and 100D.

Uploaded by

Ephraim Barez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
56 views

Sewer Pipes With Sacrifi Cial Layers: (Spigot & Socket Joint) - SANS 677

The document provides specifications for sewer pipes with spigot and socket joints. It lists the maximum allowed deflections for different nominal pipe diameters. It also specifies the standard sacrificial layer thicknesses for different pipe sizes. The joint uses a rolling rubber ring and no lubricant is required. The document concludes with a table listing technical specifications such as inner diameter, outer diameter, wall thickness, length, and mass for various standard pipe sizes in pipe classes 50D, 75D and 100D.

Uploaded by

Ephraim Barez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sewer Pipes with

POLES Sacrifi cial Layers


FOR LIGHTING
(Spigot & Socket Joint) - SANS 677
Notes:
1. For satisfactory performance the allowable joint deflections given below should not be exceeded.
Nominal Diameters Maximum Deflection Nominal Diameters Maximum Deflection
300 - 375 2,0° 1050 - 1200 0,75°
450 - 600 1,5° 1350 - 1800 0,5°
675 - 900 1,0°
2. The Sacrificial layer thickness on standard Rocla sewer pipes are:
300 - 1050 ND - 13mm 1200 - 1800 ND - 19mm
If required pipes with thicker sacrificial layers can be supplied.
3. The joint uses the rolling rubber ring principal and no lubricant is required.

Nominal Inside Outside Wall Nominal Outside Outside Inside Approximate


Pipe Class Diameter Diameter Diameter Thickness Length Diameter Socket Socket Mass per
(ND) (ID) (OD) (T) (L) (A) (B) (S) pipe
mm mm mm mm m mm mm mm kg/pipe

300 272 368 48 1.83/2.44 464 225 114 254/331


375 343 445 51 1.83/2.44 540 235 127 332/432
450 419 533 57 1.83/2.44 641 260 127 448/587
525 508 616 54 2.44 730 265 121 661
600 585 699 57 2.44 825 300 139 812
675 659 787 64 2.44 920 315 139 1023
750 736 870 67 2.44 1016 330 139 1200
50D 825 804 946 71 2.44 1086 330 139 1366
900 887 1041 77 2.44 1194 360 139 1648
1050 1008 1194 93 2.44 1353 390 162 2261
1200 1149 1365 108 2.44 1543 425 168 3007
1350 1290 1524 117 2.44 1708 445 175 3641
1500 1423 1689 133 2.44 1886 490 190 4598
1650 1602 1878 138 2.44 2088 510 190 5353
1800 1717 2019 151 2.44 2250 525 190 6299
300 272 368 48 1.83/2.44 464 225 114 254/331
375 343 445 51 1.83/2.44 540 235 127 332/432
450 419 533 57 1.83/2.44 641 260 127 448/587
525 488 616 64 2.44 730 265 121 760
600 559 699 70 2.44 825 300 139 959
675 633 787 77 2.44 920 315 139 1189
750 704 870 83 2.44 1016 330 139 1427
75D 825 762 946 92 2.44 1086 330 139 1691
900 843 1041 99 2.44 1194 360 139 2025
1050 960 1194 117 2.44 1353 390 162 2728
1200 1119 1365 123 2.44 1543 425 168 3343
1350 1254 1524 135 2.44 1708 445 175 4094
1500 1381 1689 154 2.44 1886 490 190 5180
1650 1562 1878 158 2.44 2088 510 190 5979
1800 1669 2019 175 2.44 2250 525 190 7102
300 272 368 48 1.83/2.44 464 225 114 254/331
375 343 445 51 1.83/2.44 540 235 127 332/432
450 419 533 57 1.83/2.44 641 260 127 448/587
525 488 616 64 2.44 730 265 121 760
600 559 699 70 2.44 825 300 139 959
675 621 787 77 2.44 920 315 139 1189
750 704 870 83 2.44 1016 330 139 1427
825 762 946 92 2.44 1086 330 139 1691
100D 900 843 1041 99 2.44 1194 360 139 2025
1050 960 1194 117 2.44 1353 390 162 2728
1200 1089 1365 138 2.44 1543 425 168 3671
1350 1224 1524 150 2.44 1708 445 175 4462
1500 1345 1689 172 2.44 1886 490 190 5665
1650 1510 1878 184 2.44 2088 510 190 6769
1800 1627 2019 196 2.44 2250 525 190 7787
Please note: Mass is an approximation only. Rocla cannot guarantee the exact mass as listed on this table.

You might also like