Scribd
Upload
22 views5 pages

Crankcase Breather - Remove - Filtered Breather (KENR6081-15)

This document provides instructions for removing a crankcase breather filter from a engine. It outlines 13 steps to remove the filter housing, gauze, seals, and mounting hardware. A specialized tool is required to unscrew the breather body. Diagrams illustrate the component locations and tool dimensions.

Uploaded by

Anderson Oliveira Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views5 pages

Crankcase Breather - Remove - Filtered Breather (KENR6081-15)

This document provides instructions for removing a crankcase breather filter from a engine. It outlines 13 steps to remove the filter housing, gauze, seals, and mounting hardware. A specialized tool is required to unscrew the breather body. Diagrams illustrate the component locations and tool dimensions.

Uploaded by

Anderson Oliveira Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

02/07/2023, 22:53 SIS 2.

2014/07/22 Crankcase Breather - Remove - Filtered Breather (KENR6081-15)

SMCS - 1317 i05871096

Removal Procedure
PIP
Table 1
-
202 1085
3 3
Required Tools 

01:
Tool  Part Number  Part Description  Qty 
/ 0 7 253
5 / 0
KE :08- 3
3
A  -  Breather Tool  1 

N 0
NOTICE
©2 R 608 3:00
023
Keep all parts clean from contaminants.
1
Cat
Contaminants may cause rapid wear and shortened component
life.

erp
illa
rI nc.

https://sis2.cat.com/#/print-preview/service/%257B%2522formattedPublicationDate%2522%253A%25222014%252F07%252F22%2522%252C%… 1/5
02/07/2023, 22:53 SIS 2.0

Illustration 1 g01339595
Breather tool

1. To remove the breather body, Tooling (A) must be used. The tool should be fabricated from
3.1 mm (1/8 inch) steel stock. The dimensions for the tool are given in Illustration 1. All
dimensions are shown in millimeters.

https://sis2.cat.com/#/print-preview/service/%257B%2522formattedPublicationDate%2522%253A%25222014%252F07%252F22%2522%252C%… 2/5
02/07/2023, 22:53 SIS 2.0

Illustration 2 g01339597

https://sis2.cat.com/#/print-preview/service/%257B%2522formattedPublicationDate%2522%253A%25222014%252F07%252F22%2522%252C%… 3/5
02/07/2023, 22:53 SIS 2.0

Illustration 3 g03704554
Note: Illustration 3 shows the later type of crankcase breather cover that is installed in the valve
mechanism cover. The later type of crankcase breather cover is not serviceable.

https://sis2.cat.com/#/print-preview/service/%257B%2522formattedPublicationDate%2522%253A%25222014%252F07%252F22%2522%252C%… 4/5
02/07/2023, 22:53 SIS 2.0

Illustration 4 g01339655
2. Remove canister (20) for the breather. Refer to Operation and Maintenance Manual,
"Crankcase Breather (Canister) - Replace".

3. Loosen clamp (19) and remove hose (21).

4. Release two spring clamps (14) in order to remove hose (15). Remove the hose.

5. Remove bolts (17). Remove base (18) from the inlet manifold.
If a spacer is installed between the base and the inlet manifold, remove spacer (16).

6. Carefully pry cover (1) from breather body (4).


Note: Note the orientation of the outlet.

7. Remove gauze (2) from breather body (4).

8. Remove O-ring seal (3) from breather body (4).

9. Use Tooling (A) in order to unscrew breather body (4) from adapter plate (8).

10. Remove O-ring seal (5) from breather body (4).

11. Remove bolts (6) and washers (7) from adapter plate (8).

12. Remove adapter plate (8) from valve mechanism cover (10).

13. Remove O-ring seal (9) from adapter plate (8).

PIP-10853253
2023/07/03
01:53:02-03:00
i02786797
© 2023 Caterpillar Inc.

https://sis2.cat.com/#/print-preview/service/%257B%2522formattedPublicationDate%2522%253A%25222014%252F07%252F22%2522%252C%… 5/5

You might also like