COMPONENTS PRODUCT INFORMATION

Compact Waterproof Automotive In-line Connector CONNECTOR

MB-0354-4
MX80 Series Feb.2021

RoHS Compliant

The MX80 Series is a family of compact waterproof automotive in-line connectors.

They are miniaturized by design and ideal for use in areas where vehicle mounting
space is limited. MX80 Series connectors support a varying wire size range for
exceptional power and control.

Applicable Market Segments

・Example automotive applications include but are not limited to side view mirrors,
interior/exterior lighting, sunroof modules, body sensors, and peripheral devices.

Features
■ ISO/JASO/EWCAP/VDA standard 0.64 mm tab size
■ Terminal Position Assurance (TPA) on pin and socket housing
■ USCAR-2 and LV214 Tested
■ IPX7 ingress protection rated
■ Compatible with 2.54mm pitch pin contacts
■ Integrated bracket supports chassis fastening vehicle clips

General Specifications

Number of Contacts 2, 3, and 4 positions

Operating Temperature Range -40 ~ +125 ℃ 1
0.13 ~ 1.0㎜² nominal cross-section
Applicable Wire Cable types recommended:
(FLRY-A, FLRY-B, AESSX, FLCUSNRY, etc.）
Number of Positions
Wire Size
2 3 4
Rated Current 2 0.13 ㎜² 4.2 A 3.7 A 3.6 A
0.35 ㎜² 7.1 A 6.4 A 5.8 A
1.0 ㎜² 10.3 A 10.0 A 9.5 A

Dielectric Withstanding Voltage AC 500V (1 minute)

Note 1. This range includes temperature increase from current load.
Note 2. Ambient temperature is 80ºC when amperage was measured.
JAE Connector Div. Proprietary. Copyright © 2021, Japan Aviation Electronics Industry, Ltd. 1／6
 MB-0354-4

Ordering Information

MX80 A 02 S Z1 A
A ~ C:
Series: MX80 Mating Key Variations
Modification Code #1
A or B Modification Code #2
Number of Contacts:
2 ~ 4 positions S: Socket, P: Pin

Configuration / Material and Finish

Socket Connector In-line Pin Connector

(1) Socket Contact (1) Pin Terminal

(2) Rear Cover (2) Rear Cover

(3) Mat Seal (3) Mat Seal

(4) Socket Housing
(4) Pin Housing
(5) Radial Seal
(6) Front Retainer (5) Front Retainer

Component Material / Finish Component Material / Finish

(1) Socket Contact 3 Copper alloy / Tin plating (1) Pin Contact 3 Copper alloy / Tin plating

(2) Rear Cover PBT-GF10 (2) Rear Cover PBT-GF10

(3) Mat Seal Silicone Rubber (3) Mat Seal Silicone Rubber

(4) Socket Housing PBT-GF10 (4) Pin Housing PBT-GF10

(5) Radial Seal Silicone Rubber (5) Front Retainer PBT-GF10

(6) Front Retainer PBT-GF10

Note 3. Contacts are sold separately and are not integrated into connector at the time of delivery.
JAE Connector Div. Proprietary. Copyright © 2021, Japan Aviation Electronics Industry, Ltd. 2／6
 MB-0354-4

Part Numbers and Drawing Numbers

■Socket Connector / In-line Pin Connector

Number Socket Connector In-line Pin Connector

of
Part Number Drawing Part Number Drawing
Contacts
Number Number
MX80A02SZ1A SJ121265  MX80B02PZ1A SJ121264
MX80A02SZ1B 4 SJ121361 
2
MX80A02SZ1C 4 SJ121362 
3 MX80A03SZ1A SJ121229  MX80B03PZ1A SJ121228
4 MX80A04SZ1A SJ121382  MX80B04PZ1A SJ121381
Note 4. This product is different mating key type.

■Socket Contact

Part Number Drawing Number Applicable Wire

2
MX80S08K3F1 SJ121371 0.75 ~ 1.0mm wire (FLRY-A, FLRY-B,AESSX)
MX80S08K4F1 SJ121372 0.3 ~ 0.5mm2 wire (FLRY-A, FLRY-B, AESSX)
MX80S08K5F1 SJ121373 0.13 ~ 0.22mm2 wire (FLRY-A,FLCUSNRY)

■ Pin Contact

Part Number Drawing Number Applicable Wire

MX80P08K3F1 SJ121482 0.75 ~ 1.0mm2 wire (FLRY-A, FLRY-B, AESSX)
MX80P10K4F1 SJ121374 0.3 ~ 0.5mm2 wire (FLRY-A, FLRY-B, AESSX）
MX80P10K5F1 SJ121483 0.13 ~ 0.22mm2 wire (FLRY-A,FLCUSNRY)

■ Dummy plug

Part Number Drawing Number Applicable Connector

MX80A000XD1 SJ122489 All connector
Note 5. Dummy plug is used to seal off connector in case cavities are not plugged with
terminal wire.

JAE Connector Div. Proprietary. Copyright © 2021, Japan Aviation Electronics Industry, Ltd. 3／6
 MB-0354-4

Applicable Tools

Applicable Contact Tool Handling

Tool type Tool Part number
and Connector Instructions
CT150-19C-MX80 Contact for 0.75∼1.0mm2 wire T700459
Hand Crimp Tool CT150-19D-MX80 Contact for 0.3∼0.5mm2 wire T700460
2
CT150-19E-MX80 Contact for 0.13∼0.22mm wire T700461
Semi-automated
3502-MX80-2 All Contact T703574
Applicator
Contact ET-MX80S All Socket Connector T711250
Extraction Tool ETｰMX80P All In-line Pin Connector T711251
Retainer
RTｰMX80P All In-line Pin Connector T714405
Extraction Tool
In-line Pin Connector
Guide ATｰMX80P-1
（3 positions）
For Retainer (T714405)
In-line Pin Connector
Extraction Tool ATｰMX80P-2
（2,4 positions）
Note 6. For details on how to use each tool, refer to the tool handling instruction and
connector handling instruction.

Specification and Handling Instructions

Specification Connector Handling Instructions

JACS-11280-1 (USCAR-2) 7
JAHL-11280
JACS-11280-2 (LV214) 7

Note 7. There are some deviations to each specifications.

JAE Connector Div. Proprietary. Copyright © 2021, Japan Aviation Electronics Industry, Ltd. 4／6
 MB-0354-4

Outer Dimension

■ Socket Connector

Unit: mm
No. of
A B C *Below is 3 positions type
Contacts
2 8.9
3 11.45 9.1 18.7
4 14
B

A C

（After Retainer is assembled）

■In-line Pin Connector
Unit: mm
No. of *Below is 3 positions type
Contacts A B C

2 9.9 10.4
3 12.45 31.8
10.75
4 15
B

A C

JAE Connector Div. Proprietary. Copyright © 2021, Japan Aviation Electronics Industry, Ltd. 5／6
 MB-0354-4

Dimensions (when mated)

B

Unit: mm
Number
of A B C8 D
Contacts
2 9.9 10.4 Φ13.35
3 12.45 Φ14.75 33.6
10.75
4 15 Φ16.15
Note 8. The above dimensions are the target value for a circumscribed circle size.
Please note that each connector through-hole size is “C + 2mm”.

Notice:
1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice.
Contact our sales staff for further information before considering or ordering any of our products.
For purchase, a product specification must be agreed upon.
2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the
suitability of JAE's products to the equipment.
3. The products presented in this brochure are designed for the uses recommended below.
We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended
applications or for a specific use that requires an extremely high reliability.
(1) Applications that require consultation:
(i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry,
such as:
Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion
control, fire prevention or security systems, disaster prevention equipment, etc.
(ii) We may separately give you our support with a quality assurance program that
you specify, when you think of a use such as :
Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc.
(2) Recommended applications include:
Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home
electric appliances, factory automation equipment, etc.

* The specifications in this brochure are subject to change without notice. Please contact JAE for information.

JAE Connector Div. Proprietary. Copyright © 2021, Japan Aviation Electronics Industry, Ltd. 6／6