solids control equipment

Solids Control Components

 Solids Control Components

HS SHALE SHAKER TECHNOLOGY

Technical Parameters of the HS Model Shale Shaker
The design of our Shale Shaker was derived from observation and operation of similar products. It contains
three of our own patents, including two types of products: the linear and the flat elliptical. This shaker
features: high vibration intensity; large screen surface area; adjustable discharge angle during drilling; simple
compact structure; reliable, great performance at a competitive price!

Model HS280-3P HS240-3P HS220-3P

Electric power 2 × 3HP 2 × 3HP 2 × 3HP
Frequency 24.3 24.3 24.3
Explosion proof rate d II BT4 d II BT4 d II BT4
Mesh size(inch) 32.8 × 45.28 × 0.12 27.56 × 45.28 × 0.12 27.56 × 41.34 × 0.12
Shaking intensity（ g ） 7.2 7.2 7.2
Amplitude (inch) 0.23 0.23 0.23
Adjustable range 28° F∼ 43° F 28° F∼ 43° F 28° F ∼ 43° F
Weight 4762 lbs 4409 lbs 4189 lbs
Dimension (inch) 128 × 69 × 63 108 × 69 × 63 108 × 65 × 63

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

1
 Solids Control Components

Dimensions

All dimensions are in inches.

Model a b c d e f g
HS280-3P 109 69 67 124 79 33 44
HS240-3P 95 69 67 105 79 33 44
HS220-3P 92 65 110 110 76 33 44

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

2
 Solids Control Components

Technical parameters of the Mud Cleaner

The HM250x2/100x12 mud cleaner is an efficient solid-fluid processing design, which consists of a linear
shale shaker, desander with two 10” cones and a desilter with twelve 4” cones primarily used to eliminate
20-74 microns of sand and mud in the underflow.

Let our Solids Control technicians help improve your mud processing efficiency.

Model HM250× 2/100× 12

Parameters of the Desander Parameters of the Desilter
Cones 10 ” × 2sets Cone： 4 ” × 12sets
Pressure 36~45 psi Pressure： 36~45 psi
Capacity 88/g pm Capacity： 88/gpm
Separation 43~74 micro Sepa ration： 20~43 micro
Inlet Manifold 6” Inlet manifold： 6”
Discharge manifold 8” Discharge manifold： 8”
Model of the Shaker HS200-3P / HS240-3P / HS280-3P
Weight 5842 lbs/ 6063 lbs/ 6724 lbs
Dimension (inch) 108 × 69 × 92 / 129 × 69 × 92

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

3
 Solids Control Components

Use and technical parameters of the Vacuum Degasser

The HV Series Vacuum Degasser can quickly remove all kinds of entrained gas from the fluid. It is
indispensable equipment in gas wells, prospect wells and deep wells. It is also used with various kinds of
clean circulating systems for drilling. The gas-fluid separation structure of the HV Series degasser is well-
designed. It can ensure efficient separation and can filter raffles in order to make sure the smooth of the
blast pipe. This employs a water ring vacuum style degasser, and is used for degassing combustible gas and
explosive gas.

Model HV-240 HV-1200

Capacity 881~1057gpm 881~1057 gpm
Vacuum degree 5.4 ~ 6.8psi 7.3 ~ 9.7 psi
Efficiency ≥95% ≥95%
Main motor power 20 HP
Vacuum pump motor power 3 HP / 4 HP（60Hz） （60Hz）
4HP / 5.4HP
Inlet manifold 5“ 6“
Discharge manifold 6“ 8“
Weight 3968lbs 6173lbs
Dimension (inch) 75×35×87 87×47×49

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

4
 Solids Control Components

Uses and technical parameters of the Desander

The HD Desander is the second level of solids control drilling. The operation is mainly used to eliminate the
harmful 40-74 micron solid particles in the fluid.

Model HD-300 × 2
Hydrocyclone 12“ × 2 Sets
Pressure 29~65 psi
Capacity 1059 gpm
Screen Size 49” × 23”
Screen spec 150-200 mesh
Incoming manifold 6“
Discharge manifold 8“
Motor Power 0.67 HP
Weight 1653 lbs
Dimension (inch) 64×45×83

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

5
 Solids Control Components

Uses and technical parameters of the Desilter

The Desilter is mainly used to eliminate the 20-40 micron harmful solids in the mud. The urethane
hydrocyclones connect quickly. The Desilter is efficiently designed, easy to maintain and has a long working
life with stable performance.

Model HM-100 ×12

Hydrocyclones 4 “ × 12 Sets
Pressure 29~65 psi
Capacity 704-792 gpm
Screen size 49”×23”
Screen spec 150-200 mesh
Incoming manifold 6”
Discharge manifold 8 ”
Motor power 0.67 HP
Weight 1653 lbs
Dimension (inch) 78×45×82

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

6
 Solids Control Components

Use and technical parameters for TSC

Centrifugal Pumps
The TSC Centrifugal Pump is used to offer various discharge capacities and pressures for desanders,
mud cleaners, blenders and charge pump applications. HP 5X6 centrifugal pump is generally used as support
equipment for automatic drilling rigs. HP 3X4 centrifugal pump is mainly used for measuring tanks and is
generally named as Volume pump. HP 2X3 centrifugal pumps are used as prime movers for water tanks and
the cooling systems and are also called water pumps.

Model HP8× 6 HP6× 5 HP4× 3 HP3× 2

Discharge capacity 1057 gpm 881 gpm 264 gpm 220 gpm
Head 92~115 ft 92~108 ft 79~98 ft 79~98 ft
Efficiency 65% 65% 65% 65%
Power 60/74/101 HP 50/60 HP 15/20 HP 10/15 HP
RPM 1450/1750rpm 1450/1750rpm 1450/1150 rpm 1450/1150 rpm
Inlet diameter 8” 6” 4” 3”
Outlet diameter 6” 5” 3” 2”
Weight
Dimension (inch) 78×26×40 70×24×35 53×20×25 53×20×25

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

7
 Solids Control Components

Use and technical parameters for HPS Shear Pump

HPS Shear Pump is a new model of mud processing equipment. Its special impeller structure can offer a
high shearing efficiency. It can effectively mix and hydrate the material added in the mud in order to reduce
the use of mud material. This offers good mud performance for drilling.

Model HPS 6X5

Discharge capacity 528 gpm
Head 148 ft
Shearing efficiency 95%
Power 74 HP
RPM of the impeller 2200 rpm
Inlet diameter 6”
Outlet diameter 5”
Weight 2094 lbs
Dimension (inch) 50×30×43

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

8
 Solids Control Components

Use and technical parameters of the Mud Mixer/Hopper

The Cyclone Mud Mixer is used to efficiently mix treating fluid with the mud. It features good mixing
capability, fast feeding and is not easily jammed. The pressure is very high when the mud comes out and the
mud cannot escape up the funnel. The jet mixer has good mixing capability and feed rate. It is easier to jam
with a high feed escape up the funnel capacity. When the mud comes through the discharge nozzle, the
pressure is elevated but does not rise up the funnel. The shear effect is greater when the jet mixer is
used along with a shear pump.

Model HJ-250 HSH-200

Capacity 1145 ~1321 gpm 881 gpm
Inlet pressure 44∼87 psi 44∼87 psi
Outlet pressure ≤5.8 psi 14.5∼29 psi
Inlet diameter 6“ 6“
Outlet diameter 6“ 6“
Weight 1058 lbs 265 lbs
Dimension (inch) 58×28×43 54×30×38

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

9
 Solids Control Components

Use and technical parameters of the

TSC HA Mud Agitator
The agitator is an important part of the mud solids control system. It is mounted on the circulating tank. The
vanes of the agitator dip into the mud to agitate the mud uniformly.

Model HA-5.5 HA-7.5 HA-11 HA-15

Power 7.4 HP 10 HP 14.8 HP 20 HP
RPM of the Motor 1440/1750 rpm 1440/1750 rpm 1440/1750 rpm 1440/1750 rpm
RPM of the Impeller 58/70 rpm 58/70 rpm 58/70 rpm 58/70 rpm
Diameter of the impeller 600/550 mm 800/720 mm 1000/900 mm 1000/1100 mm
Weight 1168 lbs 1323 lbs 1440 lbs 1830 lbs
Dimension (inch) 41×30×24 46×30×26 51×32×28 53×32×28

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

10
 Solids Control Components

Uses and technical

parameters of the Liquid-Gas Separator
The Liquid-Gas Separator is specially designed for primary degassing of the drilling mud from invading
gases. This design features simple hydro-mechanical structure, easy transport, installation and maintenance,
large capacity and high degassing efficiency.

Model HYQ800/1000/1200-1 HYQ1000/1200-4

Capacity 1145/1321/1409 gpm 1321 gpm
Design pressure 145 psi 580 psi
Diameter of the sleeve 31.5”×39.4”×47.2” 39.4”×47.2”
Feeding pipe 10” 6“
Mud Discharge pipe 8“ 8“
Gas discharge pipe 8“ 8“
Weight 4630/6173/7275 lbs 18739/20944 lbs
63×63×2238
Dimension (inch) 79×79×253 91×91×256
87×87×257

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

11
 Solids Control Components

Drilling fluid circulation system

TSC’s modular design drilling fluid circulation system offers a wide variety of options for 3000 m, 4000 m, 5000 m,
7000 m, 9000 m, 12000 m land rig applications.

4320 Brittmoore Road, Houston, Texas 77041, U.S.A.

Toll Free: 1-866-8300-TSC, Phone: 1-713-896-8300, Fax: 1-713-896-6883, Email: [email protected]

12
 solids control equipment

TSC TSC

TSC
TSC TSC
TSC

TSC
TSC

4320 Brittmoore Road

Houston, Texas 77041, U.S.A.
Toll Free* 1-866-8300-TSC
Phone* 1-713-896-8300
Fax* 1-713-896-6883
Email* [email protected]
Http:// www.tscoffshore.com