Scribd
Upload
8 views

Design

Uploaded by

Bhumika Rai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
8 views

Design

Uploaded by

Bhumika Rai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 7
ANALYSIS OF DATA © carriage ways 5.5m © clean span of culvert = 4m © grade of concrete used M25 © Area of steel Fe 415 Step 1: calculate the depth of stab ‘Assume 90 mm thickness per meter length Therefore, D = 90x 4 = 360 mm Taking 12 mm dia. Bar, Effective depth = D - CC: dia. Of bars /2 = 360-40~12/2 314mm \i, Bearing width ( bw) calculation ‘According tol IRC- 6 2016) : 300 mm for span less than 3m 400 mm for span greater than 3m therefore, Bearing width by = 400 mm Effective length span ,As per (IRC-21 CI no. 305.4) Ielear span + day = 4.0 +0.314 = 4.314 m li) clear span + by = 4.0+4.0©4.4m therefore, Lar= 4.314m 3) CALCULATION OF LOADS : 1) Dead load (OL) = Ox comp, strength = 0.3625 = 9 KN/m Therefore, for 1. m=9KN/m Bending moment due to dead load, BMa = WU/8 =9X4.3147/8 =20.8 KNm Shear force due to dead load, S.Fac = Wha /2 9x4.314/2 =19.35 KN li) live load -{ Class A wheeled loading) taking highest axial load , load = 11.4 tones = 114 KN TT b = 250 mm (parallel) w=500 mm (perpendicular) width of dispersion parallel to slab, s tire contact area + 2(D + wearing coat ) 0.25 + (036+0)=0.79m For class A loading.If , c/c axial load /2

You might also like