Scribd
Upload
21 views

Engg Change Note

This document is an engineering change note from Suyesh Group that details changes to a part. It includes: 1) Information about the change such as the customer, part number, current and new revision dates. 2) A brief description of the changes. 3) A review of the feasibility and available stock. 4) Details of any necessary changes to documents, tooling, and inspection gauges/fixtures along with responsibilities and timelines. 5) Confirmation that process validation was completed if needed and that PPAP was submitted to the customer for approval by a certain date.

Uploaded by

Global Managements
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
21 views

Engg Change Note

This document is an engineering change note from Suyesh Group that details changes to a part. It includes: 1) Information about the change such as the customer, part number, current and new revision dates. 2) A brief description of the changes. 3) A review of the feasibility and available stock. 4) Details of any necessary changes to documents, tooling, and inspection gauges/fixtures along with responsibilities and timelines. 5) Confirmation that process validation was completed if needed and that PPAP was submitted to the customer for approval by a certain date.

Uploaded by

Global Managements
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Rec. Ref.

SGM/DEV/F/06
SUYESH GROUP Issue No./Date 01/01.08.2014
Rev. No./Date 00/01.08.2014
ENGINEERING CHANGE NOTE
Page 01 or 01
INTERNAL / EXTERNAL

Team Members Date of Review :


01 Change received on: 06 Reviewed on:
02 Customer Name: 07 Part Name:
03 Part Number: 08 Drawing Number:
04 Current Revision number & date: 09 New Revision Number & date:
05 Change Effective from: 10 Internal Drg. Number:
11. Brief Details of changes:
.

.
12. Feasibility Review:
.

13. Review of stock available at SUYESH GROUP:


.

.14. Communication of Stock to Customer(Date)

14. Are revised samples prepared and sent to customer? / Date

15. Is Customer Approval Received or Inhouse Process Validated?

.
A) CHANGE IN DOCUMENTS:
Sr. Documents to Brief details of changes to be made Responsibility & Follow-up details
No. be changed target date.
01 Drawings

02 Control plans

03 Work
instructions
04 Process
FMEA
05 PPAP
Rec. Ref. SGM/DEV/F/06
SUYESH GROUP Issue No./Date 01/01.08.2014
Rev. No./Date 00/01.08.2014
ENGINEERING CHANGE NOTE
Page 01 or 01
INTERNAL / EXTERNAL

B) CHANGE IN TOOLING.
Sr. Tooling to be Brief details of changes to be made Responsibility & Follow-up details
No. changed target date.
01
02
03
04
05
C) CHANGE IN INSPECTION GAUGES/FIXTURE
Sr. Gauge / Brief details of changes to be made Responsibility & Follow-up details
No. fixture to be target date.
changed
01
02
03

a) Is Process Validation Required – Yes / No, If Yes – Has is done – Yes or No.

Any Comments-

b) Is PPAP to be submitted to Customer – Yes / No , If Yes by When & Is Submitted & Approval
Obtained?
Comments-

c) CHANGE EFFECTIVE IMPLEMENTATION DATE –

Any Other Comments


Any other Remarks

Team member’s acknowledgement.

Sign

Dept. Customer
Engg. Mkt. Q.A. Tooling Supplier
Representative

You might also like