Scribd
Upload
32 views2 pages

Engdap1 FN Exam Studio

This document provides instructions for a final grading examination in studio for a School of Engineering and Architecture. Students are to complete an orthographic drawing using a scale of 1:100 meters, including an isometric section view. They will be evaluated on accuracy, neatness, legibility and clarity, workmanship quality, and speed/completeness in completing the required drawings. The evaluation criteria and point values for each are described.

Uploaded by

Kalabet peanut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views2 pages

Engdap1 FN Exam Studio

This document provides instructions for a final grading examination in studio for a School of Engineering and Architecture. Students are to complete an orthographic drawing using a scale of 1:100 meters, including an isometric section view. They will be evaluated on accuracy, neatness, legibility and clarity, workmanship quality, and speed/completeness in completing the required drawings. The evaluation criteria and point values for each are described.

Uploaded by

Kalabet peanut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SCORE

SCHOOL OF ENGINEERING AND ARCHITECTURE


General Luna Road, Baguio City Philippines 2600

100
ENGDAP1 – FINAL GRADING EXAMINATION (STUDIO)

Name: ____________________________________ Date: _______________________


Schedule: _________________________________ Instructor: Ar. Jenny N. Diwayan

A. GENERAL INSTRUCTIONS:
1. Read the instructions and questions carefully. (USE GINZA PAPER)
2. Accomplish the Title Block completely.
3. Reproduce the given images in ink.
4. DO NOT ERASE YOUR PENCIL GUIDELINES.

B. PLATE INSTRUCTIONS
1. Reproduce the given orthographic drawings using scale 1:100m.
2. Create your own section/cutting line through the plan to show your cutting plane.
*Take note of your line weights and line types.
3. Analyze the drawings and draft its ISOMETRIC SECTION VIEW.
4. Complete all labels and dimensions.

2nd Semester AY 2022-2023 Page 1 of 2


SCHOOL OF ENGINEERING AND ARCHITECTURE
General Luna Road, Baguio City Philippines 2600

BASIS OF GRADING: Your solution will be evaluated considering the following criteria.
DESCRIPTION 4 3 2 1
(76% – 100%) (51 - 75%) (25 – 50%) (0 -24%)
Advanced Proficient Basic Poor
Excellent Satisfactory Fair Unacceptable
Very Good Good Marginal Non-Compliance
Excellent Acceptable Borderline
Full Compliance

1. Accuracy (30 pts)


Conformity to the correct value or
standard of measurements and
requirements

2. Neatness (15 pts)


Conformity to acceptable levels of
cleanliness in plate submittals.

3. Legibility & Clarity


(15 pts)
Application of proper lettering
techniques, labels, dimensions,
annotations. Properly accomplished
title block.

4. Workmanship Quality
(30 pts)
Application of proper architectural
graphical presentation, e.g., line
weights, line types, line quality etc.

5. Speed/Completeness
(10 pts)
Submission of a complete drawing
plate at the end of the studio.

Prepared by: Ar. Jenny N. Diwayan Reviewed by: Ar./EnP. RYAN M. BENAOE
Instructor Program Chair

2nd Semester AY 2022-2023 Page 2 of 2

You might also like