BLE 5.

0 & Wi-Fi/ETH Gateway

Specification

BLE & WiFi Gateway Specification

Model: G1-C

Version: V3.2.1

Contents

Preface.......................................................................................................................................................................................... 2
1. Overview................................................................................................................................................................................... 3
2. Features.................................................................................................................................................................................... 4
3. Typical Application....................................................................................................................................................................4
4. Outside View............................................................................................................................................................................. 5
5. Electronic Parameters...............................................................................................................................................................6

Email: [email protected] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 1

 BLE 5.0 & Wi-Fi/ETH Gateway
Specification

Preface

This specification applies to G1-B,G1-C gateway.

Revision Date Author Description

v1.3.0 2018.01.12 Yancy Initial draft

1. Add the features of G1-C

v1.4.0 2018.08.25 Yancy
2. Describe the difference between G1-B and G1-C

v2.0.0 2019.06.22 Yancy 1.Update the top LED Strip Lights status

1.When the server is not connected, the status of the light can be
Justin configured
v3.0.0 2020.01.02 2.Support Proxy setting in MQTT
Hobart
3.Add TCP protocol

1. Add WIFI failover function

Justin 2. Remote control adds the getConfig command to get gateway

v3.1.3 2020.08.01
Hobart configuration information

3. Add BLE Settings to remote control command config or setConfig

1. Data can be saved in TF Data Card or Udisk even if

Eason
disconnected
v3.1.3 2020.11.15
2. Support AWS/Azure/ARM mBed IoT Cloud Platforms

3. Support WPA 2.0 Enterprise Encryption；802.1x auth

Eason The G1-C can directly resolve the broadcast data of S3&S4, the temp.&
V3.2.1 2020.12.1 humidity sensor and the gate magnetic sensor

Email: [email protected] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 2

 BLE 5.0 & Wi-Fi/ETH Gateway
Specification

1. Overview

G1 is a Bluetooth low energy (BLE) to Wi-Fi connectivity gateway without the uses of smartphones or
apps. The G1 gateway collects the data from iBeacon, Eddystone, BLE sensor and other BLE devices, and
then sends to the local server or remote cloud server by HTTP / MQTT/ TCP protocol over Wi-Fi /
Ethernet. The subsequent version G1 Gateway will also implement the connection with BLE devices. This
product is designed with a color lamp ring on the top. It can be fixed by sticker or screw thread.

Outside View

Internal Structure

Email: [email protected] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 3

 BLE 5.0 & Wi-Fi/ETH Gateway
Specification
2. Features

General:
● Data Saved in TF Data Card or Udisk, even if disconnected
● Support AWS/Azure/ARM mBed IoT Cloud Platforms
● Input with DC 5.0V, 1A, Micro-USB
● Firmware Upgraded by OTA
● Support HTTP(SSL/TLS)/MQTT(SSL/TLS & Proxy)/TCP
● Operating Temperature: -25℃ to 65℃
● Batch Configuration Tool Available

WIFI & Ethernet:

● CPU 575MHz 32-bit Application Processor
● 2T2R 2.4GHz with 300 Mbps PHY data rate,802.11b/g/n WiFi
● 2 USB 2.0 Host Connectors and 1 TF Card Slot
● 128 Mbyte 16-bit DDR2 RAM
● 16 Mbyte SPI NOR Flash
● RGB LED Strip as the Status Indicator
● OpenWrt, Linux Distribution for embedded Devices
● Support WiFi failover & Mult-Higher Level AP Configuration
● 10/100 Ethernet with 802.3af PoE
● Support WPA 2.0 Enterprise Encryption；802.1x auth

Bluetooth Low Energy:

● 64MHz 32-bit Processor
● Built-in Power Amplifier Chip to Precisely Scan BLE
● At Least Bluetooth 4.0(Only for BLE)

Difference between G1-B/G1-C:

Field G1-B(stop production) G1-C(available)

CPU mt7688(wifi) - nrf52832(BLE) mt7628(wifi) - nrf52832(BLE)
Wifi 1T1R 2.4GHz with 150Mbps 2T2R 2.4GHz with 300Mbps
concurrent scan 100+ packets per second 200+ packets per second

3. Typical Application

● iBeacon / Eddystone / other BLE device data receiver

● Asset tracking
● Access control management
● Advertisement promotion
● Indoor location and position
● Industrial automation

Email: [email protected] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 4

 BLE 5.0 & Wi-Fi/ETH Gateway
Specification

S1: Bluetooth temperature & humidity sensor E2: 300 to 500 meters MaxBeacon
E6: Bluetooth ambient light sensor i3: Waterproof iBeacon & Eddystone
i7 : Bluetooth accelerometer sensor C7: Credit card beacon with RFID/NFC
G1: Bluetooth & WiFi gateway

4. Outside View

G1-B/C

Sign & Slots Feature Description

ON/OFF Power On / Off device
Reset Factory reset or close/open AP or hide/unhide AP
RJ-45 10/100Mbps Ethernet, 802.3af PoE
USB 2pcs external USB 2.0 slot
IN Micro-USB, power input (5.0V DC, 1A)
TF TF card slot

Email: [email protected] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 5

 BLE 5.0 & Wi-Fi/ETH Gateway
Specification

The meaning of the top LED Strip Lights status is as follows:

Status Description
Static LED Strip Lights Indicates that the gateway is staring
Dynamic white light rotation Indicates that the gateway has been started
Indicates that the gateway is not connected to the server
Dynamic LED Strip Lights
can be configured as a single color of red, yellow and white
rotation(Configurable)
and adjust the brightness
Indicates that the gateway is already connected to the server
(Note: The gateway is in the dynamic breathing lights by
Dynamic breathing lights default, it can step into the energy-saving mode on minute
after extinction of lights, you also can set up bright mode in
the configuration page if rich enough)
Indicates that the gateway is not power or in energy-saving
LED Strip Lights go out
mode
1. Indicates that the U disk has been identified to gateway;
2. It will be displayed when the U disk is inserted for thefirst
time or when the U disk is detected on the boot;
Fast green flash(introduced
3. If you do not see the green flashing state within 15 secon
since v2.0.0)
ds after inserting the U disk, it may be due to poor contact,
please change another USB port and check whether the USB
device is damaged.
1. Indicates that the gateway is reading or writing data toU
disk;
2. When the gateway reads and writes data to the U disk, it
Fast yellow flash(introduced
will display;
since v2.0.0)
3. Do not force the U disk to be unplugged when the yellow
flash is displayed. Such behavior may damage the filesystem
of the U disk.

5. Electronic Parameters

General Information
Color White
Size 150x150x36mm
Net Weight 180g
Accessory 1x USB cable, mental fixing and screws

Absolute Maximum Rating

Email: [email protected] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 6

 BLE 5.0 & Wi-Fi/ETH Gateway
Specification

Power supply (Vcc) Max. 5.5 Volts, DC

Storage temperature -40℃ to 85℃
Voltage ripple +/- 2%

Operation Condition (Recommendable)

Operating temperature -25℃ to 65℃
Humidity Max 95%, Non condensing, relative humidity
Power supply (Vcc) DC 5.0 (+/- 5%)

Current Consumption
290mA (Wi-Fi only)
Powered by Micro-USB
330mA (LED strip and Wi-Fi works in the same time)
300mA (Wi-Fi only)
Powered by PoE
340mA (LED strip and Wi-Fi works in the same time)

Wi-Fi RF Performance
Wireless IEEE 802.11b/g/n (single stream)
Network modes Router, Repeater
IEEE 802.11b, 1-11Mbps
Data rate IEEE 802.11g, 6-54Mbps
IEEE 802.11n(2.4GHz), 7.2-72.2 Mbps
Frequency band 2.400 – 2.484 GHz
Number of selectable Sub
14 channels
channels
Channel Bandwidth 20 MHz
Modulation OFDM, DSSS, DBPSK,DQPSK, CCK , 16 / 64QAM
- 10dBm (with PER < 8%@11 Mbps)
Maximum receive input level - 20dBm (with PER < 10%@54 Mbps)
- 20dBm (with PER < 10%@MCS7)
- 87dBm (typ. with PER < 8%@11 Mbps)
Minimum receive input level - 70dBm (typ. with PER < 10%@54 Mbps)
- 70dBm (typ. with PER < 10%@MCS7)
17dBm (typical)@ 802.11b
Transmit Power 11.3dBm (typical)@ 802.11g
8.2dBm (typical)@ 802.11n
Carrier Frequency Accuracy +/- 20ppm (crystal: 16MHz +/-10ppm in 25℃)
Antenna 3dBi flexible FPC antenna
Range up to 90 meters( in open space)
Security WPA / WPA2 PSK

Email: [email protected] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 7

 BLE 5.0 & Wi-Fi/ETH Gateway
Specification

BLE RF Performance
RF Power Accuracy +/- 4 dB
-108 dBm @250kbps, 0.1% BER
Receiver Sensibility
-93 dBm @1Mbps, 0.1 %BER
Maximum Received Signal
0dBm
Strength at <0.1% PER
Frequency Deviation +/-250 kHz @BLE
Antenna Flexible FPC antenna
Scanning & concurrently
300 BLE packets per second
process
Range up to 300 meters in open space

<END>

Email: [email protected] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 8