Scribd
Upload
31 views

C Series Wiper Systems

This document describes wiper systems for telescopic steel covers. It discusses specialized wiper solutions for limited space or high chip volumes. It then provides details on different wiper series - eN, C, CL1, C2, C3, C5, and C6 - outlining their key features such as replaceable wiper lips, space requirements, rigidity, and damping options.

Uploaded by

Janaka Chathuranga
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

C Series Wiper Systems

This document describes wiper systems for telescopic steel covers. It discusses specialized wiper solutions for limited space or high chip volumes. It then provides details on different wiper series - eN, C, CL1, C2, C3, C5, and C6 - outlining their key features such as replaceable wiper lips, space requirements, rigidity, and damping options.

Uploaded by

Janaka Chathuranga
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WIPER SYSTEMS

for telescopic steel covers

Wiper systems specially developed for telescopic steel covers. For particular requirements such as limited space for mounting

or use in the presence of high volumes of chips produced, we also offer suitable solutions.

█ wiper lip █ profile support █ sheet metal box █ damping material █ profile support

eN SERIES
eN1
8 7

⃝ Used on telescopic steel covers for slideways with small cross-sections

⃝ Wiper lip vulcanized to a flat steel profile 2.5

⃝ Highly wear-resistant polyurethane lip, resistant to oil, coolants


and microbes eN2

12 6
⃝ Standard length of the eN way wiper: 500 mm

See page 60 for more information


3.5

C SERIES
⃝ Same design for all types of C wipers (except CL1)

⃝ Highly wear-resistant polyurethane lips ensuring optimum resistance


to water, coolants, chemicals and oil

CL1
⃝ Usable for large surfaces and aluminum apron systems for
manifold applications 12
12
⃝ Optimum wiping effect. Will wipe uneven surfaces up to 4 mm

⃝ Highly durable and resistance against all common coolants


5.5
⃝ Exchangeable and suitable for all profiles of series C2, 3, 5 and 6
(Illustration: CL1 with C5 profile)

15
C2
⃝ Smallest wiper of the “C” series with damping

⃝ Replaceable wiper lips 6


13
⃝ Very little space required (regarding the mounting height and depth) 8

⃝ Also available with a rubber profile vulcanized on the profiled support, 3.5
for optimum damping properties at high traverse speeds
(illustration: C2 with damping)
without damping

C3
with damping
⃝ Wider profile to ensure a better adhesion when
spot-welding it to the box
18 6
⃝ Replaceable wiper lips 12

⃝ Very little space (mounting height) required


3.5
⃝ Can be screwed onto the cover box

⃝ Optimum rigidity of the cover box in the wiper area

⃝ Available with and without damping without damping

⃝ Assembly dimension with damping 18mm

C5 with damping

⃝ Designed for large covers


18
⃝ Replaceable wiper lips 12
6
⃝ A combination of C5 and C3 wipers is possible

⃝ Optimum rigidity of the cover box in the wiper area


5
⃝ Enlarged return gutter to ensure a rapid draining of the coolant

⃝ Available with and without damping (illustration: C5 with damping)


without damping

C6
⃝ Can be replaced directly on the machine without disassembling the cover

⃝ Time saving and cost-effective with damping

⃝ Enlarged return gutter to ensure a rapid draining of the coolant without damping
20
⃝ Available with and without damping (illustration: C6 with damping)
14
6
⃝ Replaceable profile (shown in blue) is fixed with spring clamps

⃝ Solid profile support (shown in red) is welded with the box plate and 5
remains on the cover

16

You might also like