RBE quick-release couplings

All fluids | Modular range

The right
solution...
... for all of your applications
Modularity The speed and simplicity of push-
The comprehensive, fully modular RBE button technology
Applications
range for all fluids offers a choice of Connected and disconnected with one
■■ Gas: hydrogen, argon,
5 coupling sizes, 3 types of construction, hand for greater ease of use:
nitrogen, helium…
7 seal materials, 3 shut-offs, and numerous ■■ Connected by pushing the plug directly
■■ Steam
options. into the socket.
■■ Solvents
It means that you can put together the right ■■ Disconnected by pressing the locking
■■ Liquids
quick-release coupling for your application button.
■■ High pressure
depending on the fluid characteristics
■■ Process vacuum...
(type, pressure, temperature) and the
In all industrial and research
required flow rate.
sectors.

Lasting Stäubli tightness

proven by over 50 years of industrial To meet the specific requi-
Optimum safety
connections for fluids. rements of some industries,
through the design of the product, the
the RBE range also includes
quality of the materials used and the right
Tried and tested reliability and quick-release couplings:
seal type for the fluid being transported.
efficiency ■■ For heavy iron and steel
This aspect is particularly important in
The technology behind Stäubli couplings applications involving oxygen,
circuits carrying corrosive gases and
gives long service life at the lowest flammable gases and neutral
liquids.
possible operating cost. gases (RBE11/UR).
■■ For nuclear remote handling
Efficiency
(see leaflet RG100).
RBE couplings for all fluids are highly
efficient, giving optimum flow.

RBE quick-release couplings   3

Five key steps to determine the
right quick-release coupling for
your application

5
1 3 4

1 Diameter (p.5)
5 coupling diameters available: 03 / 06 / 08 / 11 or 19 mm

2 Construction (p.5)
Low and medium pressure / high pressure or process vacuum

3 Seals (p. 6-7 )

7 grades available: Nitrile / Fluorocarbon / Ethylene-Propylene / Perfluoroelastomer /Fluorosilicone / Chloroprene / PTFE

4 Shut-off (p. 7)
3 options: single / double or none (full flow)

5 Options (p. 8-9)

6 available: safety keys / coloured disks for recessed couplings / raised push-button lock / safety lock / dust guard / cap fixing

4   RBE quick-release couplings

 1 Flow diameter
5 coupling sizes: nominal Ø of 03, 06, 08, 11 or 19 mm.

2 Construction *
The type of construction selected depends on the fluid carried, the maximum operating pressure and the external environment.

Low and medium pressure

Air, various gases, oils, hydrocarbons... Water, air, various gases, oils, Various corrosive gases, sea water, a
with no specific corrosion resistance hydrocarbons... large number of chemicals... in a corrosive
requirements. atmosphere.
Max. working pressure: 50 bar Max. working pressure: 50 bar Max. working pressure: 15 bar

Mainly stainless steel with 17% chrome. Mainly stainless steel with 17% chrome Mainly stainless steel 316 series
Socket end connection: anti-corrosion
treated steel
As standard: no code Code IA Code IC
(IA/BF: without brass)

High pressure
High pressure liquids. High pressure gases. High pressure liquids and gases, with
specific decontamination and corrosion
resistance requirements.
Max. working pressure: up to 450 bar Max. working pressure: up to 450 bar Max. working pressure: up to 450 bar
depending on diameter and material series depending on diameter and material series depending on diameter and material series
Plug body and lock: high strength Plug body and lock: high strength
stainless steel stainless steel
stainless steel with 17% chrome and stainless steel with 17% chrome and Mainly stainless steel 316 series
stainless steel 316 series stainless steel 316 series
Code IA/HPL Code IA / HPG Code IC / HPI

Process vacuum
Recommended for a process vacuum up to 10 –3 torr and for all applications requiring a high degree of tightness.
Vacuum tightness: 1.10 –3 N.cm3/s. in connected and disconnected position.
For even more stringent requirements, please ask us.
Internal parts: mainly stainless steel 316 series
* All springs are in stainless steel with 18%
Code IA/W
chrome.

For optimum performance, sockets and plugs with the same construction
must be used.

Socket Full flow plug Auto shut-off plug For hydraulic applications, use our
standard standard standard or IA
flat-face SPX couplings (see leaflet
IA standard IA
IC IC IC
RF125).
IA / HPL HPL IA / HPL For hydraulic circuits with pulsating
IA / HPG HPG IA / HPG
or vibrating flow, use our HPX quick-
IC / HPI IC / HPI IC / HPI
release couplings (see leaflet RF150).
IA / W standard IA / W
IC / W IC IC / W

RBE quick-release couplings   5

 3 Seals
The seal material selected depends on the fluid carried, the working temperature and the maximum working pressure.

Minimum and maximum

Material Code Applications
allowable temperatures TS (°C)
Nitrile (NBR) standard -15 and +100 ■■ General applications
■■ High mechanical strength

Fluorocarbon (FPM) JV -10 and +200 ■■ Good chemical resistance

■■ Outstanding resistance to high temperatures up to 200 °C
■■ Resistance to mineral oils, synthetic hydraulic oils, fuels,
chemicals, hydrocarbons and coolants

Ethylene-propylene (EPDM) JE -20 and +150 ■■ Excellent resistance to high temperatures

■■ Compatible with phosphate-based brake fluids - esters,
hot and cold water, steam

Perfluoroelastomer (FFKM) JK 0 and +250 ■■ Combines the qualities of an elastomer with the chemical
resistance of PTFE
■■ Remarkable resistance to heat and most chemical agents
■■ Coolants

Fluorosilicone (FMQ) JS3 -45 and +175 ■■ Max. working pressure: 50 bar
■■ Good resistance to low and high temperatures
■■ Resistance to mineral oils, fuels

PTFE (not available on 3 JT* -50 and +200 ■■ Max. working pressure: 80 bar
and 8 mm diameters) ■■ Excellent chemical resistance
■■ Very good resistance to low and high temperatures
■■ Superior performance to elastomers.

Chloroprene (CR) JC -40 and +100 ■■ Good resistance to ageing and refrigerants

* Only available on IA and IC auto-shut-off sockets et plugs.

Full flow plugs: add code /JT to the selected part-number.

To design the best solution for your application, we recommend that Please do not hesitate to contact our technician for
you give us the following information: advice.
■■ type of fluid Our experience as a quick-release coupling specialist is
■■ pressure at your disposal.
■■ temperature
■■ concentration of salts and acids in aqueous solutions
■■ specific operating conditions

KES sealing kit

KES sealing kits consist of a retaining ring and an Select the ring and seal materials depending on your
O-ring to create a perfect seal between the socket application, using our new documentation RP003.
or the plug and its holder. Part-numbers that are
compatible with this option are indicated by the
symbol in the part-number tables on p. 14 to 25. KES sealing-kits

All fluids

KES sealing kits must be ordered separately.

6   RBE quick-release couplings

4 Shut-off
Single shut-off

Recommended for:
■■ Non-aggressive fluids
■■ Non-polluting products
■■ Non-hazardous gases
■■ Applications requiring decompression
of the downstream line
Socket with automatic shut-off
Full flow plug

Socket: standard
Plug: full flow

Double shut-off

Recommended for:
■■ Low and high pressure oil circuits
■■ Hazardous, aggressive or polluting
gases or products
■■ Minimising spillage

Socket and plug with automatic shut-off

Socket: code OD
Plug: shut-off valve

No shut-off (full flow)

Recommended for:
■■ Non-aggressive fluids
■■ Slurries
■■ Salt water, lime water or untreated
mains water
■■ Non-polluting products
■■ Non-hazardous gases
Full flow socket and plug
■■ Gives a higher flow rate for the same
flow diameter
Socket: code OS
Plug: full flow

RBE quick-release couplings   7

 5 Options
7 safety keys

They prevent any mistaken connection of different gases or liquids and enable methodical identification of circuits.

 M
 echanical interlock
2 grooves machined into the plug (key) line up with two stubs on the socket (key).

 V
 isual identification
by coloured marks on the plug and socket.

Yellow 180° Code 0 Blue 120° Code 6

Purple 165° Code 15* Brown 105° Code 75 *

Red 150° Code 3 Black 90° Code 9

Green 135° Code 45 * Safety keys unavailable on all diameters: consult us

 S
 afety keys also available on recessed couplings:
by coloured marks on the plug and socket.

■■ Standard and IA construction: ■■ IC construction: ■■ For heavy iron and steel

disc supplied as standard in the grey disc as standard, but a disc that applications involving gases
colour of the key. matches the colour of the key only we also offer the RBE 11/UR quick-
can be ordered, specifying the colour release couplings with stud safety
code in the part-number (see below). keys.

Coloured disks for recessed couplings

For immediate visual identification of circuits.

Yellow code DKJ Blue code DKB

Purple code DKW Brown code DKM

Red code DKR Black code DKN

Green code DKV

8   RBE quick-release couplings

Safety lock  Raised push-button lock Dust guard

Code VS Code VD Code VD / PP

To unlock: Recommended for frequent unlocking or When coupled, the chloroprene (CR)
■■ push back the cover if protective gloves are worn. guard protects the working parts of the
■■ press the lock coupling against the ingress of dust and
Not available on IC construction and not other matter.
available on RBE 03. Must be fitted with raised push-button
lock, code VD.
Minimum and maximum allowable
temperatures TS (°C): -20 and +100
Fixing for protective cap
Not available on RBE 03.

Code FB

Protective cap to be ordered separately:

see page 27.

Other options are also available: please ask us:

■■ DG: degreasing of metal components.
■■ PE: electropolishing for stainless steel components.
■■ OX: product prepared for use of oxygen.
■■ FDA: product prepared for compliance with FDA requirement.
■■ USP: product prepared for compliance with USP requirement.

RBE quick-release couplings   9

Technical data

RBE 03 RBE 06 RBE 08 RBE 11 RBE 19

Nominal diameter DN (mm) 3 5.5 8 11 19
Flow area (mm2) 7 23.75 50 95 283

Maximum allowable pressure PS (bar)

RBE coupling series standard IA IA/HPL IA /HPG IC IC /HPI

RBE 03 50 16(1) 50 16(1) 400 400 15(2) 400
RBE 06 50 16(1) 50 16(1) 450 450 15(2) 450
RBE 08 50 16(1) 50 16(1) 400 400 15(2) 400
RBE 11 50 16 (1)
50 16 (1)
350 350 15 (2)
350
RBE 19 50 16(1) 50 16(1) 300 300 15(2) 300

(1) Connection for rubber hose and ear clamp or jubilee clip assembly: pressure up to 16 bar.
(2) For higher pressures, please refer to our RBL documentation.
For hazardous gases as defined in Directive 2014/68/EU, please ask us for the maximum allowable pressure PS.

Hydraulic flow rate in l/min at a velocity of 5 m/s

RBE 03 RBE 06 RBE 08 RBE 11 RBE 19

Single shut-off 2.1 7.2 15.1 28.5 85
Double shut-off 1.5 5 12.2 24.8 76
No shut-off (full flow) 2.1 7.2 15.1 28.5 85

Pneumatic flow rate in Nm3/h for inlet pressure of 6 bar, pressure drop of 0.3 bar and temperature of 10 °C

RBE 03 RBE 06 RBE 08 RBE 11 RBE 19

Single shut-off 11 35 70 140 450
Double shut-off 6.5 18 45 90 240
No shut-off (full flow) 13 42 110 210 600

1 0   RBE quick-release couplings

Flow rate/pressure drop hydraulic charts

Test conditions: 3D models and sizing

■■ Fluid: water plans are available on
■■ Direction of flow: socket plug request

RBE quick-release couplings   1 1

How to create your socket
part-number
"Standard" part-number Additional options

§ Socket RBE XX.XXXX / IA. / .JE. / .OD. / 15 / VD / PP / FB

1 Standard socket
( p. 14-16-19-22-24 )
Seals: nitrile (NBR)
Shut-off: single
No special option

2 Construction ( p. 5 )

Low and medium pressure: IA - IA/BF - IC
High pressure: IA/HPL - IA/HPG - IC/HPI
Process vacuum: IA/W

3 Seal grades other than Nitrile ( p. 6-7)

JV - JE - JK - JS3 - JC - JT

4 Shut-off ( p. 7 )

OD - OS

5 Options ( p. 8-9 )

■■ Safety keys ■■ Lock
Stubs Code Raised push-button.......................................... VD
Yellow 180° 0 Safety (only available on standard
Purple 165° 15* and IA series, excluding 3 mm diameter)
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VS
Red 150° 3
135° 45 ■■ Dust guard
Green
Blue 120° 6 (not available on 3 mm diameter)
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VD/PP
Brown 105° 75*
90° 9 ■■ Cap fixing
Black .......................................................................... FB
* Safety keys unavailable on all diameters: consult us

1 2   RBE quick-release couplings

How to create your plug
part-number
"Standard" part-number Additional options

§ Full flow plug RBE XX.XXXX / IC/HPI. / 15

§ Auto shut-off plug RBE XX.XXXX / .IA. / .JE. / 15

(with socket code OD only)
Supplied with chloroprene (CR)
protective cap

1 Standard plug
( p. 15-17-18-20-21-23-25 )
No special option
No code

2 Construction ( p. 5 )

for full flow plug
Low and medium pressure: IC
2 Construction ( p. 5 )
High pressure: HPL - HPG - IC/HPI for auto shut-off plug
Low and medium pressure: IA - IA/BF - IC
High pressure: IA/HPL - IA/HPG - IC/HPI
Process vacuum: IA/W

3 Seal grades other than nitrile for auto shut-off plug ( p. 6-7 )
JV - JE - JK - JS3 - JC - JT

5 Options ( p. 8-9 )

■■ Safety keys
Stubs Code
Yellow 180° 0
Purple 165° 15*
Red 150° 3
Green 135° 45
Blue 120° 6
Brown 105° 75*
Black 90° 9 * Safety keys unavailable on all diameters: consult us

RBE quick-release couplings   1 3

Part-numbers
RBE 03
Standard sockets Panel mounted sockets

IA dard

IC PG
IA/ PL

I
HP
n

H
H
Sta

IC/
IA/
End connection Part-numbers Part-numbers
Female thread
G 1/8 RBE 03.1100 ■ ■ ■ ■ ■ ■ RBE 03.2100
NPT 1/8 RBE 03.1200 ■ ■ ■ ■ ■ ■ RBE 03.2200
NPT 1/4 RBE 03.1201 ■ ■ ■ ■ ■ ■
UN 7/16 - 20 * RBE 03.1311 ■ ■ ■ ■ ■ ■
* as per SAE J 1926

Male thread
G 1/8 RBE 03.1150 ■ ■ ■ ■ ■ ■ RBE 03.2150
G 1/4 RBE 03.1151 ■ ■ ■ ■ ■ ■ RBE 03.2151
NPT 1/8 RBE 03.1250 ■ ■ ■ ■ ■ ■ RBE 03.2250
NPT 1/4 RBE 03.1251 ■ ■ ■ ■ ■ ■ RBE 03.2251

For rubber hose

Ø 4 mm RBE 03.1804 ■ ■ ■ RBE 03.2804
Ø 6 mm RBE 03.1806 ■ ■ ■ RBE 03.2806

For plastic pipe

Ø 4/6 mm RBE 03.1904 ■ ■ ■ RBE 03.2904
Ø 6/8 mm RBE 03.1906 ■ ■ ■ RBE 03.2906

For copper pipe

Ø 4/6 mm RBE 03.1704 ■ RBE 03.2704
Ø 6/8 mm RBE 03.1706 ■ RBE 03.2706

For calibrated stainless steel pipe* (double ring union) compliant with ISO 1127 class D4 and ASTM A 269 class 1 (installation instructions RV1300100)
ext. Ø 6 mm RBE 03.1766 ■ ■ ■ ■ ■ RBE 03.2766
ext. Ø 8 mm RBE 03.1768 ■ ■ ■ ■ ■ RBE 03.2768
ext. Ø 1/4" RBE 03.1753 ■ ■ ■ ■ ■ RBE 03.2753

Clamp profile pursuant to ISO 2852 and DIN 32676

Ø 25 mm RBE 03.1025 ■
Ø 34 mm RBE 03.1034 ■
Ø 50 mm RBE 03.1050 ■

1 4   RBE quick-release couplings

Part-numbers
RBE 03
Full flow plugs Auto shut-off plugs
supplied with chloroprene (CR)
protective cap (see p. 27)

HP dard

IC PG
IA/ PL

I
HP
n

H
H
L
Sta

IC/
HP

IA/
End connection Part-numbers End connection Part-numbers

IA
Female thread
G 1/8 RBE 03.6100 ■ ■ ■ ■ ■
NPT 1/8 RBE 03.6200 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ G 1/8 RBE 03.7100
■ ■ ■ ■ ■ ■ NPT 1/8 RBE 03.7200
* as per SAE J 1926 ■ ■ ■ ■ ■ ■ UN 7/16 - 20 * RBE 03.7311

Male thread
G 1/8 RBE 03.6150 ■ ■ ■ ■ ■
G 1/4 RBE 03.6151 ■ ■ ■ ■ ■
NPT 1/8 RBE 03.6250 ■ ■ ■ ■ ■
NPT 1/4 RBE 03.6251 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ G 1/8 RBE 03.7150
■ ■ ■ ■ ■ ■ G 1/4 RBE 03.7151
■ ■ ■ ■ ■ ■ NPT 1/8 RBE 03.7250
■ ■ ■ ■ ■ ■ NPT 1/4 RBE 03.7251
For rubber hose
Ø 4 mm RBE 03.6804 ■ ■
Ø 6 mm RBE 03.6806 ■ ■
■ ■ ■ Ø 4 mm RBE 03.7804
■ ■ ■ Ø 6 mm RBE 03.7806

For plastic pipe

Ø 4/6 mm RBE 03.6904 ■ ■
Ø 6/8 mm RBE 03.6906 ■ ■
Ø 8/10 mm RBE 03.6908 ■
■ ■ ■ Ø 4/6 mm RBE 03.7904
■ ■ ■ Ø 6/8 mm RBE 03.7906
■ Ø 8/10 mm RBE 03.7908
For copper pipe
Ø 4/6 mm RBE 03.6704 ■ ■
Ø 6/8 mm RBE 03.6706 ■ ■
■ ■ ■ Ø 4/6 mm RBE 03.7704
■ ■ ■ Ø 6/8 mm RBE 03.7706

For calibrated stainless steel pipe* (double ring union) compliant with ISO 1127 class D4 and ASTM A 269 class 1 (installation instructions RV1300100)
ext. Ø 6 mm RBE 03.6766 ■ ■ ■ ■ ■
ext. Ø 8 mm RBE 03.6768 ■ ■ ■ ■ ■
ext. Ø 1/4" RBE 03.6753 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ext. Ø 6 mm RBE 03.7766
■ ■ ■ ■ ■ ext. Ø 8 mm RBE 03.7768
■ ■ ■ ■ ■ ext. Ø 1/4" RBE 03.7753

Clamp profile pursuant to ISO 2852 and DIN 32676

Ø 25 mm RBE 03.6025 ■ Ø 25 mm RBE 03.7025
Ø 34 mm RBE 03.6034 ■ Ø 34 mm RBE 03.7034
Ø 50 mm RBE 03.6050 ■ Ø 50 mm RBE 03.7050

■■ Protective caps and manifolds: see p. 26-27.

RBE quick-release couplings   1 5

Part-numbers
RBE 06
Standard sockets Panel mounted sockets

IA dard

IC PG
IA/ PL

I
HP
n

H
H
Sta

IC/
IA/
End connection Part-numbers Part-numbers
Female thread
G 1/8 RBE 06.1100 ■ ■ ■ ■ ■ ■ RBE 06.2100
G 1/4 RBE 06.1101 ■ ■ ■ ■ ■ ■ RBE 06.2101
G 3/8 RBE 06.1102 ■ ■ ■ ■ ■ ■ RBE 06.2102
G 1/2 RBE 06.1103 ■ ■ ■ ■ ■ ■ RBE 06.2103
Rc 1/4 RBE 06.1111 ■ ■ ■ ■ ■ ■ RBE 06.2111
NPT 1/8 RBE 06.1200 ■ ■ ■ ■ ■ ■ RBE 03.2200
NPT 1/4 RBE 06.1201 ■ ■ ■ ■ ■ ■ RBE 06.2201
NPT 3/8 RBE 06.1202 ■ ■ ■ ■ ■ ■ RBE 06.2202
NPT 1/2 RBE 06.1203 ■ ■ ■ ■ ■ ■ RBE 06.2203
* as per SAE J 1926 UN 9/16 - 18 * RBE 06.1314 ■ ■ ■ ■ ■ ■ RBE 06.2314
Male thread
G 1/8 RBE 06.1150 ■ ■ ■ ■ ■ ■ RBE 06.2150
G 1/4 RBE 06.1151 ■ ■ ■ ■ ■ ■ RBE 06.2151
G 3/8 RBE 06.1152 ■ ■ ■ ■ ■ ■ RBE 06.2152
G 1/2 RBE 06.1153 ■ ■ ■ ■ ■ ■ RBE 06.2153
NPT 1/8 RBE 06.1250 ■ ■ ■ ■ ■ ■ RBE 06.2250
NPT 1/4 RBE 06.1251 ■ ■ ■ ■ ■ ■ RBE 06.2251
NPT 3/8 RBE 06.1252 ■ ■ ■ ■ ■ ■ RBE 06.2252
NPT 1/2 RBE 06.1253 ■ ■ ■ ■ ■ ■ RBE 06.2253
For rubber hose
Ø 6 mm RBE 06.1806 ■ ■ ■ RBE 06.2806
Ø 8 mm RBE 06.1808 ■ ■ ■ RBE 06.2808
Ø 10 mm RBE 06.1810 ■ ■ ■ RBE 06.2810
Ø 13 mm RBE 06.1813 ■ ■ ■ RBE 06.2813

For plastic pipe

Ø 6/8 mm RBE 06.1906 ■ ■ ■ RBE 06.2906
Ø 8/10 mm RBE 06.1908 ■ ■ ■ RBE 06.2908

For copper pipe

Ø 6/8 mm RBE 06.1706 ■ ■ RBE 06.2706
Ø 8/10 mm RBE 06.1708 ■ ■ RBE 06.2708

For calibrated stainless steel pipe* (double ring union) compliant with ISO 1127 class D4 and ASTM A 269 class 1 (installation instructions RV1300100)
ext. Ø 6 mm RBE 06.1766 ■ ■ ■ ■ ■ RBE 06.2766
ext. Ø 8 mm RBE 06.1768 ■ ■ ■ ■ ■ RBE 06.2768
ext. Ø 10 mm RBE 06.1770 ■ ■ ■ ■ ■ RBE 06.2770
ext. Ø 1/4" RBE 06.1753 ■ ■ ■ ■ ■ RBE 06.2753
ext. Ø 3/8" RBE 06.1755 ■ ■ ■ ■ ■ RBE 06.2755
ext. Ø 1/2" RBE 06.1756 ■ ■ ■ ■ ■ RBE 06.2756

Clamp profile pursuant to ISO 2852 and DIN 32676

Ø 25 mm RBE 06.1025 ■
Ø 34 mm RBE 06.1034 ■
Ø 50 mm RBE 06.1050 ■

1 6   RBE quick-release couplings

Part-numbers
RBE 06
Full flow plugs Auto shut-off plugs
supplied with chloroprene (CR)
protective cap (see p. 27)

HP dard

IC PG
IA/ L

I
HP
HP
n

H
L
Sta

IC/
HP

IA/
End connection Part-numbers End connection Part-numbers

IA
Female thread
G 1/8 RBE 06.6100 ■ ■ ■ ■ ■
G 1/4 RBE 06.6101 ■ ■ ■ ■ ■
G 3/8 RBE 06.6102 ■ ■ ■ ■ ■
NPT 1/8 RBE 06.6200 ■ ■ ■ ■ ■
NPT 1/4 RBE 06.6201 ■ ■ ■ ■ ■
NPT 3/8 RBE 06.6202 ■ ■ ■ ■ ■
M 14 x 125 RBE 06.6314 ■
UN 9/16 - 20 RBE 06.6315 ■
■ ■ ■ ■ ■ ■ G 1/8 RBE 06.7100
■ ■ ■ ■ ■ ■ G 1/4 RBE 06.7101
■ ■ ■ ■ ■ ■ G 3/8 RBE 06.7102
■ ■ ■ ■ ■ ■ Rc 1/4 RBE 06.7111
■ ■ ■ ■ ■ ■ NPT 1/8 RBE 06.7200
■ ■ ■ ■ ■ ■ NPT 1/4 RBE 06.7201
■ ■ ■ ■ ■ ■ NPT 3/8 RBE 06.7202
■ ■ ■ ■ ■ UN 9/16 - 18 * RBE 06.7314 * as per SAE J 1926
Male thread
G 1/8 RBE 06.6150 ■ ■ ■ ■ ■
G 1/4 RBE 06.6151 * ■ ■ ■ ■ ■ * KES unavailable for standard and HPL versions
G 3/8 RBE 06.6152 ■ ■ ■ ■ ■
G 1/2 RBE 06.6153 ■ ■ ■ ■ ■
NPT 1/8 RBE 06.6250 ■ ■ ■ ■ ■
NPT 1/4 RBE 06.6251 ■ ■ ■ ■ ■
NPT 3/8 RBE 06.6252 ■ ■ ■ ■ ■
M 14 x 125 RBE 06.6414 ■
UN 9/16 - 20 RBE 06.6415 ■
W 3/8 (With.) RBE 06.6152/NW ■
■ ■ ■ ■ ■ ■ G 1/8 RBE 06.7150
■ ■ ■ ■ ■ ■ G 1/4 RBE 06.7151
■ ■ ■ ■ ■ ■ G 3/8 RBE 06.7152
■ ■ ■ ■ ■ ■ NPT 1/8 RBE 06.7250
■ ■ ■ ■ ■ ■ NPT 1/4 RBE 06.7251
■ ■ ■ ■ ■ ■ NPT 3/8 RBE 06.7252
For rubber hose
Ø 4 mm RBE 06.6804 ■ ■
Ø 6 mm RBE 06.6806 ■ ■
Ø 8 mm RBE 06.6808 ■ ■
Ø 10 mm RBE 06.6810 ■ ■
Ø 13 mm RBE 06.6813 ■ ■
■ ■ ■ Ø 6 mm RBE 06.7806
■ ■ ■ Ø 8 mm RBE 06.7808
■ ■ ■ Ø 10 mm RBE 06.7810
■ ■ ■ Ø 13 mm RBE 06.7813
For plastic pipe
Ø 4/6 mm RBE 06.6904 ■ ■
Ø 6/8 mm RBE 06.6906 ■ ■
Ø 8/10 mm RBE 06.6908 ■ ■
■ ■ ■ Ø 6/8 mm RBE 06.7906
■ ■ ■ Ø 8/10 mm RBE 06.7908

RBE quick-release couplings   1 7

Part-numbers
RBE 06
Full flow plugs Auto shut-off plugs
supplied with chloroprene (CR)
protective cap (see p. 27)

HP dard

IC PG
IA/ PL

I
HP
n

H
H
L
Sta

IC/
HP

IA/
End connection Part-numbers End connection Part-numbers

IA
For copper pipe
Ø 6/8 mm RBE 06.6706 ■
Ø 8/10 mm RBE 06.6708 ■
■ ■ Ø 6/8 mm RBE 06.7706
■ ■ Ø 8/10 mm RBE 06.7708

For calibrated stainless steel pipe* (double ring union) compliant with ISO 1127 class D4 and ASTM A 269 class 1 (installation instructions RV1300100)
ext. Ø 6 mm RBE 06.6766 ■ ■ ■ ■ ■
ext. Ø 8 mm RBE 06.6768 ■ ■ ■ ■ ■
ext. Ø 10 mm RBE 06.6770 ■ ■ ■ ■ ■
ext. Ø 1/4" RBE 06.6753 ■ ■ ■ ■ ■
ext. Ø 3/8" RBE 06.6755 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ext. Ø 6 mm RBE 06.7766
■ ■ ■ ■ ■ ext. Ø 8 mm RBE 06.7768
■ ■ ■ ■ ■ ext. Ø 10 mm RBE 06.7770
■ ■ ■ ■ ■ ext. Ø 1/4" RBE 06.7753
■ ■ ■ ■ ■ ext. Ø 3/8" RBE 06.7755
Clamp profile pursuant to ISO 2852 and DIN 32676
Ø 25 mm RBE 06.6025 ■ Ø 25 mm RBE 06.7025
Ø 34 mm RBE 06.6034 ■ Ø 34 mm RBE 06.7034
Ø 50 mm RBE 06.6050 ■ Ø 50 mm RBE 06.7050

■■ Protective caps and manifolds: see p. 26-27.

1 8   RBE quick-release couplings

Part-numbers
RBE 08
Standard sockets Panel mounted sockets

IA dard

G
IA/ PL

I
HP
HP
n

H
Sta

IC/
IA/
End connection Part-numbers Part-numbers

IC
Female thread
G 1/4 RBE 08.1101 ■ ■ ■ ■ ■ ■ RBE 08.2101
G 3/8 RBE 08.1102 ■ ■ ■ ■ ■ ■ RBE 08.2102
G 1/2 RBE 08.1103 ■ ■ ■ ■ ■ ■ RBE 08.2103
Rc 3/8 RBE 08.1112 ■ ■ ■ ■ ■ ■ RBE 08.2112
NPT 1/4 RBE 08.1201 ■ ■ ■ ■ ■ ■ RBE 08.2201
NPT 3/8 RBE 08.1202 ■ ■ ■ ■ ■ ■ RBE 08.2202
NPT 1/2 RBE 08.1203 ■ ■ ■ ■ ■ ■ RBE 08.2203
* as per SAE J 1926 UN 3/4 - 16 * RBE 08.1319 ■ ■ ■ ■ ■ ■ RBE 08.2319

Male thread
G 1/4 RBE 08.1151 ■ ■ ■ ■ ■ ■ RBE 08.2151
G 3/8 RBE 08.1152 ■ ■ ■ ■ ■ ■ RBE 08.2152
G 1/2 RBE 08.1153 ■ ■ ■ ■ ■ ■ RBE 08.2153
NPT 1/4 RBE 08.1251 ■ ■ ■ ■ ■ ■ RBE 08.2251
NPT 3/8 RBE 08.1252 ■ ■ ■ ■ ■ ■ RBE 08.2252
NPT 1/2 RBE 08.1253 ■ ■ ■ ■ ■ ■ RBE 08.2253

For rubber hose

Ø 8 mm RBE 08.1808 ■ ■ ■ RBE 08.2808
Ø 10 mm RBE 08.1810 ■ ■ ■ RBE 08.2810
Ø 13 mm RBE 08.1813 ■ ■ ■ RBE 08.2813
Ø 16 mm RBE 08.1816 ■ ■ ■ RBE 08.2816

For plastic pipe

Ø 8/10 mm RBE 08.1908 ■ ■ ■ RBE 08.2908
Ø 10/12 mm RBE 08.1910 ■ ■ RBE 08.2910

For copper pipe

Ø 8/10 mm RBE 08.1708 ■ ■ RBE 08.2708
Ø 10/12 mm RBE 08.1710 ■ ■ RBE 08.2710

For calibrated stainless steel pipe* (double ring union) compliant with ISO 1127 class D4 and ASTM A 269 class 1 (installation instructions RV1300100)
ext. Ø 10 mm RBE 08.1770 ■ ■ ■ ■ ■ RBE 08.2770
ext. Ø 12 mm RBE 08.1772 ■ ■ ■ ■ ■ RBE 08.2772
ext. Ø 3/8" RBE 08.1755 ■ ■ ■ ■ ■ RBE 08.2755
ext. Ø 1/2" RBE 08.1756 ■ ■ ■ ■ ■ RBE 08.2756

Clamp profile pursuant to ISO 2852 and DIN 32676

Ø 25 mm RBE 08.1025 ■
Ø 34 mm RBE 08.1034 ■
Ø 50 mm RBE 08.1050 ■

RBE quick-release couplings   1 9

Part-numbers
RBE 08
Full flow plugs Auto shut-off plugs
supplied with chloroprene (CR)
protective cap (see p. 27)

HP dard

IC PG
IA/ PL

I
HP
n

H
H
L
Sta

IC/
HP

IA/
End connection Part-numbers End connection Part-numbers

IA
Female thread
G 1/4 RBE 08.6101 ■ ■ ■ ■ ■
G 3/8 RBE 08.6102 ■ ■ ■ ■ ■
G 1/2 RBE 08.6103 ■ ■ ■ ■ ■
NPT 1/4 RBE 08.6201 ■ ■ ■ ■ ■
NPT 3/8 RBE 08.6202 ■ ■ ■ ■ ■
NPT 1/2 RBE 08.6203 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ G 1/4 RBE 08.7101
■ ■ ■ ■ ■ ■ G 3/8 RBE 08.7102
■ ■ ■ ■ ■ ■ G 1/2 RBE 08.7103
■ ■ ■ ■ ■ ■ Rc 3/8 RBE 08.7112
■ ■ ■ ■ ■ ■ NPT 1/4 RBE 08.7201
■ ■ ■ ■ ■ ■ NPT 3/8 RBE 08.7202
■ ■ ■ ■ ■ ■ NPT 1/2 RBE 08.7203
■ ■ ■ ■ ■ UN 3/4 - 16 * RBE 08.7319 * as per SAE J 1926

Male thread
G 1/4 RBE 08.6151 ■ ■ ■ ■ ■
G 3/8 RBE 08.6152 ■ ■ ■ ■ ■
G 1/2 RBE 08.6153 ■ ■ ■ ■ ■
NPT 1/4 RBE 08.6251 ■ ■ ■ ■
NPT 3/8 RBE 08.6252 ■ ■ ■ ■
NPT 1/2 RBE 08.6253 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ G 1/4 RBE 08.7151
■ ■ ■ ■ ■ ■ G 3/8 RBE 08.7152
■ ■ ■ ■ ■ ■ G 1/2 RBE 08.7153
■ ■ ■ ■ ■ ■ NPT 1/4 RBE 08.7251
■ ■ ■ ■ ■ ■ NPT 3/8 RBE 08.7252
■ ■ ■ ■ ■ ■ NPT 1/2 RBE 08.7253
For rubber hose
Ø 6 mm RBE 08.6806 ■ ■
Ø 8 mm RBE 08.6808 ■ ■
Ø 10 mm RBE 08.6810 ■ ■
Ø 13 mm RBE 08.6813 ■ ■
Ø 16 mm RBE 08.6816 ■ ■
■ ■ ■ Ø 8 mm RBE 08.7808
■ ■ ■ Ø 10 mm RBE 08.7810
■ ■ ■ Ø 13 mm RBE 08.7813
■ ■ ■ Ø 16 mm RBE 08.7816

For plastic pipe

Ø 8/10 mm RBE 08.6908 ■ ■
Ø 10/12 mm RBE 08.6910 ■
■ ■ ■ Ø 8/10 mm RBE 08.7908
■ ■ Ø 10/12 mm RBE 08.7910

2 0   RBE quick-release couplings

Part-numbers
RBE 08
Full flow plugs Auto shut-off plugs
supplied with chloroprene (CR)
protective cap (see p. 27)

HP dard

IC PG
IA/ PL

I
HP
n

H
H
L
Sta

IC/
HP

IA/
End connection Part-numbers End connection Part-numbers

IA
For copper pipe
Ø 8/10 mm RBE 08.6708 ■
Ø 10/12 mm RBE 08.6710 ■
■ ■ Ø 8/10 mm RBE 08.7708
■ ■ Ø 10/12 mm RBE 08.7710

For calibrated stainless steel pipe* (double ring union) compliant with ISO 1127 class D4 and ASTM A 269 class 1 (installation instructions RV1300100)
ext. Ø 10 mm RBE 08.6770 ■ ■ ■ ■ ■
ext. Ø 12 mm RBE 08.6772 ■ ■ ■ ■ ■
ext. Ø 3/8" RBE 08.6755 ■ ■ ■ ■ ■
ext. Ø 1/2" RBE 08.6756 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ext. Ø 10 mm RBE 08.7770
■ ■ ■ ■ ■ ext. Ø 12 mm RBE 08.7772
■ ■ ■ ■ ■ ext. Ø 3/8". RBE 08.7755
■ ■ ■ ■ ■ ext. Ø 1/2" RBE 08.7756

Clamp profile pursuant to ISO 2852 and DIN 32676

Ø 25 mm RBE 08.6025 ■
Ø 34 mm RBE 08.6034 ■
Ø 50 mm RBE 08.6050 ■
■ Ø 25 mm RBE 08.7025
■ Ø 34 mm RBE 08.7034
■ Ø 50 mm RBE 08.7050

■■ Protective caps and manifolds: see p. 26-27.

RBE quick-release couplings   2 1

Part-numbers
RBE 11
Standard sockets Panel mounted sockets

IA dard

IC PG
IA/ PL

I
HP
n

H
H
Sta

IC/
IA/
End connection Part-numbers Part-numbers
Female thread
G 3/8 RBE 11.1102 ■ ■ ■ ■ ■ ■ RBE 11.2102
G 1/2 RBE 11.1103 ■ ■ ■ ■ ■ ■ RBE 11.2103
G 3/4 RBE 11.1104 ■ ■ ■ ■ ■ ■ RBE 11.2104
Rc 1/2 RBE 11.1113 ■ ■ ■ ■ ■ ■ RBE 11.2113
NPT 3/8 RBE 11.1202 ■ ■ ■ ■ ■ ■ RBE 11.2202
NPT 1/2 RBE 11.1203 ■ ■ ■ ■ ■ ■ RBE 11.2203
NPT 3/4 RBE 11.1204 ■ ■ ■ ■ ■ ■ RBE 11.2204
* as per SAE J 1926 UN 7/8 - 14 * RBE 11.1322 ■ ■ ■ ■ ■ ■ RBE 11.2322

Male thread
G 3/8 RBE 11.1152 ■ ■ ■ ■ ■ ■ RBE 11.2152
G 1/2 RBE 11.1153 ■ ■ ■ ■ ■ ■ RBE 11.2153
G 3/4 RBE 11.1154 ■ ■ ■ ■ ■ ■ RBE 11.2154
NPT 3/8 RBE 11.1252 ■ ■ ■ ■ ■ ■ RBE 11.2252
NPT 1/2 RBE 11.1253 ■ ■ ■ ■ ■ ■ RBE 11.2253
NPT 3/4 RBE 11.1254 ■ ■ ■ ■ ■ ■ RBE 11.2254

For rubber hose

Ø 8 mm RBE 11.1808 ■ RBE 11.2808
Ø 10 mm RBE 11.1810 ■ ■ RBE 11.2810
Ø 13 mm RBE 11.1813 ■ ■ ■ RBE 11.2813
Ø 16 mm RBE 11.1816 ■ ■ ■ RBE 11.2816
Ø 19 mm RBE 11.1819 ■ ■ ■ RBE 11.2819

Clamp profile pursuant to ISO 2852 and DIN 32676

Ø 25 mm RBE 11.1025 ■
Ø 50 mm RBE 11.1050 ■

2 2   RBE quick-release couplings

Part-numbers
RBE 11
Full flow plugs Auto shut-off plugs
supplied with chloroprene (CR)
protective cap (see p. 27)

HP dard

IC PG
IA/ PL

I
HP
n

H
H
L
Sta

IC/
HP

IA/
End connection Part-numbers End connection Part-numbers

IA
Female thread
G 1/4 RBE 11.6101 ■ ■ ■
G 3/8 RBE 11.6102 ■ ■ ■ ■ ■
G 1/2 RBE 11.6103 ■ ■ ■ ■ ■
G 3/4 RBE 11.6104 ■ ■ ■ ■ ■
NPT 3/8 RBE 11.6202 ■ ■ ■ ■ ■
NPT 1/2 RBE 11.6203 ■ ■ ■ ■ ■
NPT 3/4 RBE 11.6204 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ G 3/8 RBE 11.7102
■ ■ ■ ■ ■ ■ G 1/2 RBE 11.7103
■ ■ ■ ■ ■ ■ G 3/4 RBE 11.7104
■ ■ ■ ■ ■ ■ Rc 1/2 RBE 11.7113
■ ■ ■ ■ ■ ■ NPT 3/8 RBE 11.7202
■ ■ ■ ■ ■ ■ NPT 1/2 RBE 11.7203
■ ■ ■ ■ ■ ■ NPT 3/4 RBE 11.7204
■ ■ ■ ■ ■ ■ UN 7/8 - 14 * RBE 11.7322 * as per SAE J 1926
Male thread
G 3/8 RBE 11.6152 * ■ ■ ■ ■ ■
G 1/2 RBE 11.6153 ■ ■ ■ ■ ■
G 3/4 RBE 11.6154 ■ ■ ■ ■ ■
NPT 3/8 RBE 11.6252 ■ ■ ■
NPT 1/2 RBE 11.6253 ■ ■ ■
NPT 3/4 RBE 11.6254 ■ ■ ■
■ ■ ■ ■ ■ ■ G 3/8 RBE 11.7152
* Only available on IC and IC/HPI
versions. ■ ■ ■ ■ ■ ■ G 1/2 RBE 11.7153
■ ■ ■ ■ ■ ■ G 3/4 RBE 11.7154
■ ■ ■ ■ ■ NPT 3/8 RBE 11.7252
■ ■ ■ ■ ■ NPT 1/2 RBE 11.7253
■ ■ ■ ■ ■ NPT 3/4 RBE 11.7254
For rubber hose
Ø 6 mm RBE 11.6806 ■ ■
Ø 8 mm RBE 11.6808 ■ ■
Ø 10 mm RBE 11.6810 ■ ■
Ø 13 mm RBE 11.6813 ■ ■
Ø 16 mm RBE 11.6816 ■ ■
Ø 19 mm RBE 11.6819 ■ ■
■ ■ ■ Ø 13 mm RBE 11.7813
■ ■ ■ Ø 16 mm RBE 11.7816
■ ■ ■ Ø 19 mm RBE 11.7819

Clamp profile pursuant to ISO 2852 and DIN 32676

Ø 25 mm RBE 11.6025 ■
Ø 50 mm RBE 11.6050 ■
■ Ø 25 mm RBE 11.7025
■ Ø 50 mm RBE 11.7050

■■ Protective caps and manifolds: see p. 26-27.

RBE quick-release couplings   2 3

Part-numbers
RBE 19
Standard sockets Panel mounted sockets

IA dard

IC PG
IA/ PL

I
HP
n

H
H
Sta

IC/
IA/
End connection Part-numbers Part-numbers
Female thread
G 3/4 RBE 19.1104 ■ ■ ■ ■ ■ ■ RBE 19.2104
G1 RBE 19.1105 ■ ■ ■ ■ ■ ■ RBE 19.2105
Rc 3/4 RBE 19.1114 ■ ■ ■ ■ ■ ■ RBE 19.2114
NPT 3/4 RBE 19.1204 ■ ■ ■ ■ ■ ■ RBE 19.2204
NPT 1 RBE 19.1205 ■ ■ ■ ■ ■ ■ RBE 19.2205
* as per SAE J 1926 UN 1 5/16 - 12 * RBE 19.1333 ■ ■ ■ ■ ■ ■ RBE 19.2333

Male thread
G 3/4 RBE 19.1154 ■ ■ ■ ■ ■ ■ RBE 19.2154
G1 RBE 19.1155 ■ ■ ■ ■ ■ ■ RBE 19.2155
NPT 3/4 RBE 19.1254 ■ ■ ■ ■ ■ ■ RBE 19.2254
NPT 1 RBE 19.1255 ■ ■ ■ ■ ■ ■ RBE 19.2255

For rubber hose

Ø 19 mm RBE 19.1819 ■ ■ ■ RBE 19.2819
Ø 25 mm RBE 19.1825 ■ ■ ■ RBE 19.2825

2 4   RBE quick-release couplings

Part-numbers
RBE 19
Full flow plugs Auto shut-off plugs
supplied with chloroprene (CR)
protective cap (see p. 27)

HP dard

IC PG
IA/ PL

I
HP
n

H
H
L
Sta

IC/
HP

IA/
End connection Part-numbers End connection Part-numbers

IA
Female thread
G 3/4 RBE 19.6104 ■ ■ ■ ■ ■
G1 RBE 19.6105 ■ ■ ■ ■ ■
NPT 3/4 RBE 19.6204 ■ ■ ■ ■ ■
NPT 1 RBE 19.6205 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ G 3/4 RBE 19.7104
■ ■ ■ ■ ■ ■ G1 RBE 19.7105
■ ■ ■ ■ ■ ■ Rc 3/4 RBE 19.7114
■ ■ ■ ■ ■ ■ NPT 3/4 RBE 19.7204
■ ■ ■ ■ ■ ■ NPT 1 RBE 19.7205
* as per SAE J 1926 ■ ■ ■ ■ ■ UN 1 5/16 - 12 * RBE 19.7333

Male thread
G 3/4 RBE 19.6154 ■ ■ ■ ■ ■
G1 RBE 19.6155 ■ ■ ■ ■ ■
NPT 3/4 RBE 19.6254 ■ ■ ■ ■ ■
NPT 1 RBE 19.6255 ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ G 3/4 RBE 19.7154
■ ■ ■ ■ ■ ■ G1 RBE 19.7155
■ ■ ■ ■ ■ ■ NPT 3/4 RBE 19.7254
■ ■ ■ ■ ■ ■ NPT 1 RBE 19.7255

For rubber hose

Ø 19 mm RBE 19.6819 ■ ■
Ø 25 mm RBE 19.6825 ■ ■
■ ■ ■ Ø 19 mm RBE 19.7819
■ ■ ■ Ø 25 mm RBE 19.7825

■■ Protective caps and manifolds: see p. 26-27.

RBE quick-release couplings   2 5

Part-numbers
Manifolds

Available in standard, IA and IC versions.

Not available in double shut-off, W and safety keys versions.

Part-numbers
Description End connection
RBE 03 RBE 06 RBE 08 RBE 11 RBE 19
Fixed two-way Y G 1/4 RBE 03.8101 RBE 06.8101
G 3/8 RBE 06.8102
G 1/2 RBE 06.8103 RBE 08.8103
G 3/4 RBE 11.8104 RBE 19.8104

Adjustable two-way Y RBE 03.8600 RBE 06.8600 RBE 08.8600 RBE 11.8600 RBE 19.8600

Adjustable two-way RBE 03.8660 RBE 06.8660

straight

2 6   RBE quick-release couplings

Part-numbers
Protective caps

To be ordered separately (excluding Chloroprene cap).

Socket caps Plug caps

Standard version: RBE xx.8500 Standard chloroprène (CR) version:

Stainless steel version (IC): RBE xx.8500/IC RBE xx.8550/BC

Supplied as standard with all auto shut-off

plugs.

Socket with PP option (see p. 9) Stainless steel version (IC):: RBE xx.8550/IC

Standard version: RBE xx.8500/PP

Stainless steel version (IC): RBE xx.8500/IC/PP

Socket with safety key option (see page 8)

Standard version: RBE xx.8500/U

Stainless steel version (IC): RBE xx.8500/IC/U

Socket with safety key and PP option

(see pages 8-9)

Standard version: RBE xx.8500/U/PP

Stainless steel version (IC): RBE xx.8500/IC/U/PP

Replace xx with the flow diameter of the corresponding socket or plug

E.g.: RBE 03.8550 = cap for a plug with a 3 mm flow diameter.

RBE quick-release couplings   2 7

 RC1000307G
Stäubli Units
Stäubli Units Representatives/Agents
Representatives/Agents

Global presence
of the Stäubli Group
www.staubli.com

Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 23/10/2019.
We reserve the right to modify product specifications without prior notice.
[email protected] | Photocredits: Stäubli