G

OPWILL TECHNOLOGIES (BEIJING) CO., LTD

IoT Terminal PDA Technical

Specification

Operation
Version: V1.00
PDA Technical Specification Revision History
Revision History
The following table shows the revision for this document.

Date Version Revision

28/JUN/2019 1.00 Initial release

The product and the technical specification document could be upgraded or

modified without notice. Please visit the website of OPWILL (www.opwill.com) or
contact us for the further information.

i
Briefs OTM2612 Gigabit Ethernet/PTN Test Module

Content
1. Overview ............................................................................................4
1.1 Scope ............................................................................................................ 4
1.2 Description ................................................................................................... 4
2. Configuration checklist .......................................................................6
2.1 With mobile phone function ......................................................................... 6
2.2 Wireless ticket management functions......................................................... 7
2.3 Optical power test function .......................................................................... 7
2.4 VFL Function ................................................................................................. 8
2.5 Includes a LAN port access, the PC user can be simulated, support ONU
Configuration ...................................................................................................... 8
2.6 Stream analyzer ............................................................................................ 8
2.7 ONU terminal simulation test function ......................................................... 9
2.8 ID card real-name authentication ............................................................... 10
2.9 TV emulation............................................................................................... 10
2.10 Dual-band WIFI test .................................................................................. 10
2.11 Cable tracing function .............................................................................. 11
2.12 Network cable to cable function .............................................................. 11
2.13 PPPoE dial test .......................................................................................... 11
2.14 Gigabit Ethernet network speed .............................................................. 11
2.15 Network Layer Test ................................................................................... 11
2.16 FTP client .................................................................................................. 11
2.17 Storage and file management features .................................................... 11
2.18 Supports self-install the operating system software ................................ 12
3. Broadband full-service support tool performance and other
requirements ......................................................................................... 13
3.1 Performance requirements ......................................................................... 13
3.2 Easy operation ............................................................................................ 13
3.3 System upgrade and docking ...................................................................... 13
3.4 Protective properties .................................................................................. 13
3.5 Broadband whole business support tool size, weight requirements .......... 14

ii
 3.6 Appearance Requirements for the Broadband Full Service Support Tool ... 14
3.7 Backlight function ....................................................................................... 14
3.8 Interface...................................................................................................... 15
3.9 Other extensions......................................................................................... 15
3.10 General requirements .............................................................................. 15
4. Marking, packaging, transportation and storage .............................. 17
4.1 Logo ............................................................................................................ 17
4.2 Packaging .................................................................................................... 17
4.3 Transportation ............................................................................................ 17
4.4 Storage ........................................................................................................ 17
5. After-sales requirements .................................................................. 18
6. Other instructions ............................................................................ 19
 Overview PDA Technical Specification
1. Overview
1.1 Scope
This specification is OPWILL's broadband procurement technical specification
bidding full-service support tools, provides broadband general requirements for full-
service support tools, performance requirements, labeling, packaging,
transportation and storage requirements, the tender only for broadband support
full service Tools products.

1.2 Description
The OPWILL reserves and has the right to interpret and modify this specification at
any time.
This specification is only for the requirements of the OPWILL 's recent broadband
access network construction. The OPWILL has the right to modify and supplement
this specification as needed before signing the contract, and the revised and final
specification will be an attachment to the contract.
Without the written permission of the OPWILL, the bidder shall not disclose the
contents of this specification to third parties in any form.
The bidder shall respond to each of the functional and performance requirements
presented below, piece by piece, and first make a clear "satisfaction", "partially
satisfied", "not satisfied" response to the degree of realization or satisfaction. The
terms required to be listed in the specification must be listed in the point-to-point
response, and cannot be simply answered "satisfied", otherwise the response to this
clause is considered "not satisfied". If you answer "partially satisfied", you need to
specify which ones are satisfied and which ones are not, and explain why. Unless
otherwise specified, the functions that the bidder responds to "satisfaction" shall be
the functions that the equipment has implemented, excluding functions that are
capable of supporting but not yet implemented, which will be implemented in the
near future, and are planned to be implemented in the future.
Items marked with ※ in this specification are required to be met. If not, the bid
will be rejected.
For the parts not mentioned in this specification that the manufacturer deems
necessary to explain, as well as more reasonable technical performance, the

4
PDA Technical Specification Overview
manufacturer shall provide detailed information and explanations in the bid
application.
The OPWILL will conduct verification testing at an appropriate time. If it is found that
the functional and performance requirements declared by the bidder do not match
the test results, the OPWILL reserves the right to take further measures.
 Configuration checklist PDA Technical Specification
2. Configuration checklist
The purchase broadband full-service support tools functional requirements and
configuration as follows,
Items Name
1 Android smartphone features
2 Optical power meter test function
3 VFL source test function
4 PC function completes speed measurement and ONU configuration
5 Stream Analyzer Test Function
6 ONU terminal emulation test function
7 Identity Verification function
8 HDMI TV Emulation Function
9 2.4G / 5G dual-band WIFI test
10 Cable tracking function
11 Network cable to cable function

2.1 With mobile phone function

1) Adopts Android OS, Android operating system does not less than 7.0; or using
Media Tek.Inc or SAMSUNG's high-performance CPU, CPU core is not less than four,
of not less than 1.4GHz frequency; Support Netcom queen 4G network
communication, dual card dual standby, support full Netcom 4G network
communication
2) Multi-touch touch screen with display no less than 5.0 inches, support
handwritten signature, readable under strong light, resolution no less than 720 *
1280
3) Equipped with a camera for collecting image information and supporting auto-
focus, it is convenient for the maintenance personnel to collect field information.
The rear camera is not less than 13 million pixels, the front camera is not less than
50 million pixels, supports autofocus, and fill light
4) With GPS positioning function.
5) With flashlight function and flashlight shortcut key start button

6
 PDA Technical Specification Configuration checklist
6) It has a hands-free function and a speaker, which requires a high ringtone so that
it can be heard outdoors.
7) With WLAN function, WIFI supports IEEE 802.11b / g / n / a, and can use the WIFI
signal to access the Internet.
8) with Bluetooth, supports 4.0 version, connect a Bluetooth printer.
9) Equipped with a volume adjustment button, which can freely adjust the volume
level according to the needs of the environment, and has a vibration function.
10) Supports the use of wired headsets and Bluetooth headsets.
11) LED indicates the current test status of the terminal, including test modules such
as network card and ONU
12) The keyboard has both physical and virtual inputs, and it has up, down, left, right,
and left navigation keys. When the virtual keyboard or screen is damaged or the
physical keyboard is damaged, all operations can be completed separately with the
physical keyboard or touch screen to meet emergency needs.
13) The terminal supports fast charging function (the actual charging current should
not be lower than 2.7A).
14) The terminal system software is highly tailored and customized, and no more
than 3 pre-installed applications can complete all installation and maintenance tests.
14) Support the power bank function, that is, external power supply via USB OTG

2.2 Wireless ticket management functions

1) The broadband full-service support tool has a built-in operator's 4G wireless
module and can log in to the work order system wirelessly.
2) The operator 's work order management system can be installed .
3) After logging in to the work order system, various work order operations such as
work order download, query, and test can be performed, and the operation is
normal and smooth.

2.3 Optical power test function

It has the function of optical power test, and has a built-in optical power test
interface. For the opening and maintenance of the optical network, it has six
 Configuration checklist PDA Technical Specification
wavelength calibration points of 850nm, 1300nm, 1310nm, 1490nm, 1550nm, and
1 577 nm. Enables installers to accurately measure fiber loss, verify fiber continuity,
and help evaluate fiber link transmission quality.
Functional requirements:
1) Applicable fiber type: single-mode, multi-mode.
2) Quick start, start stabilization time ≤ 10 seconds, no warm-up time required.
3) The optical interface type is a universal interface.
4) It has a Chinese/English operation interface. The function interface, operation
keys and other indication marks use Chinese/English marks or Chinese/English
auxiliary marks.
Performance requirements:
1) Adjustable wavelength range: 800 to 1700nm.
2) Calibration wavelength: 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1557nm.
3) Power test range: -70 to +3dBm.

2.4 VFL Function

With VFL function, it supports continuous light and 2Hz modulated light.
Performance requirements:
1) Working wavelength: 650 ± 20nm.
2) Output power: It can support 5 kilometers or more.

2.5 Includes a LAN port access, the PC user can be simulated, support ONU
Configuration
The device supports LAN access, which can write the SN code/LOID/Password of the
user-side ONU device during the opening and maintenance of the PON
communication system, emulate the user's PC, or replace the laptop to go online.

2.6 Stream analyzer

1) Supports Dual 10/100/1000M Ethernet ports, with HUB function, can be
connected in series between a set-top box and a home gateway. Support real-time
monitoring and analysis of audio and video streams (including SD, 2K HD and 4K
HD TV programs)

8
 PDA Technical Specification Configuration checklist
2) Support network protocol and network configuration analysis, including
transmission protocol encapsulation format, Source Mac, Dest Mac, IP Tos, IP ttl,
Source IP, Dest Ip, Source Port, Dest Port, number of IP packets, service data
transmission rate
3) Support intuitive stream quality scoring display, which can display stream
smoothness, download rate, network packet loss rate, network delay, etc. in the
way of good, good, medium, poor and bad.
4) Support the analysis of different bitstream encoder parameters, including video
encoding type, profile level, resolution, frame rate, etc., audio encoding type,
sampling rate, channel number, etc.
5) Support flexible and convenient network packet capture: One-click to start
packet capture and automatically save as PCAP file
6) When the code stream analyzer function is enabled, the test software can
synchronize with the set-top box to decode audio and video streams, and
synchronize with the TV to play TV programs, to visually compare the playback
quality and quickly determine the fault point.

2.7 ONU terminal simulation test function

GPON / EPON terminal emulation should be supported at the same time, compatible
with the current OLT of the operator.
Should have 1 Gigabit Ethernet ports and 1 voice interface.
It should have a PON indicator.
Should support the configuration of PASSWORD or SN registration code
configuration, showing the status change of the registration and authentication
process.
It should support the creation, editing and deletion of WAN connections. The
connection mode should include PPPoE/DHCP/Static IP/Bridge.
Support VLAN configuration for different WAN connections, VLAN mode should
include Tag/Transparent/Untag.
It should have Ping and route tracking functions to verify the connectivity of data
and voice channels.
 Configuration checklist PDA Technical Specification
It can fully simulate voice services and make calls directly on the meter or through
an external telephone.
PON physical layer parameter test can be performed, such as synchronized transmit
and receive power, voltage, current, operating temperature, number of transmitted
and received data packets, and number of lost packets.
Support manual network configuration.

2.8 ID card real-name authentication

The broadband full-service support tool needs to have the function of reading and
identifying the second-generation resident ID card information. It is required that
the broadband full-service support tool has a built-in card reading device that can
read the text, numbers, and pictures of the second-generation resident ID card After
decoding, it is displayed on the screen and the success rate is not less than 95%.

2.9 TV emulation
The broadband full-service support tool has an HDMI interface, which can receive
the HDMI signal output from the set-top box and play and display the sound and
video content through the installation and maintenance handheld terminal. The TV
simulation function can intelligently adapt the output resolution of the set-top box
without manual selection. The installation and maintenance personnel are simple
and easy to use; the video and audio signals input by HDMI can be automatically
recorded as MP4 files, and the process of entering the account password of the
remote control when the installation and maintenance personnel activates the set-
top box is recorded for historical records.

2.10 Dual-band WIFI test

The broadband full-service support tool has a built-in 2.4G / 5G dual-band WiFi test
module for easy maintenance and use. Measurements include: SSID, signal strength,
MAC addresses, connection status, band, channel, authentication / encryption and
the like, the connection is successful may be displayed: IP address, gateway, DNS,
subnet mask.

10
 PDA Technical Specification Configuration checklist
2.11 Cable tracing function
Equipped with cable tracking function such as network cable or telephone line, it
can realize telephone line patrol, and can quickly find the required pair of lines
among many pairs.

2.12 Network cable to cable function

One handheld terminal must have a network function line to line, can 1,2,3,4,5,6,7,8
twisted wire pair for testing can be determined twisted pair dislocation lines, short
circuit and open circuit, etc. Status .

2.13 PPPoE dial test

The broadband full-service support tool can set and modify PPPoE dial-up accounts
and passwords and perform PPPoE dial-up tests on the user's twisted pair (LAN port)
through the settings.

2.14 Gigabit Ethernet network speed

With gigabit speed measurement capability, when the test rate is 1000M, the actual
measured rate in the routing mode is not less than 900M. The bidder must promise
to connect with the speed measurement platform for free after winning the bid to
meet the local speed measurement requirements; Gigabit speed measurement
must also support Built-in and external ONU access modes.

2.15 Network Layer Test

Ping , Ipconfig, Tracert, and Route tests can be performed on the LAN or extranet at
the network layer .

2.16 FTP client

With FTP login shortcut interface, you can log in to a specific server by entering the
server IP address and user name and password, and you can upload and download
files.

2.17 Storage and file management features

1) file management
You can delete and dump the test log files in the broadband full-service support tool.
2) File transfer
 Configuration checklist PDA Technical Specification
The test log file in the broadband full-service support tool can be connected to the
computer via a USB cable and copied to the computer.
3) Support TF card storage
Information with a relatively large amount of data can be stored on the TF.

2.18 Supports self-install the operating system software

According to the different needs of maintenance personnel, you can install and
uninstall related application software yourself to facilitate the use of maintenance
personnel.

12
 PDA Technical Specification Broadband full-service
3. Broadband full-service support tool performance and other
requirements
3.1 Performance requirements
※ 1) Android operating system, the system version is not lower than Android7.0.
※ 2) The CPU is not less than quad-core, the main frequency is not less than 1.4GHz,
the RAM is not less than 2GB, and the ROM is not less than 16GB.
※3) Multi-touch screen with display no less than 5.0 inches, support handwritten
signature, readable under strong light, resolution no less than 720 * 1280.
※ 4) The keyboard has both physical and virtual inputs; it has up, down, left and
right navigation keys, and can complete the maintenance test after the screen is
broken.
5) IP54 industrial grade protection, strong waterproof, anti-pressure, anti-fall,
impact resistance, suitable for outside operations.
6) The rear camera is not less than 13 million pixels, and the front camera is not less
than 50 million pixels. It supports autofocus and fill light.
7) With flashlight function and quick start button.
8) Support the extended use of 128G TF card.
9) Rechargeable battery with a capacity of no less than 8200mAh and a standby time
of no less than 4 80 hours.

3.2 Easy operation

Broadband full-service support tools require Chinese/English display, a good
interface, support for file browsing in various formats, rich wiring for accessories,
and a portable backpack for easy use.

3.3 System upgrade and docking

Broadband full-service support tool manufacturers must promise that when the
broadband full-service support tool is improved or increased in functionality,
software upgrades can be easily performed.

3.4 Protective properties

1) Broadband whole business support tool housing thick, and has good shock
protection sheath, have good drop resistance, compressive strength, impact
 Broadband full-service PDA Technical Specification
capacity , vibration should meet the requirements of outdoor work; all interfaces
must be protected protective cover, To meet the requirements of waterproof and
dustproof.
2) The photoelectric waterproof and dustproof protection are separated to enhance
the protection of the optical port.

3.5 Broadband whole business support tool size, weight requirements

Broadband full-service support tools are required to be compact, lightweight, easy
to carry and handheld, and weigh ≤600g.

3.6 Appearance Requirements for the Broadband Full Service Support Tool
Injection operator Logo, as the following figure:

The printing size can be sprayed according to the meter according to the size of
6.8mm (width) x 18.6mm (length), or the logo area can be set according to the layout
of the broadband full-service support tool.

3.7 Backlight function

The broadband full-service support tool should provide a large-size color screen or
backlight function, so that the test results of the broadband full-service support tool
can be easily read in a dark environment. The keys of the broadband full-service
support tool have a backlight function, and the key characters can be clearly seen in
a dark environment.

14
 PDA Technical Specification Broadband full-service
3.8 Interface
1) Have at least 3 RJ45 interfaces, 1 RJ11 interface, optical power test interface, VFL
source test interface, ONU interface, charging interface, H DMI video interface, and
line inspection interface.
2) It must have a Micro USB interface and support OTG mode, which is convenient
for copying the stored results and upgrading software and can also be charged in an
emergency.
3) Equipped with a 3.5mm universal headphone jack, which can be connected to
wired headphones.

3.9 Other extensions

This item is given by the manufacturer based on product characteristics.

3.10 General requirements

3.10.1 Working environment should meet the following requirements
1) Working environment: temperature -5℃ ~ 55℃, relative humidity 40% ~ 85%.
2) Power supply voltage: The input of the power adapter is AC 220V ± 10%.
3) Transportation: The packaged product can be adapted to the normal
transportation of trains, ships, automobiles and aircrafts, and must not damage the
appearance and performance of the equipment.
3.10.2 Appearance and normal operation
1) Various accessories and manuals used for the measurement of broadband full-
service support tools are complete.
2) The broadband full-service support tool should have specifications, model,
manufacturer name, serial number, MC logo, date of manufacture, certificate of
qualification, etc.
3) Broadband full-service support tools should be displayed clearly without
mechanical damage affecting their work, and each key / button can be adjusted
freely.
3.10.3 Safety Requirements
Broadband full-service support tools must have CCC, CE, or FCC safety certifications.
Broadband full-service PDA Technical Specification
3.10.4 EMC requirements
The electromagnetic compatibility of the broadband full-service support tools
should meet the requirements of GB6833, GB / T17626.2 — 2006, GB / T17626.3 —
2006, and must not endanger the health and safety of users. Online testing of
broadband full-service support tools must not affect the network and equipment.
Normal operation.
3.10.5 Reliability Index
1) Broadband full-service support tools have an average MTBF of no less than 5,000
hours under normal operating conditions.
2) The repair rate of the purchased broadband full-service support tool during the
warranty period should be less than 20%.
3.10.6 Marking, packaging and transportation requirements
1) The outer packaging of the broadband full-service support tool should have clear
product information. The packaging is strong and sturdy, and the product can be
well protected. After packaging, it can be transported by commonly used vehicles
without affecting the normality of the broadband full-service support tool.
2) The full-service broadband support tool should have the operator’s logo and the
full-service broadband support tool model.

16
 PDA Technical Specification Marking/Packing/Transportation/Storage
4. Marking, packaging, transportation and storage
4.1 Logo
The outer packaging and basic packaging of the broadband full-service support tool
should have obvious signs indicating the product name, model, and manufacturer's
name.
The full-service broadband support tool housing must have the operator's logo or a
permanent label required by the customer.

4.2 Packaging
In addition to the product, the following items and related documents should be
packed in the packed box. The documents can be sealed in plastic bags or paper
bags.
1) Product instruction manual;
2) Product certificate;
3) packing list;
4) Spare accessories.
Information such as the product name, production unit, product model and quantity
should be marked on the outer part of the large packaging box.

4.3 Transportation
The packaging of the product should be suitable for transportation by any means of
transportation. Avoid collision, drop, direct rain and snow, and direct sunlight during
transportation.

4.4 Storage
The product should be stored in a well-ventilated and dry warehouse, and there
should be no corrosive gas around it. The storage temperature is -40 ℃ ～ + 80 ℃.
 After-sales requirements PDA Technical Specification
5. After-sales requirements
Supplier shall provide good after-sales service for their products, including staff
training, broadband full-service support tool inspection, broadband full-service
support tool maintenance, technical support and so on.
1) The warranty period of the broadband full-service support tool is not less than 36
months after the final inspection.
2) There is a special technical support service agency in China, which provides 7 ×
24 hours technical support.
3) During the warranty period, no fewer than one inspection shall be organized each
year, and on-site training shall be organized during the inspection.
4) There should be a standard broadband full-service support tool repair process,
and the repair time should not exceed 10 days.
5) Before the delivery of the broadband full-service support tool is applied, users
should be organized for training. The training method is on-site training, and the
training cost has been included in this offer.
7) When sending a repair tool for a broadband full service, a backup broadband full
service support tool should be provided.
8) The warranty period of the broadband full-service support tool after repair is not
less than six months.
9) Provide free broadband full-service support tool software upgrades.

18
 PDA Technical Specification Other instruction
6. Other instructions
(1) Satisfy the normal operation of existing operators' maintenance apps.
(2) The supplier's commitment to functional projects that can be developed and
supported in the future, to meet the functional development interfaced with the
mobile maintenance system interface, and to provide the time and specific
quotation for the development support commitment, and to determine whether the
subsequent development support costs are free or Included in this offer.
(3) The OPWILL reserves the right to interpret and modify the requirements of this
specification.

This time, the participating units need to provide prototypes and demonstration of
basic functions, develop new features in time, and supply them within the
prescribed time, otherwise the corresponding part of the technical score will be zero.
 OPWILL TECHNOLOGIES (BEIJING) CO., LTD.

Service and Support

Sales Contact Technical Support
Tel: +86(10)82771386-888 Tel: +86(10)82771386-800
Email: [email protected] Email: [email protected]

Address: Room 415, Digital Media Building, No. 7 Shangdi Information Road, Haidian
District, Beijing, PRC
Post Code: 100085
Tel: +86(10)82771386/2866/3382
Fax: +86(10)82771782
Web: www.opwill.com