This document describes the ESN108 Ethernet switch, which is designed to aggregate Ethernet traffic from an IP DSLAM for an Ethernet DSL Access (EDA) solution. The ESN108 provides 8 Fast Ethernet ports, 1 SFP port, built-in Power over Ethernet, VLAN support, IGMP snooping for multicast, and quality of service features. It can be installed directly on a KRONE mount and managed through the Public Ethernet Manager using SNMP.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100%(1)100% found this document useful (1 vote)
150 views2 pages
Esn 108
This document describes the ESN108 Ethernet switch, which is designed to aggregate Ethernet traffic from an IP DSLAM for an Ethernet DSL Access (EDA) solution. The ESN108 provides 8 Fast Ethernet ports, 1 SFP port, built-in Power over Ethernet, VLAN support, IGMP snooping for multicast, and quality of service features. It can be installed directly on a KRONE mount and managed through the Public Ethernet Manager using SNMP.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2
Ethernet DSL Access
Ethernet switch, ESN108
ESN108 is a Layer-2 aggregation switch especially Virtual LAN (VLAN) designed for the Ethernet DSL Access (EDA) solution By use of VLAN technology it is possible to create offering a unique solution for deployment of ADSL in separate logical networks within the Ethernet LAN. In the areas with low subscriber penetration. EDA solution, VLAN is used to separate traffic types or different services and to improve security. ESN108 is Description transparent for VLAN IDs and offers port mapping Concentrating the Ethernet traffic from the IP DSLAM, filtering. ESN108 provides eight 100 Mbps Fast Ethernet ports and one Single Mode Fiber (SMF) 100 Mbps SFP port. IP Multicast (IGMP snooping) ESN108 has built-in power over Ethernet (PoE) for ESN108 offers multicast loading of IP DSLAM software distributing power to the connected IP DSLAM via the and multicast video streaming by use of IGMP snooping. Fast Ethernet ports. The unique design of the IP DSLAM Listening to IGMP messages (Internet Group has been carried forward in ESN108 and it can be Management Protocol messages), the ESN108 switch installed directly on a KRONE LSA-PROFILE mount builds mapping tables and associates forwarding filters. frame. It dynamically configures the switch ports to forward IP multicast traffic only to those ports associated with multicast hosts. Quality of Service (QoS) Priority queues are used to guarantee the QoS needed Management for delay-sensitive applications like voice (IP telephony), ESN108 is managed by the Public Ethernet Manager video conferencing or video broadcast. Each packet (PEM), which is based on HP OpenView and SNMPv2c. going through the switch can be assigned a queue ESN108 can be managed via any of the Ethernet ports. priority (according to IEEE 802.1p). Packets with a higher By configuration, a dedicated VLAN can be used for priority are allowed to pass first through the switch. management signaling. A default VLAN number is configured for management Technical data • RFC 2665 Ethernet-like MIB • RFC1757 RMON-MIB VALID FOR RELEASES • RFC 1907 SNMPv2 • Ericsson ELN and EDA Enterprise MIBs EDA 1.2 CAPACITY GENERAL • Throughput: 900 Mbps full-duplex, 1.8 Gbps half- • IEEE 802.1 duplex • IEEE 802.1D Bridged Ethernet • Packet/Sec: 1.34 Mbps • IEEE 802.1D Spanning Tree • MAC address table capacity = 4096 MAC addresses • Transparency for VLAN IDs • Port mapping filtrering POWER
• Single —48 V DC input power connectors
Quality of Service • Power over Ethernet (PoE) capability • Flow control, traffic blocking based on memory usage • Maximum power consumption with PoE at —48 V: • Automatic packet aging support 217 W (including 8 x IP DSLAMs) • IEEE 802.1p, with two priority queues per egress port Maximum power dissipation: Multicast • Without PoE feature: 9 W • IGMP snooping supporting RFC 2236 • With PoE feature: 17 W INTERFACES DIMENSIONS Electrical interfaces • HxWxD: 42 x 185 x 125 mm • 8 x IEEE802.3u 100Base-TX Fast Ethernet interface, • Mounted on LSA-PROFILE UTP • Plastic Box: Flame-retardant material UL94 - V0 • IEEE802.3x Flow control, full duplex PERFORMANCE AND RELIABILITY Optical interfaces • Availability better than 99,999 % uptime • 1 x IEEE802.3u 100 Mbps Fast Ethernet Module, as • MTBF 56 years at 25°C an SFP module (SMF 0-15 km) • IEEE802.3ah compliance ELECTROMAGNETIC COMPATIBILITY
• EN 300 386:2001 for Telecommunication Centers and
Management interface Locations other than Telecommunication Centers. • Via any Ethernet port Class B • FCC Part 15 Class A MANAGEMENT ENVIRONMENTAL • Ericsson Public Ethernet Manager (PEM) • ETS 300 019-2-1: Storage, class 1.2 • A default VLAN is pre-configured for management • ETS 300 019-2-2: Transportation, class 2 • SNMPv2c alarms • ETS 300 019-2-3: Stationary use at weather protected • RFC1907 SNMPv2-MIB locations, Class 3.2 (up to +55°C) • RFC1213-MIB • Bellcore GR63-core zone 4 • RFC2233 IF-MIB • The lifecycle is optimized according to ISO 1400 • RFC1493 BRIDGE-MIB • RFC3014 NOTIFICATION-LOG-MIB