COLUMN EDGE FOOTING DESIGN

F-1
Input Parameters:
Concrete Strenght, fc' = 21 Mpa Longitudinal Bar, Ax = 6
Rebar yield strength, fy = 275 Mpa Traverse Bar, Ay = 6
Net allowable Soil Pressure, qa = 150 kPa Left edge, dx = -0.65
Footing Embedment Depth, Df = 1 m Loc Y - dir, dy = 0
Surcharge, qs = 3.5 kPa Depth, Cx = 0.3
Soil Weight, ws = 16 kN/m³ Width, Cy = 0.3
Footing Thickness, t = 0.28 m Load, Pd = 155.76
Length, L= 1.6 m Load, Pl = 14.576
Width, B= 1.2 m Moment X, Mx= 70
Clear Covering, c= 75 mm Moment y, My= -3.548
Check Soil Bearing Capacity

Applied Load, Pd + Pl = 170.34

Surcharge, qs (LB) = 6.72
Weigth Footing, (23.5-ws) tBL= 4.03
Pn = 181.09 kN
Mx = -47.7072 KNm My = 3.548 KNm
ex = -0.263 < L/6 = 0.2667 m
ey = 0.021 < B/6 = 0.200 m
P 6M > 150.00
qnx(max) = + = 187.49
BL L²B Fail!
P 6M < 150.00
qny(max) = + = 103.56
BL B²L Pass!

Check Thickness ; Two-way Shear

Applied Load, 1.2Pd + 1.6Pl = 210.23

Surcharge, 1.2 qs (LB) = 8.06
Weigth Footing, 1.2(23.5-ws) tLB = 4.84
Pu = 223.14
Mx = -75.0384 My = 3.548
ex = -0.34 m > L/6 = 0.2667
ey = 0.02 m < B/6 = 0.2
qumaxx = 262.776 qumaxy = 125.4563 Kpa
d = 0.189 m
Vux = Pu - qux (Cx+d/2)(Cy+d) = 177.74 KN
Vuy = Pu - quy (Cx+d/2)(Cy+d) = 200.72 KN Check Flexural Reinforcement; Asmin = 0.002Bt
bo = 2(D1 + d) 2(W1 + d) = 1.28 m Mux = Bx²/6 (qux + 2qumin) Muy = By²/6 (quy + 2qum
Ø Vc1 = Ø 0.33 √fc' bo d = 273.95 KN Mux = 49.73 KNm, Muy = 19.95
bc = Long/short side of column 1 ,αs = 30 Asx = 1206.37 mm², Asy = 1206.37
Ø Vc2 = Ø[1+(2/βc)].17 √f'c bo d = 423.38 KN Asmx = 672.00 mm², Asmy = 896.00
Ø Vc3 = Ø[2+(αs d/βc)].083 √f'c bo d = 528.49 KN Sx = 190.8 mm, Sy = 270.8
Ø Vc = min, Ø (Vc1, Vc2, Vc3) = 273.95 KN ax = Asx fy / 0.85 fc' B = 15.49
Must, ØVc > Vu, 273.95 > 200.72 Pass! ay = Asy fy / 0.85 fc' L = 11.62
Check One-way Shear; Check Tension Contolled Limit Ø=
Vux = .5 (qux+qumin)x d B = 95.22 KN ax/d = 0.082 ay/d = 0.061
Vuy = .5 (quy+qumin)y d L = 51.55 KN ab/d = 0.583 > ax/d & ay/d,
ØVcx = Ø 0.17 √fc' B d = 132.51 KN Pass! ØMnx = ØAsx fy(d-ax/2) = 54.12
ØVcy = Ø 0.17 √fc' L d = 176.69 KN Pass! ØMny = ØAsy fy(d-ay/2) = 54.70

Therefore use, 1.6x1.2x0.28m thick Footing with 16mmØ Tension Bar Grade (40) sp. @ 190.8mm and 270mm
along BL respectively O.C.
 2. If
design is
satisfied,
1. Fill up on Blue Color Only
Click the
3. Copy
Title and
and
dragPaste
as
downPicture
a
to Word
little.
16 mmØ Documen
4. Save as
tPDF file.
-0.65 m, 0 from center 0.45
0 m, 0 from center 0
0.3 m Input forces here
0.3 m P1 My MZ
155.76 KN 111 17 -13
14.576 KN
70 KNm Check Soil Bearing Capacity 0 1.6 0
-3.548 KNm 1.14 > 150.00 -262.78 30.34 -106.98
103.56 < 150.00
Check Thickness ; Two-way Shear
#REF! 177.74
#REF! SOIL PRESSURE
177.74 ALONG X @ FACTORED LOADS
Check One-way Shear
50
132.5143
0
Check Flexural Reinforcement
0 1.6
-
-50 #REF! 19.94971
0 - 0
-100
Check Tension Contolled Limit
-150 ØMny = 0.000
#REF! 0 0.000
-200

-250
1.14 103.5563
-300 187.4948 85.07708
-30.3427 125.4563
Row 16 Row 17
262.776 106.9771
Max 262.78 125.46 X - Twoway
Min -30.34 SOIL 106.98
PRESSURE ALONG YPositive@ FACTORED
Negative LOADS
Tip 20 293.12 18.48 X 0.15 1.45
-34.6247 4.019219 27.47988 265.6389
0
0 -64.97 111.00 quX -2.86 235.30 qu 1.2
-20
Vu = 10.80816 45.51284 b1, b2 0.3945 0.489 Vu
-40 27.47988 9.239583 Area Punch 0.192911 Vumax
-60
-2.86 116.22 Fu -0.55 45.39
-1.39992 91.69495 Vux 223.69 177.74
-80 -3.65869 44.83883

nt; Asmin = 0.002Bt -100 1way

Muy = By²/6 (quy + 2qumin) Vu = 226.79 178.30
-120 0.49 1.11
19.95 KNm X 1.04 0.56
-140
1206.37 mm² 270.8 191.35 101.77 quY
Row 16 Row 17
896.00 mm² quX 161.01 71.42 Area Punch
mm (Smax=450mm) 275053 Vux 214.66 95.22 Fu
mm 21.42 Vux
mm 12840.92997 Moment X
0.9 12.84093 Pos Neg
0.061 0.3 1.3
54.96 238.16
> 49.73 Pass! qu 24.62 207.82
> 19.95 Pass! 56431 56431 Mu 185.96 49.7302305
2312.175 1734.131
8mm and 270mm 54118.87 54696.92 Moment Y
54.11887 54.69692 Pos
3 0.45
 Y 0.45 0.75
3 x m 6.929688 11.5494792
Therefore use,
1.6x1.2x0.28m quy 113.91 118.53
Mu 17.70449 19.9497094
Mu 19.94971
 0.8 0.6
-0.5 0.15
1.3 0.45
1.2 0.28 0.28
-125.46

#REF!
LOADS #REF! Vu = qu - (WL-(D1+d)(W

1.6
0
0

0
#REF!

Y - 1way
Positive Negative f'c = 21
LOADS 0.26 0.26
0.261 0.94 0.26 0.94 -0.189 0.261
4.019219 14.45995 4.019219 14.45995
111.00
1.2 121.44 111.00 121.44
45.51284 51.55132 45.51284 51.55132 0.789 0.489 1.278
51.55132 51.55132 0.15 0.6
581.8182 3.075 1.5375

X - Twoway 2.3639063 2.3639063

Positive Negative
0.60 0.60 1375.3637
9.24 9.24 Mu = 0 0.45
116.22 116.22 270.0 0 0.15
0.19 0 0.3
22.42 22.42 450 0 6.9296875
200.72 200.72 0.001375 -30.34 113.91
129.6 0 17.70
110.16
1.3 0.082

1206
Moment Y 804
Neg 160.8
0.45
 0.45 0.75
6.929688 11.54948 thick Footing with Tension Baralong BL resL
113.91 118.53 16mmØ Tension Bar Grade (40) sp. @ 190.8mm and 270mm
17.70449 19.94971 mm and Grade ( ) sp. @
19.94971 Grade (40) sp. @
40

230 33
275 40
415 60
 Mux = 896.00
Muy = 19.95
B= 1.2
L= 1.6
fy
d= 0.189
Column1
###
###
###
qu - (WL-(D1+d)(W1+d))

1.92
0.489
0.489
1.680879 441.69473

0.75
3
0.1881704
0.0918714

7.67

4.5825757 0.2767211

,
Ø Vc1
Ø Vc2
Ø Vc3

157.66563
0.2025

100.365
0.4225
###
Asx = 1206.3716
Asy = 1206.3716