Laboratory Weighing Products

2 Laboratory Weighing

Laboratory Weighing
A wide selection of ultramicro, micro, analytical and precision balances allows you to choose any entry-level
to high-performance balance.

With more than 140 years of experience andContent

quality “Made in Germany,” we offer the best weighing option by excelling
in speed, repeatability and accuracy. They feature a monolithic weigh cell – a technology that we first introduced and that
continues at the leading edge in lab weighing.

Table of Contents
Laboratory Balances Services
7 Cubis® Premium 82 Instrument Services
Laboratory Balances 83 Installation and Qualification
20 ME36S 84 Extended Warranty
21 CPA26P and CPA225D 85 Calibration and Certificates
22 Secura® 86 Maintenance
26 Quintix®
30 Practum®
Pipette Calibration
32 Entris®
91 SpeedCal Multi-Channel Pipette
Calibration Balance
Moisture Analyzer
39 MA160
41 MA37
43 LMA200PM
45 MA100

Mass Comparators
51 Cubis® MCM

Weights and Weight Sets

63 Reference Line Weights
66 Reference Line Weight Sets
68 Proof Line Weights
72 Proof Line Weight Sets
74 Special Weight Sets
and Service Weight Sets
75 Cylindrical Weights
76 Accessories for Cleaning
and Handling of Weights
77 Accessories for Storage
of Weights
 Introduction Laboratory Balances 5

Laboratory Balances
Table of Contents

7 Cubis® Premium Laboratory Balances

20 ME36S
21 CPA26P and CPA225D
22 Secura®
26 Quintix®
30 Practum®
32 Entris®
6 Laboratory Balances Introduction

Cubis® Premium Laboratory Balances

Universal balances often only offer limited options to
adapt them to special workflows in laboratories.
Therefore, standard operating procedures (SOPs) must
frequently be adapted to the existing functionalities
of laboratory balances.

This does not apply to Sartorius Cubis®: they are the first
laboratory balances that you can integrate into your
individual workflows, as well as adapt to your weighing
containers and the conditions at your workplace by
using accessories and mechanical extensions.

Since we launched the Cubis® range of premium

laboratory balances in 2009, it has become the
benchmark for use in regulated sectors that impose
the highest requirements, such as in global
pharmaceutical labs.
 Cubis® Premium Laboratory Balances Laboratory Balances 7

Standard, Personalized or Fully Customized?

Your Choice

Modular Configuration
The first series of laboratory balances to feature a completely modular design, Cubis®
enables you to combine your choice of display and control unit, weighing module, data
interface module – and much more. You can choose from thousands of options to
­configure your balance to suit your individual needs and obtain the optimal solution
for integration into your process.

The Cubis® Operating Design

Beyond the Q-Guide standard user interface, Cubis® offers you personalized solutions
Cubis® with Q-Apps. You can choose from a wide variety of downloadable Q-Apps for laboratory
applications. The advantage is that you and your operators can adapt or fully personalize
them according to your process workflows or even configure them to meet your special
requirements right from the start.

MSA – The Ultimate Solution – Outstanding ease of use and display

– Top-of-the-line technology and quality, especially for complex
information design applications
– Touch screen featuring high-resolution – Q-Apps can be customized to your
color TFT for brilliant reproduction of individual workflow
text and graphics

MSA

MSU – Classic and Universal – Classic key-operated control with the

– High-resolution, generously sized, widest possible range of performance
monochrome graphic display features
– Keys that feature positive click action
and precise activation of functions

MSU

MSE – Weighing Pure and Simple – For users without complex operations
– Large, high-contrast liquid crystal display who primarily want to perform ultra-
– Easy-to-understand menu guidance with precise weighing
short text prompts
– Clearly structured keys for precise
activation of functions

MSE
8 Laboratory Balances Cubis® Premium Laboratory Balances

The Right Draft Shield for Any Task

All draft shield models for the Cubis® offer clear, practical advantages over
conventional lab balances.

DF Draft Shield for Filter Weighing

Manual stainless steel draft shield specially
designed for ultra-accurate weighing of
filters; for balances with 0.001 mg or
0.0001 mg readability (weighing modules
6.6S or 2.7S; not for 3.6P).

DF Draft Shield for Filter Weighing

DM Draft Shield
Automatic ultra-micro and micro balances
draft shield with learning capability; for
models with 0.001 mg or 0.0001 mg read-
ability (weighing modules 6.6S, 3.6P, 2.7S).

DM Draft Shield

DI Draft Shield
Automatic analytical balance draft shield
with an integrated ionizer for all models
with 0.01 mg, 0.1 mg or 1 mg readability
and for model 5202S.

DI Draft Shield

DA Draft Shield
Automatic analytical balance draft shield
for all models with 0.01 mg, 0.1 mg or
1 mg readability and for model 5202S.

DA Draft Shield
 Cubis® Premium Laboratory Balances Laboratory Balances 9

DU Draft Shield
Manual analytical balance draft shield for
all models with 0.01 mg, 0.1 mg or
1 mg readability and for model 5202S.

DU Draft Shield

DE Draft Shield
Manual draft shield for all models with
1 mg readability and for model 5202S.

DE Draft Shield

DR Draft Shield
Removable, flat draft shield made of
stainless steel for all models with 1 mg
readability and for model 5202S.

DR Draft Shield
10 Laboratory Balances Cubis® Premium Laboratory Balances

Cubis®. App-Solutely Individual

Uniqueness Wins The Sartorius App Center: Download and

Turn your Cubis® lab balance into a  Test Your Preferred Apps
Cubis® individual by integrating customer- You can readily download any standard
specific applica­tions, called Q-Apps. These Q-Apps from the Sartorius App Center and
are down­loadable application programs install these from an SD card in a Cubis®
that guide you step by step through a laboratory balance. Just test the Q-Apps of
specific workflow sequence. your choice for 30 days free of charge to
discover all their winning capabilities for
Q-Apps ensure that the proce­dures increasing efficiency in your daily lab work.
Homepage Q-App Shop described in the corres­ponding SOPs are
observed at all times. This makes Q-Apps
an attractive alternative to implementing
external middleware.

Standard or Personalized
Besides individual Q-Apps that are per-
formed according to your specific applica-
tion, a variety of solutions for differential
weighing, formulation and average weight
control, or checking the net quantities
Permanent Use of Q-Apps
filled, are available as standard Q-Apps.

Standard Q-Apps additionally provide solu-

tions for defining the starting point of
your balance‘s operating range as well as
for easy pipette calibration. With Q-Apps,
you can carry out a specific workflow
without needing to connect a computer.
 Cubis® Premium Laboratory Balances Laboratory Balances 11

Individual Integration into Your Application

Touch-Free Draft Shield Operation This provides additional safety, especially

The motorized draft shield can be opened for applications involving toxic substances.
and closed without being touched – just In addition, the IR sensor can also be used
a simple movement of your hand over the to trigger other functions, such as printing,
infrared sensor YHS01MS is all it takes. isoCAL or ionizer, etc.

Touch-free Draft

Q-Grid Pan with a large pan under laminar flow in

This gridded weighing pan, Q-Grid (acces- safety weighing cabinets, workbenches
sory option YWP03MS), is available for all or even in fume hoods, without restricting
Cubis® models with a readability of 10 mg its performance. This saves considerable
and 100 mg, except for model 5202S. effort in busy pharmaceutical laboratories.
Q-Grid lets you easily operate a balance

Q-Grid Pan

Q-Grip Holder Simply use it in place of the original weigh-

Q-Grip is a flexible and adaptable “one- ing pan. Its individually adjustable angle en-
size-fits-all” holder for bottles, test tubes, sures that you can maintain an ergonomic
reaction containers and filters of up to posture during filling and pipetting to
120 mm or nearly 5“. Available as accessory transfer samples into various containers.
option YFH01MS, it fits on all Cubis® semi-
micro balances and analytical balances.

Q-Grip Holder

Q-Stat Ionizer The effec­tive principle of four ion jets

At the touch of a key, the Q-Stat ionizer ensures that no disruptive air currents are
­integrated into the DI draft shield (see p. generated during charge neutralization.
16), eliminates electrostatic charges within This ensures that you will obtain stable and
seconds from ­sample containers and sub- correct weighing results – independently
stances, preventing any interference with of the ambient conditions.
your weight measurements.

Q-Stat Ionizer
12 Laboratory Balances Cubis® Premium Laboratory Balances

Ordering Information

Order Code

Note: Please use the adjacent fields to

- -
enter the selection made for each icon.

Example
MSA 524P - Ø TR - D I I P

Cubis® Display and Control Units

Select the display and control unit and enter it in the field identified by the icon in the order code.

Types MSA MSU MSE

Operation Touch screen, keys for important Keys Keys
basic functions
Display High-resolution color TFT, High-resolution black | white, Liquid crystal display, black | white
5.7” graphical display 5.7” graphical display
Adaptation of Tiltable display, Tiltable display, Removable display and
the display and removable display and removable display and control unit
control unit control unit control unit
Standard data – USB port (integrated into weighing module) – USB port (integrated into
interfaces –R S-232C accessory interface, 25-pin (integrated into weighing weighing module)
module) – RS-232C accessory interface,
– Ethernet (integrated into display and control unit) 25-pin (integrated into
–C hoice of data protocols available (also enables connection to weighing module)
software designed for external manufacturers) – Bluetooth® (optional accessory;
–B luetooth® (optional accessory; not for weighing capacities not for weighing capacities
> 20,200 g) > 20,200 g)
SD card reader Integrated as standard into Integrated as standard into –
display and control unit display and control unit
Operation of Activated by side keys or touch- Activated by side keys or touch- Activated by key or touch-free
motorized draft free using IR sensor (optional); free using IR sensor (optional); using IR sensor (optional);
shield (only for learning capability learning capability learning capability
DA, DI or DM
draft shields)
Applications Mass unit conversion, SQmin Mass unit conversion, SQmin Mass unit conversion, isoCAL
function for operating range function for operating range automatic calibration | adjustment
­starting point according to USP, ­starting point according to USP, function, density determination
isoCAL automatic calibra- isoCAL automatic calibra- (buoyancy method only),
tion | ­adjustment function, tion | ­adjustment function, calculation, averaging, net | total
­individual identifiers, density ­individual identifiers, density formulation, weighing in percent,
determina­tion, statistics, calcula- ­determination, statistics, calcula- counting, totalizing
tion, averaging, formulation, tion, averaging, formulation,
weighing in percent, time-con- weighing in percent, time-con-
trolled functions, t­ otalizing, trolled functions, t­ otalizing,
DAkkS measurement uncertainty, DAkkS measurement uncertainty,
second tare memory, counting, second tare memory, counting,
checkweighing, Alibi memory, checkweighing, Alibi memory,
audit trail audit trail
Personalizable – Downloadable Q-Apps – –
with Q-Apps – Customer-specific modifica-
tions on request
 Cubis® Premium Laboratory Balances Laboratory Balances 13

Cubis® Weighing Modules

Please enter the model name, starting from the left, in the field identified by the icon in the order code.

Readability Weighing Weighing Typical Typical Repeatability Linearity Eccentric Optimum

[mg] capacity pan stabiliza- response [<±mg] [<±mg] load [mg]* starting
[g] (W + D) tion time time (test load point
[mm] [<s] [<s] [g]) of the
operating
range
[mg]**
Ultra-Micro Balance
0.0001 mg
2.7S 0.0001 2.1 d 20 7 10 0.00025 0.0009 0.0025 (1) 0.082***

Micro Balances
0.001 mg
6.6S 0.001 6.1 d 30 5 8 0.001 0.004 0.004 (2) 0.82***
3.6P 0.001 | 0.002 | 1.1 | 2.1 | 3.1 d 30 5 8 0.003 | 0.004 | 0.004 0.005 (1) 0.82***
0.005 0.005

Semi-Micro Balances
0.01 mg
225S 0.01 220 85 + 85 2 6 0…60 g: 0.015 0.1 0.15 (100) 8.2
60…220 g: 0.025
225P 0.01 | 0.02 |  60 | 120 | 220 85 + 85 2 6 0…60 g: 0.015 0.15 0.2 (100) 8.2
0.05 60…220 g: 0.04
125P 0.01   |  0.1 60  |  120 85 + 85 2 6 0…60 g: 0.015 0.15 0.15 (50) 8.2
60…120 g: 0.06

Analytical Balances
0.1 mg
524S 0.1 520 85 + 85 1 3 0.1 0.4 0.3 (200) 82
524P 0.1 | 0.2 | 0.5 120 | 240 | 520 85 + 85 1 3 0.15 | 0.2 | 0.4 0.5 0.4 (200) 82
324S 0.1 320 85 + 85 1 3 0.1 0.3 0.3 (200) 82
324P 0.1 | 0.2 | 0.5 80 | 160 | 320 85 + 85 1 3 0.1 | 0.2 | 0.4 0.5 0.4 (200) 82
224S 0.1 220 85 + 85 1 3 0.07 0.2 0.2 (100) 82
124S 0.1 120 85 + 85 1 3 0.1 0.2 0.2 (50) 82

* Position according to OIML R76

** According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined as the range from 820 d to the maximum
weighing capacity. Depending on the installation location and environmental conditions, the value may be higher.
*** With DM draft shield
14 Laboratory Balances Cubis® Premium Laboratory Balances

Cubis® Weighing Modules

Please enter the model name, starting from the left, in the field identified by the icon in the order code.

Readability Weighing Weighing Typical Typical Repeata- Linearity Eccentric Optimum

[mg] capacity pan stabiliza- response bility [<±mg] (off-­ starting
[g] (W + D) tion time time [<±mg] center) point
[mm] [<s] [<s] [mg]* of the
(Test load operating
[g]) range
[g]**
Precision Balances
5203S 1 5,200 140 + 140 1 2 1 5 2 (2,000) 0.82
5203P 1 | 2 | 5 1,200 | 2,400 |  140 + 140 1 2 1 5 2 (2,000) 0.82
5,200
3203S 1 3,200 140 + 140 1 2 1 5 2 (1,000) 0.82
2203S 1 2,200 140 + 140 1 1.5 1 3 2 (1,000) 0.82
2203P 1 | 10 1,010 | 2,200 140 + 140 1 1.5 1 | 6 5 3 (1,000) 0.82
1203S 1 1,200 140 + 140 1 1.5 0.7 2 2 (500) 0.82
623S 1 620 140 + 140 0.8 1 0.7 2 2 (200) 0.82
623P 1 | 2 | 5 150 | 300 | 620 140 + 140 0.8 1 1 | 2 | 4 5 4 (200) 0.82
323S 1 320 140 + 140 0.8 1 0.7 2 2 (200) 0.82
14202S 10 14,200 206 + 206 1 1.5 10 30 20 (5,000) 8.2
14202P 10 | 20 | 50 3,500 | 7,000 |  206 + 206 1 1.5 10 | 20 | 4 0 50 40 (5,000) 8.2
14,200
10202S 10 10,200 206 + 206 1 1.5 7 20 20 (5,000) 8.2
8202S 10 8,200 206 + 206 1 1.5 7 20 20 (5,000) 8.2
6202S 10 6,200 206 + 206 1 1.5 7 20 20 (2,000) 8.2
6202P 10 | 20 | 50 1,500 | 3,000 |  206 + 206 1 1.5 7 | 20 | 4 0 50 50 (2,000) 8.2
6,200
5202S 10 5,200 140 + 140 0.8 1 6 10 10 (2,000) 8.2
4202S 10 4,200 206 + 206 0.8 1 7 20 30 (2,000) 8.2
2202S 10 2,200 206 + 206 0.8 1 7 20 20 (1,000) 8.2
1202S 10 1,200 206 + 206 0.8 1 7 20 20 (500) 8.2
12201S 100 12,200 206 + 206 0.8 1 50 100 200 (5,000) 82
8201S 100 8,200 206 + 206 0.8 1 50 100 200 (5,000) 82
5201S 100 5,200 206 + 206 0.8 1 50 100 200 (2,000) 82

High-Capacity Balances
70201S 100 70,200 400 + 300 1.5 100 500 500 (20,000) 82
36201S 100 36,200 400 + 300 1.5 100 200 300 (10,000) 82
36201P 100   |   1,000 10,200 |  400 + 300 1.5 100 | 500 200 300 (10,000) 82
36,200
20201S 100 20,200 400 + 300 1.5 100 200 300 (5,000) 82
70200S 1,000 70,200 400 + 300 1 500 1,000 1,000 (20,000) 820
36200S 1,000 36,200 400 + 300 1 500 1,000 1,000 (10,000) 820

* Position according to OIML R76

** According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined as the range from 820 g to the maximum
weighing capacity. Depending on the installation location and environmental conditions, the value may be higher.
 Cubis® Premium Laboratory Balances Laboratory Balances 15

Cubis® Leveling
Select the type of leveling mode and enter “Ø” or “1” in the field identified by the icon in the order code.

Ø Cubis® shows the level indicator on the display and provides support for rapid leveling (a standard feature on MSA
and MSU display and control units; for MSE units, only symbols are provided to support manual leveling).
1 Fully automatic, motorized Q-Level leveling at the touch of a key (available for all Cubis® weighing modules with a
weighing capacity of > 6.1 g and < 6,200 g).

Test and Approval Certificates

Select a test or approval certificate and enter the certificate type in the field identified by the icon in the order code.

ØØ Standard certificate of conformity to specifications

TR Like ØØ, but with a detailed test report
CE Factory-calibrated with European verification certificate (not for models with DF draft shield)
16 Laboratory Balances Cubis® Premium Laboratory Balances

Cubis® Draft Shields

Select a draft shield and enter the identifier in the field identified by the corresponding icon in the order code.

D0 Flat, stainless-steel weighing pan with no draft shield for weighing modules with a pan size of 206 + 206 mm and
400 + 300 mm.
DR Flat, stainless-steel weighing pan draft shield (removable, with no glass components) for all precision balances with
a readability of 1 mg and weighing module 5202S.

DE Manual glass draft shield for precision balances with a readability of 1 mg and weighing module 5202S.

DU Manual glass analytical draft shield chamber, with smooth-action doors that open wide and provide unimpeded
access to the weighing chamber without interfering braces. For all models with 0.01 mg, 0.1 mg and 1 mg
readability and weighing module 5202S.
DA Automatic, glass-motorized draft shield with learning capability for user-friendly operation and easy customization
to the changing requirements of different applications. For all models with 0.01 mg, 0.1 mg and 1 mg readability
and weighing module 5202S.

DI Identical to the DA draft shield, but also includes an integrated ionizer to eliminate interfering electrostatic charges
on samples and sample containers.

DM Automatic, motorized, round 100% glass draft shield with learning capability for ultra-micro and micro balances
with a readability of 0.0001 mg and 0.001 mg (2.7S, 6.6S and 3.6P weighing modules).

DF Manual, stainless-steel draft shield for weighing filters with diameters of up to 50 mm (75 mm and 90 mm pans
optional). Designed to minimize the effects of static electricity (not for weighing module 3.6P).

Interface Module Options

For every balance, you can select an additional interface module. 

IR RS-232 interface, 25-pin

IB Bluetooth® interface
IP RS-232 interface, 9-pin, incl. PS/2 interface
 Cubis® Premium Laboratory Balances Laboratory Balances 17

Q-Apps
Description Order No.
UserCal V1. Software guided, external calibration procedure YAPP01
UserCal Advanced. Software guided, external calibration procedure with HTML evaluation YAPP012
USP V2. Software for determination of the operating range acc. USP YAPP02
USP Advanced. Software for determination of the operating range acc. USP with HTML evaluation YAPP022
Backweigher V1. Differential weighing application with automatic sample numbering YAPP03
Backweigher V2. Differential weighing application with batches and automatic sample numbering YAPP032
Backweigher V3. Differential weighing application with individual sample ID YAPP033
Pipette Check V1. Test routine for easy and accurate testing of pipettes YAPP04
Pipette Check Advanced. Test routine for easy and accurate testing of pipettes with HTML YAPP042
evaluation for the last check
Formulation V1. Routine for easy and accurate formulating process YAPP05
Tablet Checker V1. Tablet checking acc. to pharmacopeia YAPP06
Residual Dirt Analysis. Differential weighing application acc. to VDA19 YAPP10
QR and barcode label creator. Requirement for printing labels on the YDP30 printer YAPP11
Easy ID. Weighing application with individual sample ID and GLP record YAPP12
Activation for Webservice YAPP100
18 Laboratory Balances Cubis® Premium Laboratory Balances

Cubis® Optional Accessories

Printers and Communication
Verifiable data printer for connection to RS-232, 25-pin accessory interface YDP10-0CE
Verifiable data printer with Bluetooth® data transmission (with YDO01MS-B or option IB only) YDP10BT-0CE
Color ribbon for YDP10-0CE and YDP10BT-0CE 6906918
Paper rolls for printer YDP10-0CE; 5 rolls, each with 50 m 6906937
Data interface Bluetooth® for wireless connection of data printer YDP10BT-0CE YDO01MS-B
RS-232C data interface, 9-pin including PS/2 for connecting a computer or keyboard YDO01MS-P
®
RS-232C data interface, 25-pin for connection of Cubis accessories YDO01MS-R
Display cable, 3 m, for Cubis® MSA and MSU models, for remote setup of display and weighing unit YCC01-MSD3
(installation by Sartorius Service or in factory [order VF4016])
Display cable, 3 m, for Cubis ® MSE models, for remote setup of display and weighing unit YCC01-MSED3
(installation by Sartorius Service or in factory [order VF4016])
Cable, 3 m, between weighing module and electronics module YCC01-MSM3
for Cubis® models with 0.01 mg|0.001 mg|0.0001 mg readability
Installation display cable, 3 m, for Cubis® models, for remote setup of display and weighing unit VF4016
RS-232C interface cable to connect computer with a 9-pin COM port, length 1.5 m 7357314
SartoCollect software for data communication between balance and PC YSC02

Displays and Input|Output Elements

MSA control unit with color TFT graphic display and touch screen YAC01MSA
MSE display unit with backlit liquid-crystal and tactile keys YAC01MSE
MSU control unit with backlit b | w graphic display and tactile navigation keys YAC01MSU
Barcode scanner with connecting cable, 120 mm reading range YBR03PS2
Foot switch for printing, taring or using a different function key; YFS01
key function selectable by menu code, incl. T-connector
Infrared sensor for touch-free activation of functions (e.g., controlling the draft shield) YHS01MS
Hand switch for printing, taring, or using a different function key; YHS02
key function selectable by menu code, incl. T-connector
Foot switch for activating the OPEN|CLOSE draft shield functions YPE01RC
(only in combination with DA and DI draft shield), taring and printing
Additional display, LCD, digit height 13 mm, backlit YRD03Z
3-segment checkweighing display, red – green – red, for plus | minus measurements, incl. T-connector YRD11Z

The Bluetooth® word mark and logos are owned by Bluetooth® SIG, Inc., and any use of such marks by Sartorius is under
license. Other trademarks and trade names are those of their respective owners.
 Cubis® Premium Laboratory Balances Laboratory Balances 19

Pipette Calibration Hardware and Software

Pipette calibration kit (hardware) for models with 0.1 mg and 0.01 mg readability YCP04MS
Consists of moisture trap and all required adapters
Pipette calibration kit (hardware) for micro balance weighing modules 6.6S and 3.6P VF988
Consists of moisture trap and all required adapters

Filter Weighing and Anti-Static Accessories

Anti-static weighing pan, 130 mm diameter, for weighing modules with a readability of 0.1 mg or 0.01 mg YWP01MS
Filter weighing pan, 75 mm diameter, for ultra-micro or micro balance models VF2562
(weighing modules 6.6S, 2.7S; only together with DF draft shield)
Filter weighing pan, 90 mm diameter, for ultra-micro or micro balance models VF2880
(weighing modules 6.6S, 2.7S; only together with DF draft shield)
Ionization blower to eliminate electrostatic charges on sample containers and samples YIB01-0DR
Stat-Pen ionization probe for discharging electrostatically charged samples and filters YSTP01

Special Applications
Density determination kit for solids and liquids: for weighing modules with a readability < 1 mg YDK01MS
Density determination kit for solids and liquids: for weighing modules with a readability = 1 mg YDK02MS
Q-Grip, universal holder for containers used for weighing and filters up to a diameter of 120 mm YFH01MS
(replaces the original weighing pan; for Cubis® models with 0.01 and 0.1 mg readability)
Q-Grid weighing pan for Cubis® models with a readability of 10 mg or 100 mg (pan size of 206 + 206 mm) YWP03MS
for weighing in laboratory hoods, safety weighing cabinets or workbenches
(reduces exposure of the weighing pan to lift by strong air current; replaces standard weighing pan)

Balance Tables
Balance table made of cast stone, for weighing with vibration dampening YWT03
Wall console YWT04
Balance table made of wood with cast-stone inset for precise, reliable weight measurements YWT09

Weighing Accessories
Weighing scoop of chrome nickel steel, 90 + 32 × 8 mm 641214
Aluminum weighing scoop, 4.5 mg (250 units) for ultra-micro and micro balance models 6565-250
Aluminum weighing scoop, 52 mg (50 units) for ultra-micro and micro balance models 6566-50
Support arm for 10  | 100 mg precision weighing modules for raised mounting of MSE, MSU and MSA YDH01MS
display and control units
Support arm for precision weighing modules with 100 mg | 1 g readability and weighing capacity > 20 kg YDH02MS
for raised mounting of MSE, MSU and MSA display and control units
Hook for below-balance weighing; for precision weighing modules with 100 mg | 1 g readability 69EA0040
and weighing ­capacity > 20 kg (not for models verified for use in legal metrology; selectable CE features)

The brand name and logo for Bluetooth® wireless technology are the property of Bluetooth® SIG Inc.
The use of this brand name and trademark by Sartorius AG is under license. Other brand names and trademarks
are the property of their respective owners.
20 Laboratory Balances ME36S

ME36S
High-Capacity Micro and Semi-Micro Balances (non-Cubis® series)

Features Applications
– Fully automatic draft shield system – Unit Toggling
– Coated, conductive draft shield, helps – % Weighing
prevent static build-up – Checkweighing
– Stored calibration | adjustment records – Averaging | Animal Weighing
– Four digital filter levels optimally – Formulation
adapts to ambient conditions – Net-Total
– Statistics
– Backweighing
– Timer
– Density Determination
– Memory (300 samples)

Specifications
Calibration
Model Capacity Read- Repro­ Linearity Pan Size Type Wt [g] Shipping
[g] ability ducibility [μg] (±) [mm|in.] Wt
[μg] [μg] (±) [kg | lbs]
ME36S 31 1 2 10 d 30 |1.2 isoCAL 20+10* 28.2 | 62.2

*custom weight set required. Contact Sartorius for more information

Ordering Information
Accessories
641214 Weighing scoop, made of chrome-nickel steel,
90 mm + 32 mm + 8 mm
6565-250 Weighing scoop, made of aluminium, 4.5 mg
6566-50 Weighing scoop, made of aluminium, 52 mg
YPE01RC Foot switch, incl. T-connector, for MSA, MSU
YCP04-HW + VF3677 Pipette Calibration Set (hardware) for ME and CPA analytical
balances (not ME5 and ME36S). Consists of moisture trap
and all needed adapters
YCC01-MED27 Cable for connecting the weighing cell to a separate
display and control unit (length 2.70 m) for all ME models
(except ME5)
 CPA26P and CPA225D Laboratory Balances 21

CPA26P and CPA225D

High-Capacity Micro and Semi-Micro Balances (non-Cubis® series)

Features – (CPA225D) dual-range semi-micro

– Monolithic weight cell for fast balance with 100/220g
reliable results capacity + 0.01/0.1 mg readability
– Large manual draft shield
– (CPA26P) 5-gram weighing range is Applications
available over the entire 21-gram range – Counting
– Positive “click-action” keys – % Weighing
– Four digital filter levels optimally adapts – Unit Toggle
to ambient conditions – Averaging|Animal Weighing
CPA26P – Net-Total

Specifications
Calibration
Model Capacity Read- Repro­ Linearity Pan Size Type Wt [g] Shipping
[g] ability ducibility [μg] (±) [mm|in.] Wt
[μg] [μg] (±) [kg | lbs]
CPA26P 5 | 21 2 | 10 4 8 d 50 |1.97 isoCAL 20 10.10 | 
22.3
CPA225D 40 10 20 30 d 80 | 3.1 isoCAL 200 10.80 | 
CPA225D 100  10 50 100 23.8
220 100 100 200

Ordering Information
Accessories for All Balance Models
YCP04-HW + VF3677 Pipette Calibration Set (hardware) for ME and CPA analytical
balances (not ME5 and ME36S). Consists of moisture trap and all
needed adapters
YDP20-0CE Data printer, verified for use in legal metrology; with date, time,
statistics and transaction counter functions
6906937 Paper rolls, for YDP20-0CE; 5 units, each with 40 m
6906918 Ink ribbon cassette, for YDP20-0CE
YWT09 Balance table, wood with synthetic stone plate for precise,
reliable weighing operations
YWT03 Balance table, cast stone, with vibration dampeners
YWT04 Wall console for micro, analytical and precision balances
YHS02 Hand switch, incl. T-connector
YFS01 Foot switch, incl. T-connector
YIB01-0DR Ionizing blower, for electrostatically charged samples 220 V
YIB01-0UR Ionizing blower, for electrostatically charged samples 110 V
YSTP01 Stat pen, unit to neutralize static electricity on samples
(100 V to 230 V, 50 | 60 Hz)
YTC01 T-connector, for connecting two peripheral devices to the balance
YCC01-USBM2 RS-232C|USB Interface cable, for connecting the balance
to a PC with USB port; length approx. 2 m
7357312 RS-232C Interface cable, for connecting the balance
to a PC with 25-pin com port; length approx. 2 m
7357314 RS-232C Interface cable, for connecting the balance
to a PC with 9-pin com port; length approx. 2 m
YDK01 Density Kit for 0.01 mg balances
YRB11Z Rechargeable battery pack for standard lab balances
6960CP04 In-use cover for 0.01 mg balances
22 Laboratory Balances Secura®

Secura®
Standard Balances

Secura® balances are ideal for users for Applications

whom accurate weighing results and con- Mixing, Components, Statistics, Weighing,
venient operation are self-evident. Beyond Density, Percentage, Checkweighing,
this, Secura® features safe and secure pro- Peak Hold, Counting, Mass Unit Conversion
tection systems such as real-time leveling and Unstable Conditions.
support or automatic internal adjustment.
Languages
Description English, French, German, Hungarian,
Secura® gives you the security and peace Italian, Polish, Portuguese, Russian,
of mind of knowing that you have done Spanish, Turkish, Chinese, Japanese
everything right. Besides providing highly and Korean.
accurate weighing results and operating
convenience, Secura® also features built-in Benefits
protection systems for complete reliability – Integrated protection systems for
and regulatory compliance – the safe and absolutely correct and reliable results
secure way. – Avoid errors caused by an unleveled
balance
Real-time guidance prompts for leveling, – The highest accuracy ensured by isoCAL
automatic internal adjustment and 100% automatic calibration and adjustment
traceable, clear documentation – with – USP-compliant weighing with SQmin
­sample and batch identifiers – make your – Selectable security levels to adapt the
lab work more efficient. First, the new balance’s error response to your needs
­operating concept of Secura® will notice- - GLP | GMP-compliant documentation
ably ease your daily workload during with alphanumeric sample and batch
weighing and, second, its APC function – identifiers
Advanced Pharma Compliance – will relieve - Customizable GLP | GMP header
you from tedious and time-consuming information
product design
documentation and monitoring tasks. - Safe and secure password protection
 Secura® Laboratory Balances 23

Specifications
Semi-Micro Balances
Model 225D 125
Weighing capacity g 60|120|220 60 |120
Readability mg 0.01|0.01|0.1 0.01|0.01
Repeatability ± mg 0.02|0.04|0.07 0.02|0.04
Linearity ± mg 0.1|0.1|0.2 0.1|0.1
Typical stabilization time s 6|6|2 6|6
Minimum sample weight mg 25* 25*
as per USP, typical**
Weighing pan size mm d 80 d 80
Net weight, approx. kg 7.8 7.8
Dimensions, D + W + H mm 376 + 214 + 316 376 + 214 + 316
Type of calibration isoCAL isoCAL

Analytical Balances
Model 324 224 124
Weighing capacity g 320 220 120
Readability g 0.0001 0.0001 0.0001
Repeatability ±g 0.0001 0.0001 0.0001
Linearity ±g 0.0003 0.0002 0.0002
Typical stabilization time s 2 2 2
Minimum sample weight g 0.16 0.12 0.12
as per USP, typical*
Weighing pan size mm d 90 d 90 d 90
Net weight, approx. kg 7.9 5.1 5.1
Dimensions, D + W + H mm 376 + 214 + 316 360 + 216 + 320 360 + 216 + 320
Type of calibration isoCAL isoCAL isoCAL

Milligram Balances
Model 613 513 313 213
Weighing capacity g 610 510 310 210
Readability g 0.001 0.001 0.001 0.001
Repeatability ±g 0.001 0.001 0.001 0.001
Linearity ±g 0.002 0.002 0.002 0.002
Typical s 1 1 1 1
stabilization time
Minimum sample weight g 1.5 1.5 1.5 1.5
as per USP, typical*
Weighing mm d120 d120 d120 d120
pan size
Net weight, approx. kg 5.1 5.1 5.1 5.1
Dimensions, D + W + H mm 360 + 216 + 320 360 + 216 + 320 360 + 216 + 320 360 + 216 + 320
Type of calibration isoCAL isoCAL isoCAL isoCAL

* in combination with YSP01SQP, high-performance weighing pan, 80 mm, slotted

** According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined as the range from 820 d to the maximum
weighing capacity. Depending on the installation location and environmental conditions, the value may be higher.
24 Laboratory Balances Secura®

Precision Balances
Model 6102 5102 3102 2102 1102 612
Weighing capacity g 6,100 5,100 3,100 2,100 1,100 610
Readability g 0.01 0.01 0.01 0.01 0.01 0.01
Repeatability ±g 0.01 0.01 0.01 0.01 0.01 0.01
Linearity ±g 0.02 0.02 0.02 0.02 0.02 0.02
Typical s 1 1 1 1 1 1
stabilization time
Minimum sample weight g 12 12 12 12 12 12
as per USP, typical*
Weighing pan size mm d180 d180 d180 d180 d180 d180
Net weight, approx. kg 5.2 5.2 5.2 5.2 5.2 5.2
Dimensions, D + W + H mm 360 + 216 + 360 + 216 +  360 + 216 + 360 + 216 +  360 + 216 +  360 + 216 +
 95 95  95 95 95  95
Type of calibration isoCAL isoCAL isoCAL isoCAL isoCAL isoCAL

Data interface mini USB

– Automatic recognition of Sartorius printer models YDP30 and YDP40
– Direct data transfer to Microsoft® application programs
– Programmable interval for data output
– Choice of SBI, xBPI, table format or text format data transfer protocols
APC functions – Monitoring if you are within the accepted operating range according to the requirements
(Advanced Pharma of the new USP, Chapter 41 – SQmin
Compliance) – Password protection of setup settings
– Fully automatic temperature- and time-controlled internal adjustment – isoCAL
– Temporary blockage of data transfer to printer or computer when uncertain weighing results
are detected, such as when you are out of the accepted operating range according to USP,
the balance is not levelled or isoCAL adjustment needs to be performed
– Storage of all calibration, adjustment and leveling procedures data – Cal Audit Trail
Leveling Intelligent, opto-electronic level sensor with alarm function and interactive user guidance
for reliable and safe leveling
Display Touch screen with Sartorius graphical user interface
Verified versions All models can be obtained with a type-approval certificate for use in legal metrology
as legal for trade

* According to USP (United States Pharmacopeia) Chapter 41, the optimal operating range is defined as the range from 820 d to the maximum
weighing capacity. Depending on the installation location and environmental conditions, the value may be higher.
Secura® Laboratory Balances 25
26 Laboratory Balances Quintix®

Quintix®
Standard Balances

Quintix® sets new benchmarks in every Applications

aspect for standard lab balances. A number Mixing, Components, Statistics, Weighing,
of features make your workflow much Density, Percentage, Checkweighing, Peak
more efficient, such as fully automatic Hold, Counting, Mass Unit Conversion and
internal adjustment, direct data transfer, Unstable Conditions.
ergonomic style and, above all, the entirely
new touch-screen user interface with Languages
built-in application programs. English, French, German, Hungarian, Italian,
Polish, Portuguese, Russian, Spanish, Turkish,
Description Chinese, Japanese and Korean.
Sartorius teamed up with experienced lab
users to develop the user interface of the Benefits
new Quintix®. Lab users’ No. 1 priority was –C  onvenient and intuitive operating
to ensure easy, intuitive operation without design with integrated application
having to read the manual first. They did it! programs
The self-explanatory icons and plain-text – GLP | GMP-compliant printout
prompts on the large touch screen show – F ully automatic isoCAL self-adjustment
you all the information you need to know functionality
for the procedure – no more, no less. – Chemically resistant housing

Experience easy and convenient data

­transfer to your PC without the need for
extra software. Quintix® substantially
­simplifies processing data in spreadsheets.
How? After connecting the USB port
on Quintix® to a computer, just open the
­Windows® application you need.

This Plug & Work technology in Quintix®

saves you considerable time and effort in
generating fast and reliable documents.
Achieve the highest accuracy and conve-
nience with fully automatic internal tem-
perature- and time-controlled adjustment
feature. Temperature fluctuations have an
influence on the accuracy of your weighing
results. This is why every Quintix® comes
equipped with the internal adjustment
function isoCAL that ensures consistently
accurate results. Each time isoCAL is
­performed, Quintix® records all data on
this procedure so it can be traced for
your quality assurance.
 Quintix® Laboratory Balances 27

Specifications
Semi-Micro Balances
Model 125D 65 35
Weighing capacity g 40|60|120 40|60 30
Readability mg 0.01|0.01|0.1 0.01|0.01 0.01
Repeatability ± mg 0.02|0.04|0.07 0.02|0.04 0.03
Linearity ± mg 0.1|0.1|0.2 0.1|0.1 0.1
Typical stabilization time s 6|6|2 6|6 6
Weighing pan size mm d 80 d 80 d 80
Net weight, approx. kg 7.8 7.8 7.8
Dimensions, D + W + H mm 376 + 214 + 316 376 + 214 + 316 376 + 214 + 316
Type of calibration isoCAL isoCAL isoCAL

Analytical Balances
Model 224 124 64
Weighing capacity g 220 120 60
Readability g 0.0001 0.0001 0.0001
Repeatability ±g 0.0001 0.0001 0.0001
Linearity ±g 0.0002 0.0002 0.0002
Typical stabilization time s 2 2 2
Weighing pan size mm d 90 d 90 d 90
Net weight, approx. kg 4.9 4.9 4.9
Dimensions, D + W + H mm 360 + 216 + 320 360 + 216 + 320 360 + 216 + 320
Type of calibration isoCAL isoCAL isoCAL

Milligram Balances
Model 613 513 313 213
Weighing capacity g 610 510 310 210
Readability g 0.001 0.001 0.001 0.001
Repeatability ±g 0.001 0.001 0.001 0.001
Linearity ±g 0.002 0.002 0.002 0.002
Typical stabilization time s 1 1 1 1
Weighing pan size mm d120 d120 d120 d120
Net weight, approx. kg 4.9 4.9 4.9 4.9
Dimensions, D + W + H mm 360 + 216 + 320 360 + 216 + 320 360 + 216 + 320 360 + 216 + 320
Type of calibration isoCAL isoCAL isoCAL isoCAL
28 Laboratory Balances Quintix®

Precision Balances
Model 6102 5102 3102 2102 1102 612 412 6101 5101 2101 6100 5100
Weighing capacity g 6,100 5,100 3,100 2,100 1,100 610 410 6,100 5,100 2,100 6,100 5,100
Readability g 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.1 0.1 0.1 1 1
Repeatability ±g 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.1 0.1 0.1 0.5 0.5
Linearity ±g 0.02 0.02 0.02 0.03 0.03 0.03 0.03 0.3 0.3 0.3 1 1
Typical stabilization time s 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Weighing pan size mm d180
Net weight, approx. kg 5.2 5.2 5.2 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
Dimensions, D + W + H mm 360 + 216 + 95
Type of calibration isoCAL

Data interface Mini USB

– Automatic recognition of Sartorius printer models YDP30 and YDP40
– Direct data transfer to Microsoft® application programs
– Programmable interval for data output
– Choice of SBI, xBPI, table format or text format data transfer protocols
Draft shield for – Analytical draft shield chamber with doors that glide open smoothly for
analytical balances fatigue-free weighing
– Interior chamber featuring spill-proof design; exceptionally easy to clean
– All panes can be individually cleaned or exchanged
Anti-theft device Kensington lock and lug for attaching a chain or a cable
Below-balance weighing Standard, built-in feature
Display Touch screen with Sartorius graphical user interface
Supervisor lock Menu lock for protection against unintentional changes
Verified versions All analytical, milligram and precision models (except 412 and 2101) can be obtained with
a type-approval certificate for use in legal metrology as legal for trade
Quintix® Laboratory Balances 29
30 Laboratory Balances Practum®

Practum®
Standard Balances

You can’t go wrong with the Practum®: including a calibration certificate, to help
a foolproof, exceptionally rugged and reli- ensure correct weighing results.
able lab balance. Practum® has everything
you need for standard applications. Applications
Weighing, Density, Percentage,
Description Checkweighing, Peak Hold, Counting
Get best the value for your money - and Unstable Conditions.
­without any compromises in precision and
reliability. Rely on consistent readings and Languages
excellent repeatability ensured by Sartorius English, French, German, Hungarian, Ital-
quality and technology developed and ian, Polish, Portuguese, Russian, Spanish,
­designed in Germany. Turkish, Chinese, Japanese and Korean.

Thanks to the convenient Plug & Work Benefits

technology, the USB port automatically – Consistent readings with excellent
detects when a Sartorius laboratory repeatability featured by Sartorius
printer is connected to the Practum®. This quality and technology
interface also enables you to transfer your – High reliability and durability based on
weighing data directly into a Microsoft® rugged design with integrated overload
Excel spreadsheet, without the need for protection feature
additional software. – Advanced operating design
– Supervisor lock to prevent unwanted
A calibrated balance is essential for setting changes
­obtaining reliable weighing results. – High-quality external calibration weight
­Therefore, every Practum® comes with a for traceable weighing results
high-quality external calibration weight,

Specifications
Analytical Balances
Model 224 124 64
Weighing capacity g 220 120 60
Readability g 0.0001 0.0001 0.0001
Repeatability ±g 0.0001 0.0001 0.0001
Linearity ±g 0.0002 0.0002 0.0002
Typical stabilization time s 2 2 2
Weighing pan size mm d 90 d 90 d 90
Net weight, approx. kg 4.5 4.5 4.5
Dimensions, D + W + H mm 360 + 216 + 320 360 + 216 + 320 360 + 216 + 320
External calibration 200 | E2 100 | E2 50 | E2
 Practum® Laboratory Balances 31

Milligram Balances
Model 513 313 213
Weighing capacity g 510 310 210
Readability g 0.001 0.001 0.001
Repeatability ±g 0.001 0.001 0.001
Linearity ±g 0.002 0.002 0.002
Typical s 1 1 1
stabilization time
Weighing mm d120 d120 d120
pan size
Net weight, approx. kg 4.9 4.9 4.9
Dimensions, mm 360 + 216 + 320 360 + 216 + 320 360 + 216 + 320
D + W + H
External calibration 200 | E2 200 | F1 200 | F1

Precision Balances
Model 3102 2102 1102 612 412 6101 5101 2101 6100 5100
Weighing g 3,100 2,100 1,100 610 410 6,100 5,100 2,100 6,100 5,100
capacity
Readability g 0.01 0.01 0.01 0.01 0.01 0.1 0.1 0.1 1 1
Repeatability ±g 0.01 0.01 0.01 0.01 0.01 0.1 0.1 0.1 0.5 0.5
Linearity ±g 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 1 1
Typical s 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1 1
stabilization
time
Weighing mm d180
pan size
Net weight, kg 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
approx.
Dimensions, mm 360 + 216 + 95
D + W + H
External 2,000 | F1 2,000 | F1 1,000 | F1 500 | F2 200 | F1 2,000 | F2 2,000 | F2 2,000 | F2 2,000 | F2 2,000 | F2
calibration

Data interface Mini USB

– Automatic recognition of Sartorius printer models YDP40
– Direct data transfer to Microsoft® application programs without any additional software
– Programmable interval for data output
– Choice of SBI, table format or text format data transfer protocols
Housing and Robust and easy-to-clean housing with easy-to-operate draft shield (where applicable)
draft shield
Anti-theft device Kensington lock and lug for attaching a chain or a cable
Below-balance weighing Standard, built-in feature
Display Touch screen with Sartorius graphical user interface
32 Laboratory Balances Entris®

Entris®
Standard Balances

Get the reliability and quality of a Sartorius Applications

balance, but only pay for the features you Weighing, Density, Percentage,
really need. Counting, Animal Weighing and Mass
Unit Conversion.
Entris® has been specially designed to
deliver effective and reliable weighing Languages
results in your daily work. The easy and English, French, German, Italian, Polish,
clearly structured user interface, the logical Russian and Spanish.
key assignment and excellent readability
are ideal features for error-free operation. Benefits
– Best price-performance ratio
Description – User-friendly guidance due to the
The backlit and high-contrast display built-in basic application programs
ensures excellent readability. Easy naviga- and function keys
tion with function keys and the simple- – Accurate and reliable weighing results
to-read level indicator on the front enable thanks to Sartorius quality and technology
user-friendly and fast operation. “Made in Germany”
– Rugged and compact design for ease
The top and side sliding doors and easy- of use
to-remove stainless steel parts of the draft – Draft shield easy to remove for fast and
shield chamber make Entris® convenient thorough cleaning
for thorough cleaning.

Each Entris® model is also available with an

internal, motorized adjustment function
for optimal weighing accuracy and operat-
ing convenience.
 Entris® Laboratory Balances 33

Specifications
Model Weighing Read- Repeat- Linearity Typical Weighing Dimensions Net Type of
capacity ability ability (± mg) stabili­zation pan size D × W × H weight calibration
(g) (mg) (± mg) time (s) (mm) (mm) approx.
(kg)
Analytical Balances
224i 220 0.1 0.1 0.2 2.5 d 90 303 × 230 × 330 4.8 Internal
224 220 0.1 0.1 0.2 2.5 d 90 303 × 230 × 330 4.4 External
124i 120 0.1 0.1 0.2 2.5 d 90 303 × 230 × 330 4.8 Internal
124 120 0.1 0.1 0.2 2.5 d 90 303 × 230 × 330 4.4 External
64i 60 0.1 0.1 0.2 2.5 d 90 303 × 230 × 330 4.8 Internal
64 60 0.1 0.1 0.2 2.5 d 90 303 × 230 × 330 4.4 External

Milligram Balances
623i 620 1 1 2 1.0 d 115 303 × 230 × 136 3.6 Internal
623 620 1 1 2 1.0 d 115 303 × 230 × 136 3.2 External
423i 420 1 1 2 1.0 d 115 303 × 230 × 136 3.6 Internal
423 420 1 1 2 1.0 d 115 303 × 230 × 136 3.2 External
323i 320 1 1 2 1.1 d 115 303 × 230 × 136 3.6 Internal
323 320 1 1 2 1.1 d 115 303 × 230 × 136 3.2 External
153i 150 1 1 2 1.3 d 115 303 × 230 × 136 3.0 Internal
153 150 1 1 2 1.3 d 115 303 × 230 × 136 2.6 External

Precision Balances
6202i 6,200 10 10 30 1.5 180 × 180 303 + 230 + 91 3.5 Internal
6202 6,200 10 10 30 1.5 180 × 180 303 + 230 + 91 3.1 External
4202i 4,200 10 10 30 1.5 180 × 180 303 + 230 + 91 3.5 Internal
4202 4,200 10 10 30 1.5 180 × 180 303 + 230 + 91 3.1 External
3202i 3,200 10 10 30 1.5 180 × 180 303 + 230 + 91 3.5 Internal
3202 3,200 10 10 30 1.5 180 × 180 303 + 230 + 91 3.1 External
2202i 2,200 10 10 30 1.5 180 × 180 303 + 230 + 91 3.5 Internal
2202 2,200 10 10 30 1.5 180 × 180 303 + 230 + 91 3.1 External
822i 820 10 10 30 1.5 d 150 303 + 230 + 87 2.6 Internal
822 820 10 10 30 1.5 d 150 303 + 230 + 87 2.0 External
8201i 8,200 100 100 300 1.5 180 × 180 303 + 230 + 91 3.5 Internal
8201 8,200 100 100 300 1.5 180 × 180 303 + 230 + 91 2.7 External
5201i 5,200 100 100 300 1.5 180 × 180 303 + 230 + 91 3.5 Internal
5201 5,200 100 100 300 1.5 180 × 180 303 + 230 + 91 2.7 External
2201i 2,200 100 100 300 1.5 180 × 180 303 + 230 + 91 3.5 Internal
2201 2,200 100 100 300 1.5 180 × 180 303 + 230 + 91 2.7 External
34 Laboratory Balances Accessories Secura®, Quintix®, Practum® and Entris®

Accessories for Secura®, Quintix®, Practum® and Entris®

Ordering Information
Printer

Item Description Secura® Quintix® Practum® Entris®

YDP30 Premium GLP lab printer
- 69Y03285 Printer paper for GLP lab printer
- 69Y03286 Continuous labels for
GLP lab printer
Premium GLP Lab Printer
YDP40 Standard lab printer
- 69Y03287 Standard thermosensitive paper
for standard lab printer
- 69Y03288 Self-adhesive thermosensitive
paper for standard lab printer
YDP20-0CE Data printer
- 6906937 Paper rolls, 5 units,
each with 40 m
- 6906918 Ink ribbon cassette

Standard Lab Printer

Data Communication Cable

Item Description Secura® Quintix® Practum® Entris®

YCC04-D09 Data cable, mini USB | USB A
YCC03-D09 Data cable, mini USB | RS232
9-pin
YCC03-D25 Data cable, mini USB | RS232
25-pin
YCC01-USBM2 Data cable, RS-232 | USB

Density Kit YDK03

Density Kit

Item Description Secura® Quintix® Practum® Entris®

YDK05 Density kit for 0.01 mg balances
YDK03 Density kit for
0.0001 g | 0.001 g balances
YDK04 Density kit for 0.01 g balances
YDK01LP Density kit for
0.0001 g balances

Weighing Pans

Item Description Secura® Quintix® Practum® Entris®

YSP01SQP High-performance weighing
pan, 80 mm, slotted,
for 0.01 mg balances
YWP01SQP Weighing pan, 90 mm,
­conversion kit for 0.01 mg
balances included
YFW01SQP Filter weighing pan, 130 mm,
conversion kit for 0.01 mg
balances included
 Accessories Secura®, Quintix®, Practum® and Entris® Laboratory Balances 35

Transportation Boxes

Item Description Secura® Quintix® Practum® Entris®

YDB-SECURA-5 Demo box for 0.01 mg balances
YDB-SECURA Demo box for 0.0001 g | 0.001 g
balances
YDB-SECURA-P Demo box for 0.01 g balances

Round Glass Draft Shield General

Item Description Secura® Quintix® Practum® Entris®

YRB11Z Rechargeable battery pack for
standard lab balances
YDS01SQP Draft shield for 0.01 g | 0.1 g | 
1 g balances
YDS02SQP Round glass draft shield for
0.001 g balances
6960MA03 In-use cover for 0.01 mg
balances
Stat-Pen Ionization Probe
6960SE01 In-use cover for 0.0001 g | 
0.001 g balances
6960SE02 In-use cover for 0.01 g balances
6960SE03 In-use cover for 0.0001 g | 
0.001 g balances
6960SE04 In-use cover for 0.01 mg
balances
6960ED01 In-use cover for models with
a rectangular weighing pan
6960ED02 In-use cover for models with
Rechargeable Battery Pack a round weighing pan

Anti-static Accessories

Item Description Secura® Quintix® Practum® Entris®

YIB01-0DR Ionization blower to eliminate
electrostatic charges on sample
containers and samples
YSTP01 Stat-Pen ionization probe for
discharging electrostatically
charged samples and filters

Furniture

Item Description Secura® Quintix® Practum® Entris®

YWT09 Balance table, wood with
synthetic stone plate for
­precise, reliable weighing
operations
YWT03 Balance table, cast stone,
with vibration dampeners
YWT04 Wall console for micro,
analytical and precision balances
 Introduction Introduction Moisture Analyzers 37

Intro

Moisture Analyzers
Table of Contents

39 MA160
41 MA37
43 LMA200PM
45 MA100
38 Moisture Analyzers Introduction

The moisture content of a material is an important

parameter and affects the usability, the processibility,
stability and shelf life of the product. Moisture plays
a significant role for the quality of food, pharmaceutical,
cosmetic, healthcare and chemical products as well
as in environmental control. The determination of the
moisture content of these materials in development
and production is indispensable. Moisture is a price-­
determining factor, and most materials have an
optimal content.

This means that every manufacturing industry needs

to be able to determine the moisture content fast and
reliably at each different level of a production process.
This enables machine operators to correct a process
on time to maintain quality.

Thermogravimetric moisture analyzers are the ideal

choice for fast and precise determination of the
­moisture content. The loss in weight of the sample is
­determined by weighing and heating with an infrared
heater. The loss on drying is continuously recording
and analysis is automatically switched off when the
­drying endpoint has been reached and the final result
is calculated and displayed.

The analyzer needs to accommodate the various

­requirements of the sample and user. Pasty or liquid
samples require parameters that are different from those
needed by solid or dry samples. The required measure-
ment speed, resolution and flexibility of a device need to
be considered as well as the place of analysis – inside
a production facility or in a QC laboratory.

Sartorius offers a broad range of moisture analyzers

that address these different sample requirements and
customer needs. These moisture analyzers deliver fast,
easy and accurate results for process and quality control
applications. You can choose from the user-friendly
basic model to our high-end moisture analyzer.
 MA160 Moisture Analyzers 39

MA160
Manages Your Sophisticated Tasks

For the quality of a product the content Benefits

of moisture is an important factor and – High-speed measurements –
its determination is one of the common for fast and accurate results
analyses in product development and – Fast method development – solves the
the manufacturing process. The different time-consuming problem of determining
requirements of speed, resolution of the and evaluating the right parameters
values measured or the operating – Reliable performance testing –
design of a moisture analyzer must always it guarantees reliable results during
be considered. routine work
– User-friendly operation – easy-to-
Description understand menu simplifies the
The MA160 uses the thermogravimetric use of the MA160
method to determine the moisture content
of liquid, pasty and solid substances –
conveniently, reliably and in a minimum
amount of time. It delivers prompt, repeat-
able results and supports the development
of new methods. The MA160 manages the
generated methods professionally and
allows the transfer to other instruments.

A lamp indicates the current measurement

status and the ergonomic BetterClean
­design enables simple cleaning of
the device.

Using the performance testing, the

MA160 verifies its functionality – ensuring
continuously flawless performance.

Applications
The MA160 is ideal for the moisture
­analysis of a varying range of samples.
­Typical areas of applications include
­moisture analysis of foods, beverages,
pharmaceuticals, chemicals, paper
­materials and determination of the
­environmental moisture content.
40 Moisture Analyzers MA160

Specifications
Model MA160-1
Max. weighing capacity 200 g
Repeatability, typical For an initial sample weight of approx. 1 g: ±0.2%
For an initial sample weight of approx. 5 g: ±0.05%
Readability 1 mg, 0.01%
Typical sample quantity 5 g to 15 g
Reading display Moisture content in % M and % g | dry matter (solids) in %
S and g | RATIO in % M/S
Temperature range 40°C to 160°C in 1°C increments
and settings Standby temperature selectable from 40 to 100°C
Sample heating Infrared heating by an AURI heater, 600 W
Heating programs Standard drying, gentle drying
Shutoff parameter Fully automatic, semi-automatic, manual and with
timer settings
Tongs for samples For easy handling of sample pans
Interface Mini USB port, automatic printer detection, direct data
transfer to Microsoft® programs
Data transfer SD card, method import and export function
Housing dimensions 215 mm + 400 mm + 210 mm
(W + D + H)
Weight Approx. 6.2 kg

Ordering Information
Accessories
6965542 Disposable sample pans, 80 units, aluminum, 90 mm diameter
6906940 Glass fiber pad for analysis of pasty and fatty samples, hard
quality, 80 units, 90 mm diameter
6906941 Glass fiber pad for analysis of liquid and fatty samples, soft
quality, 200 units, 90 mm diameter
YHP01MA ReproEasy pads, 10 pcs. for performance testing to verify
the repeatability of the moisture analyzer
YST01MA Tongs for handling sample pans
YCW452-AC-02 External calibration weight, 50 g (E2) with DAkkS certificate*
YDP30 Premium GLP laboratory printer
YDP40 Standard printer
YCC03-D09 Adapter cable for connecting the YDP20-0CE printer

* formerly known as DKD; DAkkS is the Germany’s national accreditation body;

DAkkS calibration certificates are internationally recognized
 MA160 Moisture Analyzers 41

MA37
Your Reliable Partner for Routine Tasks

The MA37 is a next-generation moisture Benefits

analyzer and continues the success story of – Quick measurements – fast results
the MA35. The MA37 delivers fast, accurate – Effortless cleaning – easily clean
results and is easy to operate. ­instrument parts thoroughly
– Clear display of measurement status –
Description easy to track the measurement status
The MA37 is a compact device. Its – User-friendly operation – easy-to-
­BetterClean design ensures effortless understand menu simplifies the
cleaning. The status light makes it use of the MA160
easy to track the current progress of
the measurement.

Therefore, the MA37 is ideal for users who

require a fast, reliable moisture analyzer
that is easy to operate and clean.

Applications
Typical areas of application include
­moisture analysis of foods, beverages,
pharma­ceuticals, chemicals, paper
­materials and determination of environ-
mental moisture content.
42 Moisture Analyzers MA37

Specifications
Model MA37-1
Max. weighing capacity 70 g
Repeatability, typical For an initial sample weight of approx. 1 g: ± 0.2%
For an sample weight approx. > 5 g: ± 0.05%
Readability 1 mg, 0.01%
Typical sample quantity 5 g to 15 g
Reading display Moisture content in % M and % g | dry matter (solids) in %
S and g | RATIO in % M/S
Temperature range and 40°C–160°C, in 1-degree increments
settings Standby temperature selectable from 40 to 100°C
Sample heating Infrared heating by a metal tube heater
Heating programs Standard drying, gentle drying
Shutoff parameter Fully automatic, semi-automatic, manual and with timer
settings
Access to sample Removable hood with wide opening angle, SoftClose
chamber mechanism
Measuring program 1 program saved in a non-volatile memory (user-selectable
method parameters)
Memory for data storage Results are saved until the start of the next measurement
Sample inspection LED-illuminated sample chamber, inspection window
with a grid above the hood
Interface Mini USB port, automatic printer detection, direct data
transfer to Microsoft® programs
Housing dimensions 215 mm + 400 mm + 210 mm
(W + D + H)
Weight Approx. 6.2 kg

Ordering Information
Accessories
6965542 Disposable sample pans, 80 pcs., aluminum, 90 mm diameter
6906940 Glass fiber pads for analysis of pasty and fatty samples, hard
quality, 80 units, 90 mm diameter
6906941 Glass fiber pad for analysis of liquid and fatty samples, soft
quality, 200 units, 90 mm diameter
YST01MA Tongs for handling sample pans
YCW452-AC-02 External calibration weight, 50 g (E2) with DAkkS certificate*
YDP30 Premium GLP laboratory printer
YDP40 Standard printer
YCC03-D09 Adapter cable for connecting the YDP20-0CE printer

* formerly known as DKD; DAkkS is the Germany’s national accreditation body;

DAkkS calibration certificates are internationally recognized
 LMA200PM Moisture Analyzers 43

LMA200PM
Speed Meets Analytical Precision

For samples with a high moisture content, Applications

microwave drying is the fastest and most The LMA200 is ideal for samples with a
effective thermogravimetric method for moisture content of 8% to 100% moisture.
moisture analysis. Developed for analyzing Typical areas of application include
moisture content ranging from approx. ­moisture analysis of foods, beverages,
8% to 100%, the LMA200PM performs pharmaceuticals and determination
moisture analysis in a fraction of the time of environmental moisture content.
it takes for other methods.
Benefits
Description – Ultra-high-speed measurements –
The LMA200 delivers results between exceptionally fast and accurate results
approx. 40 and 120 seconds on average. in seconds
With a cylindrical design, a focused emis- – Endpoint determination determination –
sion of microwave energy is channeled ver- fully automatic analysis
tically through dual apertures at the bot- – Weighing system – very precise and
tom of the chamber. This concentrates the ­accurate results
microwave energy specifically onto the – Easy to operate – easy-to-understand
sample. During the test, a carousel spins menu
the sample, permitting even distribution of
microwave energy. This prevents hot
and cold spots from occurring, a familiar
problem with conventional microwave
analyzers.

The analytical weighing system with 0.1 mg

resolution enables the LMA200 to be used
for high-precision analysis. Intelligent
­endpoint determination simplifies analysis
of the sample.
44 Moisture Analyzers LMA200PM

Specifications
Model LMA200PM
Weighing capacity (g) 70
Measuring accuracy of the 0.0001
weighing system (g)
Reproducibility on average ± 0.05
for initial sample weight
starting at approx. 1 g (%)
Sample carriers 90 mm diameter (31“) glass fiber pads
Display modes % moisture, ppm moisture, % volatile components,
% dry weight (solids), ppm dry weight, g dry weight,
mg loss on drying, % RATIO
Measuring range Approx. 8 to 100% moisture
Sample heating Microwave generator with 1,000 W input power
Power control for heating 2 to 100%, adjustable in 1% increments
Endpoint determination – Fully automatic, by means of sensors for mass
and moisture
– User-defined as loss of weight/time:
1 mg to 50 mg | 1 sec. to 99 sec.
0.1% to 9.9% | 1 sec. to 99 sec.
– Timer mode: 0.1 min. to 99.9 min.
Analysis time (in seconds) Approx. 40 to 120 (depends on sample and moisture)
Programs 320 saved to non-volatile memory
Data printer Thermal printer, built-in
Moisture analysis report – User-configured GLP record
– The report can be printed on non-fading paper by the
built-in thermal printer.
Operator guidance – Menu-driven, alphanumeric, interactive text prompts
(English, French, German, Italian and Spanish selectable)
– 5 pre-programmed function keys
Data interfaces – 1 + RS-232 port for PC
– 1 + Ethernet port
Housing dimensions (mm | in.) 510 + 535 + 304 | 20 + 21 + 12
W + D + H
Weight, approx. (kg | lb) 22 | 48.5
Power source 230 V, 50 Hz, 1,200 VA (LMA200PM-000EU)
120 V, 60 Hz, 1,200 VA (LMA200PM-000US)
Power consumption (VA) 1,200 max.

Ordering Information
Accessories
6906941 Glass fiber pads, for moisture analysis of liquid, pasty or
fatty ­samples (200/box), soft quality
69M30100 Thermo-sensitive paper, 5 rolls/package
YAT01MA Disposable pipettes, box of 500
 MA100 Moisture Analyzers 45

MA100
Speed Meets Analytical Precision

The MA100 moisture analyzer features the Benefits

highest measuring accuracy and precision – Quick and exceptionally precise
for a thermogravimetric moisture analyzer. ­measurements – fast and highly
accurate results
Description – Easy access to sample chamber –
With the accuracy of an analytical balance, makes it easy to clean the analyzer
the MA100 delivers exact results within – Internal calibration – supports
minutes and has excellent reproducibility. ­compliance with GLP standards
On top of this, its extensive functions – Easy to operate – easy-to-understand
offer a high level of flexibility to meet menu
frequently changing requirements on the
parameters of different types of samples or
on the sequence of analysis. The MA100
moisture analyzer is perfect for quality
control and research and development.

Applications
The MA100 is ideal for samples with a
­relatively low moisture content of 1% to
10% like plastics or chemicals. It is also
­excellently suited to moisture measure-
ment of samples such as pharmaceuticals
or healthcare products, paints, foods,
­beverages and for determination of the
­environmental moisture content.
46 Moisture Analyzers MA100

Specifications
Model MA100C | MA100Q
(Heating Elements C = Ceramic, Q = Quartz)
Max. weighing capacity 100 g
Repeatability, typical For an initial sample weight of approx. 1 g: ± 0.1%
For an initial sample weight of approx. 5 g: ± 0.02%
Readability 1 mg, 0.01% | 0.1 mg, 0.001%
Typical sample quantity 5 g to 15 g
Reading display % moisture content (optionally available with conversion
factor) | % dry weight | RATIO | mg weight loss | g residue | 
g/kg residue | g/l residue
Temperature range 30°C to 230°C, stand-by temperature selectable from
and settings 30°C to 100°C in 1-degree increments
Sample heating Infrared heating using a coiled quartz heating element (CQR)
Heating programs Standard, quick, gentle and phase drying
Shutoff criteria Optional:
– Fully automatic
– SPRM mode (optimization to a reference system)
– Semi-automatic (1 mg to 50 mg | 5 sec. to 300 sec.)
– Semi-automatic (0.1% to 5.0% | 5 sec. to 300 sec.)
– Timer setting (3 + 0.1 min. to 999 min.)
– Timer setting + fully/semi-automatic (2 + 0.1 min. to
999 min.) + automatic)
– Manual
Access to sample chamber Motorized cover
Measuring program 30 programs saved in a non-volatile memory
(user-selectable parameters)
Data storage Statistics on results for the last 9,999 measurements/program
Operator guidance Menu-driven, alphanumeric, interactive text prompts
features (5 languages selectable)
Parameter | data entry – Optimized text input via soft keys
– Numeric input via keypad
– Optional data input via barcode scanner
Report printout – Printout using the optional, internal printer YDP01MA
– Configurable GLP report for measuring results | calibration | 
adjustment (5 languages selectable)
 MA100 Moisture Analyzers 47

Test equipment – Internal calibration weight

monitoring – Automatic reproTEST for the weighing system
– Automatic temperature calibration with optional
temperature adjustment set, YTM03MA
– Documentation in accordance with the applicable quality
assurance requirements
Safety Parameter settings password-protected against
unauthorized access
Voltage frequency 48 to 60 Hz
Power consumption Max. 700 VA
Operating temperature 10°C to 30°C
range
Housing dimensions 350 mm + 453 mm + 156 mm
(W + D + H)
Weight Approx. 8.0 kg

Ordering Information
Accessories
6965542 Disposable sample pans, aluminum, round (80/box)
6906940 Glass fiber pads, for moisture analysis of liquid, pasty, greasy
or fatty samples (80/box), hard quality
6906941 Glass fiber pads, for moisture analysis of liquid, pasty, greasy
or fatty samples (200/box), soft quality
YCW4528-02 External calibration weight, 1 + 50 g, E2 with
DAkkS certificate*
YDP01MA Internal data printer, integrated into the device
YDP20-0CE Data printer, external, verified for use in legal metrology;
with date, time, statistics and transaction counter functions
6906918 Ink ribbon cassette, for YDP20-0CE and YDP01MA
6906937 Paper rolls for data printer, 5 rolls, 50 m each

* formerly known as DKD; DAkkS is the Germany’s national accreditation body;

DAkkS calibration certificates are internationally recognized
 Introduction Mass Comparators 49

Intro

Mass Comparators
Table of Contents

51 Cubis® MCM
50 Mass Comparators Introduction

The new Cubis® MCM manual mass comparators are the

first devices on the market that ­combine metrological
weighing expertise and integrated control of workflows
in line with the recommendations of the Inter­national
Organization of Legal Metrology (OIML). In the OIML
R111-1 International Recommendation, this organiza-
tion defines metrological and technical requirements.

A total of 14 Cubis® MCM manual mass comparators are

available with maximum capacities from 6.1 g to 64 kg
and readabilities from 0.1 µg to 10 mg. All models with
draft shields are supplied standard with a climate
module equipped with climate sensors for temperature,
humidity and air pressure. For mass comparator models
without a draft shield, an external climate module
with the appropriate sensors is included as part of the
equipment supplied. A DAkkS* calibration certificate
can be provided for the climate sensors on request.

* DAkkS is the Germany’s national accreditation body;

DAkkS calibration certificates are internationally recognized
 Cubis® MCM Mass Comparators 51

Cubis® MCM

Integrated Workflow Control The Fastest Mass Comparison Cycles

Integrated workflow control in the Compared with conventional units,
Cubis® MCM manual mass comparators Cubis® MCM mass comparators are by far
minimizes operating error rates: the fastest in ­completing ABA, ABBA or
During a measurement process, the mass AB1…BnA cycles to determine the
comparator provides user guidance conventional mass and its combined
prompts and instructions about the next standard uncertainty.
step to perform. This significantly reduces
the “human” factor that can compromise The manual mass comparators can
the accuracy of mass determination, seamlessly be integrated in the infra­
making results more reliable. At the same structure of mass standards laboratory.
time, the Cubis® MCM ensures optimal, Based on the Cubis® Q-Com communica-
user-friendly workflows to reduce stress tion concepts, they can be integrated
on operators. in existing networks and any type of data
desired can be transferred to other devices.
Integrated Climate Sensors
The sensors integrated in the mass
comparator automatically log c­ limate data
like temperature, air pressure and humidity
for ­calculating the air buoyancy ­correction
at the site of m
­ easurement. This climate
data can be documented on a computer
so that you can check at any time that the
limits on ­temperature, air pressure and
humidity for the respective calibration
levels are in compliance for accuracy
classes E1, E2, F1 or F2.
52 Mass Comparators Cubis® MCM

Specifications and Ordering Information

Cubis® MCM up to 1 kg

Order number, with calibrated MCM6.7-DAkkS MCM36-DAkkS MCM66-DAkkS MCM106-DAkkS

climate sensors and DAkkS
certificate
Order number, with uncalibrated MCM6.7 MCM36 MCM66 MCM106
climate sensors
Design 1 2 2 2
Maximum capacity 6.1 g 31 g 61 g 111 g
Readability 0.1 µg 1 µg 1 µg 1 µg
Range of use 0 to 6 g 0 to 30 g 0 to 60 g 0 to 111 g

Repeatability “s”
– under optimal conditions 1) 0.15 µg 1 µg 1 µg 1 µg
– under standard conditions E 2) 0.3 µg 1.5 µg 2 µg 2 µg
– at 1/3 load 2) 0.2 µg
– at 1/10 load 2) 0.7 µg 0.7 µg 0.7 µg
– under standard conditions F 3) 0.6 µg 4 µg 5 µg 5 µg
Electronic weighing | tare range 6.1 g 31 g 61 g 61 g
Substitution weights 50 g
Linearity 1 µg 6 µg 8 µg 8 µg
Eccentric (off-center) load deviation 0.25 µg / mm 1 µg / mm 1 µg / mm 1 µg / mm
Stabilization time 10 s 3s 3s 5s
Cycle time (ABA) 90 s 90 s 90 s 90 s

Standard Accessories
Data interfaces RS-232C, USB, Ethernet, SD card (optional RS-232C, PS2, Bluetooth®)
Draft shield • • • •
Additional application programs Weighing, mass unit conversion, individual identifiers, density determination, statistics
Port for below-balance • • • •
weighing hook
Climate sensors Integrated into draft shield
 Cubis® MCM Mass Comparators 53

Cubis® MCM up to 1 kg

Optional Accessories
Calibration weight 5 g | E2 20 g | E2 50 g | E2 50 g | E2
YCW352-00 YCW422-00 YCW452-00 YCW452-00
2nd draft shield YDS20C YDS24C YDS24C YDS24C
Balance table YWT03 YWT03 YWT03 YWT03

Dimensions
Weighing pan size 16 mm dia. 30 mm dia. 30 mm dia. 50 mm dia.
Maximum object size (D × H) 16 × 70 mm 30 × 120 mm 30 × 120 mm 50 × 120 mm
Weigh cell (W × D × H) 122 × 343 × 141 mm 222 × 431 × 301 mm 222 × 431 × 301 mm 222 × 431 × 301
mm
Electronic unit (W × D × H) 239 × 320 × 56 mm 239 × 320 × 56 mm 239 × 320 × 56 mm 239 × 320 × 56 mm

Repeatability is the standard deviation “s”; it is calculated from 5 ABA cycles under the following conditions:
1)
 ptimal conditions: Automatic measurement without operator influence measured in a laboratory under E1 conditions,
O
on a decoupled weighing stone, no drafts from above
2)
S tandard conditions E: Measurement performed manually under a laboratory under E1 conditions, on a decoupled
weighing stone, no drafts from above
3)
S tandard conditions F: Measurement performed manually under a laboratory under at least F1 conditions,
on a non-decoupled weighing stone, air conditioning and minimal drafts from above
54 Mass Comparators Cubis® MCM

Cubis® MCM up to 1 kg

Order number, with uncalibrated MCM605 MCM1005 MCM1004

climate sensors
Order number, with calibrated MCM605-DAkkS MCM1005-DAkkS MCM1004-DAkkS
climate sensors and DAkkS
certificate
Design 3 3 3
Maximum capacity 610 g 1,110 g 1,110 g
Readability 0.01 mg 0.01 mg 0.1 mg
Range of use 0 to 610 g 0 to 1,110 g 0 to 1,110 g

Repeatability “s”
– under optimal conditions 1) 10 µg 15 µg 0.05 mg
– under standard conditions E 2) 20 µg 20 µg 0.07 mg
– at 1/3 load 2) 15 µg
– at 1/10 load 2) 10 µg 15 µg 0.05 mg
– under standard conditions F 3) 30 µg 50 µg 0.2 mg
Electronic weighing | taring range 610 g 610 g 610 g
Substitution weights 500 g 500 g
Linearity 100 µg 100 µg |  600 g 0.1 mg |  600 g
Eccentric (off-center) load 10 µg / mm 15 µg / mm 30 µg / mm
deviation
Stabilization time 5s 5s 3s
Cycle time (ABA) 90 s 90 s 90 s

Standard Accessories
Data interfaces RS-232C, USB, Ethernet, SD card (optional RS-232C, PS2, Bluetooth®)
Draft shield • • •
Additional application programs Weighing, mass unit conversion, individual identifiers, density determination, statistics
Port for below-balance • • •
weighing hook
Climate sensors Integrated into draft shield
 Cubis® MCM Mass Comparators 55

Cubis® MCM up to 1 kg

Optional Accessories
Calibration weight 500 g | E2 YCW552-00 500 g | E2 500 g | E2
YCW552-00 YCW552-00
2nd draft shield YDS24C YDS24C YDS24C
Balance table YWT03 YWT03 YWT03

Dimensions
Weighing pan size 90 mm dia. 90 mm dia. 90 mm dia.
Maximum object size (D × H) 135 × 140 mm 135 × 140 mm 135 × 140 mm
Weigh cell (W × D × H) 222 × 431 × 301 mm 222 × 431 × 301 mm 222 × 431 × 301 mm
Electronic unit (W × D × H) 239 × 320 × 56 mm 239 × 320 × 56 mm 239 × 320 × 56 mm

Repeatability is the standard deviation “s”; it is calculated from 5 ABA cycles under the following conditions:
1)
Optimal conditions: automatic measurement without operator influence measured in a laboratory under E1 conditions,
on a decoupled weighing stone, no drafts from above
2)
Standard conditions E: measurement performed manually in a laboratory under E1-conditions, on a decoupled weighing stone,
no drafts from above
3)
S tandard conditions F: measurement performed manually in a laboratory under at least F1 conditions, on a non-decoupled weighing stone,
air conditioning and minimal drafts from above
56 Mass Comparators Cubis® MCM

Cubis® MCM 2 kg to 10 kg

Order number, with uncalibrated MCM2004 MCM5004 MCM5003 MCM10K3

climate sensors
Order number, with calibrated MCM2004-DAkkS MCM5004-DAkkS MCM5003-DAkkS MCM10K3-DAkkS
climate sensors and DAkkS
certificate
Design 4 4 4 5
Maximum capacity 2,500 g 5,100 g 5,100 g 11 kg
Readability 0.1 mg 0.2 mg 1 mg 1 mg
Range of use 0 to 2,500 g 0 to 5,100 g 0 to 5,100 g 0 to 11 kg

Repeatability “s”
– under optimal conditions 1) 0.05 mg 0.3 mg 0.5 mg 0.8 mg
– under standard conditions E 2) 0.1 mg 0.5 mg 0.8 mg 1 mg
– at 1/3 load 2)
– at 1/10 load 2) 0.07 mg 0.3 mg 0.5 mg 0.8 mg
– under standard conditions F 3) 0.3 mg 0.8 mg 1.5 mg 3 mg
Electronic weighing | tare range 2,500 g 5,100 g 5,100 g 11 kg
Substitution weights 50 g
Linearity 1 mg 2 mg 3 mg 6 mg
Eccentric (off-center) load 30 µg / mm 151 µg / mm 300 µg / mm 0.5 mg / mm
deviation
Stabilization time 3s 3s 3s 3s
Cycle time (ABA) 90 s 90 s 90 s 90 s

Standard Accessories
Data interfaces RS-232C, USB, Ethernet, SD card (optional RS-232C, PS2, Bluetooth®)
Draft shield • • •
Additional application programs Weighing, mass unit conversion, individual identifiers, density determination, statistics
Port for below-balance • • • •
weighing hook
Climate sensor Integrated into draft shield Can be connected
externally
 Cubis® MCM Mass Comparators 57

Cubis® MCM 2 kg to 10 kg

Optional Accessories
Calibration weight 2 kg | E2 5 kg | E2 5 kg | E2 10 kg | E2
YCW622-00 YCW652-00 YCW652-00 YCW712-00
2nd draft shield YDS24C YDS24C YDS24C YDS24C
Balance table YWT03 YWT03 YWT03 YWT03
Lifting device for 10 kg YAW51
Lifting device for 20 kg

Dimensions
Weighing pan size (W × D) 136 × 136 mm 136 × 136 mm 136 × 136 mm 200 × 200 mm
maximum object size (D × H) 130 × 200 mm 130 × 200 mm 130 × 200 mm
Weigh cell (W × D × H) 240 × 276 × 373 mm 240 × 276 × 373 mm 240 × 276 × 373 mm 240 × 276 × 102 mm
Electronic unit (W × D × H) 239 × 320 × 56 mm 239 × 320 × 56 mm 239 × 320 × 56 mm 239 × 320 × 56 mm

Repeatability is the standard deviation “s”; it is calculated from 5 ABA cycles under the following conditions:
1)
Optimal conditions: automatic measurement without operator influence measured in a laboratory under E1 conditions,
on a decoupled weighing stone, no drafts from above.
2)
Standard conditions E: measurement performed manually in a laboratory under E1 conditions, on a decoupled weighing stone,
no drafts from above
3)
Standard conditions F: measurement performed manually in a laboratory under at least F1 conditions, on a non-decoupled weighing stone,
air conditioning and minimal drafts from above
58 Mass Comparators Cubis® MCM

Cubis® MCM 2 kg to 10 kg

Order number, with uncalibrated MCM40K3 MCM60K3 MCM60K2

climate sensors
Order number, with calibrated MCM40K3-DAkkS MCM60K3-DAkkS MCM60K2-DAkkS
climate sensors with DAkkS
certificate
Design 6 6 6
Maximum capacity 41 kg 64 kg 64 kg
Readability 1 mg 2 mg 10 mg
Range of use 0 kg to 41 kg 0 kg to 64 kg 0 kg to 64 kg

Repeatability s
– under optimal conditions 1) 2 mg 4 mg 6 mg
– under standard conditions E 2) 3 mg 6 mg 10 mg
– at 1/3 load 2)
– at 1/10 load 2) 2 mg 4 mg
– under standard conditions F 3) 6 mg 10 mg 25 mg
Electronic weighing | tare range 41 kg 64 kg 64 kg
Linearity 20 mg 40 mg 50 mg
Eccentric (off-center) load 3.5 mg / mm 3.5 mg / mm 3.5 mg / mm
deviation
Stabilization time 5s 5s 5s
Cycle time (ABA) 120 s 120 s 120 s

Standard Accessories
Data interfaces RS-232C, USB, Ethernet, SD card (optional RS-232C, PS2, Bluetooth®)
Additional application programs Weighing, mass unit conversion, individual identifiers, density determination, statistics
Port for below-balance with opt. accessories with opt. accessories with opt. accessories
weighing hook 69EA0040 69EA0040 69EA0040
Climate sensor Can be connected externally
 Cubis® MCM Mass Comparators 59

Cubis® MCM 40 kg to 60 kg

Optional Accessories
Calibration weight 20 kg | E2 50 kg | E2 50 kg | E2
YCW722-00 YCW752-00 YCW752-00
2nd draft shield YDS05C | YDS03C YDS05C | YDS03C YDS05C | YDS03C
Lifting device for 10 kg YAW51 YAW51 YAW51
Lifting device for 20 kg YAW52 YAW52 YAW52
Lifting device for 50 kg YAW53 YAW53
Crane with chain hoist YLD01C YLD01C
Gripper for weights with handle YLD02C YLD02C
Floor-mounted column, stainless steel

Dimensions
Weighing pan size (W × D) 400 × 300 mm 400 × 300 mm 400 × 300 mm
Weigh cell (W × D × H) 400 × 326 × 126 mm 400 × 326 × 126 mm 400 × 326 × 126 mm
Electronic unit (W × D × H) 239 × 320 × 56 mm 239 × 320 × 56 mm 239 × 320 × 56 mm

Repeatability is the standard deviation “s”; it is calculated from 5 ABA cycles under the following conditions:
1)
Optimal conditions: automatic measurement without operator influence measured in a laboratory under E1 conditions, on a decoupled weighing
stone, no drafts from above.
2)
Standard conditions E: measurement performed manually in a laboratory under E1 conditions, on a decoupled weighing stone, no drafts from
above
3)
Standard conditions F: measurement performed manually in a laboratory under at least F1 conditions, on a non-decoupled weighing stone,
air conditioning and minimal drafts from above

Accessories for Cubis® MCM Mass Comparators

Replacement climate module, uncalibrated, for all MCM models YCM20MC
Calibration of a climate module YCM20MC with DAkkS calibration certificate YCM20DAkkS
Replacement climate module with DAkkS calibration certificate for all MCM models YCM20MC-DAkkS
Hook for below-balance weighing, for models MCM40K3, MCM60K3, MCM60K2, 69EA0040
MCM40K3-DAkkS, MCM60K3-DAWKS and MCM60K2-DAkkS
Tower for climate module, for mounting YCM20MC; can be ported to the following models: YCM20MC Tower
MCM10K3, MCM40K3, MCM60K3, MCM60K2, MCM10K3-DAkkS, MCM40K3-DAkkS,
MCM60K3-DAkkS and MCM60K2-DAkkS, connecting cable included
 Introduction
Weights Weights and Weight Sets 61

Weights and Weight Sets

Table of Contents

63 Reference Line Weights

66 Reference Line Weight Sets
68 Proof Line Weights
72 Proof Line Weight Sets
74 Special Weight Sets and Service Weight Sets
75 Cylindrical Weights
76 Accessories for Cleaning and Handling of Weights
77 Accessories for Storage of Weights
62 Weights and Weight Sets Introduction

Regular inspection and testing of weighing

instruments are essential to ensure reliable weighing
results. Sartorius offers highly accurate metrological
weights and weight sets with nominal mass values
from 1 mg to 1,000 kg, special and test weights, as well
as the right accessories required for correct handling,
storage and cleaning of weights.

For unique identification and classification, all

Sartorius weights – except for wire and leaf weights –
are laser-engraved with an individual three-character
alphanumeric marking in accordance with the OIML
R111-1 International Recommendation. Therefore,
Sartorius weights are 100% traceable throughout their
entire life cycles. The weights made of cast iron have
a unique marking stamped on the cover plate.
 Reference Line Weights Weights and Weight Sets 63

Reference Line Weights

Sartorius Reference Line weights are OIML class F1 and F2 weights with nominal
the first choice for primary mass standards. values of 1 g and higher are available as
They are supplied with a first-class knob weights and made of special stainless
finish featuring a high gloss polish and steel that has a density of 7,950 kg/m3.
corrosion-­­resistant surfaces. The quality Their tolerances likewise comply with OIML
of these weights exceeds the requirements R111-1. The weights are non-magnetizable
of the OIML R111-1 International recom- and, up to 20 g, come in a plastic case.
mendation. Sartorius Reference Line Starting at 50 g, they are supplied in a
weights have only positive deviations from high-quality wooden case**.
the nominal value*.

Description * Valid at the time of delivery and without taking

into account the measurement uncertainty
OIML class E1 and E2 weights from 1 mg
** Unless otherwise specified
to 500 mg are available as wire weights;
those with a nominal mass of 1 g and
higher are designed as knob weights. They
are manufactured from special stainless
steel that has a density of 8,000 kg/m3 and
comply with OIML R111-1 tolerances.
The weights are non-magnetizable and are
delivered in a high-quality wooden case**.

Sartorius Reference Line milligram

weights of OIML class F1 are designed as
wire weights. These weights are made
of stainless steel that has a density of
7,950 kg/m3. The tolerances comply with
OIML R111-1.
64 Weights and Weight Sets Reference Line Weights

Ordering Information
OIML Class E1 | E2
Without DAkkS With DAkkS
calibration certificate calibration certificate
Nominal Value OIML Class E1 OIML Class E2 OIML Class E1 OIML Class E2

1 mg YCW0111-00 YCW0121-00 YCW0111-02 YCW0121-02

2 mg YCW0211-00 YCW0221-00 YCW0211-02 YCW0221-02
5 mg YCW0511-00 YCW0521-00 YCW0511-02 YCW0521-02
10 mg YCW1111-00 YCW1221-00 YCW1111-02 YCW1121-02
20 mg YCW1211-00 YCW1121-00 YCW1211-02 YCW1221-02
50 mg YCW1511-00 YCW1521-00 YCW1511-02 YCW1521-02
100 mg YCW2111-00 YCW2121-00 YCW2111-02 YCW2121-02
200 mg YCW2211-00 YCW2221-00 YCW2211-02 YCW2221-02
500 mg YCW2511-00 YCW2521-00 YCW2511-02 YCW2521-02

1g YCW311-00 YCW312-00 YCW311-02 YCW312-02

2g YCW321-00 YCW322-00 YCW321-02 YCW322-02
5g YCW351-00 YCW352-00 YCW351-02 YCW352-02
10 g YCW411-00 YCW412-00 YCW411-02 YCW412-02
20 g YCW421-00 YCW422-00 YCW421-02 YCW422-02
50 g YCW451-00 YCW452-00 YCW451-02 YCW452-02
100 g YCW511-00 YCW512-00 YCW511-02 YCW512-02
200 g YCW521-00 YCW522-00 YCW521-02 YCW522-02
500 g YCW551-00 YCW552-00 YCW551-02 YCW552-02

1 kg YCW611-00 YCW612-00 YCW611-02 YCW612-02

2 kg YCW621-00 YCW622-00 YCW621-02 YCW622-02
5 kg YCW651-00 YCW652-00 YCW651-02 YCW652-02
10 kg YCW711-00 YCW712-00 YCW711-02 YCW712-02
20 kg YCW721-00 YCW722-00 YCW721-02 YCW722-02
50 kg YCW751-00 YCW752-00 YCW751-02 YCW752-02
 Reference Line Weights Weights and Weight Sets 65

OIML Class F1 | F2

Without DAkkS With DAkkS
calibration certificate calibration certificate
Nominal Value OIML Class F1 OIML Class F2 OIML Class F1 OIML Class F2

1 mg YCW0131-00 – YCW0131-02 –
2 mg YCW0231-00 – YCW0231-02 –
5 mg YCW0531-00 – YCW0531-02 –
10 mg YCW1131-00 – YCW1131-02 –
20 mg YCW1231-00 – YCW1231-02 –
50 mg YCW1531-00 – YCW1531-02 –
100 mg YCW2131-00 – YCW2131-02 –
200 mg YCW2231-00 – YCW2231-02 –
500 mg YCW2531-00 – YCW2531-02 –

1g YCW313-00 YCW314-00 YCW313-02 YCW314-02

2g YCW323-00 YCW324-00 YCW323-02 YCW324-02
5g YCW353-00 YCW354-00 YCW353-02 YCW354-02
10 g YCW413-00 YCW414-00 YCW413-02 YCW414-02
20 g YCW423-00 YCW424-00 YCW423-02 YCW424-02
50 g YCW453-00 YCW454-00 YCW453-02 YCW454-02
100 g YCW513-00 YCW514-00 YCW513-02 YCW514-02
200 g YCW523-00 YCW524-00 YCW523-02 YCW524-02
500 g YCW553-00 YCW554-00 YCW553-02 YCW554-02

1 kg YCW613-00 YCW614-00 YCW613-02 YCW614-02

2 kg YCW623-00 YCW624-00 YCW623-02 YCW624-02
5 kg YCW653-00 YCW654-00 YCW653-02 YCW654-02
10 kg YCW713-00 YCW714-00 YCW713-02 YCW714-02
20 kg YCW723-00 YCW724-00 YCW723-02 YCW724-02
50 kg YCW753-00 YCW754-00 YCW753-02 YCW754-02
66 Weights and Weight Sets Reference Line Weight Sets

Reference Line Weight Sets

The weights of the Sartorius Reference Line Reference Line sets with leaf weights
sets* have the same features and properties from 1 mg to 5 mg are made of aluminum
as the individual weights of this series, that has a density of 2,650 kg/m3; those
along with the corresponding maximum with weights from 10 mg to 500 mg are
permissible errors. These weight sets are made of nickel silver with a density of
supplied with gloves, tweezers and a brush 8,600 kg/m3. Their tolerances comply with
in a high-quality wooden case. OIML R111-1.

Description
OIML class E1 and E2 weights in the
­Reference Line sets are made of special
stainless steel that has a density of
8,000 kg/m3, and their tolerances comply
with OIML R111-1. Reference Line sets
with nominal mass values up to 500 mg
feature a wire weight shape.

OIML class F1 and F2 weights of the

­Reference Line sets are made ​​of special
stainless steel that has a density of
7,950 kg/m3. Their tolerances comply with
OIML R111-1.

OIML class F1 Reference Line weight sets

contain wire weights with nominal values
of up to 500 mg; those of OIML class F2
have leaf weights instead and nominal
values of up to 500 mg.
 Reference Line Weight Sets Weights and Weight Sets 67

Ordering Information
OIML Class E1 | E2
Without DAkkS With DAkkS
calibration certificate calibration certificate
Nominal Value OIML Class E1 OIML Class E2 OIML Class E1 OIML Class E2

1 mg to 5 g YCS011-351-00 YCS011-352-00 YCS011-351-02 YCS011-352-02

1 mg to 100 g YCS011-511-00 YCS011-512-00 YCS011-511-02 YCS011-512-02
1 mg to 200 g YCS011-521-00 YCS011-522-00 YCS011-521-02 YCS011-522-02
1 mg to 1 kg YCS011-611-00 YCS011-612-00 YCS011-611-02 YCS011-612-02
1 mg to 5 kg YCS011-651-00 YCS011-652-00 YCS011-651-02 YCS011-652-02

1 g to 1 kg YCS31-611-00 YCS31-612-00 YCS31-611-02 YCS31-612-02

1 g to 5 kg YCS31-651-00 YCS31-652-00 YCS31-651-02 YCS31-652-02
1 g to 10 kg YCS31-711-00 YCS31-712-00 YCS31-711-02 YCS31-712-02

OIML Class F1 | F2

Without DAkkS With DAkkS
calibration certificate calibration certificate
Nominal Value OIML Class F1 OIML Class F2 OIML Class F1 OIML Class F2

1 mg to 100 g YCS01-513-00 YCS01-514-00 YCS01-513-02 YCS01-514-02

1 mg to 200 g YCS01-523-00 YCS01-524-00 YCS01-523-02 YCS01-524-02
1 mg to 1 kg YCS01-613-00 YCS01-614-00 YCS01-613-02 YCS01-614-02
1 mg to 5 kg YCS01-653-00 YCS01-654-00 YCS01-653-02 YCS01-654-02

1 g to 1 kg YCS31-613-00 YCS31-614-00 YCS31-613-02 YCS31-614-02

1 g to 5 kg YCS31-653-00 YCS31-654-00 YCS31-653-02 YCS31-654-02
1 g to 10 kg YCS31-713-00 YCS31-714-00 YCS31-713-02 YCS31-714-02

* For a list of individual weight combinations in each set, see page 78.
68 Weights and Weight Sets Proof Line Weights

Proof Line Weights

Sartorius Proof Line weights are high- Sartorius Proof Line knob weights of OIML
quality working standards for everyday use. classes F1 and F2 with nominal values of
These weights are made of high quality 1 g and higher are made of stainless steel
material with polished or precision-lathed that has a density of 7,950 kg/m3.
surfaces and comply in all respects with The tolerances of these knob weights
the requirements on shape, material and comply with OIML R111-1, and they are
markings specified by the OIML R111-1 supplied in high-quality plastic screw-top
International Recommendation. boxes. Knob weights from 10 g and up
feature an adjustment chamber.
Description
OIML class E2 milligram weights are Proof Line OIML class F1 leaf weights
designed as leaf weights. With a nominal ranging from 1 mg to 5 mg are made
mass ranging from 1 mg to 5 mg, these of aluminum that has a density of
weights are made of aluminum that has a 2,650 kg/m3; those with nominal values
density of 2,650 kg/m3; those with nominal from 10 mg to 500 mg are manufactured
values ranging from 10 mg to 500 mg are from nickel silver that has a density of
manufactured from nickel silver with 8,600 kg/m3. Their tolerances comply with
a density of 8,600 kg/m3. Their tolerances OIML R111-1.
comply with OIML R111-1.
Milligram weights of the Proof Line range
Weights with nominal values of 1 g and are delivered in a high-quality plastic case.
higher are available as knob weights These plastic cases are suitable for use in
and are made of a special stainless steel cleanrooms.
that has a density of 7,950 kg/m3.
Their tolerances comply with OIML R111-1.

Proof Line weights are non-magnetizable

and supplied in a high-quality plastic case*.
These plastic cases are suitable for use in
cleanrooms.

* Unless otherwise specified

Ordering Information
OIML Class E2
Without DAkkS With DAkkS
calibration certificate calibration certificate
Nominal Value OIML Class E2

1 mg YCW0121-AC-00 YCW0121-AC-02
2 mg YCW0221-AC-00 YCW0221-AC-02
5 mg YCW0521-AC-00 YCW0521-AC-02
10 mg YCW1121-AC-00 YCW1121-AC-02
20 mg YCW1221-AC-00 YCW1221-AC-02
50 mg YCW1521-AC-00 YCW1521-AC-02
100 mg YCW2121-AC-00 YCW2221-AC-02
200 mg YCW2221-AC-00 YCW2121-AC-02
500 mg YCW2521-AC-00 YCW2521-AC-02
 Proof Line Weights Weights and Weight Sets 69

Without DAkkS With DAkkS

calibration certificate calibration certificate
Nominal Value OIML Class E2

1g YCW312-AC-00 YCW312-AC-02
2g YCW322-AC-00 YCW322-AC-02
5g YCW352-AC-00 YCW352-AC-02
10 g YCW412-AC-00 YCW412-AC-02
20 g YCW422-AC-00 YCW422-AC-02
50 g YCW452-AC-00 YCW452-AC-02
100 g YCW512-AC-00 YCW512-AC-02
200 g YCW522-AC-00 YCW522-AC-02
500 g YCW552-AC-00 YCW552-AC-02

1 kg YCW612-AC-00 YCW612-AC-02
2 kg YCW622-AC-00 YCW622-AC-02
5 kg YCW652-AC-00 YCW652-AC-02
10 kg YCW712-AC-00 YCW712-AC-02

OIML Class F1 | F2

Without DAkkS With DAkkS
calibration certificate calibration certificate
Nominal OIML Class F1 OIML Class F2 OIML Class F1 OIML Class F2
Value

1 mg YCW013-00 – YCW013-02 –
2 mg YCW023-00 – YCW023-02 –
5 mg YCW053-00 – YCW053-02 –
10 mg YCW113-00 – YCW113-02 –
20 mg YCW123-00 – YCW123-02 –
50 mg YCW153-00 – YCW153-02 –
100 mg YCW213-00 – YCW213-02 –
200 mg YCW223-00 – YCW223-02 –
500 mg YCW253-00 – YCW253-02 –

1g YCW313-AC-00 YCW314-AC-00 YCW313-AC-02 YCW314-AC-02

2g YCW323-AC-00 YCW324-AC-00 YCW323-AC-02 YCW324-AC-02
5g YCW353-AC-00 YCW354-AC-00 YCW353-AC-02 YCW354-AC-02
10 g YCW413-AC-00 YCW414-AC-00 YCW413-AC-02 YCW414-AC-02
20 g YCW423-AC-00 YCW424-AC-00 YCW423-AC-02 YCW424-AC-02
50 g YCW453-AC-00 YCW454-AC-00 YCW453-AC-02 YCW454-AC-02
100 g YCW513-AC-00 YCW514-AC-00 YCW513-AC-02 YCW514-AC-02
200 g YCW523-AC-00 YCW524-AC-00 YCW523-AC-02 YCW524-AC-02
500 g YCW553-AC-00 YCW554-AC-00 YCW553-AC-02 YCW554-AC-02

1 kg YCW613-AC-00 YCW614-AC-00 YCW613-AC-02 YCW614-AC-02

2 kg YCW623-AC-00 YCW624-AC-00 YCW623-AC-02 YCW624-AC-02
5 kg YCW653-AC-00 YCW654-AC-00 YCW653-AC-02 YCW654-AC-02
10 kg YCW713-AC-00 YCW714-AC-00 YCW713-AC-02 YCW714-AC-02
70 Weights and Weight Sets Proof Line Weights

Description OIML M1 and M2 block weights and ton

Sartorius Proof Line knob weights of OIML weights of the Proof Line series are made ​​
class M1 are made ​​of stainless steel, of cast iron that is black lacquered and has
precision-lathed and have a density of a density of 7,200 kg/m3. Their tolerances
7,850 kg/m3. Their tolerances comply with comply with OIML R111-1.
OIML R111-1.
Proof Line OIML class M1 block weights
OIML class M2 knob weights of the are also available in a choice of stainless
­Sartorius Proof Line series are manufac- steel that has a density of 7,850 kg/m3.
tured from brass, precision-lathed Their tolerances comply with OIML R111-1.
and have a density of 8,400 kg/m3. Their
tolerances comply with OIML R111-1.

All Proof Line weights are supplied in

high-quality plastic screw-top boxes that
are suitable for use in cleanrooms. Knob
weights from 10 g and up feature an
adjustment chamber.

Ordering Information
OIML Class M1 | M2
Without DAkkS With DAkkS
calibration certificate calibration certificate
Nominal OIML Class M1 OIML Class M2 OIML Class M1 OIML Class M2
Value

1g YCW315-AC-00 YCW316-AC-00 YCW315-AC-02 YCW316-AC-02

2g YCW325-AC-00 YCW326-AC-00 YCW325-AC-02 YCW326-AC-02
5g YCW355-AC-00 YCW356-AC-00 YCW355-AC-02 YCW356-AC-02
10 g YCW415-AC-00 YCW416-AC-00 YCW415-AC-02 YCW416-AC-02
20 g YCW425-AC-00 YCW426-AC-00 YCW425-AC-02 YCW426-AC-02
50 g YCW455-AC-00 YCW456-AC-00 YCW455-AC-02 YCW456-AC-02
100 g YCW515-AC-00 YCW516-AC-00 YCW515-AC-02 YCW516-AC-02
200 g YCW525-AC-00 YCW526-AC-00 YCW525-AC-02 YCW526-AC-02
500 g YCW555-AC-00 YCW556-AC-00 YCW555-AC-02 YCW556-AC-02

1 kg YCW615-AC-00 YCW616-AC-00 YCW615-AC-02 YCW616-AC-02

2 kg YCW625-AC-00 YCW626-AC-00 YCW625-AC-02 YCW626-AC-02
5 kg YCW655-AC-00 YCW656-AC-00 YCW655-AC-02 YCW656-AC-02
10 kg YCW715-AC-00 YCW716-AC-00 YCW715-AC-02 YCW716-AC-02
 Proof Line Weights Weights and Weight Sets 71

OIML Class M1 | M2

Without DAkkS With DAkkS
calibration certificate calibration certificate
Nominal OIML Class M1 OIML Class M2 OIML Class M1 OIML Class M2
Value

Block weights, cast iron

5 kg YCW6559-AC-00 YCW6569-AC-00 YCW6559-AC-02 YCW6569-AC-02
10 kg YCW7159-AC-00 YCW7169-AC-00 YCW7159-AC-02 YCW7169-AC-02
20 kg YCW7259-AC-00 YCW7269-AC-00 YCW7259-AC-02 YCW7269-AC-02
50 kg YCW7559-AC-00 YCW7569-AC-00 YCW7559-AC-02 YCW7569-AC-02

Block weights, stainless steel

5 kg YCW6554-AC-00 – YCW6554-AC-02 –
10 kg YCW7154-AC-00 – YCW7154-AC-02 –
20 kg YCW7254-AC-00 – YCW7254-AC-02 –
50 kg YCW7554-AC-00 – YCW7554-AC-02 –

Block weights, cast iron

100 kg YCW8159-AC-00 – YCW8159-AC-02 –
200 kg YCW8259-AC-00 – YCW8259-AC-02 –
500 kg YCW8559-AC-00 – YCW8559-AC-02 –
1,000 kg YCW9159-AC-00 – YCW9159-AC-02 –

Ton weights, cast iron

100 kg YCW8157-AC-00 – YCW8157-AC-02 –
200 kg YCW8257-AC-00 – YCW8257-AC-02 –
500 kg YCW8557-AC-00 – YCW8557-AC-02 –
1,000 kg YCW9157-AC-00 – YCW9157-AC-02 –
72 Weights and Weight Sets Proof Line Weight Sets

Proof Line Weight Sets

The weights of the Sartorius Proof Line made of aluminum that has a density of
weight sets* have the same features and 2,650 kg/m3; weights with nominal values
properties as the individual weights of of 10 mg to 500 mg are made of nickel
this series, along with the corresponding silver that has a density of 8,600 kg/m3.
maximum permissible errors. Their tolerances comply with OIML R111-1.

Description
* For a list of individual weight combinations in
These weight sets are supplied with
each set, see page 78.
gloves, tweezers and a brush in a
high-quality plastic case.

All milligram weights are provided as

leaf weights. With nominal mass values
ranging from 1 mg to 5 mg, they are

Ordering Information
OIML Class E2 | F1 | F2 | M1
Without DAkkS calibration certificate
Nominal OIML Class E2 OIML Class F1 OIML Class F2 OIML Class M1
Value

1 mg to YCS011-252-AC-00 YCS01-253-AC-00 YCS01-254-AC-00 YCS01-255-AC-00

500 mg
1 mg to – – – YCS01-515-AC-00
100 g
1 mg to – – – YCS01-525-AC-00
200 g
1 mg to – – – YCS01-615-AC-00
1 kg
1 mg to – – – YCS01-655-AC-00
5 kg

1 g to YCS31-512-AC-00 YCS31-513-AC-00 YCS31-514-AC-00 –

100 g
1 g to YCS31-522-AC-00 – – –
200 g
1 g to YCS31-612-AC-00 YCS31-613-AC-00 YCS31-614-AC-00 YCS31-615-AC-00
1 kg
1 g to YCS31-652-AC-00 YCS31-653-AC-00 YCS31-654-AC-00 YCS31-655-AC-00
5 kg
1 g to – – – YCS31-715-AC-00
10 kg
 Proof Line Weight Sets Weights and Weight Sets 73

OIML Class E2 | F1 | F2 | M1

With DAkkS calibration certificate
Nominal OIML Class E2 OIML Class F1 OIML Class F2 OIML Class M1
Value

1 mg to YCS011-252-AC-02 YCS01-253-AC-02 YCS01-254-AC-02 YCS01-255-AC-02

500 mg
1 mg to – – – YCS01-515-AC-02
100 g
1 mg to – – – YCS01-525-AC-02
200 g
1 mg to – – – YCS01-615-AC-02
1 kg
1 mg to – – – YCS01-655-AC-02
5 kg

1 g to YCS31-512-AC-02 YCS31-513-AC-02 YCS31-514-AC-02 –

100 g
1 g to YCS31-522-AC-02 – – –
200 g
1 g to YCS31-612-AC-02 YCS31-613-AC-02 YCS31-614-AC-02 YCS31-615-AC-02
1 kg
1 g to YCS31-652-AC-02 YCS31-653-AC-02 YCS31-654-AC-02 YCS31-655-AC-02
5 kg
1 g to – – – YCS31-715-AC-02
10 kg
74 Weights and Weight Sets Special Weight Sets and Service Weight Sets

Special Weight Sets and Service Weight Sets

Description that has a density of 8,000 kg/m3. Their

All weights of the Sartorius service weight tolerances comply with OIML R111-1.
sets* have the same features and properties Density reference weights are non-magne-
as the individual weights of the ­Sartorius tizable and are supplied in a high-quality
Reference Line series, along with the wooden case with a calibration certificate,
­corresponding maximum permissible errors. which includes density determination data.
These service weight sets are supplied with
gloves, tweezers and a brush in a service
case. * For a list of individual weight combinations
in each set, see page 78.

The Sartorius density reference set*

consists of stackable disc weights. All
weights are made of special stainless steel

Ordering Information
Service Weight Sets
Without DAkkS With DAkkS
calibration certificate calibration certificate
OIML Class Nominal Value

E2 1 mg to 5 kg YSS0121-353-00 YSS0121-353-02
E2 100 g to 5 kg YSS5128-6528-00 YSS5128-6528-02
F1 1 g to 5 kg YSS3138-6538-00 YSS3138-6538-02

Density Reference Set Order No.

OIML Class Nominal Value

E1 1 g to 1 kg YCS31-612-09
 Cylindrical Weights Weights and Weight Sets 75

Cylindrical Weights

Description
Sartorius cylindrical weights of OIML
classes E2, F1 and F2 are made ​​of special
stainless steel that has a density of
7,950 kg/m3. Their tolerances comply
with OIML R111-1. These weights are non-
magnetizable and have a polished surface.
They are supplied in high-quality plastic
cases that are suitable for use in clean-
rooms.

Ordering Information
OIML Class E2 | F1 | F2 
Without DAkkS calibration certificate
Nominal Value OIML Class E2 OIML Class F1 OIML Class F2

1g YCW3128-00 YCW3138-00 –
2g YCW3228-00 YCW3238-00 –
5g YCW3528-00 YCW3538-00 –
10 g YCW4128-00 YCW4138-00 –
20 g YCW4228-00 YCW4238-00 –
50 g YCW4528-00 YCW4538-00 –
100 g YCW5128-00 YCW5138-00 YCW5148-00
200 g YCW5228-00 YCW5238-00 YCW5248-00
500 g YCW5528-00 YCW5538-00 YCW5548-00

1 kg YCW6128-00 YCW6138-00 YCW6148-00

2 kg YCW6228-00 YCW6238-00 YCW6248-00
5 kg YCW6528-00 YCW6538-00 YCW6548-00
10 kg – YCW7138-00 YCW7148-00

OIML Class E2 | F1 | F2

With DAkkS calibration certificate
Nominal Value OIML Class E2 OIML Class F1 OIML Class F2

1g YCW3128-02 YCW3138-02 –
2g YCW3228-02 YCW3238-02 –
5g YCW3528-02 YCW3538-02 –
10 g YCW4128-02 YCW4138-02 –
20 g YCW4228-02 YCW4238-02 –
50 g YCW4528-02 YCW4538-02 –
100 g YCW5128-02 YCW5138-02 YCW5148-02
200 g YCW5228-02 YCW5238-02 YCW5248-02
500 g YCW5528-02 YCW5538-02 YCW5548-02

1 kg YCW6128-02 YCW6138-02 YCW6148-02

2 kg YCW6228-02 YCW6238-02 YCW6248-02
5 kg YCW6528-02 YCW6538-02 YCW6548-02
10 kg – YCW7138-02 YCW7148-02
76 Weights and Weight Sets Accessories for Cleaning and Handling of Weights

Accessories for Cleaning and Handling of Weights

According to the OIML R111-1 Interna- For proper storage of weights, Sartorius
tional Recommendation, special care must provides glass bell jars and plastic screw-
be taken in handling weights. Sartorius top boxes in different sizes. Wooden
supplies a wide range of work-saving and plastic cases are available in a choice
accessories to enable you to meet such of designs on request.
special requirements.

Description
To ensure correct handling and cleaning
of weights, Sartorius offers brushes, gloves
and handling tools in various designs
and sizes.

Ordering Information
Accessories Order No.
Brush Small, 100 mm YAW11
Medium, 115 mm YAW12
Large, 150 mm YAW13
Extra large, 250 mm YAW14

Gloves Cotton YAW21

Leather YAW22

Forceps with silicone-coated tips 115 mm for 1 mg to 5 g YAW31

160 mm for 1 g to 200 g YAW32
230 mm for 1 g to 1 kg YAW33

Tweezers with carbon tips 105 mm for 1 mg to 50 g YAW35

115 mm for 1 mg to 5 g YAW36
160 mm for 1 g to 200 g YAW37
230 mm for 1 g to 1 kg YAW38

Weight forks For 500 g YAW41

For 1 kg YAW42
For 2 kg YAW43

Weight fork, Fo(u)rk brand For 500 g to 5 kg YAW70

Fork, complete incl. adapters
Fork For 1 kg and 5 kg YAW71
Adapter For 500 g YAW72
For 2 kg YAW73
 Accessories for Storage of Weights Weights and Weight Sets 77

Accessories for Storage of Weights

Ordering Information
Accessories Order No.
Handles for lifting weights For 5 kg YAW50
For 10 kg YAW51
For 20 kg YAW52
For 50 kg YAW53

Glass bell jar with support plate For 1 mg to 5 g YAW00

For 1 mg to 50 g (100 g or 200 g) YAW01
For 100 g to 1 kg (2 kg) YAW02
For 2 kg to 5 kg YAW03
For 10 kg YAW04
For 20 kg YAW05
For 50 kg YAW06

Plastic screw-top boxes with For 1 mg to 100 mg weights YAW01GL

closed-pore foam inlay are ­ For 200 mg to 500 mg weights YAW05GL
suitable for use in cleanrooms
For 1 g to 20 g weights* YAW20GL
For 50 g weights* YAW50GL
For 100 g weights* YAW100GL
For 200 g weights* YAW200GL
For 500 g weights* YAW500GL
For 1 kg weights* YAW1000GL
For 2 kg weights* YAW2000GL
For 5 kg weights* YAW5000GL
For 10 kg weights* YAW10000GL

* For knob weights only; for information on boxes for cylindrical weights, please contact Sartorius
(same price)
78 Weights and Weight Sets Accessories for Storage of Weights

Range Contents mg g kg Range Contents mg g kg

1 mg to 5 g 1 1 mg to 5 kg 1
Total 2 Total 2
contents: 5 contents: 5
11.11 g 10 11,111.11 g 10
16 units 20 28 units 20
50 50
100 100
200 200
500 500
1 mg to 100 g 1 1 g to 1 kg 1
Total 2 Total 2
contents: 5 contents: 5
211.11 g 10 2,110 g 10
21 units 20 13 units 20
50 50
100 100
200 200
500 500
1 mg to 200 g 1 1 g to 5 kg 1
Total 2 Total 2
contents: 5 contents: 5
611.11 g 10 11,110 g 10
23 units 20 16 units 20
50 50
100 100
200 200
500 500
1 mg to 1 kg 1 1 g to 10 kg 1
Total 2 Total 2
contents: 5 contents: 5
2,111.11 g 10 21,110 g 10
25 units 20 17 units 20
50 50
100 100
200 200
500 500

Weight without marking

Weight with marking

* 1 kg and up: gloves included

Accessories for Storage of Weights Weights and Weight Sets 79
 Introduction Services 81

Services
Table of Contents

82 Instrument Services
83 Installation and Qualification
84 Extended Warranty
85 Calibration and Certificates
86 Maintenance
82 Services Instrument Services

Instrument Services

An expert in balances and weight Benefits

measurements backed by experience – Confident operation and reliable,
accumulated since 1870, Sartorius offers accurate results as well as long
a complete range of professional services instrument lifetime ensured by regular
from expert equipment installations to maintenance and the use of original
IQ | OQ qualification, to calibration and spare parts
maintenance for all makes and models – High-quality results that are always
of laboratory balances. accurate and traceable thanks to
professional on-site and on-time
The Sartorius network of ISO 17025 installation, maintenance and calibration
accredited organizations for calibration in compliance with ISO 17025, GLP | GMP
of weighing instruments spans the globe, and FDA regulations, as required
providing convenient, premium services – Fast and efficient workflows with
in compliance with international standards instruments that work correctly as well
and manufacturers‘ requirements. as custom-tailored training seminars
for users
Service Provided – Easy and complete management and
– Installation of balances as well as their control of documents to meet the needs
installation and operational qualification of quality systems and regulatory
(IQ | OQ) requirements
– Extended Warranty – Affordable, scheduled in-warranty
– Service contracts for preventive servicing of your equipment
maintenance and calibration services
for all brands of balances
– Calibration of balances according to
ISO 17025 inside your lab or at the site
of your choice
– Determination and certification of the
minimum sample weight acc. to USP 41
– Repair services and spare parts for
balances
 Installation and Qualification Services 83

Installation and Qualification

The reliability and the service life of Once our engineers have set up, installed
your equipment significantly depend on its and commissioned your equipment,
installation and configuration according they will train you and your staff in the
to the specifications. correct operation and care of your new
instruments, enabling you to work more
Installation and commissioning by our efficiently and confidently.
service professionals will ensure that your
system successfully operates right from
the start. Benefits
– We will ensure that the equipment
Description we install will operate in compliance
The Sartorius Services unit will work with cGMPs
side by side with you to find the best, – Your staff will receive all necessary
innovative solutions that perfectly meet training and will be instructed on how
your specific requirements on product to operate our equipment to obtain
quality, productivity and efficiency. optimal results
– You will receive comprehensive and
Regardless of whether or not you operate product-specific documentation at
your equipment in a GMP-regulated the time of installation
environment, by having it professionally
installed, commissioned and documented,
you can be sure that it will be up and
running perfectly right from the start.
Our Sartorius service team will install and
configure your equipment according to
your specifications and adapt it to the
prevailing on-site ambient conditions, plus
offer fully compliant IQ | OQ, whenever
needed.
84 Services Extended Warranty

Extended Warranty

Description
Opting for a Sartorius extended warranty
contract provides additional 12-month
coverage for your instruments, as well as a
comprehensive equipment “health check.”
This means no added cost for any potential
repairs and no surprises in your budget,
letting you cap the cost of ownership.

Service Provided
– Original spare parts
– Health check at the beginning of the
extended warranty period
– Detailed reports on all repair work
– In-warranty repairs as well as 12-month
extended warranty contracts

Benefits
– Using original spare parts helps
maximize the performance lifetime
of your instruments
– Fast response times with constant
availability of all commonly used parts
– Our extended warranty guarantees
that agreed repair rates will remain the
same throughout the contract period
 Calibration and Certificates Services 85

Calibration and Certificates

Description – Accreditation gives security in

At Sartorius, we recognize that supplying every audit
world-leading equipment is only half the – Accreditation helps to underpin the
story. This is why we go all the way in credibility and performance of your
providing world-class services to maximize goods and services
the performance of your equipment. – Accreditation removes barriers to
global trade (“Tested once, accepted
Sartorius Services will issue all calibration everywhere”)
and test certificates required. – In many cases, suppliers and regulatory
authorities will only accept test or
Benefits calibration results from a lab that is
– Fast response time accredited
– Re-integration of equipment into lab
and process sequences
– Complete documentation

Why choose an accredited calibration

certificate?
The confidence in calibration certificates,
depends substantially on the competence
of the service provider. With accreditation,
the service provider demonstrates its
­competence, impartiality and capability to
an independent accreditation body and
shows that their conformity assessments
are technically sound because they meet
the statutory and normative requirements
at an internationally comparable level.

The demands on the quality of goods

and services is growing steadily in light
of the liberalization of world trade and
the increasing demands of consumers,
companies and governmental authorities.
Whether it concerns environmental
protection, food industry or public health,
objective verifications by laboratories, as
well as inspection and certification bodies,
play an important role.
86 Services Maintenance

Maintenance

The objective of service agreements is a Service Provided

continuous, precise operation of your – We will provide a dedicated service
equipment, to secure your investments for engineer who is familiar with your
the long term and to guarantee correct specific equipment
configuration, calibration and adjustment. – Our service team will take care of
product-specific documentation and
Preventive maintenance will be performed issuing calibration and test certificates
in accordance with Sartorius’ fixed – We will proactively replace critical com-
standards and in between the contractually ponents before they become troublesome
stipulated time intervals between the – Our service engineers receive compre-
customer and Sartorius. hensive, documented training to keep
their qualifications up-to-date
Description
Total customer satisfaction can be
guaranteed only if outstanding products Benefits
are covered by extraordinary service – Consistently excellent equipment
support that enhances their value. performance
– No unnecessary, costly downtime
Regular preventive maintenance not – Complete documentation
only increases the lifetime of your –Extended equipment lifetime
equipment and ensures that it is correctly
set, calibrated and adjusted at all times,
but also prevents unnecessary, costly
downtime.
Maintenance Services 87
 Introduction Pipette Calibration 89

Intro

Pipette Calibration
Table of Contents

91 SpeedCal Multi-Channel Pipette

Calibration Balance
90 Pipette Calibration Introduction

Sartorius offers a 12-channel pipette calibration balance

for easy and fast calibration of your multi-channel
­pipettes. This innovative solution includes 12 balances
in one system. This way, you can perform a
10.3 calibration on your multi-channel pipettes within
less than 10 minutes – instead of 3 hours with
a single-channel balance.
 SpeedCal Pipette Calibration 91

SpeedCal Multi-Channel Pipette Calibration Balance

SpeedCal Advantages at a Glance The integrated evaporation trap ensures

Testing is carried out gravimetrically stable humidity inside weighing vessels.
according to EN ISO 8655/6.
Used with the calibration software
SpeedCal consists of 12 weigh cells provided, the laptop generates an EN ISO
and calibration software installed on 8655-compliant report.
a computer for testing all 12 channels
simultaneously. SpeedCal is supplied with a 12-channel
aspiration device. In addition, SpeedCal is
SpeedCal is designed to test multi-channel conveniently ­supplied with a standard
pipettes with a nominal volume ranging laptop.
from 10 μl to 1.2 ml.
Premium service is ensured by Sartorius.
SpeedCal needs only about three minutes
total to test a 12-channel pipette (= 360 Proprietary Technology
individual measurements including manual Utility model application registered in
pipetting). Germany. European patent already
granted.
Calibration measurements take place fully
automatically, except for pipetting.

Specifications and Ordering Information

Features
SSPC12K SpeedCal 12-channel balance for calibrating multi-channel pipettes; supplied
with a standard laptop, including 12-channel aspiration device
Length + width + height; weight Approx. 72 + 83 + 97 cm; 120 kg
Approx. 28" + 33" + 38"; 265 lb.
Operating voltage 100–240 V | 50 Hz or 60 Hz
Type of protection IP 54

Application
Multi-channel, piston-operated 10 µl – 1.2 ml
pipettes; nominal volume

Weigh Cells
Weigh cells, Sartorius type featuring WZA215-LC
electromagnetic force compensation
Number of weigh cells 12
Max. permissible error (k=1) < 0.02 mg (in the range of 0 –1.2 g | 0 –1,200 μl)
Resolution 0.01 mg
Tare range 12 g
Repeatability (i.e. standard deviation) < 0.02 mg
Response time (average) Approx. 5 s
Sensitivity to temperature drift Between +10°C and 30°C < ± 1 + 10-6 ppm/K
Warm-up time Approx. one hour after a cold start (it is recom-
mended to keep the unit in standby mode)
92 Pipette Calibration SpeedCal

Weighing Tubes Removable; can be disassembled by

Sartorius Service
Spacing and volume 9 mm; volume 12 ml
Tube drainage By aspiration device (no need to remove the tubes)

Compliance with Test Compliance with test requirements according

Requirements to EN ISO 8655/6
Testing speed Approx. 10 minutes for the complete 10.3 test

On-site Calibration Conditions

Horizontal, even surface and free of mechanical vibration; clean and free of dust;
sources of high electromagnetic interference fields must be avoided
Allowable ambient temperature Constant ±1°C between +10°C to +30°C

Shipping Data
Shipping weight Approx. 150 kg | Approx. 331 lb.
Shipping dimensions (L + W + H) Approx. 160 + 150 + 190 cm | Approx. 63" + 59" + 75"

Accessories
Excel/ASCII data transfer software YFSP-02
Pump for SpeedCal SSP12K YFSP-03
12-channel aspiration device

Data Acquisition
Standard laptop, monitor
Operating system: Windows 7

CE Marking
According to Council Directive 73/23/EEC
According to Council Directive 89/336/EEC
Optional: According to Council Directive 90/384/EEC

Warranty
12 months

Service
Installation, qualification, startup and instructions.
Please contact Sartorius Services for your personalized offer.
Did You know …
… that you can order more lab catalogs?
Get an overview of our high-quality laboratory instruments, high-grade
consumables and excellent services.
Our product portfolio focuses on laboratory instruments, such as lab balances,
pipettes and laboratory water purification systems. Moreover, we offer
the widest range of consumables like laboratory filters and pipette tips.

Products for
Microbiological Control Laboratory Weighing Products Sartorius Liquid
Laboratory Handling
Weighing Products
Products

Products for Laboratory Weighing Sartorius Liquid Handling

Microbiological Control Products Products
Publication No.: SL-1530-e Publication No.: WL-0007-e Publication No.: SUL0002-e
Order No.: 85034-538-81 Order No.: 98649-018-13 Order No.: 85032-542-25

Laboratory Water
Laboratory Filtration Products Purification Products

Laboratory Filtration Laboratory Water

Products Purification Products
Publication No.: SLU0006-e Publication No.: SL-0002-e
Order No.: 85032-543-83 Order No.: 85037-548-54

Download our lab catalogs from our website:

www.sartorius.com/lab-catalogs
Sales and Service Contacts
For further contacts, visit www.sartorius.com

Europe America
Germany Italy USA Hong Kong
Sartorius Lab Instruments Sartorius Italy S.r.l. Sartorius Corporation Sartorius Hong Kong Ltd.
GmbH & Co. KG Viale A. Casati, 4 5 Orville Drive, Suite 200 Unit 1012, Lu Plaza
Weender Landstrasse 94–108 20835 Muggiò (MB) Bohemia, NY 11716 2 Wing Yip Street
37075 Goettingen Kwun Tong
Phone +39.039.4659.1 Phone +1.631.254.4249 Kowloon, Hong Kong
Phone +49.551.308.0 Fax +39.039.4659.88 Toll-free +1.800.635.2906
Fax +49.551.308.3289 Fax +1.631.254.4253 Phone +852.2774.2678
Fax +852.2766.3526
Netherlands
France & Suisse Romande Sartorius Netherlands B.V. Argentina
Sartorius France Sartorius Argentina S.A. India
Phone +31.30.60.53.001
2, rue Antoine Laurent de Lavoisier Int. A. Ávalos 4251 Sartorius Weighing India Pvt. Ltd.
Fax +31.30.60.52.917
ZA de la Gaudrée B1605ECS Munro #69/2-69/3, NH 48, Jakkasandra,
91410 Dourdan [email protected] Buenos Aires Nelamangala Tq
562 123 Bangalore, India
Phone +33.1.70.62.50.00 Phone +54.11.4721.0505
Fax +33.1.64.59.76.39 Fax +54.11.4762.2333 Phone +91.80.4350.5250
Poland
Fax +91.80.4350.5253
Sartorius Poland sp.z o.o.
ul. Wrzesinska 70
Austria 62-025 Kostrzyn Brazil
Sartorius Austria GmbH Sartorius do Brasil Ltda Japan
Modecenterstrasse 22 Phone +48.61.6473830 Avenida Senador Vergueiro 2962 Sartorius Japan K.K.
1030 Vienna Fax +48.61.6473839 São Bernardo do Campo 4th Fl., Daiwa Shinagawa North Bldg.
CEP 09600-000 - SP- Brasil 8-11, Kita-Shinagawa 1-chome
Phone +43.1.7965760.0 Shinagawa-ku, Tokyo, 140-0001 Japan
Fax +43.1.7965760.24 Russian Federation Phone +55.11.4362.8900
Fax + 55.11.4362.8901 Phone +81.3.3740.5408
LLC “Sartorius ICR”and LLC “Biohit”
Fax +81.3.3740.5406
Uralskaya str. 4, Lit. B
Belgium 199155, Saint-Petersburg
Sartorius Belgium N.V. Canada
Leuvensesteenweg, 248/B Phone +7.812.327.5.327 Sartorius Canada Inc. Malaysia
1800 Vilvoorde Fax +7.812.327.5.323 2179 Dunwin Drive #4 Sartorius Malaysia Sdn. Bhd
Mississauga, ON L5L 1X2 Lot L3-E-3B, Enterprise 4
Phone +32.2.756.06.71 Technology Park Malaysia
Fax +32.2.253.45.95 Spain & Portugal Phone +1.905.569.7977 Bukit Jalil
Sartorius Spain, S.A. Toll-Free +1.800.668.4234 57000 Kuala Lumpur, Malaysia
Avda. de la Industria, 32 Fax +1.905.569.7021
Finland & Baltics Phone +60.3.8996.0622
Edificio PAYMA
Sartorius Biohit Liquid Handling Oy Fax +60.3.8996.0755
28108 Alcobendas (Madrid)
Laippatie 1 Mexico
00880 Helsinki Phone Spain +34.902.123.367 Sartorius de México S.A. de C.V.
Phone Portugal +351.800.855.800 Circuito Circunvalación Poniente Singapore
Phone +358.9.755.951 Fax Spain +34.91.358.96.23 Sartorius Singapore Pte. Ltd
No. 149
Fax +358.9.755.95.200 Fax Portugal +351.800.855.799 1 Science Park Road,
Ciudad Satélite
53100, Estado de México The Capricorn, #05-08A,
México Singapore Science Park II
Hungary Switzerland Singapore 117528
Sartorius Hungária Kft. Sartorius Mechatronics Switzerland AG Phone +52.5555.62.1102
Kagyló u. 5. Fax +52.5555.62.2942 Phone +65.6872.3966
Ringstrasse 24a
2092 Budakeszi Fax +65.6778.2494
8317 Tagelswangen (ZH)
Phone +3623.457.227 Phone +41.44.746.50.00
Fax +3623.457.147 Fax +41.44.746.50.50
Asia | Pacific South Korea

Specifications subject to change without notice. Printed in the EU on paper bleached without chlorine. | W
Sartorius Korea Ltd.
Ireland 8th Floor, Solid Space B/D,
Sartorius Ireland Ltd. U.K. Australia PanGyoYeok-Ro 220, BunDang-Gu
Unit 41, The Business Centre Sartorius UK Ltd. Sartorius Australia Pty. Ltd. SeongNam-Si, GyeongGi-Do, 463-400
Stadium Business Park Longmead Business Centre Unit 5, 7-11 Rodeo Drive
Dandenong South Vic 3175 Phone +82.31.622.5700
Ballycoolin Road Blenheim Road, Epsom
Fax +82.31.622.5799
Dublin 11 Surrey KT19 9QQ Phone +61.3.8762.1800
Phone +353.1.8089050 Phone +44.1372.737159 Fax +61.3.8762.1828
Fax +353.1.8089388 Fax +44.1372.726171 Thailand Publication No.: WL-0007-e150501 · Order No.: 98649-018-13 · Ver. 05 | 2015
Sartorius (Thailand) Co. Ltd.
China 129 Rama 9 Road,
Ukraine Sartorius Scientific Huaykwang
LLC “Biohit” Instruments (Beijing) Co., Ltd. Bangkok 10310
Post Box 440 “B” 33 Yu An Road, Airport Industrial Park
Zone B, Phone +66.2643.8361-6
01001 Kiev, Ukraine
Shunyi District, Beijing 101300, Fax +66.2643.8367
Phone +380.44.411.4918 P.R.China
Fax +380.50.623.3162
Phone +86.10.8042.6300
Fax +86.10.8042.6486

www.sartorius.com