480TB/G

EUROMOLD® Compact tee connector

for multiple voltage levels
Interface C
up to 42 kV, 630 A/1250 A1)

Application Technical characteristics U0 / U (Um )

Suitable for installation on • The thick conductive EPDM jacket 6/10 (12) kV
polymeric insulated medium provides a total safe to touch screen 6.35/11 (12) kV
voltage cables with extruded to ensure safety. 8.7/15 (17.5) kV
easy strip conductive screen or • Metal housing available on request.
12/20 (24) kV
bonded extruded conductive • For use with test rod 800TR/800TR-A.
screen. For use with other cable • Each separable connector is tested
12.7/22 (24) kV
types please contact our sales for AC withstand and partial
18/30 (36) kV
representative. discharge prior to leaving the factory. 19/33 (36) kV
20.8/36 (42) kV

Design 185 mm
1. Conductive EPDM insert
2. Conductive EPDM jacket
3. Insulating EPDM layer
4. Type C1+C2 interface as Dia. 80
described by CENELEC
EN 50180 and 50181
5. Bolted or crimp conductor contact
6. Basic insulating plug 4 9
(with voltage detection point,
standard from 30 kV) 8
5
7. Cable reducer
8. Conductive rubber cap 1 6
9. Clamping screw 430 TCS
(optional M16 stud with spring 290 mm 2
washer and nut) Dia. 652)
10. Earth lead 3

The screen break design enables

cable outer sheath testing without 10
removing or dismantling the
connector.

7
Specifications and
standards
The 480TB/G separable connector
meets the requirements of 2)
The indicated diameter is a die dimension. Depending on the conductor
CENELEC HD 629.1. ATEX version cross-section used, a deviation of up to +5 mm is possible.
can be delivered on request.

Separable connector Nominal voltage Current Conductor cross-section (mm2)

type U0 /U (kV) In (A) min. max.
480TB/G 6/10 630/12501) 25 300
15-01-2019

K480TB/G 12/20 630/12501) 35 300

M480TB/G 18/30 630/12501) 50 300
P480TB/G 20.8/36 630/12501) 50 240
1)
When installed on appropriate equipment bushing.

18
 The kit also comprises:
Kit contents + installation instructions
The complete (K)(M)(P)480TB/G tee connector + silicone grease
kit comprises 3 x the following components: + wipers
+ screen wire cable lugs
Standard delivery
= range
Clamping
Conductor contact
screw
TMBC For application
430TCS
+ + + + with a compression
conductor connec-
tor, the cable data,
including the shape,
Basic insulating = cross-section and
M16 stud plug Connector housing Cable reducer Conductor contact material of the
with spring + rubber cap (K)(M)(P)480BT/G 430CA TBC conductor, must
washer and (K)800BIPR/ be indicated when
nut (M)(P)800BIPA ordering.

Ordering instructions Multirange assignment

Indicate the part number for Cross- Dia. over core
Ordering part number for (K)(M)(P)480TB/G
multirange application when section insulation (mm)
with mechanical connector TMBC
ordering (see table). (mm2)
min. max. with clamping screw 430TCS / with M16 stud
Nominal voltage U0 /U 6/10 kV
Order example:
25 13.0 15.2
1 compact tee connector kit 35 14.1 16.3
501125/
for 12/20 kV, for 95-300 mm² 501126
50 15.3 17.5
with mechanical conductor 70 17.0 19.2
95 17.9 20.8 501127/
connector and clamping screw 120 19.4 22.8 501128
430 TCS. Order according to the 150 20.9 24.3
table: 1 kit – K480TB/G with 185 22.5 25.9
501129/
240 25.0 28.4
part number 501133. 300 27.7 30.4 501130
Nominal voltage U0 /U 12/20 kV (K)
Note: The classification does 35 18.3 20.5
only apply for polymeric insulated 501131/
50 19.5 21.7
501132
XLPE cables (dimensions acc. 70 21.2 23.4
95 22.8 25.0
to DIN VDE 0276 620) with 120 23.6 27.0
extruded conductive screen and 150 25.1 28.5 501133/
stranded conductors. 185 26.7 30.1 501134
3) 240 29.2 32.6 501135/
Since the dimensions for 300 31.2 34.6 501136
cables at voltage level 20.8/36 Nominal voltage U0 /U 18/30 kV (M)
(42) kV are not yet standardised,
50 23.8 26.7
the conductor cross-sections and 70 25.5 28.4 501137/
their assignment of diameters 95 27.1 30.0 501138
over core insulation given in 120 28.6 32.0
150 30.1 33.5
the table are to be considered 185 31.7 35.1 501139/
approximate values. When 240 34.2 37.6 501140 501141/
ordering accessories, we would 300 36.9 39.6 501142
like to ask you to indicate the Nominal voltage U0 /U 20.8/36 kV3) (P)
checked diameters over core 50 23.8 26.7
70 25.5 28.4 501143/
insulation. 501144
95 27.1 30.0
120 28.6 32.0
150 30.1 33.5
185 31.7 35.1 501145/
240 34.2 37.6 501146

For use with For use with For outdoor If an ATEX certification for All accessories available When installed on
15-01-2019

copper tape other cable types applications. connectors up to 12 kV is with mechanical or appropriate equipment
screened cables. please contact our required, contact our sales repre- compression conductor bushing: 1250 A
Order: Kit MT. representative. sentative before ordering. connector. continuously.

Nexans Power Accessories Germany GmbH • Ferdinand-Porsche-Str. 12 • 95028 Hof/Saale • Phone: +49 9281 8306-0
[email protected] • www.nexans-power-accessories.com

19