Scribd
Upload
5 views

Techdata Aph 26482s1

Uploaded by

Efra Fonseca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views

Techdata Aph 26482s1

Uploaded by

Efra Fonseca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Amphenol ® Miniature Cylindrical Connectors

Proprietary/MIL-DTL-26482, Series 1

Amphenol® Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These
miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost
con­siderations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified to
MIL-DTL-26482, Series 1, and in addition there are several proprietary styles.
Common features of all styles:
• All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.
• Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.
• Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an
indefinite shelf life.
• All have resilient inserts which provide high dielectric strength and moisture barrier.
• A variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles.

Bayonet Coupling with Solder Contact Termination

PT, MS/PT (solder) Options


• MS and proprietary versions • 7 shell styles with 60 insert patterns
• Factory installed solder contacts • Hermetic seal (glass fusion)
• 3 point bayonet coupling and 5 key/keyway mating. recepta­cle styles available
PT Solder
• Intermateable with all miniature series connectors. • Pressurized thru bulkhead
jam nut receptacle and
• MS/PT meets MIL-DTL-26482 Series 1, service classes E, F and P. recepta­cle style available
mated straight plug
• MS/PT is UL recognized. • Pre-installed coax solder contacts
are available
SP (solder) • Printed circuit board contacts
• SP Series is a modification of the PT with same features except a are available
wider flange for back panel mounting

Bayonet Coupling with Crimp Contact Termination

PT Solder
PT-SE, MS/PT-SE (crimp) Options
wall mount receptacle
• MS and proprietary versions • 6 shell styles with 47 insert patterns
• Crimp rear insertable/front release contact termination. (closed entry • Coax and thermocouple contacts
socket insert prevents probe damage). are available
• 3 point bayonet coupling and 5 key/keyway mating.
• Intermateable with all miniature series connectors.
• MS/PT-SE meets MIL-DTL-26482 Series 1, service classes E, F, P.

SP-SE (crimp)
• Modification of the PT-SE with wider flange for back panel mounting
PT-SE Crimp
wall mount receptacle
and mated straight plug

You might also like