Scribd
Upload
168 views9 pages

Eltek Solar PVC Communication Guide

This document provides instructions for configuring Orion software for communication with Eltek solar PVCs. It outlines the required Orion software versions, how to activate automatic acknowledgment of new PVCs, how to change the PVC type to Eltek, and how to connect the Eltek communication cable and SPD alarm for Orion Touch and Orion B1 systems.

Uploaded by

Godwin Kyeremeh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
168 views9 pages

Eltek Solar PVC Communication Guide

This document provides instructions for configuring Orion software for communication with Eltek solar PVCs. It outlines the required Orion software versions, how to activate automatic acknowledgment of new PVCs, how to change the PVC type to Eltek, and how to connect the Eltek communication cable and SPD alarm for Orion Touch and Orion B1 systems.

Uploaded by

Godwin Kyeremeh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Eltek Solar PVC

Communication Guide

ATC GH Power Department


Prepared and reviewed by:
Fred A. Darko
Abdul Armah
Emmanuel Quarshie

PROPERTY OF ATC GHANA. STRICTLY NOT FOR SALE.


ELTEK PVC

PROPERTY OF ATC GHANA. STRICTLY NOT FOR SALE. 2


REQUIRED ORION SOFTWARE VERSIONS

Orion Touch
ORION SW V9.01B01

Orion B1
ORION SW V7.91B02

PROPERTY OF ATC GHANA. STRICTLY NOT FOR SALE. 3


ACTIVATE “ACKNOWLEDGE NEW PVCs AUTOMATICALLY”

Click on

Configuration

PVC

Setup

Make sure you tick the box


next to “Acknowledge New
PVCs Automatically”

Select “Accept Changes”

PROPERTY OF ATC GHANA. STRICTLY NOT FOR SALE. 4


CHANGE PVC TYPE TO ELTEK

Click on

Configuration

PVC

Parameter

Change

PROPERTY OF ATC GHANA. STRICTLY NOT FOR SALE. 5


CHANGE PVC TYPE TO ELTEK
Select

FLATPACK2 48/3200 HE SOLAR


(IMBUS)

Accept Changes

Select all parameters as


seen

PROPERTY OF ATC GHANA. STRICTLY NOT FOR SALE. 6


ELTEK COMM CABLE CONNECTION

Orion Touch
Connect the Eltek Comm Cable to
the empty RS485 slot on the
second SSM card as indicated.

Orion B1
Connect the Eltek Comm Cable to
either one of ports on the Orion B1
backplane as indicated.

PROPERTY OF ATC GHANA. STRICTLY NOT FOR SALE. 7


ELTEK SPD ALARM CONNECTION
Failure to connect SPD Alarm will result in Eltek Comm Failure

Cable 1 – positive busbar

Cable 2 – negative busbar

Cable 3 – back plane DI as indicated below

PROPERTY OF ATC GHANA. STRICTLY NOT FOR SALE. 8


Thank You
9

You might also like