S221 NTLW

High power, vented Subwoofer

2 x 21NTLW5000
 S221 NTLW | SPEAKERS
21NTLW5000 8Ω
SPECIFICATIONS KEY FEATURES
Nominal Diameter 533 mm (21 in) • 96,5 dB SPL 1W/1m average sensitivity
Nominal Impedance 8Ω • Dual 115mm (4,5 in) Tetracoil Aluminum Voice coil
Minimum Impedance 6.8 Ω
• 4000 W program power handling
Nominal Power Handling1 1800 W • Ultra linear suspension behavior for excellent sound clarity
Continuous Power Handling2 4000 W • Symmetric flux density and inductance behaviour
Sensitivity3 97.0 dB • Low noise forced air cooling design
Frequency Range 30 - 1800 Hz • Water repellent cone and epoxy coated plates
Voice Coil Diameter 115 mm (4.5 in) • Suitable for vented, horn loaded and bandpass applications

DESIGN
Magnet Material Neo
PARAMETERS4 Recommended Enclosure 200.0 dm3 (7.06 ft3)
Resonance Frequency 31 Hz Recommended Tuning 33 Hz
Re 5.3 Ω
Qes 0.38 MOUNTING AND SHIPPING INFO
Qms 5.2
Overall Diameter 545 mm (21.46 in)
Qts 0.36
Bolt Circle Diameter 520 mm (20.47 in)
Vas 270.0 dm3 (9.53 ft3)
Sd 1662.0 cm2 (257.61 in2) Baffle Cutout Diameter 492.0 mm (19.37 in)
Depth 320 mm (12.6 in)
Xmax 17.5 mm
Flange and Gasket Thickness 18 mm (0.71 in)
Mms 372.0 g
Net Weight 12.5 kg (27.56 lb)
Bl 32.0 Txm
Shipping Weight 13.5 kg (29.76 lb)
Le 1.6 mH
Shipping Box 570x570x350 mm
EBP 81 Hz
(22.44x22.44x13.78 in)

1. 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
2. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
4. Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
S221 NTLW | BILL OF MATERIALS

• 2x 21NTLW5000 – 8Ω
• 16x M8 Wood T-Nuts
• 16x M8 Hex socket head ISO 4762 with washer and grower washer
• 2x Neutrik NL4MPR
• Edilfiber damping material 30mm - 30kg/m3
S221 NTLW | FREQUENCY RESPONSE
IMPEDANCE RESPONSE
Half-Space Sensitivity 1w/1m
(dB) Level, Sound pressure Impedance, Amplitude + Phase (ohm)
120 60

115 54

110 48

+90°
105 42

100 36

95 0° 30

90 24

85 -90° 18

80 12

75 6

70 0
10 20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
 S221 NTLW | CEA2010B

(dB) Level, Sound pressure Half-Space Sensitivity 1w/1m

165

160 Weighted &

Tone Burst Center
Limited Maximum
Frequency (Hz)
155 SPL (dB)

150
20 119

145 25 135

32 138
140
40 136
135
50 138

130 63 144

80 144
125
100 144

120 125 144

160 144
115
20 30 40 50 60 70 80 90 100
Frequency (Hz)
 S221 NTLW | PROCESSING

Equalization curve Equalization curve with HPF & LPF

(dB) Level, Sound pressure
(dB) Level, Sound pressure 25
25

20
20

15
15

10
10
HPF:
5 Equalization points: 5
BTW 24dB/oct @ 24Hz
0
Pk: Frq: 26Hz – Q:3 – Gain: 2dB 0

Pk: Frq: 106Hz – Q:1.8 – Gain: -5.5dB LPF:

-5
-5
Pk: Frq: 150– Q:4 – Gain: -3.5dB LR 24dB/oct @ 70Hz
-10 Pk: Frq: 310Hz – Q:2 – Gain: -3.7dB -10

-15
-15

-20
-20

-25
-25 10 20 30 40 50 60 70 80 90 100 200 300 400 500
10 20 30 40 50 60 70 80 90 100 200 300 400 500 Frequency (Hz)
Frequency (Hz)

Subwoofer response (dB) Level, Sound pressure

Subwoofer response
(dB) Level, Sound pressure 120
120

115
115

110
110

105
105

100
100

95
95

90
90

85
85

80
80

75
75

70
70 10 20 30 40 50 60 70 80 90 100 200 300 400 500
10 20 30 40 50 60 70 80 90 100 200 300 400 500 Frequency (Hz)
Frequency (Hz)
 S221 NTLW
Assembly Information
S221 NTLW | DAMPING MATERIAL
Edilfiber (Polyester) 30kg/m3 – 30mm thick

Follow carefully the quantity and positioning

S221 NTLW | DAMPING MATERIAL
Edilfiber (Polyester) 30kg/m3 – 30mm thick

Follow carefully the quantity and positioning

S221 NTLW | DIMENSIONS
Total dimensions

Material: 15mm birch plywood

S221 NTLW | DIMENSIONS
Top View
S221 NTLW | DIMENSIONS
Top View
S221 NTLW | DIMENSIONS
Front View
S221 NTLW | DIMENSIONS
Back View
S221 NTLW | DIMENSIONS
Back Reinforcement
S221 NTLW | DIMENSIONS
Baffle
S221 NTLW | NOTES