P3 America, Inc.

Motion Control and Automation Products

Multi-Function Joystick Controller Series JH60C

Single, Dual, Triple or Quad Axis

Precision Hall Effect Potentiometers
Multiple Pushbutton Options
Dual Output Option for all Axis
High EMS / ESD Durability
5 Mio. Operations Mechanical Life

Third Axis
(see-saw potentiometer)

Momentary
Pushbuttons

Third / Fourth Axis

(see-saw potentiometer)

Trigger (Deadman) Switch

Note: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of
+15°C ~ +35°C. Specifications are subject to change without notice.

P3 America, Inc. Phone: 858-277-1420

3077B Clairemont Drive #363 Fax: 858-225-0439
San Diego, CA 92117 E-mail: [email protected]
USA Web: www.p3america.com June 2016
 P3 America, Inc. Motion Control and Automation Products

Multi-Axis Joystick Controller Series JH60C

X and Y Axes Mechanical Data (Note 1)

Mechanical Travel approx. ±20º from center (40º overall)
Operating Force Spring return w/guided feel; 3N ~ 4.5N (300 ~ 450gf)
Operating Temperature -20ºC ~ +60ºC
Vibration 10 ~ 55Hz 98m/s2 (10G)
Shock 30G
Life Expectancy > 5,000,000 random operations
Protection Grade IP40
Weight approx. 800g

Basic Dimensions

Abt. 20º Abt. 20º

Dimensions: mm

Abt. 63
55

Abt. 155

Abt. 200
Rubber boot

Abt. 56 Ø87
dress panel
Leadwire
labelling

Color coded, labelled lead wires

for all joystick functions. AW27,
3

about 300mm length

49

Mounting panel thickness within 4mm

Abt. 30

Abt. 300 Ø63

Note 1: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of
+15°C ~ +35°C. Specifications are subject to change without notice.

P3 America, Inc. Phone: 858-277-1420

3077B Clairemont Drive #363 Fax: 858-225-0439
San Diego, CA 92117 E-mail: [email protected]
USA Web: www.p3america.com June 2016
 P3 America, Inc.
Motion Control and Automation Products

Multi-Axis Joystick Controller Series JH60C

Specifications of X and Y Axis Hall Effect Potentiometer (Note 1)

Electrical Travel 40º (±20º from center)
Load Resistance over 10kΩ
Independent Linearity Tolerance ±3%
Resolution Infinite
Applied Voltage 5VDC ±10%
Effective Output 0.5V ~ 4.5V (redundant option)
EMS Durability 100V/m (80MHz~1GHz sine-wave 80% AM modulation)
Update rate
ESD Durability ±8KV contact ±15KV aerial discharge (IEC61000-4-2)
Dielectric Strength 1 minute at 500VAC
Insulation Resistance Over 1000M ohms at 500VDC

Output Characteristics

5V
4.5V ±0.15V OUT: Xa,Ya
(90% ±3%)   Xb,Yb (optional parallel output)

2.5V ±0.25V Output voltage

(50% ±5%)

0.5V ±0.15V OUT:Xb,Yb (optional cross output)

(10% ±3%)
0V
Center

Electrical rotating angle

abt. 40º (±20º)

Mechanical rotating angle

abt. 22.5º

Toward − direction Toward ＋ direction

Note 1: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of
+15°C ~ +35°C. Specifications are subject to change without notice.

P3 America, Inc. Phone: 858-277-1420

3077B Clairemont Drive #363 Fax: 858-225-0439
San Diego, CA 92117 E-mail: [email protected]
USA Web: www.p3america.com June 2016
 P3 America, Inc.
Motion Control and Automation Products

Multi-Axis Joystick Controller Series JH60C

Specifications of Z Axis (see-saw type) Hall Effect Potentiometer (Note 1)

Electrical Travel 30º (±15º from center)
Operating Force Spring return; 24mN • m ~ 30mN • m
Return to Center Accuracy 50% ±3%
Load Resistance over 10kΩ
Independent Linearity Tolerance ±3%
Resolution Infinite
Applied Voltage 5VDC ±10%
Update rate
Effective Output 0.5V ~ 4.5V (redundant option)
EMS Durability 100V/m (80MHz~1GHz sine-wave 80% AM modulation)
ESD Durability ±8KV contact ±15KV aerial discharge (IEC61000-4-2)
Dielectric Strength 1 minute at 500VAC
Insulation Resistance Over 1000M ohms at 500VDC

Z1 Axis
Output Characteristics − ＋

5V
4.5V ±0.15V OUT A
(90% ±3%)   B
OUT
(optional parallel output)

2.5V ±0.25V Output voltage

(50% ±5%)

0.5V ±0.15V OUT B

(10% ±3%) (optional cross output)
0V
Center

Electrical rotating angle ＋

abt. 30º (±15º)
−
Z2 Axis

Mechanical rotating angle

abt. 17º

Toward − direction Toward ＋ direction

Note 1: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of
+15°C ~ +35°C. Specifications are subject to change without notice.

P3 America, Inc. Phone: 858-277-1420

3077B Clairemont Drive #363 Fax: 858-225-0439
San Diego, CA 92117 E-mail: [email protected]
USA Web: www.p3america.com June 2016
 P3 America, Inc.
Motion Control and Automation Products

Multi-Axis Joystick Controller Series JH60C

Specifications of Pushbutton Switches (Note 1)

Model Number 59-111 (black) Manufactured by ITW Switches
Operating Characteristics Momentary type (SW-ON when pushed)
Rating 100mA, 50VDC
Dielectric Strength 1000VAC, 1 minute
Insulation Resistance > 1000MΩ at 500VDC
Mechanical Life Expectancy 500,000 operations max.

Circuit diagram and wiring connection diagram SW1 SW2

for push button switch
SW3

SW1 (Yellow) (Yellow)

SW2 (Gray) (Gray)

SW3 (White) (White)

Specifications of Trigger (Dead Man) Switch (Note 1)

Model Number SPVQ810100 Manufactured by ALPS
Operating Characteristics Momentary type (SW-ON when pushed)
Rating 100mA, 12VDC
Dielectric Strength 500VAC, 1 minute
Insulation Resistance > 100MΩ at 500VDC
Mechanical Life Expectancy 300,000 operations max.

Circuit diagram and wiring connection diagram

for dead man switch

SW7 (Red) (Red) SW7

Note 1: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of
+15°C ~ +35°C. Specifications are subject to change without notice.

P3 America, Inc. Phone: 858-277-1420

3077B Clairemont Drive #363 Fax: 858-225-0439
San Diego, CA 92117 E-mail: [email protected]
USA Web: www.p3america.com June 2016
 P3 America, Inc.
Motion Control and Automation Products

Multi-Axis Joystick Controller Series JH60C

X and Y Axis Lever Operating Pattern

Type Q Type U
Y Y Z

X X

Dual axis Triple axis

Omni directional (360°) X and Y axis, Omni directional (360°)
Z axis, rocker potentiometer

Handle Variations

w/dual axis w/three see-saw w/two see-saw w/two see-saw w/five colored
thumb control potentiometer potentiometer potentiometer pushbutton switches
hall effect single axis single axis single axis and trigger switch
controller controls controls, three controls, two
pushbuttons switches colored switches.
and trigger switch

Note 1: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of
+15°C ~ +35°C. Specifications are subject to change without notice.

P3 America, Inc. Phone: 858-277-1420

3077B Clairemont Drive #363 Fax: 858-225-0439
San Diego, CA 92117 E-mail: [email protected]
USA Web: www.p3america.com June 2016
 P3 America, Inc.
Motion Control and Automation Products

Multi-Function Joystick Controller - Hall Effect Potentiometer Series JH60C

Mounting Details

(4x) - M5 x 20 screws
Panel arrangements (Included) Mounting Plate (optional)
Dress panel

Thickness: 2mm
45º 0º
5hole 9
- ø5.
(4x)

Rubber boot

80 ±0.5
70 ±0.2
ø61
hole
Panel position
70 ±0.2
80 ±0.5

1. Remove 4 screws from dress panel.

Dimensions (mm) 2. Put joystick from below panel as shown
3. Assemble the dust proof rubber boot and
dress panel as shown with 4 supplied screws.

P3 America, Inc. Phone: 858-277-1420

3077B Clairemont Drive #363 Fax: 858-225-0439
San Diego, CA 92117 E-mail: [email protected]
USA Web: www.p3america.com December 2015