Digital Ground Resistance Tester

Models 4620 & 4630

Digital Ground Resistance Tester The Models 4620 and 4630 are 50/60Hz line, also provides for
Models 4620 and 4630 perform fuse protected up to >250Vac testing while recharging.
both ground resistance and soil against ­accidental connection to Both models will perform over 2000
resistivity tests. These testers live circuits. In the event of a - for the 15 second tests between
measure from 0 to 2000Ω, and are system fault, they can withstand recharging (Model 4630) or battery
auto- ­ranging, so they 250Vac with spikes of up to replacement (Model 4620).
automatically seek out the optimum 3000Vac or 1000Vdc.
measurement range. Easy-to-use: The Ground Resistance Tester
The heavy-duty field case is sealed Models 4620 and 4630 are rugged,
­simply connect the leads, press-to- against dust and water when
measure and read the results. easy-to-use ­instruments ideal for
closed. The meter itself is self-con- ­maintenance crews performing
The large LCDs (nearly 3/4" high tained within an inner case provid- ­numerous tests. Both models
­characters) are easy-to-read, and ing additional ­environmental and exceed mechanical and safety
also indicate low battery status, insulation protection. The test button specifications for shock, vibration
overrange, test lead shorts and is also sealed against the elements. and drop tests called out in IEC
lead reversals. Three LED indicators The Model 4620 is powered by standards. They are designed to
on the front panel ­continuously eight, alkaline C cell batteries. reject high levels of interference,
warn the user of measurement so they can be used under ­difficult
problems to ensure accurate and The Model 4630 is powered by a
9.6V, 3.5 Ah NiMH rechargeable conditions such as high stray
reliable tests. currents that ­normally affect
battery pack. A built-in recharge
circuit, powered from 120/230V accuracy.

Models 4620 & 4630 (pdf) 07/07 Rev 03

Technical Assistance (800) 343-1391 www.aemc.com

Features Applications
• M easures soil resistivity (4-Point) • T hree-Point measurements of • T
 wo-Point tests for continuity
method ­resistance to ground of ground tests
• Measures ground resistance (2- and rods and grids. Three-Point mea- on bonding or on pre-established
3-Point) Fall-of-Potential method surements are generally used when grounds. This test is commonly
• Step voltage tests and touch the ­electrode or grid can be easily ­performed in urban environments
­potential measurements ­disconnected, if corrosion is where proper auxiliary electrode
• Auto-Ranging: automatically selects ­suspected, or in ­circumstances where placement may be obscured by
the optimum resistance range ground faults are unlikely to occur. ­confined real estate. Measurements
• Four-Point tests or soil resistivity are referenced against a good local
• D  esigned to reject high levels of
measurements. Locating areas of grounded circuit.
noise and interference
• E  xtremely simple to operate: ­lowest soil resistivity is essential for
connect – press – read achieving an economical grounding
installation.
• LED on faceplate informs operator of
high input noise, high auxiliary rod • Touch potential measurements, an
resistance and fault connections alternative to 3-Point tests in
­evaluating electrical safety. This
• Large easy-to-read backlit display
test is recommended when the
• B  attery powered (Model 4620) ground ­cannot be disconnected,
• A  C powered with rechargeable where ground faults are highly likely
NiMH batteries (Model 4630) to occur, or when the “footprint” of
• Rugged dustproof and rainproof grounded equipment (the outline of
field case the part of equipment in contact with
• Can also be used for continuity the earth) is comparable to the size
tests on bonding of the ground to be tested.
• Color-coded terminals
• D  ouble Insulation
• CE Mark

Models 4620 & 4630 (pdf) 07/07 Rev 03

Technical Assistance (800) 343-1391 www.aemc.com

Specifications

Models 4620 4630

Electrical
Ranges (Auto-Ranging 0 to 2000Ω) 20Ω 200Ω 2000Ω
Measurement 0.00 to 19.99Ω 20.0 to 199.9Ω 200 to 1999Ω
Resolution 10mΩ 100mΩ 1Ω
Open Voltage ≤42V peak ≤42V peak ≤42V peak
Resistance Measurement 128Hz square wave 128Hz square wave 128Hz square wave
Frequency
Test Current 10mA 1mA 0.1mA
Accuracy ±2% of Reading ± 1ct ±2% of Reading ± 1ct ±2% of Reading ± 3cts
Auxiliary Electrode Influence
Max Res. in Current Circuit 3kΩ 30kΩ 50kΩ
Max Res. in Voltage Circuit 2000Ω 50kΩ 50kΩ
Interference Rejects high levels of interference voltage (DC, 50 to 60Hz, harmonics):
DC voltage in series with X: 20V; AC voltage in series with Y: 13V peak;
AC voltage in series with Z: 32V peak
Response Time Approximately 4 to 8 seconds for a stabilized measurement
Withstanding Voltage 250Vac or 100Vdc
Power Source Eight C cell batteries; 120/230V 50/60Hz
Alkaline recommended; Rechargeable 9.6V, 3.5 Ah NiMH battery pack
Battery Life 1800 15-second measurements; LO BAT indication on LCD
Fuse Protection 0.1A, >250V, 0.25 x 1.25"; 30kA Interrupt Capacity
MECHANICAL
Display 3 1/2 digit, 0.71" (18mm) high; 2000-counts; electroluminescent blue backlight
LCD also indicates ­overrange, test lead shorts and lead reversals
Connection Color-coded terminals accept spade lugs with min. gap of 6mm or
standard 4mm banana jacks
LED Indication Three LEDs indicate high input noise, high auxiliary rod resistance,
open leads, blown fuse
Operating Temperature 14° to 131°F (-10° to 55°C), 20 to 90% RH
Storage Temperature -40° to 158°F (-40° to 70°C), 10 to 90% RH with batteries removed
Dimensions 10.8 x 9.7 x 5.0" (273 x 247 x 127mm)
Weight 6.28 lbs (2.85kg) 7.38 lbs (3.35kg)
Case Heavy duty o-ring sealed field case
Mechanical Shock IEC 68-2-27
Vibration Test IEC 68-2-66
Drop Test IEC 68-2-32
Dielectric Test 3kV, 50/60Hz, 1 min. between four interconnected measuring terminals
and any external metal ground
Environmental O-ring sealed against dust and water to IP50 (Protection Index)
when case is closed
SAFETY
Rating EN 61010-1, Cat. III, Pollution Degree 2
Double Insulation Yes
CE Mark Yes

Models 4620 & 4630 (pdf) 07/07 Rev 03

Technical Assistance (800) 343-1391 www.aemc.com

Ground Kits

Test Kit for 3-Point testing includes instrument, two 150 ft

color-coded leads on spools (red and blue), one 30 ft lead
(green), two 14.5" T-shaped auxiliary ground electrodes, one
set of five spaded lugs, 100 ft tape measurer and ­carrying
bag.
Catalog #2135.19 (Model 4620)
Catalog #2135.22 (Model 4630)

Test Kit for 4-Point testing includes instrument, two 300 ft color-coded
leads on spools (red and blue), two 100 ft color-coded leads (green
and black), four 14.5" T-shaped auxiliary ground ­electrodes, one set
of five spaded lugs, 100 ft tape measurer
and carrying bag.
Catalog #2135.20 (Model 4620)
Catalog #2135.23 (Model 4630)

Test Kit for 4-Point testing includes instrument, two 500 ft color-coded
leads on spools (red and blue), two 100 ft color-coded leads (green
and black), one 30 ft lead (green), four 14.5" T-shaped auxiliary
ground electrodes, one set of five spaded lugs, 100 ft tape ­measurer
and ­carrying bag.
Catalog #2135.21 (Model 4620)
Catalog #2135.24 (Model 4630)

The Models 4620 and 4630 are built into a double

case. This extra rugged construction provides
­double ­insulation, ­maximum field durability and
ease of serviceability.

Models 4620 & 4630 (pdf) 07/07 Rev 03

Technical Assistance (800) 343-1391 www.aemc.com

Construction

Low battery indicator Large, electroluminescent

backlit liquid crystal display

AC power input

Z (H) Electrode
terminal Fuse
holder

Y (S) Electrode Test

terminal button

Xv (ES)
Electrode Xv-Y high
terminal ­resistance
and noise
­indicators

X (E) Electrode
terminal

ORDERING INFORMATION CATALOG NO.

Ground Resistance Tester Model 4620 (4-Point, Digital, Battery Powered). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2130.43
Includes meter, eight C cell batteries and user manual
Ground Resistance Tester Model 4630 (4-Point, Digital, Rechargeable Battery). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2130.44
Includes meter, battery, AC Power cord and user manual
Ground Resistance Tester Model 4620 Kit – 150 ft (Model 4620 and Catalog #2135.35) . . . . . . . . . . . . . . . . . . . Cat. #2135.19
Ground Resistance Tester Model 4620 Kit – 300 ft (Model 4620 and Catalog #2135.36) . . . . . . . . . . . . . . . . . . . Cat. #2135.20
Ground Resistance Tester Model 4620 Kit – 500 ft (Model 4620 and Catalog #2135.37) . . . . . . . . . . . . . . . . . . . Cat. #2135.21
Ground Resistance Tester Model 4630 Kit – 150 ft (Model 4630 and Catalog #2135.35) . . . . . . . . . . . . . . . . . . . Cat. #2135.22
Ground Resistance Tester Model 4630 Kit – 300 ft (Model 4630 and Catalog #2135.36) . . . . . . . . . . . . . . . . . . . Cat. #2135.23
Ground Resistance Tester Model Kit – 500 ft (Model 4630 and Catalog #2135.37). . . . . . . . . . . . . . . . . . . . . . . . Cat. #2135.24
Accessories (Optional)
25Ω Calibration Checker (for Model 4620 and Model 4630). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2130.59
Tape Measure (100 ft). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2130.60
Test Kit for 3-point testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2135.35
Test Kit for 4-point testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2135.36
Test Kit for 4-point testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2135.37
Test Kit for 3-point testing (supplimental 4-point testing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2135.38
Ground Rod - set of 2, 14.5" T Shaped Auxiliary Ground Electrodes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2135.39

Models 4620 & 4630 (pdf) 07/07 Rev 03

Technical Assistance (800) 343-1391 www.aemc.com

Contact Us
United States & Canada:

Chauvin Arnoux®, Inc.

d.b.a. AEMC ® Instruments
200 Foxborough Blvd.
Foxborough, MA 02035 USA
(508) 698-2115 • Fax (508) 698-2118
www.aemc.com

Customer Support – for placing an order, obtaining price & delivery:

[email protected]

Sales Department – for general sales information:

[email protected]

Repair and Calibration Service – for information on repair & calibration, obtaining a user manual:
[email protected]

Technical and Product Application Support – for technical and application support:
[email protected]

Webmaster – for information regarding www.aemc.com:

[email protected]

South America, Central America, Mexico, Caribbean, Australia & New Zealand:

Chauvin Arnoux®, Inc.

d.b.a. AEMC ® Instruments
15 Faraday Drive
Dover, NH 03820 USA
(978) 526-7667 • Fax (978) 526-7605
[email protected]
www.aemc.com

All other countries:

Chauvin Arnoux® SCA

190, rue Championnet
75876 Paris Cedex 18, France
33 1 44 85 45 28 • Fax 33 1 46 27 73 89
[email protected]
www.chauvin-arnoux.com

Models 4620 & 4630 (pdf) 07/07 Rev 03

Technical Assistance (800) 343-1391 www.aemc.com