Scribd
Upload
511 views6 pages

Power Electronics Lab Manual

This document provides specifications for 12 power electronics experiments that can be performed using a power electronics lab. The experiments include measuring characteristics of semiconductor devices like SCRs, TRIACs, and MOSFETs. Other experiments involve building and studying half wave and full wave rectifier circuits, inverters, converters, and an AC voltage controller. The front panel of the lab includes devices, power supplies, loads, meters and protections needed to perform the various experiments.

Uploaded by

sathyasony
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
511 views6 pages

Power Electronics Lab Manual

This document provides specifications for 12 power electronics experiments that can be performed using a power electronics lab. The experiments include measuring characteristics of semiconductor devices like SCRs, TRIACs, and MOSFETs. Other experiments involve building and studying half wave and full wave rectifier circuits, inverters, converters, and an AC voltage controller. The front panel of the lab includes devices, power supplies, loads, meters and protections needed to perform the various experiments.

Uploaded by

sathyasony
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Shree Balaji Electronics

POWER ELECTRONICS LAB


1.VI Characteristics of SCR, TRIAC & MOSFET 2.To measure the latching and holding current of a SCR Feature:SPECIFICATION FRONT PANEL DETAILS: 1. Power :: Mains ON/OFF switch with indicator 2. Devices :: 6A/600V SCR,TRIIAC & MOSFET 3. Power Supply :: 0-15V/250mA,, 0-35V/500mA 4.Load :: 2.5K OHMS/25W 5. Digital Meters :: 0-20mA/0-20V, 0-200V, 0-2 A 6. Protection :: Fuse, Heat sink EXPERIIMENT To draw static characteristics off SCR,, TRIIAC & MOSFET To measure the latching and holding current off a SCR

3.Study of the V-I characteristics of UJT

Features:SPECIFICATIONS/FRONT PANEL DETAILS: 1. Power :: Mains ON/OFF switch with indicator 2. Devices :: 8A/600V MOSFET,IIGBT 3.Power Supply :: 0-15V/250mA,0-35V/500mA 4. Load :: 2.5K OHMS/25W 5.Digital Meters:: 0-20V for VE,0-200V for VBB,, 0-200mA for IE 6.Protection :: Fuse, Heat sink EXPERIIMENT To draw static characteristics off UJT

4. (a) Study of the synchronized UJT triggering circuit.

SPECIFICATION/FRONT PANEL DETAILS 1. Power :: Mains ON/OFF switch with indicator 2.Devices :: 4A/400V SCR 3. Power Supply :: 0-12V/1A, AC 4. Load :: 100OHMS/10W 5.Circuit : Line synchronized UJT relaxation oscillator circuit 6. Protection :: Fuse , Heat sink EXPERIIMENT To construct SCR HWR//FWR using UJT Triggering

4. (b) Study of the cosine controlled triggering circuit


SPECIIFIICATIIONS FRONT PANEL DETAIILS 1. Power :: Mains ON/OFF switch with indicator 2.Devices :: 16A/1200V SCR 3. Power Supply :: 0--12V/1A,, AC 4. Load :: 100OHMS/10W 5. Circuit:: Line synchronized cosine Triggering circuit 6. Protection :: Fuse,, Heat sink EXPERIIMENT To construct SCR Rectifier using cosine Triggering

5. Study of the single phase half wave controlled rectifier and semi converter circuit with R and R-L Load

Isolation Transformer
1Ph half bridge firing unit

L Load

SPECIIFIICATIIONS//FRONT PANEL DETAIILS Power Circuit :: 5A//250V 1.Devices :: 25A/1200V SCRs 2No, Diode 3 No 2. Protection:: 6A MCB, 5A Fuses, Heat sink, Snubber ckts 3. Meters :: 5A Ammeter, 300V voltmeter Firing Circuit 1. Power :: Mains ON/OFF switch with indicator 2.Gate pulses :: Two isolated Gate pulses 3.Testing points :: Four testing points 4. Firing Angle :: 0--180 through potentiometer Input Source :: Through suitable isolation transformer Loads :: Works with Suitable R, RL, Motor loads

1Ph half bridge Power Ckts


Experiments Single phase half wave controlled rectifier and semi converter circuit with R and R--L Load

6. Study of single phase full wave controlled rectifier circuits (mid point and Bridge type) with R and R-L Load

1Ph Full bridge firing unit

1Ph Full bridge Power Ckts


SPECIIFIICATIIONS FRONT PANEL DETAIILS

Power Circuit :: 5A/250V 1. Devices :: 25A/1200V SCR 4Noss,Diode 1 No 2. Protection :: 6A MCB, 5A Fuses , Heat sink 3. Meters :: 5A Ammeter, 300V voltmeter

L Load

Isolation Transformer

Firing Circuit 1. Power :: Mains ON/OFF switch with indicator 2. Gate pulses :: Four isolated Gate pulses 3. Testing points :: Four testing points 4.Firing Angle :: 0--180 through potentiometer Input Source :: Through suitable isolation transformer Loads :: Works with Suitable R,RL, Motor loads Experiments Single phase fully wave controlled rectifier circuits (mid point and Bridge type) with R and R--L Load

7. Study of three phase full wave controlled rectifier circuits (Full and Semi converter) with R and R-L Load

3Ph half/fully controlled bridge firing unit

3Ph half/fully controlled bridge Power Circuit

L Load

Isolation transformer

SPECIFICATION FRONT PANEL DETAIILS Power Circuit :: 5A/430V 1. Devices : 25A/1200V Scars 6Noss, Diode 4 No 2. Protection:: 6A MCB, 5A Fuses, Heat sink, Snubber 3.Meters :: 5A Ammeter, 500V voltmeter Firing Circuit 1. Power :: Mains ON/OFF switch 2. Gate pulses :: Six isolated Gate pulses 3. Testing Points :: Eight testing points 4. Firing Angle :: 0--180 through potentiometer Input Source :: Through suitable isolation transformer Loads :: Works with Suitable R,, RL,, Motor loads Experiments Three phase full wave half/fully controlled rectifier circuits with R and R-L Load
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Plot No-1775, 3rd Lane, Chintamaniswar, Bhubaneswar-751006 Phone: 0674-2314422, 6451025.Mob-09861445071 E-mail:[email protected], [email protected], www.shreebalajiedu.com

8. Study of the forward converter (Buck converter) and fly back converter (boost converter) operation.
SPECIFICATION FRONT PANEL DETAIILS:: 1. Power :: Mains ON/OFF switch with indicator 2. Devices:: 16A/800V MOSFET--1Nos, 16A/1200V Diodes--2Nos 3. Inductor :: 100 mH 4. Capacitor :: 4..7 F 5. Protection :: Fuse,, Heat sink,, Snubber ckts 6.Frequency :: 25Hz--100Hz 7. Duty cycle :: 10% to 90%.. 8. Gate signals :: One isolated gate signals EXPERIIMENT To construct & to study forward converter and fly back converter

9. Study of the single phase PWM voltage source inverter.

1. 2. 3. 4. 5. 6. 7.

SPECIFICATION Devices :: 30A/1200V IGBT-4Nos, Diodes4Nos DC Supply :: 0--200V Variable DC power supply Gate pulses :: Four isolated Gate pulses Frequency :: 20 Hz to 50 Hz Modulation :: Sinusoidal modulation 0-100% index Display :: For modulation index & frequency Load :: Works with R,, RL & Motor load

10. Study the performance of three phase VSI with PWM control.

SPECIFICATIONS FRONT PANEL DETAIILS 1.Power :: Mains ON//OFF switch with indicator 2. Devices:: 30A/1200V IGBTs-6Nos, 16A/1200V Diodes--6Nos 3.DC Supply :: 0-200V Variable DC power supply 4. Gate pulses :: Six isolated Gate pulses 5. Testing Points :: Six testing points 6. Frequency :: 20 Hz to 50 Hz 7.Load :: Works with R,, RL & Motor load Experiments To construct & to study three phase VSI with PWM controls.

11. Study the performance of single phase AC Voltage controller with R and R-L Load
SPECIFICATION FRONT PANEL DETAIILS 1. Power Device :: 16A/1200V TRIIAC 1Nos,, 2.Protection :: Fuses, Heat sink,, Snub err ckts 3. Power :: Mains ON/OFF switch with indicator 4. Firing Circuit :: Line synchronized Triggering circuit 5. Firing Angle :: 0-1800 through potentiometer 6. Gate pulses :: Two isolated Gate pulse 7. Testing Points :: Six testing points Input Source :: Through built-in 24V isolation transformer Loads :: Works with R,, RL load Experiments AC Voltage controller with R and R-L Load

12. Study of the resonant inverter.


1. Power :: Mains ON/OFF switch with indicator 2. Devices :: 16A/1200V SCR-2Nos 3.Inductor :: 100-0-100 mH 4.Capacitor :: 4.7 F-2Nos 5. Protection :: Fuse, Heat sink,Snub err ckts 6. Frequency :: 25Hz-100Hz 7.Gate signals :: Two isolated gate signals Experiments To construct & to study Resonant Inverter

You might also like