Scribd
Upload
142 views

Network Space MAX - How To Update en

The document provides instructions for updating the software on a LaCie Network Space MAX hard drive. It describes two methods for updating: 1) using the auto-update feature on the product's dashboard which will automatically check and install updates as they become available, and 2) manually updating using the LaCie Network Assistant software by downloading the latest update file and running it through the assistant program. Key steps are outlined for each method, including checking the currently installed version, downloading/installing any available updates, and verifying a successful update.

Uploaded by

tommysmith2
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
142 views

Network Space MAX - How To Update en

The document provides instructions for updating the software on a LaCie Network Space MAX hard drive. It describes two methods for updating: 1) using the auto-update feature on the product's dashboard which will automatically check and install updates as they become available, and 2) manually updating using the LaCie Network Assistant software by downloading the latest update file and running it through the assistant program. Key steps are outlined for each method, including checking the currently installed version, downloading/installing any available updates, and verifying a successful update.

Uploaded by

tommysmith2
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LaCie Network Space MAX DESIGN BY NEIL POULTON User Manual

Administering Your LaCie Network Space MAX page 57

4.16. Update Product Software


LaCie may improve your network hard drives software or add new features over time. See below for updating information. To find the latest version of Network Space MAX software, go to Dashbaord>Support. Under Configuration, look for Version (Fig. 95). The number that follows is the version of software installed on your Network Space MAX. Note that you can always restore your drive to factory defaults by following the procedure in 4.17. Reset to Factory.

Fig. 94

4.16.1. Method 1: Auto-Update


Your network hard drive is by default configured to obtain the latest software updates through the internet. The Support page of your products Dashboard will check if updates are available and install them if you wish. Alternatively, if you prefer to update your drive manually or are on a restricted network, you can accomplish this using LaCie Network Assistant (see 4.17. Reset to Factory). 1. Open Dashboard > Support. 2. In the Auto-Update box, click the gray downward-facing arrow to check for a new update (Fig. 94). 3. If an update is available, the download will begin automatically. 4. Once the download has concluded, click the Details link to see the change log. Click the Install button to continue (Fig. 95). 5. The drive will reboot and will therefore disappear from the network temporarily (Fig. 96). Installation can take several minutes. When it reappears, you can verify the new software version on Dashboard > Support.

Fig. 95

Fig. 96

LaCie Network Space MAX DESIGN BY NEIL POULTON User Manual

Administering Your LaCie Network Space MAX page 58

4.16.2. Method 2: Update with LaCie Network Assistant Software


This update procedure will not erase your configuration or files saved to the drive.

Recommendations for Updating Using LaCie Network Assistant


Connect your PC or Mac to the network using an Ethernet cable (turn off wireless connection) Make sure users on your network have stopped data transfers to the NAS Turn off other NAS on the network except the one you wish to update Disconnect all connections to shares on the NAS you want to update 1. Make sure you are using the latest version of LaCie Network Assistant (minimum 1.4.1). If you download a newer version, make sure to uninstall previous versions. 2. Download the latest software update for your product from here. 3. Run LaCie Network Assistant. 4. Go to Preferences and make sure IPConf Support is deactivated (Fig. 97). 5. Select your product from the list on the left and click on the Update your NAS button (Fig. 98). Enter your admin username and password. 6. Browse to and load the update package (.capsule file) you downloaded (Fig. 99). 7. Click on Continue... to begin update. Mac users may have to type in their administrators password. Installation can take several minutes. 8. Once the update is complete, verify the update: Click the LaCie Network Assistant logo in the menu bar (Mac) or task bar (Windows) and select Configuration Window. Click the Network tab, where the system version will be listed. 9. If the update has failed despite the network precautions listed in the box above, connect the drive directly to your computer using the Ethernet cable, then try again.

Fig. 97

Fig. 98

Fig. 99

You might also like