Form 12-30 04-16d

Sheet 1 of 14

ROAD FORCE TOUCH ELITE (RFE) (For Domestic and Export)

 2016 Hunter Engineering Company
SHEET 3 SHEET 4 SHEET 5

SHEET 7 SHEET 8

SHEET 6

SHEET 9

SHEET 10 SHEET 11

SHEET 12 SHEET 14
SHEET 13

ROAD FORCE TOUCH ELITE (RFE) (For Domestic and Export)

REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 2 of 14

Sheet
Description (PDF navigation - click on image or description to go to sheet)
No.

3 COLLET STORAGE AND PRINTER OPTION

4 TUB EXTERIOR COMPONENTS AND WING NUT

5 HOOD AND SMARTSCAN

6 ELECTRIC PANEL

7 VIBRATION STRUCTURE

8 VIBRATION STRUCTURE

9 SPEEDCLAMP FEATURE

10 TOUCH SCREEN SUPPORT

11 INFLATION SUPPORT ASSEMBLY, 11-1633-1

12 LOAD ROLLER

13 LOAD ROLLER MANIFOLD

14 TOP DEAD CENTER LASER SYSTEM

ADDITIONAL PARTS DRAWING

Form Number Description BALANCERS

1 Form 12-28 BALANCER WHEEL LIFT (KIT 20-3101-1) RFE1X, RFE3X

BASE ASSEMBLIES
Part Number Description BALANCERS

1 72-604-1 BASE, RFT BALANCE, GEN5 RFE00, RFE01. RFE02, RFE03

2 72-604-1 BASE, RFT BALANCE, GEN5 RFE10, RFE11. RFE12, RFE13

3 72-630-1 BASE, RFT BALANCER SC RFE20, RFE21. RFE22, RFE23

4 72-630-1 BASE, RFT BALANCER SC RFE30, RFE31. RFE32, RFE33

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
COLLET STORAGE AND PRINTER OPTION
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 3 of 14

Index
Part Number Description Qty.
No.
1 base BASE, RFT BALANCER
2 14-1470-005 BRACKET, CONE SUPPORT 1
3 75-758-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X .63 INCH 4
and 76-414-2 NUT-HEX INSERT 1/4-20 4
4 56-70-2 CARRIER, CONE, BALANCER FRONT LEFT-HAND 1
5 20-2711-1 KIT, GEN 4 BALANCER CENTERING (Standard on RFT) (Consisting Of:) 1
6 20-2683-1 KIT, P-3/4TON DUAL TAPER COLLET 1
7 192-213-1 CONE, 2.10-2.31, 2.26-2.47 (GREY / BLACK STRIPED) 1
8 192-214-1 CONE, 2.42-2.63, 2.58-2.79 (YELLOW / BLACK STRIPED) 1
9 192-215-1 CONE, 2.74-2.95, 2.89-3.11 (SMALL GREEN / BLACK STRIPED) 1
10 192-216-1 CONE, 3.05-3.27, 3.21-3.42 (SMALL BLUE / BLACK STRIPED) 1
11 192-217-1 CONE, 3.37-3.58, 3.53-3.74 (RED / BLACK STRIPED) 1
12 192-218-1 CONE, 3.69-3.90, 3.85-4.06 (ORANGE / BLACK STRIPED) 1
13 192-219-1 CONE, 4.01-4.22, 4.17-4.38 (LIGHT GREY / BLACK STRIPED) 1
14 192-220-1 CONE, 4.32-4.54, 4.48-4.70 (PURPLE / BLACK STRIPED) 1
15 192-221-1 CONE, 4.64-4.85, 4.80-5.01 (BIG GREEN / BLACK STRIPED) 1
16 192-222-1 CONE, 4.96-5.17, 5.12-5.33 (BIG BLUE / BLACK STRIPED) 1
17a 46-653-2 SPACER, 1.50 INCH WHEEL OFFSET MTG (Not Illustrated) 1
17b 175-392-1 ADAPTOR, BALANCER CUP WITH RETAINER 6 INCH 1
17c 106-157-2 SLEEVE, CLAMPING 6 INCH CUP 1
18 20-2680-1 KIT, BALANCER SOFTWARE (Not Illustrated) 1
19 20-1650-1 KIT, RIM TAGS (Not Illustrated) 1
20 20-2714-1 SHELF PRINTER, GEN 4 BALANCER (Optional) (Consisting Of:) 1
21 76-368-2 NUT, LOCK 1/4-20 NYLON INSERT 2
22 77-144-2 WASHER, FENDER 1/4 INCH 2
23 77-67-2 WASHER, FLAT 1/4 INCH 2
24 75-29-2 HEX HEAD CAP SCREW 1/4-20X.75 INCH 2
25 38-954-2 CABLE, USB 2.0 A/B 2 METER (Not Illustrated) 1
26 28-90-2 FASTENER, VELCRO 2 INCH HOOK SIDE (Not Illustrated) 1
27 28-89-2 FASTENER, VELCRO 2 INCH LOOP SIDE (Not Illustrated) 1
28 215-179-1 SHELF ASSEMBLY, PRINTER (Consisting Of:) 1
29 215-180-005 SHELF, PRINTER TOP 1
30 215-134-005 SHELF, PRINTER SUPPORT BALANCER 2
31 71-236-005 SIDE, PRINTER SHELF BALANCER 2
32 171-283-005 PANEL, REAR PRINTER SHELF 1
33 48-56-2 RIVET, BLIND 3/16 X 1/4 INCH 23
34 75-458-2 SCREW, SELF-TAPPING 10-16 X 1 INCH 2
35 38-1155-2 CABLE, IEC C13/C14 3 FEET (Not Illustrated) 1
36 38-911-2 CABLE, MONITOR POWER TO PC POWER (Not Illustrated) 1
37 128-1628-3 DECAL, RS BALANCER DOMESTIC (Not Illustrated) 1
OR 128-1678-3 DECAL-RFE BAL, EXPORT (Not Illustrated) (Not for USA or Canada) 1
38 128-603-2 DECAL, AIR PRESSURE LIMITS (Not Illustrated) 1
39 24-164-2 NAMEPLATE GSP9700 PATENT (Not Illustrated) 1
40 128-1419-3 DECAL, WHEEL BALANCER SAFETY (Not Illustrated) 1

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
TUB EXTERIOR COMPONENTS AND WING NUT
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 4 of 14

Index
Part Number Description Qty.
No.
1 69-1559-2 COVER, WEIGHT TRAY TRIMMED 1
2 51-2168-2 PLATE, WEIGHT ANVIL 9200 1
3 75-68-2 FLAT HEAD SOCKET CAP SCREW 1/4-20 X .75 INCH 2
4 128-1639-2 DECAL, ROAD FORCE ELITE 1
5 20-2145-1 KIT, GSP BALANCER ACCESSORIES (Consists Of:) 1
6 65-72-2 WEIGHT, CALIBRATION (Not Illustrated) 1
7 98-303-2 SPRING, HOOD 1
8 216-43-2 HOOK, LOWER SPRING MOUNT, GSP BALANCER 1
9 233-44-2 POST, CONE HOOK PLASTIC 9
10 175-353-1 ADAPTOR, BALANCER CUP WITH RETAINER (Includes) 1
11 41-138-2 RETAINER-ROUND WIRE, 2.00 DIAMETER 1
12 46-320-2 SPACER, SPINDLE SHAFT (Not Illustrated) 1
13 106-82-2 SLEEVE, CLAMPING CUP (Not Illustrated) 1
14 223-68-1 RING, BALANCER PRESSURE WITH RETAINER (Not Illustrated) 1
15 14-1346-005 BRACKET, BALANCER LEG LONG 1
16 75-317-2 SCREW, THREAD ROLLING 1/4-20 X 5/8 INCH 2
17 221-589-2 TOOL, WEIGHT HAMMER / PLIERS (Not Illustrated) 1
18 221-658-2 TOOL, NYLON HAMMER HEAD (Not Illustrated) 1
19 221-659-2 TOOL, ADHESIVE WEIGHT REMOVER (Not Illustrated) 1
20 76-433-3 NUT, FORGED WINGNUT WITH HANDLES (Consists Of:) 1
21 76-426-2 NUT, FORGED WINGNUT 1
22 130-250-3* BEARING WITH WASHER, NEEDLE 55 mm* 1
23 130-250-3* BEARING WITH WASHER, NEEDLE 55 mm * 1
24 112-87-2 SNAP RING, SMALLEY WS-200 1
25 142-148-2 HANDLE, WINGNUT 2
26 106-154-2 SLEEVE, WINGNUT HANDLE 2
27 74-206-2 SOCKET HEAD CAP SCREW 1/2-13 X 2 INCH, (FULL-THREAD) 2
28 216-111-2 HOOK, FLOOR / SHIPPING HOLD DOWN 3
29 64-158-2 PAD, FOOT 1
30 75-413-2 SCREW, SELF-TAPPING 10-32 X .50 INCH 2
31 12-145-2 CLAMP, CABLE 1/4 INCH DIAMETER 1
32 75-584-2 TRUSS HEAD MACHINE SCREW 4-40 X 5/8 INCH 4
33 76-366-2 NUT, LOCK 4-40 NYLON INSERT 6
34 75-401-2 TRUSS HEAD SHEET METAL SCREW 10 X 1/2 INCH 8
35 18-497-1 SWITCH, REED SWITCH ASSEMBLY 2
36 14-1116 BRACKET, 9722 HOOD SWITCH 1
37 130-244-2 BEARING, WHEEL COVER 2
38 112-80-2 SNAP RING, EXTERNAL, 1.75 DIAMETER 1
39 74-590-2 SHOULDER SCREW, SPECIAL 1/2 INCH DIAMETER 1
40 130-172-2 BEARING, SEALED BALL 2
41 112-124-2 SNAP RING, INTERNAL 1.125 INCH 1
42 45-1403-1 PCA, WHEEL LIGHT XPE 1
43 69-1375-2 COVER, SPINDLE LED 1
44 75-801-2 SCREW, SELF-TAPPING 6-32 X 3/4 INCH 4
45 44-38-2 WINDOW, WHEEL ILLUMINATION 1
46 37-625-1 WIRE ASSEMBLY, SPINDLE LIGHT 1
47 69-1028-PPP COVER, SPINDLE DRIVE MOTOR 1
48 75-401-2 TRUSS HEAD SHEET METAL SCREW 10 X 1/2 INCH 4
49 76-413-2 NUT, HEX INSERT 5/16-18 2
50 43-111-2 PLUG, 7/8 INCH DIAMETER HOLE 1
* Wingnut service item 130-250-3 contains needle thrust bearing and two thrust washers (only one washer is needed).

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
 REFER TO PREVIOUS SHEET FOR
ADDITIONAL HOOD COMPONENTS:
BEARINGS, SPRING, ETC.

HOOD AND SMARTSCAN

REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 5 of 14

Index
Part Number Description Qty.
No.
1 69-1567-1 COVER, GEN5 HOOD ASSEMBLY (Consisting Of:) 1
2 16-1115-1-005 TUBE ASSEMBLY, WHEEL COVER, RFT 1
3 46-445 SPACER, MAGNET 1
4 60-24-2 MAGNET, REED SWITCH ACTUATOR 1
5 75-199-2 ROUND HEAD MACHINE SCREW 4-40 X 7/8 INCH 2
6 76-366-2 NUT, LOCK 4-40 NYLON INSERT 2
7 75-865-2 SCREW, SPECIAL 1/4-20 1
8 112-173-2 RETAINING RING, SPLIT 3/16 INCH DIAMETER 1
9 38-1290-2 CABLE, USB 2.0 A/B 3 METER 1
10 38-1284-1 CABLE, ENCODER / OUTER CAMERA 1
11 53-221-2 CAP, VINYL 1.5 INCH ID X 4 INCH 1
12 69-1562-2 COVER, WHEEL, GEN5 BALANCER 1
13 69-1368-2 COVER, RR WHEEL WITH LOAD ROLLER 1
14 94-35-2 TIE-WIRE, 15 INCH X 1/2 INCH 7
15 75-128-2 PAN HEAD MACHINE SCREW 1/4-20 X 3/4 INCH 3
16 76-367-2 NUT, FLANGE 1/4-20 3
17 12-244-005 CLAMP, WHEEL COVER 1
18 76-26-2 NUT, HEX 3/8-16 1
19 228-94-2 STOP, HOOD FRONT 1
20 75-870-2 SCREW, SELF-TAPPING 10-14 X 5/8 INCH 2
21 140-116-2 CYLINDER, AIR, 1 1/2 INCH DIAMETER 1
22 145-492-2 FITTING, 1/4 INCH NPT, 5/32 INCH TUBE, 90 2
23 177-92-005 PIVOT, HOOD CYLINDER 1
24 135-590-2 PIN, CLEVIS 2 X 3/8 DIAMETER 1
25 135-424-2 PIN, HAIRPIN COTTER PIN-FOR 1
26 77-435-2 WASHER, FLAT .507 ID .118 INCH THICK 1
27 74-594-2 SCREW, SHOULDER .500 DIAMETER X .375 INCH 1
28 108-230-2 VALVE, 5/32 IN-LINE FLOW CONTROL 2
29 16-450-2 TUBE, AIR 5/32 INCH OD 18
30 94-17-2 TIE-WIRE SUPPORTS STICK ON 2
31 20-3162-1 KIT, RIM SCAN COMPONENTS 1
32 125-493-1 SENSOR, BALANCER OUTER CAMERA 1
33 125-496-1 SENSOR, BALANCER OUTER CAMERA SUB-ASSEMBLY 1
34 179-82-2 SHIELD, OUTER LASER 1
35 69-1554-2 COVER, OUTER LASER 1
36 75-863-2 CAPTIVE SCREW 4-40X0.5 INCH 1
37 75-861-2 PAN HEAD MACHINE SCREW 4-40 X 1/2 INCH 1
38 75-862-2 PAN HEAD MACHINE SCREW 4-40X1 1/2 INCH 1
39 112-174-2 RETAINING RING, E STYLE 7/64 1
40 75-24-2 ROUND HEAD MACHINE SCREW 6-32 X .38 INCH 2
41 94-50-2 TIE-WIRE 15 INCH X .298 INCH 1
42 14-1629 BRACKET, SUPPORT / SHIELD 1
43 75-401-2 TRUSS HEAD SHEET METAL SCREW 10 X 1/2 INCH 2
44 125-492-1 SENSOR, BALANCER INNER CAMERA 1
45 125-495-1 SENSOR, BAL INNER CAMERA SUB-ASSEMBLY 1
46 179-81-2 SHIELD, INNER LASER 1
47 69-1526-2 COVER, INNER LASER HOUSING 1
48 75-861-2 PAN HEAD MACHINE SCREW 4-40 X 1/2 INCH 1
49 75-862-2 PAN HEAD MACHINE SCREW 4-40 X 1 1/2 INCH 1
50 75-863-2 CAPTIVE SCREW 4-40 X 0.5 INCH 1
51 112-174-2 RETAINING RING, E STYLE 7/64 1
52 49-88-2 GASKET, CABLE SEAL 1
53 75-671-2 SOCKET BUTTON HEAD CAP SCREW 10-32 X 3/4 INCH 2
54 38-1283-1 CABLE, ENCODER/INNER CAMERA 1
55 38-954-2 CABLE, USB 2.0 A/B 2 METER 1

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
 ELECTRIC PANEL
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 6 of 14

Index
Part Number Description Qty.
No.
1 232-300-1 ELECTRIC PANEL, GEN5 BALANCER (Consisting Of:) 1
2 51-2929-1 PLATE ASSEMBLY, ELECTRONICS, GEN4 (Includes:) 1
3 46-750-2 SPACER, PRESS IN 6-32 X .75 INCH LONG 1
4 46-749-2 SPACER, SNAP TOP STANDOFF, .75 7
5 46-751-2 SPACER-NYLON PUSH IN .63 INCH HIGH 2
6 232-205-2 DC MOTOR DRIVE, 230V/8A 1
7 46-704-2 SPACER #8 X .25 INCH LONG 4
8 136-108-2 FILTER, POWER LINE RFI 1
9 81-82-1 RESISTOR ASSEMBLY, 75 OHM WITH LEADS 1
10 18-270-2 SWITCH, DOUBLE PULL SINGLE THROW ROCKER 1
11 46-705-2 STANDOFF, 3/8 HEX, 8-32 X 1-1/4 INCH 2
12 75-24-2 ROUND HEAD MACHINE SCREW 6-32 X .38 INCH 8
12A 77-12-2 WASHER, LOCK #6 INTERNAL LOCK 4
13 38-1215-2 POWER CORD, SPLIT IEC 1
14 38-845-1 CABLE ASSEMBLY, POWER GSP9700 1
15 59-62-2 STRAIN RELIEF, HEYCO #1244 2
16 36-67-1 RECEPTACLE ASSEMBLY, GEN4 BAL 1
17 38-1148-1 CABLE ASSEMBLY, MOTOR CONTROL 1
18 37-628-1 WIRE ASSEMBLY, MOTOR 1
19 76-71-2 NUT-KEPS 8-32 2
20 232-277-1* ELECTRIC ASSEMBLY-BALANCER, RELAY (Consisting Of:) 1
21 14-1507-1 BRACKET ASSEMBLY, BALANCER RELAY 1
22 18-571-2 RELAY, BALANCER DC DRIVE 2
23 19-282-2 TERMINAL STRIP, 4 COND, 4 POLE 1
24 37-477-1 WIRE ASSEMBLY, 9700 POWER SWITCH (Not Illustrated) 1
25 37-656-1 WIRE ASSEMBLY, BALANCER RELAY POWER SPLIT (Not Illustrated) 1
26 75-171-2 ROUND HEAD MACHINE SCREW 4-40 X 5/16 INCH 6
27 37-652-1 WIRE ASSEMBLY, GEN4 BALANCER POWER SWITCH 1
28 37-633-1 WIRE ASSEMBLY, BALANCER RELAY TO DRIVE 1
29 37-657-1 WIRE ASSEMBLY, BALANCER TERMINAL TO FILTER 1
30 75-32-2 ROUND HEAD MACHINE SCREW 8-32 X 3/8 INCH 2
31 37-694-1 WIRE ASSEMBLY, GEN5 BALANCER RELAY POWER 1
32 75-802-2 SCREW, SELF-TAPPING 10-32 X 3/8 INCH 4
33 69-1558 COVER, ELECTRONICS, LEFT-HAND 1
34 75-682-2 SCREW, SELF-TAPPING 8-32 X 5/16 INCH GREEN 1
35 75-327-2 SCREW, SELF-TAPPING 8-32 X 1/2 INCH 2
36 69-1564 COVER, ELECTRONICS, RIGHT-HAND 1
37 75-49-2 ROUND HEAD MACHINE SCREW 6-32 X 1/2 INCH 1
38 45-1513-1 PCA, BALANCER DAQ-USB 1
and 21-204-2 CONNECTOR .1 2 CIRCUIT JUMPER (S3) (Not Shown) 1
39 113-258-2 BUSHING, PUSH ON TRIM 1.25 in

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
 VIBRATION STRUCTURE
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 7 of 14

Index
Part Number Description Qty.
No.
1 105-689-1 HOUSING, SPINDLE W/ DIFF ENCODER (For Speed-Clamp) (Consists Of:) 1
OR 105-677-1 HOUSING, SHAFT W/ DIFF ENC (NOT For Speed-Clamp) (Not Ill.) (Cons. Of:) 1
AND 97-531-2* SHAFT-THREADED, REMOVABLE (export only) (Not Illustrated) 1
2 105-486-1 HOUSING, SPINDLE / DRIVE ASSEMBLY (For Speed-Clamp) (Includes:) 1
OR 105-541-1 HOUSING, SOLID SHAFT (NOT For Speed-Clamp) (Not Illustrated) (Includes:) 1
3 41-221-2 RETAINER, SPRING COVER 1
4 112-112-2 SNAP RING, INTERNAL 115 mm 1
5 98-381-2 SPRING, CONE 1
6 75-152-2 PAN HEAD MACHINE SCREW 8-32 X 5/16 INCH 2
7 45-1531-1 PCB, SPINDLE ENCODER DIFF OUT 1
8 53-155-2 PLUG, PLASTIC FOR 5/8 INCH HOLE 1
10 107-133-2 PULLEY, DRIVEN 14 RIB 1
11A 76-470-2 NUT, AUTOCLAMP PULLEY NUT (For Speed-Clamp) 1
11B 77-239-2 WASHER, FLAT 5/8 INCH SPECIAL (NOT For Speed-Clamp) 1
11C 74-365-2 HEX HEAD CAP SCREW M16-2X35 mm GRADE 8.8 (NOT For Speed-Clamp) 1
12 98-416-2 SPRING, BRAKE RELEASE 1
13 106-155-2 SLEEVE, BRAKE ISOLATOR 1
14 164-124-1 LEVER, SPINDLE BRAKE ASSEMBLY, WIDE 1
15 177-67-1-005 PIVOT, SPINDLE BRAKE ASSEMBLY 1
16 112-21-2 SNAP RING-#5103-75 1
17 75-177-2 ROUND HEAD MACHINE SCREW 1/4 – 20 X .88 INCH 2
18 77-71-2 WASHER, LOCK 1/4 INCH HELICAL SPRING 2
19 14-1132 BRACKET, FOOTBRAKE SWITCH 1
20 76-61-2 NUT, KEPS 10-32 2
21 75-414-2 PAN HEAD MACHINE SCREW 8-32 X 3/4 INCH 1
22 76-37-2 NUT, HEX 5/16-18 2
23 77-180-2 WASHER, FENDER 5/16 INCH 3
24 77-60-2 WASHER, LOCK 5/16 INCH HELICAL SPRING 1
25 18-454-2 SWITCH, MINI SINGLE-PULL DOUBLE-THROW 2.93 INCH LEVER 1
26 75-75-2 ROUND HEAD MACHINE SCREW 4-40 X 5/8 INCH 2
27 76-366-2 NUT, KEPS 4-40 2
28 38-1026-1 CABLE ASSEMBLY, SPINDLE LOC 1
* Use Shaft, 97-531-2, and Housing, 105-689-1 together for non-speed-clamp export models

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
VIBRATION STRUCTURE (continued)
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 8 of 14

Index
Part Number Description Qty.
No.
29 129-270-1 MOTOR ASSEMBLY, DC, RS BALANCER (Includes:) 1
30 55-18-2 CORE, FERRITE (CYLINDRICAL) (Not Illustrated) 1
31 107-134-2 PULLEY, DRIVE, 14 GROOVE 1
32 75-66-2 SOCKET SET SCREW 1/4-20 X 1/4 INCH CUP POINT 2
33 126-50-2 BELT, POLY-V DRIVE, 14 RIB 1
34 77-66-2 WASHER, FLAT 3/8 TYPE A-W 3
35 74-207-2 HEX HEAD CAP SCREW 3/8-16 X 3 INCH 4
36 172-34-2 CAM, BELT TENSIONER 1
37 FIELD PURCHASE ADHESIVE, THREAD LOCKING (LOCKTITE 222) A/R
38 46-422-2 SPACER, MOTOR 4
39 74-59-2 HEX HEAD CAP SCREW, 3/8-16 X .75 INCH (FULL-THREAD) 4
40 76-428-2 NUT, 3/8-16, .615 INCH SQUARE X .25 INCH 4
41 77-297-2 WASHER, FLAT 3/8 INCH 4
42 38-1265-1 CABLE ASSEMBLY, SPINDLE ENCODER DIFF 1
43 63-256-2 ROD, THREADED 3/8-24 X 5.5 INCH 2
44 109-100-1 TRANSDUCER, 500# S-CELL WITH CONNECTIONS 1
45 76-485-2 NUT, HEX 3/8-24 GRADE 8 6
46 FIELD PURCHASE ADHESIVE, MEDIUM THREAD LOCKING (LOCKTITE 242) A/R
47 46-686-005 SPACER, BRAKE PIVOT - A 1
48 109-155-1 TRANSDUCER ASSEMBLY, GEN IV BALANCER 2
49 75-239-2 SOCKET HEAD CAP SCREW 1/4-20 X 1.00 INCH (FULL-THREAD) 4
50 77-373-2 WASHER, FLAT 3/8 INCH, GRADE 8 4
51 76-485-2 NUT, HEX 3/8-24, GRADE 8 4
52 77-381-2 WASHER, .26 ID x .49 OD x .035 INCH 2
53 177-90-1-005 PIVOT, BRAKE WELDMENT 1
54 164-119-005 LEVER, BRAKE 1
55 76-108-2 NUT, JAM 3/4-16 1
56 77-50-2 WASHER-LOCK 3/4 INCH INTERNAL TOOTH 1
57 135-436-2 PIN-DOWEL 1/4 X 1 3/8 INCH HARDENED 1
58 75-239-2 SOCKET HEAD CAP SCREW 1/4-20 X 1.00 INCH (Full-Thread) 1
59 76-51-2 NUT, JAM 1/4-20 1
60 63-295-2 ROD, BRAKE ACTUATOR SHORT 1
Items 1 – 28 are located on previous sheet.

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
 SPEEDCLAMP FEATURE
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 9 of 14

Index
Part Number Description Qty.
No.
1 14-1659-1 BRACKET, ASSEMBLY, SPEEDCLAMP RFT VALVE (Consisting Of:) 1
2 14-1640-005* BRACKET, ANTI ROTATE SPEEDCLAMP 1
3 49-84-2* GASKET-TC REAR PANEL 4
4 108-198-2 VALVE-PNEUMATIC SOLENOID 2
5 145-358-2* FITTING, 1/8 INCH NPT - 1/4 INCH PTC ELBOW 2
6 145-503-2* FITTING, 1/16 INCH NPT EXHAUST SILENCER 2
7 75-49-2 ROUND HEAD MACHINE SCREW 6-32 X 1/2 INCH 4
8 76-84-2 NUT-KEPS 6-32 4
9 16-843-2 TUBE, 1/4 INCH HOSE, FLEXIBLE 33.25 in
10 145-325-2 FITTING, 1/4 INCH Y 1
11 38-1094-1 CABLE, MANIFOLD ASSEMBLY 2
12 94-31-2 TIE-CABLE (BLU) (Not Illustrated) 3
13 76-368-2 NUT, LOCK 1/4-20 NYLON INSERT 2
13A 77-67-2 WASHER-FLAT 1/4 INCH 4
14 20-3176-1* KIT, RP-SPEEDCLAMP (Cylinder ONLY available as complete RP kit.*) 1
15 75-522-2 SCREW, SELF TAPPING 10-32 X .38 INCH 2
16 145-273-2 FITTING, 1/4 INCH HOSE X 1/4 NPT 1
17 145-324-2 FITTING, 1/8 NPT TO 1/4 INCH TUBE, 90 1
18 145-281-2 FITTING, 1/4 INCH HOSE X 1/8 NPT (Not Illustrated) 2
19 16-843-2 TUBE, 1/4 INCH HOSE, FLEXIBLE 33.5 in.
20 136-94-2 FILTER / REGULATOR, GSP AUTOCLAMP 1
21 145-350-2 FITTING, 1/4 TUBE-1/4 NPT 90 ELBOW 1
22 136-78-2 FILTER / REGULATOR, GSP9700 (supplied with ro1ler) REF.
23 137-96-1 HOSE ASSEMBLY, PNEUMATIC SUPPLY (Not Illustrated) REF.
24 20-3195-1 KIT, HUB ASSEMBLY, SPEEDCLAMP (Consisting Of:) 1
OR 20-3196-1 KIT, HUB ASSEMBLY, SPEEDCLAMP – EXPORT (Consisting Of:) 1
25 184-106-1 HUB ASSEMBLY, SPEEDCLAMP (Consists Of:) 1
26 184-105-2 HUB, SPEEDCLAMP CUP 1
27 217-61-2 COLLAR, AUTO-CLAMP CUP 1
28 144-105-2 LINK, PAWL AUTO-CLAMP 2
29 98-422-2 SPRING, TORSION AUTO-CLAMP 2
30 135-121-2 PIN, ROLL 1/4 INCH X 1 1/4 INCH 2
31 75-306-2 SOCKET HEAD CAP SCREW 8-32 X .31 INCH 4
32 Field purchase LOCTITE # 271 OR PERMA BOND # HM128 A/R
33 106-156-2 SLEEVE, CLAMP (Export Only) 1
34 124-165-2 SEAL, O RING AS568A-030 (Export Only) 1
35 175-353-1 ADAPTOR, BALANCER CUP WITH RETAINER REF
36 97-587-1 SHAFT ASSEMBLY, OUTER 40 mm AUTO-CLAMP (Consists Of:) 1
37 97-586-2 SHAFT, OUTER AUTO-CLAMP 1
38 97-585-2 SHAFT, OUTER WITH HEX 1
39 99-132-2 RATCHET, AUTO-CLAMP 1
40 113-280-2 BUSHING, OUTER SHAFT 2
41 76-458-2 NUT, GRIP 3/8-24 1
* Kit 20-3176-1 (Replacement Part - SpeedClamp Kit) contains identified items and instructions, Form 7076-T.

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
 TOUCH SCREEN SUPPORT
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 10 of 14

Index RFE
Part Number Description
No. Qty.
1 11-1659-1 SUPPORT ASSEMBLY, TOUCH DISPLAY, RS (Consisting Of:) 1
2 11-1434-1-005 SUPPORT ASSEMBLY, TOUCH DISPLAY, GEN4 (RFT) 1
3 45-1545-2 PCB-J1900 MINI-ITX MOTHERBOARD (INCLUDE 45-1547-2 RAM) 1
5 232-253-2 FLEX ATX 150 WATT POWER SUPPLY 1
6 75-24-2 ROUND HEAD MACHINE SCREW 6-32 X .38 INCH 3
7 14-1307 BRACKET, FLEX ATX 1
8 75-582-2 SOCKET BUTTON HEAD CAP SCREW 10-32 X .25 INCH 1
9 75-332-2 ROUND HEAD MACHINE SCREW 6-32 X 3/16 INCH 2
10 46-579-2 SPACER, NYLON PUSH IN .437 INCH HIGH 1
11 34-208-2 KNOB, 1/4-20 X 1/2 INCH 2
12 223-82-2 RING, TRIM, NAMEPLATE 1
13 24-178-2 NAMEPLATE, RFT BALANCER (HUNTER) 1
14 160-56-2 HINGE, MONITOR, TOUCH 1
15 51-2587-005 PLATE, MONITOR, HINGED 1
16 48-103-2 RIVET, BLIND 5/32 X 1/4 INCH, BLACK 6
17 190-193-1 SIGN, LIGHTED, DISPLAY SUPPORT (Assembly of PCA and clear window) 1
OR 45-1353-1-2 PCA, DISPLAY SUPPORT SIGN BALANCER (LED Circuit Board Only) 1
18 38-1082-2 CABLE ASSEMBLY USB BULKHEAD 1
19 69-1372-005 COVER, DISPLAY SUPPORT, TOUCH 1
20 75-775-2 SCREW, QUARTER TURN, SIZE 280, PR 6
21 76-490-2 NUT, QUARTER TURN, CLIP-ON 6
22 41-205-2 RETAIN, QUARTER TURN, 82 SERIES 6
23 75-735-2 PAN HEAD MACHINE SCREW 6-32 X 5/16 INCH 4
24 38-1185-2 CABLE, 5 PIN USB HDR F/F 24 INCH (TO USB ON ITEM 3) 3
25 38-1289-2 CABLE, 4 PIN MOLEX EXTENSION, 24 INCH 1
27 94-45-2 TIE, CABLE (BLACK) (Not Illustrated) 2
28 18-565-2 SWITCH ASSEMBLY, BALANCER MOTHER BOARD POWER 1
29 105-639-2 HOUSING, POWER BUTTON, OUTER 1
30 105-640-2 HOUSING-POWER BUTTON, INNER 1
31 128-1399-2 DECAL, DISPLAY COVER GEN IV 1
32 109-173-1 SPEAKER, ASSEMBLY 3.5 INCH WITH CABLE 1
33 76-71-2 NUT-KEPS 8-32 6
34 45-1451-1 MONO AUDIO AMP 1
35 37-653-1 WIRE ASSEMBLY, TIRE CHANGER AUDIO AMP POWER 1
36 216-118-005 HOOK, WEIGHT TRAY 1
37 75-414-2 PAN HEAD MACHINE SCREW 8-32X3/4 INCH 2
39 75-758-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X .63 INCH 4
AND 76-414-2 NUT-HEX INSERT 1/4-20 4
40 227-105-2 DISPLAY, 22 INCH LCD WITH TOUCH (Not Illustrated) 1
41 75-668-2 PAN HEAD MACHINE SCREW M4 X .7 X 10 mm (Not Illustrated) 2

** Customized signs are available for some OEMs and national accounts. Part numbers and description of signs are listed below:
24-182-2 KIA 24-194-2 ACURA CANADA 24-203-2 MOPAR
24-183-2 SUBARU 24-195-2 HONDA CANADA 24-204-2 ACURA DOMESTIC
24-184-2 HYUNDAI 24-196-2 ROTUNDA 24-205-2 HONDA DOMESTIC
24-187-2 BMW 24-197-2 BELLE TIRE 24-213-2 TIRECRAFT
24-188-2 JLR (Jaguar-Land Rover) 24-199-2 LEXUS 24-214-2 PORSCHE CANADA
24-189-2 MERCEDES-BENZ 24-200-2 TOYOTA 24-219-2 SENTURY
24-191-2 GM 24-201-2 NISSAN TM 24-220-2 GSP97MB
24-193-2 VAG 24-202-2 INFINITI TM

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
INFLATION SUPPORT ASSEMBLY, 11-1633-1
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 11 of 14

Index
Part Number Description Qty.
No.
1 11-1633-1 SUPPORT ASSEMBLY, INFLATION (Consists Of:) 1
2 11-1632-1-005 SUPPORT ASSEMBLY, INFLATION 1
3 105-648-1 HOUSING ASSEMBLY, BALANCER TIRE FILL (Consists Of:) 1
4 137-149-1 HOSE ASSEMBLY, BALANCER TIRE FILL (Includes) 1
5 145-241-2 FITTING, 1/4 BRASS STREET ELBOW 1
6 145-224-2 COUPLING, BULKHEAD 1
7 145-341-2 FITTING, AIR CHUCK LOCK-ON OPEN 1
8 105-645-1 HOUSING, TC INFLATION HOLSTER 1
9 145-350-2 FITTING, 1/4 INCH TUBE-1/4 INCH NPT 90 ELBOW 1
10 18-350-2 SWITCH, SUBMINIATURE LIMIT (included with holster (item 39)) REF
11 37-481-1 WIRE ASSEMBLY-GSP9700 TIRE FILL 1
12 14-1514-1 BRACKET ASSEMBLY-INFLATION MOUNT 1
13 75-436-2 SOCKET HEAD CAP SCREW 10-32 X 1.00 INCH (FULL-THREAD) 2
14 75-128-2 PAN HEAD MACHINE SCREW 1/4-20 X 3/4 INCH 4

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
 LOAD ROLLER
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 12 of 14

Index
Part Number Description Qty.
No.
1 111-156-1 ROLLER ASSEMBLY, RIM SCAN (Consisting Of:) 1
2 74-105-2 HEX HEAD CAP SCREW 3/8-16 X 1.00 INCH, GRADE 5 (FULL-THREAD) 6
3 77-21-2 WASHER, LOCK 3/8 INCH INTERNAL TOOTH 10
4 62-51-2 FOOT, PLASTIC 1.06 OD X 0.44 INCH HEIGHT 1
5 75-476-2 TRUSS HEAD SHEET METAL SCREW 10 X 3/4 INCH 1
6 113-197-2 BUSHING, LRO SENSOR 1
7 41-112 RETAINER, INNER DATASET 1
8 75-423-2 SCREW, SELF TAPPING 4-40 X .38 INCH 4
9 75-128-2 PAN HEAD MACHINE SCREW 1/4-20 X 3/4 INCH 4
10 77-67-2 WASHER, FLAT 1/4 INCH 4
11 98-283-2 SPRING, AIR ACTUATOR 1
12 74-220-2 SOCKET HEAD CAP SCREW 3/8-16 X .63 INCH (FULL-THREAD) 2
13 14-1162-1-005 BRACKET, AIRBAG 1
14 108-148-2 VALVE, QUICK EXHAUST W MUFFLER 1
15 135-333-2 PIN, DOWEL 3/8 X 1.00 INCH LONG 1
16 57-653-005 BAR, SHAFT ROLLER 1
17 135-53-2 PIN, ROLL 1/4 X 1 INCH 1
18 162-128-2 TAPE, NONSKID TREAD 24 INCH TRIMMED 1
19 111-90-3 ROLLER, LOADED RUNOUT (Consisting Of:) 1
20 111-924-2 ROLLER, LOADED RUNOUT 1
21 130-169-2 BEARING 35 mm X72 mm 2
22 Field Purchase LOCTITE RETAINING COMPOUND #609 A/R
23 69-1030 COVER, LOAD ROLLER END 2
24 Field Purchase TAPE, 3M 4920 DOUBLE COATED FOAM 6
25 112-109-2 SNAP RING, EXTERNAL WAVE 1.375 INCH 1
26 74-420-2 BOLT, LEVELING .81-12 OUTER DIAMETER X .59 INNER DIAMETER 2
27 74-206-2 SOCKET HEAD CAP SCREW 1/2-13 X 2.00 INCH (FULL-THREAD) 2
28 77-22-2 WASHER, LOCK 1/2 INCH INTERNAL TOOTH 2
29 77-295-2 WASHER, .515 X 1.00 X .19 INCH THICK 2
30 112-110-2 SNAP RING INTERNAL, 90.5 mm DIAMETER 1
31 130-170-2 BEARING, 50 mm INNER DIAMETER X 90 mm OUTER DIAMETER 1
32 105-401-2 HOUSING, LOAD ROLLER BEARING 1
33 112-111-2 SNAP RING, SMALLEY WHW-312 1
34 130-137-2 BEARING, 40 mm INNER DIAMETER X 80 mm OUTER DIAMETER 1
35 112-106-2 SNAP RING, TRUARC 5008-315 1
36 75-508-3 FLAT HEAD MACHINE SCREW 10-32X.50 INCH 1
37 124-117-2 O-RING .989 INNER DIAMETER X .070 INCH 1
38 46-504-2 SPACER, 7/16 X 7/8 X 5/16 INCH THICK 2
39 74-418-2 SOCKET HEAD CAP SCREW 3/8-16 X 2.00 INCH 3
40 77-296-2 WASHER, .407 X 1.00 X .19 INCH THICK 2
41 112-79-2 SNAP RING, EXTERNAL, 1-9/16 INCH DIAMETER 1
42 103-272-1-005 ARM, LOADED RUNOUT, GEN 5 1
43 97-450-2 SHAFT, ROLLER 1
44 112-83-2 SNAP RING, TRUARC 5108-137 1
45 16-321-2 TUBE, 5/16 INCH OUTER DIAMETER 9 ft.
46 76-159-2 NUT, KEPS 3/8-16 1
47 98-303-2 SPRING, HOOD 1
48 128-603-2 DECAL, AIR PRESSURE LIMITS (Not Illustrated) 1
49 137-96-1 HOSE ASSEMBLY, PNEUMATIC SUPPLY 1
50 176-35-1 LOCATOR ASSEMBLY, MAGNET 1
51 125-395-3 SENSOR, HALL, LOAD ROLLER 1
52 75-522-2 SCREW, SELF-TAPPING 10-32 X .38 INCH 2
53 145-184-2 FITTING, 1/4 INCH NPT ADAPTOR 1
54 75-248-2 ROUND HEAD MACHINE SCREW 10-24 X 3/8 INCH 2
55 108-274-1 PNEUMATIC ASSEMBLY, BALANCER, HIGH-FLOW (See Sheet 13) 1
56 136-78-2 FILTER / REGULATOR, GSP9700 1
57 145-399-2 FITTING, REDUCER 5/16 – 1/4 INCH TUBE
58 113-179-2 BUSHING, BRAKE ACTUATOR ROD (Not Illustrated) 1

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
 LOAD ROLLER MANIFOLD
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 13 of 14

Index
Part Number Description Qty.
No.
1 111-156-1 LOAD ROLLER ASSEMBLY, GEN5 (Includes:) REF
2 108-274-1 PNEUMATIC ASSEMBLY, BALANCER, HIGH-FLOW (Consisting Of:) 1
3 185-42-2 MANIFOLD, PNEUMATIC, HIGH-FLOW (Not Available) 1
4 108-195-2 VALVE, 3 PORT MANIFOLD MT. 1
5 108-260-2 VALVE, PNEUMATIC SOLENOID 1
6 108-276-2 VALVE, 5 PORT MANIFOLD MT 1
7 38-1094-1 CABLE, MANIFOLD ASSEMBLY 3
8 145-357-2 FITTING, 1/4 PLUG-IN ELBOW 1
9 145-281-2 FITTING, 1/4 HOSE X 1/8 NPT 1
10 145-183-2 FITTING, 1/4IN NPT ELBOW SWIVEL 1
11 145-467-2 FITTNG, 1/4 TO 5/32 PLUG-IN ELBOW 1
12 145-324-2 FITTING, 1/8NPT TO 1/4 TUBE 90 2
13 18-600-2 SWITCH, PRESSURE- 65 PSI 1
14 38-1164-1 CABLE ASSEMBLY, DAQ TO INFLATION PRESS SW 1
15 125-465-1 SENSOR, PRESSURE 1
16 38-1202-1 CABLE ASSEMBLY, TC PRESSURE/TEMPATURE SENSOR 1
17 Field Purchase LOCTITE #545 THREAD SEALANT A/R

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
TOP DEAD CENTER LASER SYSTEM
REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING
 Form 12-30, 04-16d
PARTS DESCRIPTION LISTING Sheet 14 of 14

Index
Part Number Description Qty.
No.
1 20-2892-1 KIT, TOP DEAD CENTER LASER SYSTEM GEN 4 (Consists Of:) 1
2 16-912-1-005 TUBE ASSEMBLY, TDC LASER SUPPORT 1
3 11-1243-2 SUPPORT, TDC LASER BASE 9700 1
4 14-1129-2 BRACKET, TDC LASER BASE 1
5 105-657-1 HOUSING, TDC LASER HEADER ASSEMBLY LED (Consists Of:) 1
6 105-514-2 HOUSING, TDC LASER HEADER 1
7 14-1496-005 BRACKET, LED LIGHT BACK 1
8 35-176-2 LAMP-LED LIGHT STRIP SHORT 1
9 69-1460-005 COVER, LED LIGHT 1
10 76-12-2 NUT, HEX 6-32 2
11 75-162-2 ROUND HEAD MACHINE SCREW 6-32 X .31 INCH 2
12 14-1130-2 BRACKET, TDC LASER MOUNT 2
13 105-530-1 HOUSING, TDC LASER ASSEMBLY 2
14 98-427-2 SPRING, TDC LASER ADJUSTMENT 2
15 76-61-2 NUT, KEPS 10-32 2
16 75-608-2 PAN HEAD MACHINE SCREW 10-32 X .31 INCH 5
17 76-382-2 NUT-T 5
18 190-192-2 SIGN, TDC LASER SYSTEM 1
19 69-1204-2 COVER, TDC LASER END CAP 2
20 Field Purchase ADHESIVE, LOCTITE 242 A/R
21 75-535-2 LOW HEAD SOCKET CAP SCREW 1/4-20 X .38 INCH 2
22 75-161-2 PAN HEAD MACHINE SCREW 10-32 X .50 INCH 4
23 76-11-2 NUT, HEX 10-32 4
24 128-1155-2 DECAL, LASER COMPLIANCE 2M 1
25 128-1308-2 DECAL, RX CABLE WRAP, RIGHT (Not Illustrated) 1
26 128-1309-2 DECAL, RX CABLE WRAP, LEFT (Not Illustrated) 1
27 77-35-2 WASHER, FLAT 5/8 INCH 2
28 12-158-2 CLAMP, CABLE NYLON .312 INCH DIAMETER 3
29 76-13-2 NUT, HEX 1/4-20 4
30 77-65-2 WASHER, FLAT 3/8 INCH 6
31 74-16-2 HEX HEAD CAP SCREW 3/8-16 X 2.50 INCH (FULL-THREAD) 2
32 74-59-2 HEX HEAD CAP SCREW 3/8-16 X .75 INCH (FULL-THREAD) 4
33 76-13-2 NUT, HEX 1/4-20 6
34 74-461-2 BOLT, FLAT HEAD SOCKET CAP SCREW 3/8-16 X 1/4 INCH 2
35 38-1206-2 CABLE, PC POWER SUPPLY ADAPTOR (Not Illustrated) 1
36 77-45-2 WASHER-FLAT 3/16 (Not Illustrated) 2
37 76-159-2 NUT, KEPS 3/8 – 16 (Not Illustrated) 4
38 76-367-2 NUT, FLANGE 1/4 - 20 4
39 75-703-2 HEX HEAD CAP SCREW 1/4-20 X 1.5 INCH GRADE 8 4
40 51-2332-1-005 PLATE, TDC HAMMERHEAD MOUNT ASSEMBLY 1
41 69-1271-2 COVER, TDC ADJUSTMENT 1
42 98-443-2 SPRING, TDC LASER ADJUSTMENT 4
43 134-141-2 STUD, 1/4-20 DOUBLE ENDED, BRASS 2
44 75-877-3 SOCKET HEAD CAP SCREW 1/4-20 X 2.00 INCH NYLON 4
45 75-535-2 LOW HEAD SOCKET CAP SCREW 1/4-20 X .38 INCH (Not Illustrated) 2
46 37-693-1 WIRE ASM, GEN3 LED HAMMERHEAD (for retrofitting to a GEN 3 ) (Not Illus.) 1

PPP-Paint Code Required

A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044