Scribd
Upload
77 views8 pages

Transformer Data Sheet (IFC) (Approved)

This document is a product data sheet for Distro DT-11 insulating oil. It provides specifications and test results for various properties of the oil, including: - Viscosity at different temperatures within specification limits - Pour point well below minimum specification of -30°C - Water content and breakdown voltage meet specifications - Density and oxidation stability test results are better than specifications - Flash point and contaminant levels are within health, safety and environmental limits. The oil is an uninhibited type developed for distribution transformers with voltages under 72kV.

Uploaded by

bambang sugito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views8 pages

Transformer Data Sheet (IFC) (Approved)

This document is a product data sheet for Distro DT-11 insulating oil. It provides specifications and test results for various properties of the oil, including: - Viscosity at different temperatures within specification limits - Pour point well below minimum specification of -30°C - Water content and breakdown voltage meet specifications - Density and oxidation stability test results are better than specifications - Flash point and contaminant levels are within health, safety and environmental limits. The oil is an uninhibited type developed for distribution transformers with voltages under 72kV.

Uploaded by

bambang sugito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

B 05/09/2022 Issued For Construction MTH SDR REI ARN/BS DN

7
PRODUCT DATA SHEET

Distro DT-11
PROPERTY UNIT TEST METHOD SPECIFICATION LIMITS TYPICAL DATA
MIN MAX
1 - Function
Viscosity, 40°C mm /s
2
ISO 3104 12.0 11.5
Viscosity, -20°C mm /s
2
ISO 3104 1800 470
Pour point °C ISO 3016 -30 -54
Water content mg/kg IEC 60814 30 <20
Breakdown voltage
- Before treatment kV IEC 60156 30 40-60
- After treatment kV IEC 60296 70 >70
Density, 20°C kg/dm
3
ISO 12185 0.895 0.875
DDF at 90°C IEC 60247 0.005 <0.001
2 - Refining/stability
Appearance IEC 60296 Clear, free from sediment complies
Acidity mg KOH/g IEC 62021 0.01 <0.01
Interfacial tension mN/m EN 14210 40 >40
Corrosive sulphur DIN 51353 non-corrosive non-corrosive
Potentially corrosive sulphur IEC 62535 non-corrosive non-corrosive
Corrosive sulphur ASTM D 1275 B non-corrosive non-corrosive
DBDS mg/kg IEC 62697-1 not detectable not detectable
Antioxidant wt % IEC 60666 not detectable not detectable
Metal passivator additives mg/kg IEC 60666 not detectable not detectable
2-Furfural and related compounds content mg/kg IEC 61198 0.05 <0.05
3 - Performance
Oxidation stability at 120°C,164 h IEC 61125 C
Total acidity mg KOH/g 1.2 0.7
Sludge wt % 0.8 0.2
DDF at 90°C 0.500 0.130
4 - Health, safety and environment (HSE)
Flash point, PM °C ISO 2719 135 140
PCA wt % IP 346 3 <3
PCB mg/kg IEC 61619 not detectable not detectable

Distro DT-11 is an uninhibited insulating oil, meeting IEC 60296 Ed.4 (2012) General Severely Hydrotreated Insulating Oil
specifications, LCSET -20°C. This transformer oil is developed for distribution Issuing date: 2015-06-04
transformers, and should only be used in applications with a nominal voltage level less
than 72 kV.

You might also like