GOVERNMENT POLYTECHNIC, AMBAD.

DEPARTMENT OFELECTRICAL ENGINEERING

COURSE &CODE: ELECTRICAL MOTORS&
TRANSFORMERS/22418
ACADEMIC YEAR
- 2022-23

A MICRO-PROJECT ON

MINI DRILL MACHINE USING DC MOTOR

FOR THE AWARD OF

DIPLOMA IN ENGINEERING & TECHNOLOGY

(ELECTRICAL ENGINEERING
-EE4I)

SUBMITTED TO
Miss.T.D.Bombilwar Mam

SUBMITTED BY

215. Mohit VinodKavhale 2111620159

218. Nitin Ankush Mohite 2111620169
223. SandipDinaiek Rathod. 21116201
81
226. Shivam Haribhau Shinde 2111620190
227. AniketPrakash Sonune 2111620191

1
 GOVERNMENT POLYTECHNIC, AMBAD.
DEPARTMENT OF ELECTRICAL ENGINEERING
COURSE : ELECTRIC DC MOTOR

CERTIFICATE
This is to certify that the Micro-project entitled “ELECTRICAL DC MOTOR “
being submitted here with for the award of DIPLOMA IN ENGINEERING &
TECHNOLOGY in ELECTRICAL ENGINEERING of MAHARASHTRA STATE
BOARD & TECHNICAL EDUCATION (MSBTE) is the result of Micro-project
work completed by -under the supervision and guidance of
Miss.T.D.Bombilwar. It is to the best of my knowledge and belief that the
work embodied in this Micro-project has not formed earlier the basis for
the award of any degree or diploma of this or any other Board or examining
body.

ACADEMIC YEAR: 2022-23 SEMISTERE: EE4I

PLACE: AMBAD
Miss.T.D. Bombilwar Miss. T.D.Bombilwar DR A.M. AGARKAR

MICRO-PROJECT GUIDE H.O.D PRINCIPAL

DECLARATION.

2
I, the undersigned hereby declare that the project entitled “ELECTRICAL DC
MOTOR is written and submitted by me to Government Polytechnic
Ambad during Year 2022-23, Fourth Semester for partial fulfillment of the
‘Micro Project’ requirement of “ ELECTRICAL DC MOTOR “course under
Maharashtra State Board of Technical Education, Mumbai
curriculum, under the guidance of Miss.T.D.Bombilwar is my original work.
The empirical findings in this project are based on the collected data and
are not copied from any other sources.

ACKNOWLEDGEMENTS

I have great pleasure to express my immense gratitude towards a dynamic

person and my project guidance, Miss. T.D.Bombilwar. Department of ELECTRICAL
ENGINEERING Government Polytechnic, Ambad for giving me an opportunity to work
on an interesting topic over one semester. The work presented here could not have
been accomplished without his most competent and inspiring guidance, incessant
encouragement, constructive criticism and constant motivation during all phases of our
group Micro-project work. I am highly indebted to him.
I am very much thankful to Miss.T.D.Bombilwar Mam, Head Department of
ELECTRICAL ENGINEERING all HODs of various departments and PROF. DR. A.M.
AGARKAR SIR, the Principal of Government Polytechnic, Ambad for his encouragement
3
 and providing me a motivating environment and project facilities in the Institute to
carry out experiments and complete this Micro-project work.
I would like to extend my thanks to all our professors, staff members and all our
friends who extended their co-operation to complete the project.
I am indeed indebted to my parents and other family members for their
immense help at all levels with moral, social & financial support, care and support
throughout my studies without which my work would not have seen light of the day.
With warm regards,
Yours Sincerely,

Place: Ambad

PART A
TITLE OF MICRO-PROJECT:

MINI DRILL MACHINE USING DC MOTOR

AIM/BENEFITS OF MICRO PROJECT:

To study about the Different types of DC Motor

COURSE OUTCOME:
Design, construct and maintain

RESOURCES REQUIRED:
Sr Name of Resources Specification Quantity Remark
No.
1. Dc Motor RS 555,1200 RPM 01
4
 2. Adaptor 12v Dc,1.5A 01
3. Switch 1A 01
4. Socket Suitable 01
5. PVC Pipe 40mm 01ft.
6. Drill Chuckh Suitable 01
7. Drill Bit Suitable 01
8. Bun Cap PVC 40mm 02

1. INTRODUCTION
1. A drilling machine or drill is a power tool
which is used to make cylindrical holes in a
workpiece.
It removes the metal in the form of chips with the help
Of drill bits.
2. Drilling machine can be defined as a machine
which makes a circular hole in the job by
removing volume of the metal from it with the
help of a cutting tool called drill bit. When
drilling is performed by the drilling machine
the drill bit i.e. the cutting tool is rotated along
its own axis into the job. During this time the
job/work-piece is kept stationary.
Drilling is an operation of making a circular
hole by removing a volume of metal from the
job by cutting tool called drill. A drill is a
rotary end-cutting tool with one or more
cutting lips and usually one or more flutes for
the passage of chips and the admission of
cutting fluid.
5
 1. Types of Drilling Machine
These are the following types of Drilling
machines:- 1. Portable Drilling machine
2. Upright Drilling machine
3. Gang Drilling machine
4. Automatic Drilling machine
5. Sensitive Drilling machine
6. Radial Drilling machine
7. Multi Drilling machine
8. Deep hole Drilling machine

2. Parts of Drilling Machine

These are the following major parts of the Drilling
machine:-
Drilling Machine | Types, Parts, Operation & Tools

1.Head
2.Spindle
3.Drill chuck
4.Table
5.Base
6.Column

1. Head
It is mounted on the highest point of the segment and
houses the driving and encouraging component for the axle.
3. Spindle
This is taper shaft in circular shape which helps to hold the
drill chuck.
Its made up of high carbon chromium steel, stainless steel
or steel alloys.
6
They transfer the rotary motion from drill head to drill jigs.
It can move up and down with the help of rack and pinion
mechanism.
4. Drill chuck
It is generally self – centering which is made of special
alloy steel.
Its present on the lower end of the spindle.
5. Table
Its present on the column with T -slots for clamping the
work directly on its face.
They may be round or rectangular in shape.

6. Base
It is that part of a machine on which vertical column is
present.
Its support the column and worktable with other
attachments. It made up of casting.

7. Column
It is the vertical member of the machine that supports the
table and the head containing all the driving mechanism.
It may be made of box section or of round section.
Box column is more rigid unit.
In Box column type, the front face of the column is
accurately machine to form guideways on which the table
can slide up and down for vertical adjustment.
In the round segment rack teeth are cut on the essence of
the segment for vertical development of the arm and the
table.

7
8
Applications of Drilling Machine
It use in the field of industries purpose like manufacturing,
metalworking, etc,.
It use for producing holes like drilling, boring, etc,.
They also use in underground mining purpose.
Use for the purpose of under cutting.

Advantages of Drilling Machine

It requires less labor.
It gives high precision and accuracy.
No skill operators are required.
It consumes less floor area.
Disadvantages of Drilling Machine
It produces lots of torque at low speeds.
It is not suitable for small production methods.

Drilling Machine Disadvantages:

Limited size workpiece.

Rough hole.
Chipped cutting lips.
Oversized holes.
Breaking of drill.

9
10
11