Cladding

Design
Guide
About Parasoleil

Precision cut, hand-finished

artisan architectural panels

Parasoleil designs and manufactures an exceptional line of

laser-cut architectural metal panels with unique patterns that
offer a profoundly artistic aesthetic to any space. Engineered to
withstand the elements and manufactured in the United States,
these decorative panels provide a functional and durable design
that is warrantied to last. Parasoleil’s project guidance, proprietary
hardware and installation system, production dependability, and
beautiful powder coats ensure your project’s vision comes to life in
a memorable and lasting way.

Contact us to learn more

6510 W. 91st Avenue, Suite 100 /ParasoleilUSA

Westminster, CO 80031 /Parasoleil
Phone | (303) 327-9997 /ParasoleilUSA
Email | [email protected]
parasoleil.com

All Parasoleil patterns are protected under copyright law. Copying, modifying, or any unauthorized use of these patterns is strictly prohibited.
Assembly & System Options

PSO SYSTEM – TAMPER-RESISTANT

Parasoleil Stand Off (PSO) Series with
Tamper Resistant

Best Use:
Interior Wall Mounted Panels
Exterior Accent Panels
Smaller Panel Arrays
Backlighting Applications
High Visibility Ground Level

PSO SYSTEM – COUNTER-SUNK

Parasoleil Stand Off (PSO) Series with
Counter Sunk

Best Use:
Interior Wall Mounted Panels
Exterior Accent Panels
Smaller Panel Arrays
Backlighting Applications
High Visibility Ground Level

DIRECT MOUNT TUBE STEEL

Parasoleil Direct Hex (PDH) Series

Best Use:
High Design Load Conditions
Large Arrays of Panels
Façade remodels
Backlighting Large Scale
Full Wall Installations
Allows for approx. 8” space between
wall and panel

DIRECT MOUNT Z-GIRT

Parasoleil Direct Mount (PDS) Series

Best Use:
Façade New Construction
Large Exterior Panel Arrays
Installed Over Weatherproof and UV
Resistant Barrier
Integrated in Building Envelope

PARASO L EI L | CLADDING DESIGN GUIDE 3

Alternative Fastening Options

DIRECT MOUNT TO Z-GIRT BY OTHERS

Specification Considerations
A rainscreen system is part of the building envelope and
integrated into the façade design. Can be installed on
z-girts or similar cladding support systems. Should be used
in conjunction with UV resistant weather barriers due to
perforations in external panels. Direct mount installation
system suitable for high wind conditions. Fasteners to be
located at 8” o.c. Available with certified engineering package.
Physical testing has been completed for this assembly.
Factory cut predrilled holes for ease of installation. Contact
Parasoleil for engineering calculation submittal requirements

Choosing Panel Dimensions

Driven by building code requirements for panel deflection
and stress. Thickness and spans can be optimized to meet
engineering code requirements for max panel deflection
allowance and material stress. Pattern geometry impacts
engineering code compliance as well and is a factor in
maximum allowable spans for a given wind pressure.

Baseline recommendation for specifying

z-girt cladding system
16-gage galvanized steel Z-girts (by others) at 30” spans for
1/8”aluminum panel thickness. Generally appropriate for
common wind pressures in the continental U.S.

Installations Considerations
Z-girts (provided by others) to be cut to length in the field.
Parasoleil provides the panels and fasteners only. Fasteners
to be installed 8” o,c. in pre-drilled fastener holes provided by
Parasoleil and confirmed on shop drawings.

PARASO L EI L | CLADDING DESIGN GUIDE 4

Alternative Fastening Options (continued)

DIRECT MOUNT TO TUBE STEEL BY OTHERS

Specification Considerations
Simple and straight forward, this method requires a grid
of tube steel supports that design to receive the panels
via a facemounted application. The panels will come with
predrilled holes for ease of installation. Once the Grid has
been installed, the panels are easily applied and fastened to
the grid as an open-air metal panel skin.

Choosing Panel Dimensions

Driven by building code requirements for panel deflection
and stress. Thickness and spans can be optimized to
meet engineering code requirements for max panel
deflection allowance and material stress. Pattern geometry
impacts engineering code compliance as well and is a
factor in maximum allowable spans for a given wind
pressure. Generally, we recommend no more than 4’ wide
unsupported spans.

Baseline recommendation for specifying

tube steel mounting system
Tube purlins should be no less than 3” wide to allow for
2 panels to meet and be fastened to the same member.
Purlins can run horizontally or vertically. System must
be design and engineered by your engineer of record.
Parasoleil to provide span and pressure details to inform
the design.

Installations Considerations
Tube steel (by others) to be cut to length in the field.
Parasoleil provides the panels and fasteners only. Fasteners
to be installed 8” o,c. in pre-drilled fastener holes provided
by Parasoleil and confirmed on shop drawings.

PARASO L EI L | CLADDING DESIGN GUIDE 5

PSO Series Details

PARASOLEIL STAND OFF BRACKET (PSO) WITH TAMPER

Stand Off System | Front View RESISTANT HEX HEAD FASTENER SPECIFICATIONS
Scale 1:24 ƒ 1/8” A36 steel plate
4'-0"
O.C. post spacing ƒ Panels stand-off 2” from substrate
2.50 min. 4'-0"
2.50 min. ƒ Parasoleil Standard Graftone Powdercoat Finish – AAMA 2604
1 3'-0" 3'-11 7/8"
O.C. post spacing compliant
O.C. min.
2.50 post spacing 2.50 min.
3'-11 7/8" 6.00 typical ƒ Zinc Primer for maximum adhesion and corrosion resistance
1 2'-11 7/8" 4'-0" ƒ Floating self-clinching nut: .250 - 20 thread count
O.C. post spacing 6.00min.
typical
2.50 min.
3'-11 7/8" 24" max. ƒ Carbon steel, zinc plated
2.50
spacing ƒ 400 lb push out force
1
1 24" max.
spacing 6.0024" max.
typical
PARASOLEIL DIRECT HEX (PDH) SELF DRILLING SCREW
spacing
panel
3'-0" - 6'-0"
height SPECIFICATIONS
24" max.
varies 3'-0" - 6'-0" spacing ƒ #12-24 x 1-1/2” with #3 drill tip
ƒ 5/16” hex head and driver included
3'-0" - 6'-0" ƒ Carbon steel with dual corrosion resistant coatings
2 ƒ Bonded neoprene washer
ƒ Salt spray resistance: 1,000 hours per ASTM B117
2
ƒ Pull-out value: 2,100 lbs when installed in 3/16” steel
3
2
3
TAMPER RESISTANT BUTTON HEAD 5/32” HEX
3 3 HEAD FASTENER
2 ƒ ¼” – 20 x ¾” long
ƒ Fastener head to color coordinate with panel powdercoat finish

NOTE: posts, foundation, and anchor bolts provided by other suppliers

2.00
1/8" typical gap 2.00 2.00
.26 1/8"1/8" typical
typical gap gap
.26
.26
PSO-210 PSO-410 PSO-210
PSO-210
PSO-210 PSO-410
PSO-410
assembly PSO-210PSO-210
assembly assembly
assembly assembly
assembly
assembly assembly
assembly
PDH fastener
PDHPDH
fastener
fastener
PDH fastener
PDH fastener
PDH fastener (metal
(metal fastener)
fastener) PDH fastener
PDH fastener
(metal(metal
(metal (metal fastener) PDH fastener
(metal(metal
(metal
fastener)
fastener) fastener)
fastener)
fastener) fastener)
1/4" 1/4"
1/4" aluminum 1/4" aluminum aluminum1/4"
1/4" aluminum 1/4" aluminum
1/4" aluminum
1/4" aluminum
panel panel
panel panelaluminum
aluminum
panel panel
steel post panel panel
panel
steel post steel post
steel post
steel post
(by others) steel postpost
steel
(by others) steel post
steel
(by others) post
(by others)
(by others) (by others)
(by others) (by(by
others)
others)

1 (1 Panel) Detail
Scale 1:3 2 (2 Panel) Detail
Scale 1:3 3 Section Detail
Scale 1:3

PARASO L EI L | CLADDING DESIGN GUIDE 6

PSO Series Details

PARASOLEIL STAND OFF BRACKET (PSO) WITH COUNTER SUNK

Stand Off System | Front View PANEL HOLES AND BEVELED HEAD SCREW SPECIFICATIONS
Scale 1:24 ƒ 1/8” A36 steel plate
ƒ Panels stand-off 2” from substrate
ƒ Parasoleil Standard Graftone Powdercoat Finish – AAMA 2604
3'-0"
compliant
O.C. post spacing
ƒ Zinc Primer for maximum adhesion and corrosion resistance
2'-11 7/8"
ƒ Floating self-clinching nut: .250 - 20 thread count
ƒ Carbon steel, zinc plated
ƒ 400 lb push out force
1 24" max.
spacing
PARASOLEIL DIRECT HEX (PDH) SELF DRILLING SCREW
panel
height SPECIFICATIONS
varies ƒ #12-24 x 1-1/2” with #3 drill tip
ƒ 5/16” hex head and driver included
ƒ Carbon steel with dual corrosion resistant coatings
ƒ Bonded neoprene washer
ƒ Salt spray resistance: 1,000 hours per ASTM B117
ƒ Pull-out value: 2,100 lbs when installed in 3/16” steel

FLAT HEAD PHILIPS SCREW – FLUSH MOUNT

3 ƒ ¼” – 20 x ¾” long – 100° bevel
2 ƒ Machine drilled bevel for each fastener hole in panel (1/8”
minimum panel thickness)
ƒ Fastener head to color coordinate with panel powdercoat finish

NOTE: posts, foundation, and anchor bolts provided by other suppliers

1 STEEL STRUCTURAL SUPPORT MEMBER

PARASOLEIL PANEL WITH

FACTORY CUT FASTENER HOLES
1 Panel (SEE SPECIFICATIONS FOR MATERIAL
Detail 2.15
1.50 SIZE AND THICKNESS)
Scale 1:3

PARASOLEIL PSO-110 SERIES

ELEVATION VIEW INSTALLATION HARDWARE.
INSTALL PER MANUFACTURER'S
GUIDELINES

PARASOLEIL PANEL WITH

FACTORY CUT FASTENER HOLES
(SEE SPECIFICATIONS FOR MATERIAL 3D VIEW
SIZE AND THICKNESS)

FASTEN INSTALLATION HARDWARE USING

PARASOLEIL PD-SERIES DRILL SCREWS

SECTION VIEW STEEL STRUCTURAL SUPPORT MEMBER

PARASOLEIL STAND-OFF, PSO-110 FMP DETAIL

1.64 STEEL STRUCTURAL SUPPORT MEMBER 1.64 STEE

PARASOLEIL PANEL WITH PAR

FACTORY CUT FASTENER HOLES FAC
PARASO L EI L | CLADDING DESIGN GUIDE 7
(SEE SPECIFICATIONS FOR MATERIAL (SEE
2.75 SIZE AND THICKNESS) 2.75 SIZE
 PARASOLEIL PANEL WITH
FACTORY CUT FASTENER HOLES
(SEE SPECIFICATIONS FOR MATERIAL 3D VIEW
SIZE AND THICKNESS)

PSO Series Details (Continued) FASTEN INSTALLATION HARDWARE USING

PARASOLEIL PD-SERIES DRILL SCREWS

SECTION VIEW STEEL STRUCTURAL SUPPORT MEMBER

PARASOLEIL STAND-OFF, PSO-110 FMP DETAIL

2 1.64 STEEL STRUCTURAL SUPPORT MEMBER 1.64

PARASOLEIL PANEL WITH

(2 Panels) FACTORY CUT FASTENER HOLES
Detail (SEE SPECIFICATIONS FOR MATERIAL
Scale 1:3 SIZE AND THICKNESS) 2.75
2.75

PARASOLEIL PSO-210 SERIES

ELEVATION VIEW ELEVATION VIEW
INSTALLATION HARDWARE.
INSTALL PER MANUFACTURER'S
GUIDELINES

PARASOLEIL PANEL WITH

FACTORY CUT FASTENER HOLES 3D VIEW
(SEE SPECIFICATIONS FOR MATERIAL
SIZE AND THICKNESS)

FASTEN INSTALLATION HARDWARE USING

PARASOLEIL PD-SERIES DRILL SCREWS
SECTION VIEW STEEL STRUCTURAL SUPPORT MEMBER SECTION VIEW

PARASOLEIL STAND-OFF, PSO-210 FMP DETAIL, PARASOLEIL

SINGLE PANEL EDGE CONDITION 2 PANEL ED

3 2.75
STEEL STRUCTURAL SUPPORT MEMBER
2.75

Section PARASOLEIL PANEL WITH

FACTORY CUT FASTENER HOLES
Detail (SEE SPECIFICATIONS FOR MATERIAL
Scale 1:3 SIZE AND THICKNESS) 2.75
2.75

PARASOLEIL PSO-410 SERIES

ELEVATION VIEW ELEVATION VIEW
INSTALLATION HARDWARE.
INSTALL PER MANUFACTURER'S
GUIDELINES

PARASOLEIL PANEL WITH

FACTORY CUT FASTENER HOLES
(SEE SPECIFICATIONS FOR MATERIAL
SIZE AND THICKNESS) 3D VIEW

FASTEN INSTALLATION HARDWARE USING

PARASOLEIL PD-SERIES DRILL SCREWS

SECTION VIEW STEEL STRUCTURAL SUPPORT MEMBER SECTION VIEW

PARASOLEIL STAND-OFF, PSO-410 FMP DETAIL, PARASOLEIL STA

2 PANEL CONDITION 4 PANEL COND

PARASO L EI L | CLADDING DESIGN GUIDE 8

PSO Series Installation Guidance

PARTS LISTING: TOOLS NEEDED

ƒ Measuring tape
ƒ Marking pencil
PSO-110
ƒ Conventional drill with 5/16” and 7/16” drivers
Corners of panel array

PREPARATION
Confirm adequate blocking or structure is present within
wall at center anchor mounting locations.
PSO-210
Perimeter of panel array
FIELD NOTES
Contact Parasoleil for installation questions, especially for
high wind or snow load conditions.
PSO-410
See Parasoleil’s warranty document for warranty coverage.
Interior at panel seams
Field drilling Parasoleil panels is allowed under warranty,
however, field cutting panels is not recommended and will
TAMPER-RESISTANT void manufacturer’s warranty. If an alternate panel size is
& FLAT HEAD SCREW needed, contact Parasoleil for assistance.
Bracket center anchor

Figure 1: Typical Hardware Layout

PSO-110
Installation
Hardware

PSO-210
Installation
Hardware

PSO-410
Installation
Hardware

PARASO L EI L | CLADDING DESIGN GUIDE 9

PSO Series Installation Guidance (continued)

Beginning with the first panel as

shown in Figure 1, attach PSO-
Series hardware to panels with
provided fastener.

Position the first panel assembly to the post

and confirm location, alignment and adequate
mounting structure or blocking at mounting
locations. Install assembly with PSO center
anchors using 5/16” driver.

Repeat Step 1 for the next panel and position on post

using shared hardware points on Panel 1 as shown.

Confirm alignments and blocking and install second

assembly using PSO center anchors with 5/16” driver.

Repeat steps 1–3 for remaining panels.

PARASO L EI L | CLADDING DESIGN GUIDE 10

Spec Guidance & Engineering

PANEL SPANS
Recommended panel thicknesses for certain widths using our Panel
Thickness Callibrator to find the more appropriate dimensions.

PANEL SPAN / THICKNESS EXAMPLE TABLE

THICKNESS WEIGHT* SPAN BETWEEN SUPPORTS**

1/8” 1.8 lbs/sf 24-36”
3/16” 2.6 lbs/sf 30-48”
1/4” 3.5 lbs/sf 36-52”

* Subtract pattern open % for final weight.

** General guideline only, please ask Parasoleil for project specific design assistance.

WINDLOADS CONSIDERATIONS
Parasoleil provides engineering for building cladding
components including our perforated panels, using a
calculated design pressure based on key factors such as
area wind speed, application height above the ground,
project Risk Category, and Site Exposure Category.

Using conventional structural calculations as well as our

sophisticated Finite Element Analysis modeling soft-
ware, this project specific design pressure is then ap-
plied to the cladding system components to determine
their deflection and material stress values as compared
to Building code requirements.
Credit: ASCE 7-16 Risk Category II Basic Wind Speed Map

SPECIFICATION PROCESS
1. Determining exact details to meet project design
load requirements.
2. Full specifiable cladding systems for ease of pro-
curement and installation by one substrade.
3. Proprietary patterns and hardware systems for
confidence in locking the specification.

PARASO L EI L | CLADDING DESIGN GUIDE 11

PSO Series Installation Hardware

Parasoleil’s standard offset hardware combines beauty,

utility, and durability to offer an elegant installation
solution for a wide range of vertically mounted
applications. With subtly expressed the fasteners in a
face-mounted assembly, this system standardizes the
installation process, increases corrosion-resistant and
enhances the overall aesthetic of the installation.

Tamper-resistant fasteners are recommended for high traffic,

public areas while the flush mount fastener option is an excellent
alternative for zero-profile facemounted applications.

BENEFITS & FEATURES

• Universal design for attachment of aluminum panels up to ¼”
thick (US Patent Pending)
• Easy three-step installation
• Universal factory cut fastener holes in panels ensure consistent
fastening point and panel spacing
• Adjustable for inconsistent field conditions
• Attaches to most substrates (steel, concrete, wood, aluminum,
masonry)
• Suitable for interior and exterior applications
• Easy removal and replacement as needed

SPECIFICATIONS
• 1/8” A36 steel plate
• Panels stand-off 2” from substrate
• Parasoleil Standard Graftone
Powdercoat Finish – AAMA 2604
compliant
• Zinc Primer for maximum adhesion
and corrosion resistance
• Floating self-clinching nut: .250 - 20
thread count
• Carbon steel, zinc plated
• 400 lb push out force

PARASO L EI L | CLADDING DESIGN GUIDE 12

PSO Series Installation Hardware (continued)
FASTENER OPTIONS
1. Tamper Resistant Button Head 5/32” Hex
Head Fastener
a. ¼” – 20 x ¾” long
b. Fastener head to color coordinate with
panel powdercoat finish

2. Flat Head Philips screw – Flush Mount

a. ¼” – 20 x ¾” long – 100° bevel
b. Machine drilled bevel for each fastener hole
in panel (1/8” minimum panel thickness)
c. Fastener head to color coordinate with
panel powdercoat finish

STRUCTURAL RECOMMENDATIONS
• 24” on center max. recommended bracket spacing along panel
edges
• High wind conditions require additional support and/or thicker
brackets
• Contact local building department for the most accurate wind load
information for your area

QUESTIONS?
Contact Parasoleil for complete specifications, installation requirements
and warranty coverage.

PARASO L EI L | CLADDING DESIGN GUIDE 13

Direct Mount Fastener Hardware

Parasoleil offers a number of different screws that are

hand selected to fit your project needs. All screws come
pre-painted in the color that best coordinates with the
panel powdercoat finish. Drivers are included in all screw
orders.

PDH PDS

SCREW MATERIAL Carbon Steel Stainless Steel

SCREW SPEC #12 #12

24 x 1” 14 x 1-1/4"

SUBSTRUCTURE up to 3/8” up to 1/8” light

MATERIAL structural steel gage steel

SCREW TIP #3 Drill Tip #3 Drill Tip

Self Tapping Self Tapping

DRIVE 5/16” Hex Proprietary Driver

PULL-OUT VALUE 1,678 lbs 1,282 lbs

PAINTED HEAD Yes Yes

QUESTIONS?
Contact Parasoleil for complete specifications, installation requirements
and warranty coverage.

PARASO L EI L | CLADDING DESIGN GUIDE 14

PDH Fastener Hardware

SELF DRILLING SCREWS FOR STEEL SUPPORTS

Parasoleil aluminum panels may be installed directly onto structural
steel supports using our PDH drill screw. Factory cut fastener holes
in panels are available upon request. For steel thickness no more
than 3/8”, pilot holes are recommended.

PDH DRILL SCREWS

For installing Parasoleil
aluminum panels and
hardware to structural
steel up to 3/8” thick and
include neoprene washer
for maximum corrosion
protection.

INSTALLATION GUIDELINES
• Allow for 1/8” gap between panels for expansion and contraction
of the metal due to temperature variations
• Fastener spacing 8” on center maximum at all support locations
for engineered applications
• Adjust torque settings as needed to avoid overtightening which
may cause fastener twist offs

PDH DRILL SCREWS SPECIFICATIONS

• #12 - 24 x 1” with #3 drill tip
• 5/16” hex head & driver included
• Carbon steel with dual corrosion resistant coatings
• Bonded neoprene washer
• Salt spray resistance: 1,000 hours per ASTM B117
• Pull-out value: 1,678 lbs when installed in 1/8” substructure

QUESTIONS?
Contact Parasoleil for complete specifications, installation requirements
and warranty coverage.

PARASO L EI L | CLADDING DESIGN GUIDE 15

PDS Fastener Hardware

SELF DRILLING SCREWS FOR STEEL SUPPORTS

Parasoleil aluminum panels may be installed directly onto finished
light gauge steel supports using our PDS drill screw. Factory cut
fastener holes in panels are available upon request. Tamper
resistant proprietary head offers a clean aesthetic for a higher level
of finish.

PDS DRILL SCREWS

For installing Parasoleil
aluminum panels to light
gauge steel up to 1/8”
thick, or aluminum support
structure for design
conscious applications and
include neoprene washer
for maximum corrosion
protection.

INSTALLATION GUIDELINES
• Allow for 1/8” gap between panels for expansion and contraction
of the metal due to temperature variations
• Fastener spacing 8” on center maximum at all support locations
for engineered applications
• Adjust torque settings as needed to avoid overtightening which
may cause fastener twist offs

PDS DRILL SCREWS SPECIFICATIONS

• #12 - 14 x 1-1/4” with #3 drill tip
• ½” Outside Diameter low profile head
• 300 series stainless steel head & shank
• Bonded neoprene washer
• Tamper resistance fastener head with no accessible driver access
• Provided drive socket ensures positive engagement and prevents
damage to painted fastener head
• Pull-out value: 1,282 lbs when installed in 1/8” substructure

QUESTIONS?
Contact Parasoleil for complete specifications, installation requirements
and warranty coverage.

PARASO L EI L | CLADDING DESIGN GUIDE 16

Aluminum Panel Material and Thickness

Parasoleil offers decorative laser cut aluminum

panels in several standard thicknesses. We
offer detailed project specific design assistance
to ensure the most appropriate thickness is
specified based on the amount of panel.

PANEL THICKNESS SELECTION FACTORS

• Application type
• Panel span between supports
• Project engineering design pressure
• Documented code compliance requirements
• Fastening method

1/8” THICK ALUMINUM PANELS

• Generally recommended span: 24-36”
PANEL SPAN / THICKNESS EXAMPLE TABLE
• Durable plus light weight for ease of installation
SPAN BETWEEN • Commonly used for:
THICKNESS WEIGHT* SUPPORTS**
- Residential & commercial shade structures
1/8” 1.8 lbs/sf 24-36” - Commercial ceilings
3/16” 2.6 lbs/sf 30-48” - Commercial cladding with mid-panel support
1/4” 3.5 lbs/sf 36-52”
3/16” THICK ALUMINUM PANELS
* Subtract pattern open % for final weight.
• Generally recommended span: 30-48”
** General guideline only, please ask Parasoleil for further design assistance.
• Good span capability with visual weight for brand
conscious eye-level applications and wider clear span
over-head applications
Allowable deflection represents the maximum deflection
allowed by International Building Code (IBC) L/60. • Commonly used for:
- commercial wider span shade structures
Notes: Values above are for general reference only and may - Commercial wider span cladding
not be recommended for your specific project requirements. - Commercial screens

Values above are based on:

1/4” THICK ALUMINUM PANELS
• Exposure B, Risk Factor IV
• Lemon Drop as baseline pattern • Generally recommended span: 36-52”
• PBI installation hardware • Good span capability with visual weight for brand
conscious eye-level applications and wider clear span
Contact Parasoleil for recommendations for high wind over-head applications
pressure conditions not shown above or for your specific
• Commonly used for:
project.
- commercial wider span shade structures
- Commercial wider span cladding
- Commercial screens

PARASO L EI L | CLADDING DESIGN GUIDE 17

Powdercoat Finishes for Aluminum

Parasoleil’s award-winning proprietary

powdercoat finishes for aluminum are specifically
developed for their versatility, durability, and
Antique Gold Black Licorice
beauty to match the timeless qualities of our
architectural panels.

Buffalo Dime Burgundy BENEFITS & FEATURES

• 10-year finish warranty for UV performance and
adhesion to base metal
• Quality gloss and color retention
• Finished on both sides for maximum versatility
Copper Foil Buff Stone
• UV stable, no VOCs, and exterior grade

PROPRIETARY FINISHES
• Quality Standards: Consistent in color and texture,
Pike’s Peak Umbria these finishes are versatile.
• Patinas: With a varied aesthetic, these finishes have
unique markings, tones and qualities based on aged
metals.

WARRANTY FOR STANDARD FINISH

All standard finishes are protected by are protected by
Patina Finishes a 10-year warranty against cracking and peeling under
normal conditions. Panels with sustained exposure to
corrosive environments such as chlorinated or non-potable
water (irrigation systems & swimming pools), saltwater,
Liberty Vertigris Deep Bronze and industrial chemicals, as well as panels that have been
modified in the field (cutting, bending, etc.) are not covered.

CUSTOM FINISH
Custom panel finishes for aluminum are available for
COR-11 Native Turquoise
specified powders. A color matching process is not offered.
All custom finishes are subject to approval by Parasoleil and
are not covered by Parasoleil’s standard finish warranty.

Galvanate Aged Bronze

QUESTIONS?
Contact Parasoleil for complete specifications, installation
requirements, and warranty coverage.

All Parasoleil patterns are protected under copyright © law. Copying, modifying, or
Industry Moneypenny any unauthorized use of these patterns is strictly prohibited.

PARASO L EI L | CLADDING DESIGN GUIDE 18

Engineering Education

At Parasoleil, we focus on engineering standards and

certifications for our products because we understand
the importance of design load compliance. As a result, we
have refined our approach to our panel performance in
any thickness, pattern, and application.

ENGINEERING AND LOAD TESTING PROCESS

ƒ Finite Element Analysis through computer models to

understand a patterned panel’s deflection
ƒ Extensive product testing
ƒ Code analysis
ƒ Annual inspection for certification

WHY IT MATTERS

Panels Attached to a Building

Pre-engineered patterns ensure IAPMO-ES 0488 certification is
included in the square foot price. Project-specific engineering reports
can be created to provide the most accurate analysis that lowers risk
and cost for the GC. If additional documentation is required, such
as a California DSA or NOA for Miami-Dade county, Parasoleil can
provide applied engineering reports to satisfy documentation
requirements.

Panels at Ground Level Exterior

Parasoleil’s pre-engineered systems prevent building department
slow downs and provides instant design flexibility without requiring a
change order.

Panels in Interior Applications

Though decorative panels do not require wind or snow load
engineering, they should look flat, be safe, and be designed to
fit together for easy installation. Parasoleil’s engineered systems
and dependable process ensureson-time production and expert
guidance.

PARASO L EI L | CLADDING DESIGN GUIDE 19

Engineering Education (continued)

PROVIDED SERVICES

Below are the following engineering services offered by Parasoleil to ensure your project, standard or custom, is
fully supported by our team.

Parasoleil Engineering Services

Panel Thickness Calibrator 

Product Certification (IAMPO - ES 0488) 
Custom Pattern FEA 
Panel FEA - Engineering Report Flat Fee

PE Stamp Flat Fee

Structure FEA - with Design Iterations Priced Per Project

HOW PARASOLEIL CAN HELP YOU

Use Parasoleil’s expert engineering guidance or certified

project reports depending on your project type.

When you engage with Parasoleil from the start, you will:

• Reduce overall cost

• Raise confidence
• Ensure you cruise through permitting
• Reduce your risk as a specifier
• Set up a smooth installation

If your project requires engineering, know that our

product certification exceeds International Building Code
requirements.

QUESTIONS?
Contact Parasoleil for complete specifications, installation
requirements and warranty coverage.

PARASO L EI L | CLADDING DESIGN GUIDE 20

Contact Parasoleil for complete
specifications, installation requirements
and warranty coverage.

All Parasoleil patterns are protected

under copyright law. Copying,
modifying, or any unauthorized use of
these patterns is strictly prohibited.

We look forward to hearing from you.

6510 W. 91st Avenue, Suite 100 /ParasoleilUSA

Westminster, CO 80031 /Parasoleil
Phone | (303) 327-9997 /ParasoleilUSA
Email | [email protected]
parasoleil.com