2017 Biodata Resume CV Engineering Professional Abdulazeez Abdulraheem
2017 Biodata Resume CV Engineering Professional Abdulazeez Abdulraheem
CURRICULUM VITAE
of
DR. ABDULAZEEZ ABDULRAHEEM
Associate Professor, King Fahd University of Petroleum and Minerals,
Dhahran, Saudi Arabia
ResearcherID: S-5961-2017
1
CURRICULUM VITAE
of
DR. ABDULAZEEZ ABDULRAHEEM
Associate Professor
Department of Petroleum Engineering
King Fahd University of Petroleum and Minerals (KFUPM)
P.O. Box: 1105, Dhahran 31261, Kingdom of Saudi Arabia
Email: [email protected]
Tel: 00-966-3-860-2604 (office)
1. PERSONAL BACKGROUND
1.1 PERSONAL
1.2 EDUCATION
Dissertation Topic:
Constitutive Modeling and Numerical Simulation of Compacting Reservoir Rocks.
Thesis Topic:
Dynamic Analysis of Electric Circuit Breakers Subjected to Earthquake
Ground Motions.
2
1.3 PROFESSIONAL RECORD
2/11 till Prsnt: Associate Professor, Dept. of Petroleum Engineering, KFUPM, Saudi Arabia
8/01 to 2/11: Research Engineer-II, Center for Petroleum and Minerals, Research Institute,
KFUPM, Saudi Arabia
1/94 to 8/01: Research Engineer-III, Center for Petroleum and Minerals, Research Institute,
KFUPM, Saudi Arabia
8/90 to 1/94: Graduate Research Assistant: University of Oklahoma, Norman, OK, USA.
Responsibilities included:
Laboratory testing on soil and rock samples (Preparation of specimens;
Porosity and permeability measurements; Acoustic P-wave measurements;
Tests along different stress paths on Cubical and Triaxial Cells).
Analysis of laboratory and field data
Development of new laboratory techniques
Development of constitutive models
Development of numerical simulators
Report writing
8/89 to 5/90: Graduate Teaching Assistant: University of Oklahoma, Norman, OK, USA
Responsibilities included:
Conducting Tutorials for "Mechanics of Materials"
Conducting Laboratory Sessions for "Soil Mechanics"
8/87 to 8/89: Lecturer, Dept. of Civil Engineering, KFUPM, Dhahran, Saudi Arabia
Responsibilities included:
Taught a course on "Engineering Graphics" for seven semesters.
Responsibilities included:
Conducting Tutorial Sessions on "Engineering Statics"
Conducting Tutorial Sessions on "Mechanics of Materials"
3
2. R & D ACCOMPLISHMENTS
Journal Papers:
3. Abdulraheem, A., M. Zaman, and J.-C. Roegiers (1993). A Finite Element Model for
Ekofisk Field Subsidence, Journal of Petroleum Science and Engineering, Vol. 19,
pp. 299-310.
5. Hassan, H.M., Korvin, G., and A. Abdulraheem (2001). Fractal and Genetic Aspects
of Khuff Reservoir Stylolites, Eastern Saudi Arabia. Arabian Journal of Science and
Engineering Journal. 27(2001): 29-56.
4
12. Khoukhi, A., M. Oloso, M. Elshafei, A. Abdulraheem, and A. Al-Majed (2011).
Support Vector Regression and Functional networks for Viscosity and Gas/Oil Ratio
Curves Estimation. International Journal of Computational Intelligence and
Applications. Vol. 10, No. 3. Sep. 2011. Pp 269-293.
13. Olatunji, S.O., A. Selamat, A. Abdulraheem (2011). Predicting correlations properties
of crude oil systems using type-2 fuzzy logic systems. Expert Systems with
Applications. Volume 38, Issue 9, September 2011, Pages 10911-10922.
14. M.A. Al-Marhoun, S. Nizamuddin, A.A. Abdul Raheem, S. Shujath Ali, A.A.
Muhammadain. (2012). Prediction of crude oil viscosity curve using artificial
intelligence techniques. Journal of Petroleum Science and Engineering 86-87 (2012)
111–117.
15. Khokhar, Z.H., M.A., Al-Harthi, and A. Abdurraheem (2012). Investigations of
Biosorption Capacity Histories with Temperature and Other Parameters in a Given
Fuzzy Universe of Discourse,” International Journal of Modeling and Optimization,
Vol. 2, No. 3, June 2012. Pp 222—226.
16. Emad A. El-Sebakhy E.A., O. Asparouhov, A. Abdulraheem, A. Al-Majed, D. Wu, K.
Latinski, I Raharja. (2012). Functional networks as a new data mining predictive
paradigm to predict permeability in a carbonate reservoir. Expert Systems with
Applications 39 (2012) 10359–10375.
17. A. Selamat, S. O. Olatunji, and A. Abdulraheem (2012). A Hybrid Model through the
Fusion of Type-2 Fuzzy Logic Systems and Sensitivity-Based Linear Learning Method
for Modeling PVT Properties of Crude Oil Systems. Advances in Fuzzy Systems, vol.
2012, Article ID 359429, 19 pages, 2012. doi:10.1155/2012/359429.
5
Reservoir Properties Prediction”, Neural Computing and Applications, Vol. 23, Suppl
1. Pp. 179-180. DOI 10.1007/s00521-012-1298-2, 2013.
24. Ali, S.S., S. Nizamuddin, A. Abdulraheem, M. R. Hassan, M. E. Hossain. (2013).
Hydraulic unit prediction using support vector machine, Journal of Petroleum Science
and Engineering Volume 110, Pages 243-252.
25. Olatunjia, S.O., A. Selamata, A. Abdulraheem. (2014). Improved sensitivity based
linear learning method for permeability prediction of carbonate reservoir using
interval type-2 fuzzy logic system. Applied Soft Computing. Volume 14, Part B,
January 2014, Pages 144–155.
26. Olatunji, S.O., A. Selamat, A. Abdulraheem. (2014). A Hybrid Model through the
Fusion of Type-2 Fuzzy Logic Systems and Extreme Learning Machines for
Modeling Permeability Prediction. Information Fusion: An International Journal on
Multi-Sensor, Multi-Source Information Fusion, An Elsevier Publication. Vol. 16. Pp.
29-45.
27. Al-Marhoun, M. A., S. S. Ali, A. Abdulraheem, S. Nizamuddin, A. Muhammadain
(2014) Prediction of bubble point pressure from composition of black oils using
artificial neural network, Petroleum Science and Technology, 32:14, 1720-1728.
28. Anifowose, F., J. Labadin and A. Abdulraheem (2014). Non-Linear Feature
Selection-Based Hybrid Computational Intelligence Models for Improved Natural Gas
Reservoir Characterization,” Journal of Natural Gas Science and Engineering, 21
(2014) pp. 397-410.
29. Nooruddin, H., F. Anifowose and A. Abdulraheem (2014), "Using Soft Computing
Techniques to Predict Corrected Air Permeability using Thomeer Parameters, Air
Porosity and Grain Density”, Computers and Geosciences, Volume 64, pp. 72-80
(2014).
30. F. Anifowose, S. Adeniye and A. Abdulraheem (2014), "Recent advances in the
application of computational intelligence techniques in oil and gas reservoir
characterization: a comparative study”, Journal of Experimental & Theoretical
Artificial Intelligence, 2014. doi = 10.1080/0952813X.2014.924577.
6
carbonate rocks. Case study: Arab-D Reservoir outcrop approach, Central Saudi
Arabia. Arabian Journal of Geosciences. DOI 10.1007/s12517-015-1957-6.
35. Bageri, B.S., M. Mahmoud, S.H. Al-Mutairi, and A. Abdulraheem (2015). Effect of
Sand Content on the Filter Cake Properties and Removal during Drilling MRC wells
in Sandstone. Journal of Energy Resources Technology. doi:10.1115/1.4032121
37. Adebayo, A. R., A. Abdulraheem, S.O. Olatunji. (2015). Artificial Intelligence Based
Estimation of Water Saturation in Complex Reservoir Systems. Journal of Porous
Media. DOI: 10.1615/JPorMedia.v18.i9.60. pp. 893-906. November 2015.
39. Akande, K., T. O. Owolabi, S.O. Olatunji and A Abdulraheem (2016). A Novel
Homogenous Hybridization Scheme for Performance Improvement of Support Vector
Machines Regression in Reservoir Characterization," Applied Computational
Intelligence and Soft Computing, Article ID 2580169, 10 pages, 2016.
doi:10.1155/2016/2580169. Apr. 2016.
40. Anifowose, F., A. Khoukhi, and A. Abdulraheem (2016). "Investigating the Effect of
Training-Testing Data Stratification on the Performance of Soft Computing
Techniques: An Experimental Study. Journal of Experimental & Theoretical
Artificial Intelligence. June 2016.
43. Mahmoud, M.A., Ba Geri, B.S., Elkatatny, S., and Al-Mutairi, S.H., 2016. Modeling
of Filter Cake Composition in Maximum Reservoir Contact and Extended Reach
Horizontal Wells. Accepted, Journal of Energy Resources Technology, JERT-16-
1117, Transaction of ASME. (Impact factor 2.0, Q2 ranked journal).
44. Ba Geri, B.S., Mahmoud, M.A., Shawabkeh, R.A., and Abdulraheem, A., 2016.
Evaluation of Barium Sulfate (Barite) Solubility Using Different Chelating Agents –
7
Different Bases - at High Temperature. Accepted, Petroleum Science and
Technology, PST-1509-1292. (Impact factor 0.9, Q3 ranked journal).
45. Ba Geri, B.S., Mahmoud, M.A., Abdulraheem, A, Al-Mutairi, S.H. and Shawabkeh,
R.A., 2016. Single Stage Filter Cake Removal of Barite Weighted Water Based
Drilling Fluid. Accepted, Journal of Petroleum Science and Engineering, PETROL
7690. (Impact factor 1.7, Q2 ranked journal).
46. Ba Geri, B. S., Mahmoud, M. A., and Elkatatny, S., 2016. Impact of Sand Content on
Filter Cake and Invert Emulsion Drilling Fluid Properties in Extended Reach
Horizontal Wells. Accepted, International Journal of Oil, Gas, and Coal Technology,
IJOGCT 132764. (Impact factor 0.7, Q2 ranked journal).
47. Rammay, M.H., A. Abdulraheem (2016). PVT Correlations for Pakistani crude oils
Using Artificial Neural Network. Journal of Petroleum Production Technology. Feb.
2016. DOI 10.1007/s13202-016-0232-z.
52. Elkatatny, S., Mahmoud, M., Z. Tariq, A. Abdulraheem.(2017) New insights into the
prediction of heterogeneous carbonate reservoir permeability from well logs using
artificial intelligence network. Neural Computing & Applications (2017).
doi:10.1007/s00521-017-2850-x. Online on Jan, 2017.
8
55. Bageri, B., Mahmoud, M.A., Abdulraheem, A., Al-Mutairi, S.H., Elkatatny, S.M.,
Shawabkeh, R.A. 2017. Single Stage Filter Cake Removal of Barite Weighted Water
Based Drilling Fluid”, Journal of Petroleum Science and Engineering. 149(20): 476–
484. Jan 2017.
56. Abdulhameed, A., Elkatatny, S.M., Mahmoud, M.A., Aburesh, M., Abdulraheem,
A., and Ali, A. 2017. Determination of the total organic carbon (TOC) based on
conventional well logs using artificial neural network. International Journal of Coal
Geology, 179(15 June): pp. 72-80.
57. Ba geri, B., M. Mahmoud, R. Shawabkeh, S. Al-Mutairi, and A. Abdulraheem (2017).
Toward a Complete Removal of Barite (Barium Sulfate BaSO4) Scale Using
Chelating Agents and Catalysts. Arabian Journal for Science and Engineering. 42.
10.1007/s13369-017-2417-2. April 2017, Volume 42, Issue 4, pp 1667–1674.
9
Multidisciplinary Science, J.-C. Roegiers, ed., Proc., 32nd US Symposium on Rock
Mechanics, pp. 531-538, July 10-12.
5. Abdulraheem, A., M. Zaman, and J.-C. Roegiers (1993). A FE Model for Ekofisk
Field Subsidence. Presented at the Energy Technology Conference and Exposition
held in Houston, TX, Composite Material Technology 1993, PD-Vol. 45, Editors:
Hui, D., Kozik, T.J., Ochoa, O.O., pp. 103-110.
9. Abdulraheem, A., M. Zaman, and J.-C. Roegiers (1995). End effects and Dilatancy
in Rock Compression Testing. Proc., The Fourth Saudi Engineering Conference,
Nov. 5-8, Vol. 2, pp. 263-269.
10. Abdulraheem, A., M.R. Awal, and S. Taher (1997). A New Numerical Simulation
Model and Upscaling Technique for Scaled Model Sand Production. Proc., 10th
Middle East Oil Show & Conference, 15-18th March, Bahrain, Vol. 2, pp. 99-109.
12. Korvin, G., H.M. Hassan, N.I. Khondakar and A. Abdulraheem (1998). Stylolites.
5th Meeting of the Saudi Society for Earth Sciences, Dhahran, KSA.
10
15. Mohiuddin, M.A., G. Korvin, A. Abdulraheem, M.R.Awal, K. Khan, and M.S.
Khan (2000). From Rock Physics to Rock Texture: A case study of Saudi Arabian
reservoir rocks. Paper presented at GEO 2000: 4th Middle Geosciences Conference
and Exhibition, March 27-29, Bahrain.
21. Al-Shayea, N.A., K. Khan, and A. Abdulraheem (2001). Fracture Toughness vs.
Tensile Strength for Reservoir Rocks from Saudi Arabia. The 2001 ISRM
sponsored international symposium - 2nd Asian rock mechanics symposium Sept 11-
14, 2001, Beijing, China.
22. Korvin, G., Mohiuddin, M.A., A. Abdulraheem (2001). Changes in the Fractal
Dimension of the Pore Surface of Sedimentary Rocks under Pressure. Presented at
the First Saudi Science Conference, April 2000 at KFUPM, Dhahran, Saudi Arabia.
11
25. M. A. Mohiuddin, A. Abdulraheem, D. Al-Qudaihy, M. R. Awal, and K. Khan.
(2003). Wellbore Instability in a Saudi Arabian Sandstone Reservoir: Causes and
Solutions. Paper No. U379. Presented at 5th International Petroleum Conference
and Exhibition. New Delhi, India. Jan 9-12, 2003.
12
35. Anifowose, F. and A. Abdulraheem (2010). Prediction of Porosity and
Permeability of Oil and Gas Reservoirs Using Hybrid Computational Intelligence
Models. Presented at SPE North Africa Technical Conference and Exhibition,
Cairo, Egypt. Feb 14-17, 2010.
38. Khokar, Z.H, S.Z. Shuja, and A. Abdulraheem (2010). An Artificial Intelligence
Approach to Investigate Hot and Cold Fluid in Pipelines Scale Up. Symposium on
Industrial Systems and Control. May 10-11, 2010. Dhahran, Saudi Arabia.
44. Anifowose, F. and A. AbdulRaheem (2010). “How Small is a “Small” Data”. 2nd
Saudi Conference on Oil and Gas Exploration and Production Technologies (OGEP
2010), Dhahran, Saudi Arabia, 18-20 December, 2010. (Ref: Fatai-Azeez-OGEP).
13
45. Anifowose, F. and A. AbdulRaheem (2010). “'A Functional Networks-Type-2
Fuzzy Logic Hybrid Model for the Prediction of Porosity and Permeability of Oil
and Gas Reservoirs”. Paper #1569334237, 2nd International Conference on
Computational Intelligence, Modeling and Simulation (CIMSim 2010), Bali,
September 28 - 30, 2010. (Ref: Fatai-Azeez-CIMSim).
46. Sunday Olusanya Olatunji, Ali Selamat and A. Abdulraheem (2010). “Modeling
PVT Properties of Crude Oil Systems Using Type-2 Fuzzy Logic Systems”,
International conference on computational collective intelligence (ICCCI-2010) ,
Kaohsiung, Taiwan. http://bit.kuas.edu.tw/~iccci10/
48. Amar Khoukhi, Munirdine Oloso, Moustafa Elshaei and Abdulazeez Abdulraheem
(2011). Viscosity And Gas/Oil Ratio Curves Estimation Using Advances To Neural
Networks, WoSSPA11, May 09-11 2011, Tipaza, Algeria.
50. Anifowose Fatai, Helmy Tarek and A. Abdulraheem (2011). Functional Networks
as a Best-Model Selector in Computational Intelligence Hybrid Models for
Petroleum Reservoir Characterization”, Proceedings of the 5th Global Conference
on Power Control and Optimization, Dubai, UAE, 1-3 June, 2011.
53. M. Attia, M.A. Mahmoud, A. Abdulraheem, and S.A. Al-Neaim (2013). Evaluation
of the Pressure Drop due to Multi Phase Flow in Horizontal Pipes Using Fuzzy
Logic and Neural Networks. 18th Middle East Oil & Gas Show and Conference
(MEOS), Mar 10 - 13, 2013 2013, Bahrain International Exhibition Centre,
Manama, Bahrain
14
55. Abdulrauf R. Adebayo, A. Abdulraheem, and A. T. Al-Shammari (2013). Promises
of Artificial Intelligence Techniques in Reducing Errors in Complex Flow and
Pressure Losses Calculations in Multiphase Fluid Flow in Oil Wells. Nigeria
Annual International Conference and Exhibition, 30 July - 1 August 2013, Lagos,
Nigeria.
63. Rammay, M.H. and A. Abdulraheem (2014). Automated History Matching Using
Combination of Adaptive Neuro Fuzzy System (ANFIS) and Differential Evolution
Algorithm. SPE 172992. SPE Large Scale Computing and Big Data Challenges in
15
Reservoir Simulation Conference and Exhibition, 15-17 September, Istanbul,
Turkey
65. Al-Arfaj, M.K., M. Amanullah, A.S. Sultan, M.E. Hossain, and A. Abdulraheem
(2014). Chemical and Mechanical Aspects of Wellbore Stability in Shale
Formations: A Literature Review. Abu Dhabi International Petroleum Exhibition
and Conference, 10-13 November, Abu Dhabi, UAE.
66. Alarifi, S., gS. Al-Nuaim, A. Abdulraheem. (2015). Productivity Index Prediction
for Oil Horizontal Wells Using different Artificial Intelligence Techniques. SPE
172729. SPE Middle East Oil & Gas Show and Conference, 8-11 March, Manama,
Bahrain.
67. Bageri, B.S., A. Abdulraheem, F.A. Anifowose (2015). Artificial Intelligence Based
Estimation of Water Saturation Using Electrical Measurements Data in a Carbonate
Reservoir. SPE 172564. SPE Middle East Oil & Gas Show and Conference, 8-11
March, Manama, Bahrain.
72. Olatunji, S.O., A. Selamat, and A. Abdulraheem. (2015). Harnessing the Power of
Type-2 Fuzzy Logic System in the Prediction of Reservoir Properties. SPE 178005.
SPE Saudi Arabia Section Annual Technical Symposium and Exhibition, 21-23
April, Al-Khobar, Saudi Arabia.
16
74. Bageri, B.S., M.A. Mahmoud, A.S. Sultan, S.H. Al-Mutairi, A. Abdulraheem
(2015). Effect of the Drilled Cuttings on Filter Cake Sealing Properties and Internal
Invasion Depth in MRC Wells. SPE Kuwait Oil and Gas Show and Conference, 11-
14 October, Mishref, Kuwait. SPE-175168-MS. http://dx.doi.org/10.2118/175168-
MS.
78. Tariq, Z., Al-Nuaim, S., Abdulraheem, A., & Khan, M. R. (2016, November 21).
New Methodology to Quantify Productivity of Vertical Wells in Naturally Fractured
Solution Gas Drive Reservoirs with Dual Porosity and Dual Permeability. Society
of Petroleum Engineers. doi:10.2118/185314-MS
82. Elkatatny, S.M., Tariq, Z., and Mahmoud, M.A., Abdulraheem, A. Abdelwahab,
A.Z. Woldeamanuel, M., ., and Mohamed, I. M. 2017. An Artificial Intelligent
Approach to Predict Static Poisson's Ratio. Paper ARMA 17-771 presented at the
51st US Rock Mechanics / Geomechanics Symposium held in San Francisco,
California, USA, 25-28 June.
83. Tariq, Z., Elkatatny, S.M., and Mahmoud, M.A., Abdulraheem, A. Abdelwahab,
A.Z. and Woldeamanuel, M. 2017. Estimation of Rock Mechanical Parameters
using Artificial Intelligence Tools. Paper ARMA 17-301 presented at the 51st US
17
Rock Mechanics / Geomechanics Symposium held in San Francisco, California,
USA, 25-28 June.
84. Tariq, Z., Elkatatny, S.M. and Mahmoud, M.A., Abdulraheem, A. Abdelwahab,
A.Z., Woldeamanuel, M., and Mohamed, I. M. 2017. Development of New
Correlation for Unconfined Compressive Strength for Carbonate Reservoir Using
Artificial Intelligence Techniques. Paper ARMA 17-428 presented at the 51st US
Rock Mechanics / Geomechanics Symposium held in San Francisco, California,
USA, 25-28 June.
85. Tariq, Z., Elkatatny, S.M., Mahmoud, M., Abdulwahab Z., A., and Abdulraheem, A.
2017. A New Technique to Develop Rock Strength Correlation Using Artificial
Intelligence Tools. Paper SPE 186062 to be presented at the SPE Reservoir
Characterization and Simulation Conference and Exhibition. Abu Dhabi, UAE, 8-10
May.
86. Dossary, M., Elkatatny, S.M., Hamid, O., Mahmoud, M.A., and Abdulraheem, A.
2017. Reservoir Geomechanics in Tight Sandstone Reservoir. Paper SPE presented
at the SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition,
Dammam, Saudi Arabia, 24-27 April.
87. Tariq, A., Elkatatny, S. A., Mahmoud, M.A., Zaki, A., Abdulraheem, A. 2017. A
New Approach to Predict Failure Parameters of Carbonate Rocks using Artificial
Intelligence Tools. Paper SPE presented at the SPE Kingdom of Saudi Arabia
Annual Technical Symposium and Exhibition, Dammam, Saudi Arabia, 24-27
April.
88. Moussa, T., Elkatatny, S.M., Mahmoud, M.A., and Abdulraheem, A. 2017. A
Hybrid Artificial Intelligence Method to Predict Gas Solubility and Bubble Point
Pressure”, Paper SPE presented at the SPE Kingdom of Saudi Arabia Annual
Technical Symposium and Exhibition, Dammam, Saudi Arabia, 24-27 April.
89. Abdulhameed, A., Elkatatny, S.M., Mahmoud, M.A., Abdulraheem, A., and
Aburesh, M. 2017. New Technique to Determine the Total Organic Carbon Based
on Well Logs Using Artificial Neural Network (White Box)” Paper SPE presented
at the SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition,
Dammam, Saudi Arabia, 24-27 April.
91. Bageri, A.S., R. Gajbhiye, A. Abdulraheem (2017). Evaluating the Effect of Surface
Tension on Two-Phase Flow in Horizontal Pipes. SPE-SPE 8403-MS. SPE
Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition held in
Dammam, Saudi Arabia, 24–27April 2017.
18
92. Abdulhameed, A., Elkatatny, S.M., Mahmoud, M.A., and Abdulraheem, A. 2017.
A New Empirical Equation for Estimating Oil Recovery Factor Based on Artificial
Neural Network Technique. SPE-187621 presented at the 3rd Kuwait Oil & Gas
Show and Conference to be held 15 – 18 October, 2017 at Kuwait International Fair
in Kuwait.
93. Alloush, R., Elkatatny. S.M., Mohamed, M., Abdulraheem, A. 2017. Estimation of
Geomechanical Failure Parameters from Well Logs Using Artificial Intelligence
Techniques. SPE-187625 presented at the 3rd Kuwait Oil & Gas Show and
Conference to be held 15 – 18 October, at Kuwait International Fair in Kuwait.
94. Hassan, A., Elkatatny. S.M., and Abdulraheem, A. 2017. New Approach to
Quantify Productivity of Fishbone Multilateral Well. Paper SPE 187458 to be
presented at the SPE Annual Technical Conference and Exhibition (ATCE) to be
held 09 – 11 October, 2017 in San Antonio, TX, USA.
95.
Under review
1) Brittleness Estimation and Anisotropy Analysis of the Lower Silurian Qusaiba
Shale, Saudi Arabia. Accepted in 4th International Conference on Integrated Petroleum
Engineering and Geosciences, Kuala Lumpur, Malaysia, ICIPEG 2016 (Article # 1570256969).
Technical Presentations:
1. A Review of Analytical and Semi-Analytical Methods for Prediction of Sand
Production. A. Abdurraheem, M.R. Awal & M. Ahmad, Workshop on the Role of
Geomechanics in Solving Upstream Challenges. Organized by EXPEC-ARC, Saudi
Aramco, May 26-27, Le gulf Meridien, Al-Khobar.
2 TECHNICAL NOTES
3 PATENTS
19
2. Ba Geri, B., Mahmoud, M.A., Shawabkeh, R.A., and Abdulraheem, A. 2015. Single
and Multi-Stage Removal of Barite Scale and Barite Filter Cake. US 450231, Filed.
4 BOOKS/BOOK CHAPTERS
3. Ali Selamat, S. O. Olatunji, Abdul Azeez Abdul Raheem (2012). Modeling PVT
Properties of Crude Oil Systems Based on Type-2 Fuzzy Logic Approach and
Sensitivity Based Linear Learning Method, Computational Collective
Intelligence. Technologies and Applications Lecture Notes in Computer Science
Volume 7653, 2012, pp 145-155.
M.S. Thesis
2. Reservoir Quality of the Unayzah Formation in Waqr, Tinat, and Haradh Fields.
Mr. Aamir Siddiqui. Department of Earth Sciences, KFUPM. 2002. - Member
20
5. Use of Latest Artificial Intelligence Techniques of Predicting Permeability in the
HC Reservoir Using Well Log Data. Mr. Kashif Ahmad. SCHOOL OF
ENGINEERING, The Robert Gordon University, Aberdeen, UK. 2008. External
Advisor and Member
8. Estimation of Reservoir Properties From Seismic Attributes and Well log Data
using Artificial Intelligence. Mohammad Sitouah. Department of Earth Sciences,
KFUPM. 2009. Member
10. Comparing Hydrocarbon Volume between LSA (Laminated Sand Analysis) and
Standard Techniques in Low Resistivity Sandstone Reservoirs. O A. Bawazir.
Department of Earth Sciences, KFUPM. Dec. 2011- Feb. 2012. Member.
15. Wael Harbi. An Artificial Intelligence Approach for Predicting Water Saturation
in Carbonate Reservoirs. Dec. 2014. Main Advisor
16. A.M. Al-Hussain. An Integrated Approach for Downhole Leak Detection. Dec.
2014. PETE Dept. Member
17. Ayyaz Mustafa. Geological, Geochemical, and Geomechanical Characterization
of Qusaiba Shale. Dec. 2014. ES Dept. Member
21
19. M.I. M. ElHag. Development Of Stable Bentonite For Drilling Fluid
Formulations Using Local Sources. May. 2015. PETE Dept. Member
21. A.W. Adeniji. A global optimization approach to the gradual deformation method
of history matching. May. 2015. PETE Dept. Member
25. A. M. Ali. Log Porosity and Lithology Prediction from Seismic Data: Frontier
and Tensleep Formations, Wyoming. Mar. 2015. ESc Dept. Member
26. Ahmed Sahaf. Prediction of Flow Zone Indicators in Carbonate Reservoirs using
Hybrid Modeling. May 2015. Main Advisor.
2. Mohammed Dhafer Alajmi. Risk Based Approach To Predict Casing Leaks Using
Electromagnetic Corrosion Logs. Petroleum Engineering Dept. Dec. 2105.
Member.
6.
PhD. Dissertation
22
1. Optimization of Drilling Parameters Using Specific Energy in Real-Time. M.A.
Khamis. PhD Dissertation. Department of Petroleum Engineering, KFUPM. Mar.
2012- May 2013. Member.
2. PN: 21148 - Rock Mechanics of Ghawar Khuff Reservoirs (1995-97) (SR. 3.7 million) -
Project Manager
3. PN: 21140 - Rock Mechanics Consulting Services for Berri Field (1996)
- Member
5. PN: 21171 - Ultrasonic Velocity and Wave Attenuation Measurements (1997-2000) (SR.
3.14 million) - Project Manager
23
Phase IV: Measurement of acoustic properties of Khuff carbonate rocks (2000 - 2001)
6. CPM2205 - Wellbore Instability - Khafji Reservoir, Zuluf Field – Phase I (2000 - 2001)
(SR 0.8 million) - Project Manager
9. CPM2211 - Calibration of Sonic Logs (Nov 1, 2000 – Nov. 30, 2001) (SR 0.6 millions) -
Project Manager
10. CPM2227 - Wellbore Instability - Khafji Reservoir, Zuluf Field – Phase II (Jun 2002 –
Sep 2003) (SR 1.6 million) - Project Manager
11. CPM2228 - Artificial Neural Network Models for Rock Mechanical Properties (Aug
2002 – Dec. 2004) - Member
12. CPM2236 – Saturation Estimation from Sonic and Saturation Logs (Sep 2003 – Jan 2004)
(SR 0.6 million) – Project Manager
13. CPM2248 – Critical assessment of key analytical methods for sanding prediction (Apr
2005 – Feb 2006) – Member and Liason
14. CPM2252 – Developing Fuzzy Logic Modeling Capability (Jun 2005 – May 2006) (SR
0.6 million) – Project Manager
15. CPM2266 - Analysis of core, drill cutting and formation fluid samples. (Apr 2006 – Apr
2009). – Member (SR 40 millions).
16. CPM2275 – Developing Fuzzy Logic Modeling Capability-Phase II (Apr 2007 – Jun
2008) (SR 0.5 million) – Project Manager
17. CPM2276 – Permeability Modeling for HRDH/Khuff, Using Fuzzy Logic Approach (Apr
2007 – Feb 2008) (SR 0.5 million) – Project Manager
19. CPM2289 – Prediction of Permeability Profiles Using 3D Seismic Data and Openhole
Logs (Feb 2010 – Feb 2011) (SR 0.5 million) – Project Manager
21. CPM2255 – Development of an ANN model for reservoir fluid properties (PVT) (Sep
2005-ongoing) Member (SR 0.75 millions).
24
22. CPM2262 - Core, drill cuttings and formation fluids/gas analysis in the area of Block
“A”, Rub-Al-Khali. Luksar Saudi Arabia. (4th Feb 2006 – 4th May 2013). – Member (SR
15.5 millions)
23. CPM22295 - Effect of Saturation and pore structure on acoustics of carbonates. (Nov. 1,
2011 - Dec 31, 2013) - Member. Budget: SR 2.2 Millions. Member.
25. KACST AR30-258. A Decision Support System For Improving Directional Steering.
2012-14. – Member
29. NSTIP 14-OIL468-04. Facies, Diagenesis, and Reservoir Qualities of Late Ordovician
Sarah Formation, Subsurface Rub’ Al-Khali Basin, Saudi Arabia. Member. March 1,
2015-Feb 28, 2017. SR 1,966,660. Member.
30. DSR Reservoir Characterization Group Project. Qusaiba Member: outcrop Analog from
Northwest Saudi Arabia. Sep 2015 - Jun. 2017.
Proposals:
1996 An Investigation into the Fracture Toughness and Tensile Strength of Indigenous
Rocks (PW, E) - Submitted to KACST 1996.
25
1997 Ultrasonic Velocity and Wave Attenuation Measurements
Submitted to S. Aramco - FUNDED (3 year project)
2000 Stress Sensitivity and Response to Water Injection in Fractured Arab-D Reservoir -
Submitted to S. Aramco - FUNDED (approx. 1 year project)
2002 Artificial Neural Network Models for Rock Mechanical Properties - Submitted to S.
Aramco - FUNDED (approx. 1 year project)
2003 Saturation Estimation from Sonic and Saturation Logs - Submitted to S. Aramco -
FUNDED (approx. 1 year project)
2005 Critical assessment of key analytical methods for sanding prediction - Submitted to
S. Aramco - FUNDED (approx. 1 year project)
2006 Development of Monitoring System for Upstream Activities for the Ministry of
Petroleum AND Mineral resources - Submitted to The Ministry of Petroleum and
Mineral Resources.
2007 Permeability Modeling for HRDH/Khuff, Using Fuzzy Logic Approach - FUNDED
by S. Aramco.
2007 Data Mining and Artificial Intelligence in Enhancing Exploration and Production -
Submitted to the committee on Strategic Plan for Localization and Development of
Oil and Gas Exploration and Production Technologies.
2009 Prediction of Permeability Profiles Using 3D Seismic Data and Openhole Logs
26
Concepts / Ideas:
1999 Increasing production from the depleting and ‘uneconomic’ fields susceptible to
severe sand production – Phase I - Submitted to S. Aramco.
1994 Annual Task Report for PN-21111 (Mathematical modeling, numerical simulation
and software development).
1997 Final Report for Service Project: Rock Mech. Consulting Services for Berri Field.
2003 Final Report - Wellbore Instability - Khafji Reservoir, Zuluf Field – Phase II.
Submitted to S. Aramco.
2004 Final Report – Saturation Estimation from Sonic and Saturation Logs Submitted to
S. Aramco.
2006 Progress Report - Critical assessment of key analytical methods for sanding
prediction.
2006 Final Report - Critical assessment of key analytical methods for sanding
prediction.
27
2008 Final Report - Permeability Modeling for HRDH/Khuff, using Fuzzy Logic
Approach
2008 Final Report - Developing Fuzzy Logic Modeling Capability – Phase II. Submitted
to S. Aramco.
2009 Final Report – Development of artificial neural network models for reservoir fluid
properties. Submitted to S. Aramco.
2010 Final Report - Developing Fuzzy Logic Modeling Capability – Phase II. Submitted
to S. Aramco.
Technical Reports (Before Joining The Research Institute, King Fahd University of
Petroleum and Minerals):
1991 Annual Research Report for the Oklahoma Center for Advancement of Science and
Technology (OCAST), June, 1991. .
1992 Annual Research Report for the Oklahoma Center for Advancement of Science and
Technology (OCAST), June, 1992..
1993 Pore Collapse Mechanisms in Reservoir Rocks, Final Report to the Oklahoma
Center for Advancement of Science and Technology (OCAST), with M.
Azeemuddin and S. Mowar, July, 1993. .
Has coordinated the research in the area of Petroleum Related Rock Mechanics and Rock
Physics at the Research Institute, KFUPM.
For the last several years, he is coordinating the research in the area of Artificial Intelligence
application in Oil and Gas Industry.
28
3.2 RESEARCH COMMITTEES PARTICIPATION
Surveyed for the instruments for the different project works and bought equipment worth
almost SR 1.5 million. Items 2, 3, and 4 below were purchased under my supervision and
recommendations after I personally visited the rock mechanics laboratories at Imperial
college, London; French Petroleum Institute at Paris, Rock Mechanics Laboratory at
SINTEF, Trondheim, Norway, and different rock mechanics laboratories in the U.S. The
equipment were purchased to suit the requirements of our projects after consultation and
input with the team members of the respective projects. This has led to a completion of the
existing setup of Petroleum Related Rock Mechanics facilities at the Research Institute. The
new equipment include:
1. Wellbore simulation laboratory: Took part in the design of the laboratory. The
equipment is designed to simulate the phonemenon of sand production in the
laboratory.
4. Ultrasonic Test System for Rocks: For measuring compressional and shear wave
velocities of reservoir rock samples at reservoir conditions of temperature and
pressure.
5. Fracture toughness testing setup and sample preparation: Took part in the design of
fracture toughness setup design and also in buying relevant equipment for creating
straight and curved notches in the rock specimens, especially the Rotating Disk
Saw and the Wire Saw.
29
7. Steady State Permeability Measurement Setup for highly permeable samples: Took
a leading part in a team to prepare a setup for measurement of permeability at
extremely high confining pressures of 10,000 psi. The whole setup was built using
the available accessories in the institute and buying some spare parts.
8. Pulse Decay Permeability Measurement Setup for tight samples: Took part in a
team to prepare a setup for measurement of permeability at extremely high
confining pressures of 10,000 psi. The whole setup was built using the available
accessories in the institute and buying some spare parts.
9. Porosity Measurement Setup (in parallel to the Steady State and Pulse Decay
Permeability Measurement Setup): Took part in a team to prepare a setup for
measurement of permeability at extremely high confining pressures of 12,000 psi.
The whole setup was built using the available accessories in the institute and
buying some spare parts. Items 5, 6, 7, 8, and 9 have led to significant cost
savings as no new equipment or accessories were ordered for these setups.
Short Courses attended: Waterflooding (1995); Modern Well test analysis (1995);
Geology of Arabian Peninsula (1998)
30
Course teaching Assignments at KFUPM
2013-14 Reservoir Rock Mechanics (PETE 670) for Graduate and Post Graduate
Students (Fall Semester).
2011, 2012 Artificial Intelligence for Petroleum Engineers (PETE 685) for Graduate and
Post Graduate Students (Spring Semester).
2010 (fall), 2010 (spring), 2009 (fall), 2009 (fall), 2007 (fall), 2006 (fall), 2005 (fall)
Petroleum Related Rock Mechanics (PETE 400) for Senior Undergraduate
Students (Fall Semester 0102).
1987-1989 Taught a course on "Engineering Graphics" for several semesters (During the
time when I was Lecturer-B at the Civil Engineering Department, KFUPM)
1. Coordinated and taught the short course, “Rock Mechanics for Petroleum
Engineers.” May, 2006.
2. Coordinated and taught the short course “Rock Mechanics for Petroleum
Engineers.” Phase-I in Apr, 2003 and Phase-II in Oct, 2004.
3. Coordinated and taught the short course, “Wellbore Instability.” Apr, 2003.
4. Coordinated and taught the short course, “Rock Mechanics for Petroleum
Engineers.” Apr, 2002.
1997 Co-supervisor for a 5-week training program for Undergraduate Student (Mr. Ali M.
Ramady)
31
1996-8 Training two engineers (Mr. Safdar Khan & Mr. Bechir Al-Mtawaa) in the
Petroleum Engineering section on different aspects of Petroleum Related Rock
Mechanics related experimental and theoretical work.
Software Development
Developed a Finite Element based software for simulating the stress-state and onset of sand
production in reservoir samples.
32
5. AWARDS
Special Recognition / Honors and Awards:
2003 Project Manager of the team awarded for Best Research Team Award of the
Research Institute, KFUPM for the project, "Wellbore Instability – Khafji
Reservoir (Phase II)"
2002 Best Research Project Manager Award of the Research Institute, KFUPM for
the project, "Wellbore Instability – Khafji Reservoir (Phase I)"
1999 Project Manager of the team awarded for Best Research Team Award of the
Research Institute, KFUPM for the project, "Rock Mechanics Study of Ghawar
Khuff Reservoirs" (PN 21148).
1999 Appreciation from the Project Coordinator from Saudi Aramco for "excellent
execution and reporting" and "one of the best technically study I have been
personally associated with" for the project, "Rock Mechanics Study of Ghawar
Khuff Reservoirs" (PN 21148).
1999 Member of the team for Best Short Course Award by KFUPM.
1999 Appreciation plaque by SPE Student Chapter, KFUPM for involvement in the
local SPE chapter.
1996 Member of the team awarded for Best Research Team Award of the Research
Institute, KFUPM for the project, "Rock Compressibility and Formation
Strength Indices in Sandstone Reservoirs" (PN 21111).
33