RH Series

Zero Velocity - Magnetic Hall Effect Sensors - 5/8 and 3/4 Threads
Specifications Environmental
Operating Temperature:
Power Supply -40°C to +125°C
Power Supply Voltage:
Thermal Shock:
4.5 - 24 Vdc
100 cycles air to air (-40° to +130°C)
Power Supply Current: 1 min. ramp time with 30 min. soak
50 mA maximum Salt Spray:
Per MIL-STD-202, method 201, test cond. B, 5%
Outputs NaCl for 48 hrs. No visible corrosion.
Output Voltage: Humidity:
Essentially square wave fanout to 10 TTL inputs 92% RH@ 40°C for 90 hrs.
TTL Compatible: (See Figure 1) No visible corrosion.
50% ±15% duty cycle Dielectric Strength:
Logic 0: +.6 Vdc maximum Per MIL-STD-202, method 301, 1000 Vrms
Logic 1: +4 to +4.6 Vdc @ 5mA (60Hz) for 5 sec. leads to case. 1.0 mA
max. leakage.
Supply Tracking: (See Figure 2) Insulation Resistance:
50% ±15% duty cycle Per MIL-STD-202, method 302, 500 Vdc for 30
sec. leads to case. 100 mega-ohm min.
Logic 0: +.6 Vdc maximum
Vibration:
Logic 1: Vo = Vs x RL Per MIL-STD-202, resonant frequency search,
RL + 2.2k sine method 204, test cond. C&D (20g);
random method 214a, test cond. A&B (7.56g) for
Output Impedance: 15 min.
2.2K Ohms ±5% Shock:
Output Current: Per MIL-STD-202, method 213b (sawtooth),
20 mA sink maximum test cond. H&I (1 00g, 6 ms), 3 shocks,
Output Current - Short Circuit: mutually perpendicular planes
5 mA maximum with 10V power supply
Reverse Battery Voltage: Materials
-30 Vdc Housing:
300 series stainless steel
Mechanical Leads:
Target Frequency: AWG #24 Teflon, 200°C
0 to 15 kHz Cable:
Target Air Gap: AWG #20 Irradiated cross-linked polyolefin,
.005 to .020 with a 24 diametral pitch gear
.005 to .030 with a 20 diametral pitch gear 125°C
.005 to .050 with a 12 diametral pitch gear Rotational alignment of sensing face is not

AI-Tek Instruments, Cheshire, CT USA

.005 to .075 with an 8 diametral pitch gear required for optimum output signal.

TTL Compatible Fig. 1 Supply Tracking Fig. 2

VIN SUPPLY (+) VIN SUPPLY (+)

2.2K 2200
INTERNAL INTERNAL ohms
SENSOR SENSOR
CIRCUITRY VOUT CIRCUITRY VOUT

COMMON/GND (-) COMMON/GND (-)

Note: Either output will work with any AI-Tek Tachometer.

26
 RH Series
Zero Velocity - Magnetic Hall Effect Sensors - 5/8 and 3/4 Threads
Hex Body with Cable

Part Num. Thread “A" Dimension "B" Dimension Cable Length Output
RH1512-013 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) TTL Compatible
RH1522-013 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) Supply Tracking
RH1512-014 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) TTL Compatible
RH1522-014 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) Supply Tracking
RH1612-013 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) TTL Compatible
RH1622-013 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) Supply Tracking
RH1612-014 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) TTL Compatible
RH1622-014 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) Supply Tracking
Net Weight: 9 oz. max.

Dimensions in inches and (mm).

AI-Tek Instruments, Cheshire, CT USA

27
 RH Series
Zero Velocity - Magnetic Hall Effect Sensors - 5/8 and 3/4 Threads
Round Body with Connector

Part Num. Thread "A" Dimension "B" Dimension "C" Dimension Output
RH1512-005 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) TTL Compatible
RH1522-005 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) Supply Tracking
RH1512-006 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133-655) TTL Compatible
RH1522-006 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) Supply Tracking
RH1512-007 .625-18 UNF-2A 4.000 (101.600) 5.875 (149.225) 6.512 (165.405) TTL Compatible
RH1522-007 .625-18 UNF-2A 4.000 (101.600) 5.875 (149.225 6.512 ( 65.405) Supply Tracking
RH1612-005 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) TTL Compatible
RH1622-005 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) Supply Tracking
RH1612-006 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) TTL Compatible
RH1622-006 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) Supply Tracking
RH1612-007 .750-20 UNEF-2A 4.000 (101.600) 5.875 (149.225) 6.512 (165.405) TTL Compatible
RH1622-007 .750-20 UNEF-2A 4.000 (101.600) 5.875 (149.225) 6.512 (165.405) Supply Tracking

Net Weight: 7 oz. max.

Fully Threaded with Leads

AI-Tek Instruments, Cheshire, CT USA

Part Num. Thread "A" Dimension Lead Length Output

RH1512-009 .625-18 UNF-2A 1.500 (38.100) 12(304) TTL Compatible
RH1522-009 .625-18 UNF-2A 1.500 (38.100) 12(304) Supply Tracking
RH1512-010 .625-18 UNF-2A 2.750 (69.850) 12(304) TTL Compatible
RH1522-010 .625-18 UNF-2A 2.750 (69.850) 12(304) Supply Tracking
RH1612-009 .750-20 UNEF-2A 1.500 (38.100) 12(304) TTL Compatible
RH1622-009 .750-20 UNEF-2A 1.500 (38.100) 12(304) Supply Tracking
RH1612-010 .750-20 UNEF-2A 2.750 (69.850) 12(304) TTL Compatible
RH1622-010 .750-20 UNEF-2A 2,750 (69.850) 12(304) Supply Tracking

Net Weight: 3 oz. max.

28 Dimensions in inches and (mm).
 RH Series
Zero Velocity - Magnetic Hall Effect Sensors - 5/8 and 3/4 Threads
UL/CSA Explosion Proof Sensors

Part Num. Thread Thread Length Overall Length Cable Length Output
RH1612-025 .750-20 UNEF-2A 1.375 (34.92) 4.750 (120.65) 10 ft. (3. 0 m) TTL Compatible

Rating: UL & CSA listed for hazardous locations. Class I, Div. 1, Groups A, B, C & D; Class II, Div., 1,
Groups E, F & G. Temp Code T4A. Connect only to NEC Class 2 circuits.
Net Weight: 23 oz. max.

Part Num. Thread "A" Dimension "B" Dimension Cable Length Output
RH1512-026 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) TTL Compatible
RH1522-026 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) Supply Tracking
RH1512-027 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) TTL Compatible
RH1522-027 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) Supply Tracking
RH1612-026 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.72.5) 10 ft (3.05m) TTL Compatible
RH1622-026 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) Supply Tracking
RH1612-027 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) TTL Compatible
RH1622-027 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) Supply Tracking
Rating: UL & CSA listed for hazardous locations. Class I, Div. 1, Groups A, B, C & D; Class II, Div., 1,
AI-Tek Instruments, Cheshire, CT USA

Groups E, F & G. Temp Code T4A. Connect only to NEC Class 2 circuits.
Net Weight: 9 oz. max.

TTL Compatible Fig. 1 Supply Tracking Fig. 2

VIN SUPPLY (+) 2200

VIN SUPPLY (+)
2200
ohms INTERNAL ohms
INTERNAL
SENSOR SENSOR
CIRCUITRY VOUT CIRCUITRY VOUT

COMMON/GND (-) COMMON/GND (-)

HOUSING EARTH GND HOUSING EARTH GND

Dimensions in inches and (mm).

29
 RH Series
Zero Velocity - Magnetic Hall Effect Sensors - 3/8 Diameter
Specifications
Power Supply Mechanical
Power Supply Voltage: Target Frequency:
4.5 - 24 Vdc 0 to 15 kHz
Power Supply Current: Target Air Gap:
50 mA maximum .005 to .015 with a 24 diametral pitch gear
.005 to .025 with a 20 diametral pitch gear
Outputs .005 to .050 with a 12 diametral pitch gear
Output Voltage: .005 to .065 with an 8 diametral pitch gear
Essentially square wave fanout to 10 TTL inputs
Environmental
Supply Tracking: (See Figure 1) Operating Temperature:
50% ±15 % duty cycle -25°C to + 125°C (105°C Cable)
Logic 0: +.6 Vdc maximum
Logic 1: Vo = Vs x RL Materials
RL + 2.2k Housing:
300 series stainless steel
Output Impedance: Leads:
2.2K Ohms ±5% AWG #24 Teflon, 200°C
Output Current: Cable:
20 mA sink maximum AWG #26 PVC, 105°C
Output Current - Short Circuit: Rotational alignment of sensing face is not re-
5 mA maximum with 10V power supply quired for optimum output signal

Supply Tracking

AI-Tek Instruments, Cheshire, CT USA

Note: Will work with any AI-Tek Tachometer.

30 Dimensions in inches and (mm).

 RH Series
Zero Velocity - Magnetic Hall Effect Sensors - 3/8 Diameter
Fully Threaded

Dim A

Part Num. Thread Cable Length (C) Lead Length (L) Dimension A
RH1320-001 .375-32 UNEF-2A — 12 (304) 1.630
RH1320-003 .375-32 UNEF-2A 10 ft. (3.05 m) — 1.630
RH1320-009 .375-24 UNF-2A — 12 (304) 1.630
RH1320-010 .375-24 UNF-2A 10 ft. (3.05 m) — 1.630
RH1320- 012 .375-24 UNF-2A 10 ft. (3.05 m) — 3.000
New Weight: 0.7 oz. max.

Round Body
AI-Tek Instruments, Cheshire, CT USA

Part Num. Cable Length (C) Lead Length (L)

RH1320-005 — 12 (304)
RH1320-006 10 ft. (3.05 m) —

Dimensions in inches and (mm).

31