Unit 30 | Fern Close | Pen-Y-Fan Ind Est | Oakdale | Gwent | NP11 3EH | UK

Tel: +44 (0) 1495 236260 [email protected] | www.nsf.org

TEST REPORT

Customer: C0704144
Sovisy Solutions
11-15, D.K. Estate – 2,
B/H, Phase - 3,
GIDC, Chhatral,
Gandhinagar, GJ 382729
India

Result This product has satisfied the criteria set out in BS 6920: Part 1: 2014 "Specification" and thus
is suitable for use with cold water but not hot water.

Customer Name Sovisy India Private Limited

Product Sovisy Solutions GRP
Test Undertaken BS 6920: 2014 - Suitability of non-metallic products for use in contact with water intended for
human consumption with regard to their effect on the quality of the water
Job Number J-00435004
Work Order Number W0764799

Thank you for having your product tested by NSF Wales Ltd.
Please contact your Account Manager if you have any questions or concerns pertaining to this report.

Report Date 27-OCT-2022

Report Authorisation

Michael Bustin - Materials Testing Manager

0626

FI20221027073243 J-00435004 Page 1 of 11

This report is issued in accordance with the laboratory accreditation requirements of the United Kingdom Accreditation Service. It provides traceability of
measurement to the SI system of units and/or to units of measurement realised at the National Physical Laboratory or other recognised national metrology institutes.
This report shall not be reproduced, except in its entirety, without the written approval of NSF Wales Ltd. This report does not represent NSF Certification or
authorisation to use the NSF Mark. Authorisation to use the NSF Mark is limited to products appearing in the Company's Official NSF Listing (www.nsf.org). The
results relate only to those items tested, in the condition received at the laboratory.
Result Summary Section
Test Result
Odour and flavour of water BS 6920: Part 1: 2014, Clause 4 - 23°C Pass
Appearance of Water BS 6920: Part 1: 2014, Clause 5 Pass
Growth of Microorganisms BS 6920: Part 1: 2014, Clause 6 Pass
Extraction of substances that may be of concern to public health BS 6920: Pass
Part 1: 2014, Clause 7 - 23°C
Extraction of Metals BS 6920: Part 1: 2014, Clause 8 - 23°C Pass

FI20221027073243 J-00435004 Page 2 of 11

Sample Details
Date of Receipt of Application Form 29/04/2022
Date of Receipt of Product for Test 15/06/2022
Product * Sovisy Solutions GRP
Nature of Material * GRP
Date Test Sample Manufactured * 11/04/2022
Batch Number * 221104-01-SOVISY
Receipt Conditions Good Condition
Receipt Packaging Clear plastic bag
Product Manufacturer * Sovisy India Private Limited
Product Manufacturing Site * Gujrat
Tradename and Reference of Product * SOVISY SOLUTIONS GRP WATER STORAGE
PANEL
Method of Manufacture * Compression moulded
Typical Use of the Product * Tank used for water storage.
Nature of Product * Panel
Sampling Procedure * Random
Address of Product Manufacturer * 11-15, D.K. Estate - 2, B/H, Phase - 3, GIDC,
Chhatral - 382729 Dist - Gandhinagar, Gujrat.

* denotes customer supplied information

FI20221027073243 J-00435004 Page 3 of 11

Sample Preparation
Description/Appearance of the product Grey, opaque, rigid panel
Length 70 mm
Width 69 mm
Thickness 6.3 mm
Surface area of one article 11411.4 mm2
Number of articles constituting a sample 1.33
Surface area for test 15215.2 mm2
Calibration mark of test container 1L
Storage Conditions As in BS 6920: Part 2: Section 2.1: Clause 5.2

FI20221027073243 J-00435004 Page 4 of 11

 Job Attachments:

Photo 1.

FI20221027073243 J-00435004 Page 5 of 11

 Odour and flavour of water BS 6920: Part 1: 2014, Clause 4 - 23°C
Methodology: BS 6920: Part 2: Section 2.2 and in-house method PROC/MAT 004 and 006.
Date Leaching Test Started: 17-OCT-2022

First Extract - Chlorinated Test Water

Panellist Odour Descriptor Flavour Descriptor Flavour Dilution Number

1 None None 1
2 None None 1
3 None None 1

First Extract - Chlorine Free Test Water

Panellist Odour Descriptor Flavour Descriptor Flavour Dilution Number

1 None None 1
2 None None 1
3 None None 1

On the basis of these results the samples of this product referred to in this report have been found to conform to the
requirements of BS 6920: Part 1: 2014, Clause 4.

FI20221027073243 J-00435004 Page 6 of 11

 Appearance of Water BS 6920: Part 1: 2014, Clause 5 - 23°C
Methodology: BS 6920: Part 2: Section 2.3 and in-house methods PROC/MAT 004, PROC/MAT 027 (colour) and PROC/MAT 030 (turbidity).
Date Leaching Test Started: 11-OCT-2022

First Extract
Name Blank Extract Test Sample Effect

Colour (Hazen) <2 <2 <2

Turbidity (FNU) 0.105 0.136 0.031

On the basis of these results the samples of this product referred to in this report have been found to conform to the
requirements of BS 6920: Part 1: 2014, Clause 5.

FI20221027073243 J-00435004 Page 7 of 11

 Growth of Microorganisms BS 6920: Part 1: 2014, Clause 6
Methodology: BS 6920: Part 2: Section 2.4 and in-house method PROC/MIC 001.
Date Test Started: 30-AUG-2022

Incubation temperature: (30 ±1) °C

Units: mg L-1O 2

Mean Dissolved Day 49

Oxygen Difference
Test Sample 0.3
Positive Reference 6.1
(paraffin wax)
Negative Reference 0.0
(glass)

Mean Dissolved Oxygen Day 49

Test Water Control 7.8

Comments: At the end of this test, the test sample showed no change in colour or appearance.

On the basis of these results the samples of this product referred to in this report have been found to conform to the
requirements of BS 6920: Part 1: 2014, Clause 6.

FI20221027073243 J-00435004 Page 8 of 11

 Extraction of substances that may be of concern to public health BS 6920: Part 1: 2014, Clause 7 - 23°C
Methodology: BS 6920: Part 2: Section 2.5 and in-house methods PROC/MAT 004 and PROC/MIC 004.
Date Leaching Test Started: 5-OCT-2022

Cell concentration used: 5 x 10 5

Cell morphology: Confluent growth of elongated cells, some round cells and cell debris. Media orange/pink in colour.

Sample/Control Cell Morphology Response

Test Sample Confluent growth of elongated cells, some Non-Cytotoxic

round cells and cell debris. Media pink in
colour.
Blank Confluent growth of elongated cells, some Non-Cytotoxic
round cells and cell debris. Media pink in
colour.
Negative Control Confluent growth of elongated cells, some Non-Cytotoxic
round cells and cell debris. Media pink in
colour.
Positive Control All cells rounded and mainly still in Cytotoxic
suspension. Media pink in colour.

On the basis of these results the samples of this product referred to in this report have been found to conform to the
requirements of BS 6920: Part 1: 2014, Clause 7.

FI20221027073243 J-00435004 Page 9 of 11

 Extraction of Metals BS 6920: Part 1: 2014, Clause 8 - 23°C

Methodology: BS 6920: Part 2: Section 2.6 and in-house methods PROC/MAT 006 (leachate preparation) and PROC/ING 003 (ICPMS
analysis).
Date Leaching Tests Started: 28-SEP-2022

First Extract

Metal MAC LOD Blank Sample 1 Sample 2

(µg/L) (µg/L) (µg/L) (µg/L) (µg/L) (µg/L)
Aluminium 200 20 <20 <20 <20
Antimony 5 0.5 <0.5 <0.5 <0.5
Arsenic 10 1 <1 <1 <1
Boron 1000 100 <100 <100 <100
Cadmium 5 0.5 <0.5 <0.5 <0.5
Chromium 50 5 <5 <5 <5
Iron 200 20 <20 <20 <20
Lead 10 1 <1 <1 <1
Manganese 50 5 <5 <5 <5
Mercury 1 0.1 <0.1 <0.1 <0.1
Nickel 20 2 <2 <2 <2
Selenium 10 1 <1 <1 <1

Analytical Method - ICPMS Inductively Coupled Plasma Mass Spectrometry

MAC - Maximum admissible concentration
LOD - Required limit of detection

On the basis of these results the samples of this product referred to in this report have been found to conform to the
requirements of BS 6920: Part 1: 2014, Clause 8.

FI20221027073243 J-00435004 Page 10 of 11

 << Testing Laboratories >>
Flag Id Address
------------------- ------------------------ ----------------------------------------------------------------------------------
All work performed at: NSF_WALES NSF Wales Ltd.
(Unless otherwise specified) NSF Wales Ltd
Unit 30 Fern Close
Pen-Y-Fan Industrial Estate
Oakdale, Newport
NP11 3EH, UK

NOTES
1. This report is issued in accordance with the laboratory accreditation requirements of the United Kingdom Accreditation
Service (UKAS). NSF Wales is UKAS accredited against ISO/IEC 17025:2017 for calibration and testing, laboratory
numbers 0248 and 0626 respectively. For details of the laboratory Schedule of Accreditation please see the UKAS
website (www.ukas.org).
2. The laboratory provides traceability of measurement to the SI system of units and/or to units of measurement realised
at the National Physical Laboratory or other recognised national metrology institutes.
3. Reported conformity statements have been applied in line with the decision rule inherent in the applicable testing standard.
4. Test reports utilise the simplified test report format option allowed by ISO/IEC 17025:2017 (reference clause 7.8.1.3).
This simplified report does not include all of the information on the report specified by ISO/IEC 17025:2017
(clauses 7.8.2 to 7.8.7) but as stated in the standard this data is held by the laboratory and is available to the client
on request.
5. Opinions and interpretations in this report are outside the scope of UKAS Accreditation.
6. The results specified in this report relate only to the sample(s) of the product submitted for testing. Any change in the
source or nature of the product or materials used in the product, method of manufacture or application could affect the
performance of the product.
7. This test report does not constitute approval or endorsement of the product by either NSF Wales or its parent companies.
8. The contents of this report are the copyright of NSF Wales Ltd and all rights are reserved. No part of this publication
may be reproduced, stored in a retrieval system in any form or by any means electronic, mechanical, photocopying,
recording or otherwise, without prior written consent of NSF Wales Ltd.
9. Any queries regarding this report should be addressed to the authorised signatory at NSF Wales. Copies of reports are
retained by NSF Wales for ten years after issue.
10. Non UKAS accredited tests or tests which have been subcontracted will be identified in the following manner:
- Tests marked † are not included in the laboratory's ISO 17025 accreditation schedule.
- Tests marked ‡ have not been performed by NSF Wales and have been performed at an approved subcontract laboratory.
11. We draw to your attention that reports issued by the accredited test laboratories do not of themselves constitute approval
by the Water Regulations Advisory Scheme or the test laboratory. Only a letter from the Scheme, citing a Directory
Reference number can be regarded as indicating approval.
12. Materials and products intended for use by public water supply company in the preparation or conveyance of water may
need to satisfy more comprehensive toxicological requirements as specified by the Drinking Water Inspectorate. These
additional requirements are necessary to ensure water Company usage compiles with Regulation 31 of the Water Supply
(Water Quality) Regulations 2010.

FI20221027073243 J-00435004 Page 11 of 11