Scribd
Upload
181 views

Power Distribution Board

The Power Distribution Board is designed for electrical laboratory systems to provide flexibility, safety, and easy operation. It allows changing the number of circuit breakers and receptacles. The board consolidates essential components like a voltmeter, ammeter, circuit breakers, and receptacles. Additional boards and components can be connected as needed. Safety is prioritized with high quality components throughout.

Uploaded by

adtron
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
181 views

Power Distribution Board

The Power Distribution Board is designed for electrical laboratory systems to provide flexibility, safety, and easy operation. It allows changing the number of circuit breakers and receptacles. The board consolidates essential components like a voltmeter, ammeter, circuit breakers, and receptacles. Additional boards and components can be connected as needed. Safety is prioritized with high quality components throughout.

Uploaded by

adtron
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

POWER DISTRIBUTION BOARD MODEL PDB-1

The ADTRON Power Distribution Board should trainer is specifically designed


to suit the needs of Electrical Laboratory Systems. Safety aspects are
designed into the system with high quality components throughout to safe
guard and protect the operator.

Modules:
. The unit allows wide flexibility to change the number of circuit
breakers and receptacles according the needs.
. The systems includes a range of 4 upto 12 receptacles, each with its
own circuit breaker, that allow the user to connect electrical equipment directly to the board.
. The on-board design consolidates all the essential components into an easy to understand and operate system.
. The design allows for extension boards to be connected to the busbar if needed.
. Addition of additional components can be easily done.
. The unit is equipped with a Voltmeter and Ammeter to monitor the voltage and current in the lines.
. A direct-on-line push button start/stop switch is provided for mains power control.

Specifications:
. Molded Case Circuit Breaker with Overload and shunt trip coil : 1 Nos
. Ammeter 10A /5A with selector switch : 1 Nos
. Voltmeter 500V with selector switch : 1 Nos
. Earth Leakage Circuit Breaker (ELCB) : 1 Nos
. Frequency meter : 1 Nos
. Power factor meter : 1 Nos
. Maximum demand indicator : 1 Nos
. Emergency stop button : 2 Nos
. Kwh meter, 3 phase : 1 Nos
. Kwh meter, 1 phase : 1 Nos
. Circuit breaker, 32 A, three phase : 4 Nos
. Circuit breaker, 6 A, single phase : 4 Nos
. Output socket, 5 pin (3 phase) : 4 Nos
. Output socket, 3 pin (single phase) : 4 Nos
. Set protective fuse : 1 Set
. copper bus bar 0.25 inch x inch : 5 Nos
. Set indicator lights : 1 Set
. Set current transformer : 1 Set
. Set input socket, plug and cable : 1 Nos
. 2 Compartments storage made of mild sheet steel and powder coated : 1 Nos
. Operation manual : 1 Nos

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE


DUE TO CONSTANT DEVELOPMENTS

Advance Electronic Industries


1/135, Nahar & Seth Indl Estate, Pannalal Compd., L.B.S.Marg, Bhandup (W), Mumbai 400078.
Phone: 2596 9769, 9770, 2147, Fax: 2596 2147
E-mail: [email protected], [email protected]

You might also like