PRELIMINARY - subject to change without notice

Q-SYS QIO-ML4i
Q-SYS QIO-L4o
Q-SYS QIO-ML2x2
KEY FEATURES
• Native audio I/O expanders for Q-SYS
• QIO-ML4i: Four (4) mic/line inputs Q-SYS QIO Series
• QIO-L4o: Four (4) line outputs Network audio I/O expanders for Q-SYS
• QIO-ML2x2: Two (2) mic/line inputs and two
(2) line outputs
• Professional mic/line level inputs with +48 VDC
phantom power and/or line outputs The Q-SYS QIO Series network audio I/O expanders Expanded I/O customization: QIO Series is
extend your Q-SYS system’s capabilities and enable intended to present a simpler way to add network
• Microphone detection on inputs streamlined interoperability with non-networked I/O connectivity to Q-SYS systems, decoupling the
enables monitoring, usage statistics, audio devices. By separating local I/O from physical location of the I/O from processing hardware
and failure notifications processing hardware, the QIO Series offer modular to support distributed or centralized processing
and easily scalable network I/O to support your architectures. Additionally, QIO Series lets you
• Power-over-Ethernet capable desired topology. customize your I/O configuration, and compliments
• Daisy-chain up to four QIO network I/O the strengths of newer Q-SYS Core models that were
expanders on a single network run (with local designed with fewer onboard I/O options (Core
Nano, Core 8 Flex, or NV-32-H (Core Capable).
daisy-chained DC power) BENEFITS
• Simple drag-and-drop integration and Simplicity & scalability: Daisy-chain up to four of
The right I/O where you need it: QIO Series
comprehensive management via Q-SYS Designer the QIO Series devices on a single network run (with
network I/O allows you to provide your Q-SYS
Software and Q-SYS Reflect Enterprise Manager local daisy-chained DC power) to consume fewer
system with greater flexibility to deploy mic/line audio
network ports, avoid rack clutter, and allow for quicker
connectivity where it’s most convenient. Each of the
• Surface- or rack-mountable future expansion without pulling additional network
three models featuers a compact form factor that can
cables. Alternatively, QIO Series are also PoE-
• Includes surface mounting hardware be rack- or surface-mounted.
capable, providing simple single cable connectivity
• QIO-RMK rack mounting kit sold separately Audio I/O models: feature professional mic/line (when devices aren’t daisy-chained).
level inputs with +48 VDC phantom power and/
• QIO-PSU DC power supply sold separately or line outputs to ensure high-performance and Designed for Q-SYS: QIO Series network I/O are
compatibility, along with microphone detection on native to Q-SYS, a cloud-manageable audio, video
inputs to enable monitoring, usage statistics and and control platform, built to deliver scalable, flexible
failure notifications. AV solutions well into the future. At its foundation,
the Q-SYS OS serves as the software foundation
• QIO-ML4i: Four (4) mic/line inputs that manages your QIO Series devices along with
a multitude of other native Q-SYS Products in the
• QIO-L4o: Four (4) line outputs platform. Additionally, the modern IT architecture and
development tools of the Q-SYS Platform enable an
• QIO-ML2x2: Two (2) mic/line inputs and two (2) entire Ecosystem of third-party devices developed by
line outputs approved Q-SYS Partners, as well as a worldwide
community of Q-SYS developers using the available
tools found in Q-SYS Open.
 Q-SYS QIO Series

QIO-ML4i QIO-ML2x2 QIO-L4o

Two (2) mic/line inputs and two (2) line
Connectivity Four (4) mic/line inputs Four (4) line outputs
outputs

Mic/Line Inputs

Maximum input level +24 dBu -

Preamplifier gain range 0 dB to 60 dB -

Input sensitivity range - 36 dBu TO +24 dBu -

Phantom power +48 VDC -

Input Frequency Response

20 Hz to 20 kHz +/- 1.0 dB -

Input THD+N @ 1 KHz

@ +24 dBu sensitivity & +24 dBu input < 0.1% -

@ +24 dBu sensitivity & +10 dBu input < 0.05% -

@ +10 dBu sensitivity & +8 dBu input < 0.015% -

@ -10 dBu sensitivity & -10.5 dBu input < 0.015% -

@ -36 dBu sensitivity & -36.5 dBu input < 0.015% -

Equivalent Input Noise < -120 dBu, no weighting @ 20 Hz to 20 kHz -

Input to input crosstalk @ 1 kHz > 85 dB -

Input Dynamic Range

@ +24 dBu sensitivity > 105 dB -

@ +10 dBu sensitivity > 100 dB -

@ -10 dBu sensitivity > 95 dB -

@ -36 dBu sensitivity > 80 dB -

Input impedance 5 kΩ single-ended, 10 kΩ balanced -

Line Outputs

Output audio range level - -36 dBu to +24 dBu

Input Frequency Response

20 Hz - 20 kHz - +/- 0.5 dB

Output THD+N @ 1 KHz

+10 dBu output level - < 0.01%

Output dynamic range - 108 dB

Output to output crosstalk @ 1 kHz - > 85 dB

Output Impedance - 150 Ω to 300 Ω

Sample rate 48 kHz

Bit depth 24 bit

 Q-SYS QIO Series

QIO-ML4i QIO-ML2x2 QIO-L4o

Other Connectors

External power supply 24 VDC nominal, 2.5 A on Euro connector with second connector for daisy-chaining (QIO-PSU power supply sold separately)

LAN (PoE) Gigabit LAN connection for Q-LAN, PoE

PoE specification Conforms to IEEE 802.3af Type 1

LAN (Thru) Ethernet daisy-chaining

General

Dimensions 8.5 x 4.25 x 1.59 in (215.9 x 108 x 40.4 mm)

Weight 1.72 lb (0.78 kg)

Surface- and wall-mountable (hardware included)

Mounting options
Rack-mountable; 1RU, quarter-rack width (QIO-RMK rack kit sold separately)

Environmental

Ambient operating temperature range 0°C to +50°C

Humidity 0% - 85% through 30°C, non-condensing

Storage temperature -20° to 70°C

FCC 47 CFR Part 15, IC ICES-003, CE (EN55032, EN55035), EU RoHS directive 2011/65/EU, WEEE directive 2012/19/EU,
Compliance
China RoHS directive GB/T26572, EAC, UL, C-UL, NOM-019

QIO-ML2x2 QIO-ML4i QIO-L4o

+1·800·854·4079 | +1·714·754·6175 | WWW.QSYS.COM

© 2022 QSC, LLC all rights reserved. QSC, LLC’s trademarks include but are not limited to Q-SYS™, Q-SYS logo, and all trademarks are listed under www.qsc.com/trademarks, some of which are registered in the U.S. and/or other
countries. All other trademarks are the property of their respective owners.