Scribd
Upload
40 views1 page

R1 Ring Sizing

This document provides guidance on measuring your finger size to determine the proper ring size. It outlines two options: measuring an existing ring or wrapping a strip of paper around the finger. For both options, the measurement is taken in millimeters and compared to a chart to find the ring size. The summary also notes that ring width should be considered and sizes may vary depending on factors like temperature, alcohol, or salt intake.

Uploaded by

Shweta Suvarna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views1 page

R1 Ring Sizing

This document provides guidance on measuring your finger size to determine the proper ring size. It outlines two options: measuring an existing ring or wrapping a strip of paper around the finger. For both options, the measurement is taken in millimeters and compared to a chart to find the ring size. The summary also notes that ring width should be considered and sizes may vary depending on factors like temperature, alcohol, or salt intake.

Uploaded by

Shweta Suvarna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RING SIZING GUIDE

OPTION 1:- MEASURING AN EXISTING RING

1.Select and existing ring that fits the desired finger.


2.Measure the internal diameter of the ring (in mm)
3.Use the below chart to determine your ring size.

OPTION 2:- MEASURE YOUR FINGER

1. Wrap a strip of paper around your finger where you'd like your ring to be.
2. Make sure that the paper is pulled snug to your finger, the tighter the
better, to find your best fit.
3. Mark the spot where the paper meets and measure the distance with a ruler (mm).
4. Use the below chart to determine your ring size.

RING SIZE 9 10 11 12 13 14 15

CIRCUMFERENCE (MM) 49 50.0 50.9 51.8 52.8 54.0 55

INTERNAL DIAMETER 15.6 15.9 16.2 16.5 16.8 17.2 17.5


(MM)

DETERMINING WHAT FORO RING YOU SHOULD ORDER


Narrow / Band Rings should fit snugly at the base of the finger but also wide
enough to fit the widest part of the finger. (e.g.: Knuckle)
Wide Rings (6 mm + wide )should be worn a bit looser than narrow / band
rings. It is recommended to add one size to accommodate for extra width.

Please Note: If your knuckle is larger than the base of your finger
● Measure your knuckle size
● Measure your Ring Size i.e base of the finger
● Pick a size between the Two

A FEW NOTES TO CONSIDER:-


1. Measure your fingers at the end of the day when they’re at their largest.
2. Cold weather can shrink your fingers up to half a size, so make sure they’re warm.
3. Lastly, alcohol and salt can make your fingers swell, so refrain from
measuring them after cocktails and appetizers.

You might also like