Scribd
Upload
222 views1 page

Opel Corsa D Anti Lock Braking System ABS Warning Light Activated 8878

The ABS warning light has activated on Opel Corsa-D models from 2007 displaying error codes C0035 or C0040, which indicate a problem with the front left or right wheel speed sensor. Before replacing the sensors, the ABS sensor ring should be checked for dirt or grease and cleaned with brake cleaner if needed. Cleaning the sensor ring may resolve the issue and prevent unnecessary sensor replacement.

Uploaded by

Mali Rada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
222 views1 page

Opel Corsa D Anti Lock Braking System ABS Warning Light Activated 8878

The ABS warning light has activated on Opel Corsa-D models from 2007 displaying error codes C0035 or C0040, which indicate a problem with the front left or right wheel speed sensor. Before replacing the sensors, the ABS sensor ring should be checked for dirt or grease and cleaned with brake cleaner if needed. Cleaning the sensor ring may resolve the issue and prevent unnecessary sensor replacement.

Uploaded by

Mali Rada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Opel Corsa-D - Anti-lock braking system (ABS)

warning light activated

Opel Corsa-D

Model year: from 2007r

All models

Anti-lock braking system (ABS) warning light activated

Error code C0035 or C0040 issued in the control unit


If the error code C0035 "Front left wheel speed sensor" or C0040 "Front right wheel speed sensor" is
read out from the vehicles above, a possible cause for this could be a soiled ABS sensor ring.

In this case, the following work should be carried out before renewing the sensors.

Remove the ABS sensor


Check the sensor ring for soiling such as grease or dirt particles through the opening in the steering
knuckle
If necessary, clean the ABS sensor ring using a cotton bud immersed in brake cleaner
Dry the components with compressed air

Then check the sensor ring if the cleaning has attained the desired result.

Important safety note Technical information and practical tips have been compiled by HELLA in
order to provide professional support to vehicle workshops in their day-to-day work. The
information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this
document, even in part, is prohibited without our express, written approval and indication of the
source. The schematic illustrations, pictures and descriptions serve only for the purposes of
explanation and representation of the instructions and cannot be used as a basis for installation or
assembly work. All rights reserved.

You might also like