324D/ ®

324D L
Hydraulic Excavator

Engine
Engine Model Cat® C7 with
ACERT™ Technology
Net Flywheel Power 140 kW
Weights
Operating Weight – 24 240 kg
Std. Undercarriage
Operating Weight – 25 560 kg
Long Undercarriage
Engine Hydraulic System

Engine Model Cat C7 with Main Implement System – 235 L/min

ACERT Technology Maximum Flow (2x)
Net Flywheel Power 140 kW Max. Pressure – Equipment 35 000 kPa
Net Power – ISO 9249 140 kW Max. Pressure – Travel 35 000 kPa
Bore 110 mm Max. Pressure – Swing 24 500 kPa
Stroke 127 mm Pilot System – Maximum Flow 32.4 L/min
Displacement 7.2 L Pilot System – Maximum Pressure 3900 kPa
• Net power advertised is the power available at the flywheel Boom Cylinder – Bore 135 mm
when the engine is equipped with fan, air cleaner, muffler Boom Cylinder – Stroke 1305 mm
and alternator. Stick Cylinder – Bore 140 mm
• No engine derating needed up to 2300 m. Stick Cylinder – Stroke 1660 mm
B1 Family Bucket Cylinder – Bore 120 mm
B1 Family Bucket Cylinder – Stroke 1104 mm
Weights CB1 Family Bucket Cylinder – Bore 130 mm
CB1 Family Bucket Cylinder – Stroke 1156 mm
Operating Weight – Std. Undercarriage 24 240 kg
DB Family Bucket Cylinder – Bore 150 mm
Operating Weight – Long Undercarriage 25 560 kg
DB Family Bucket Cylinder – Stroke 1151 mm
3
• Reach boom, R2.95CB1 Stick, 1.0 m Bucket, 600 mm Shoes
3
• Reach boom, R2.95CB1 Stick, 1.1 m Bucket, 800 mm Shoes
Service Refill Capacities

Track Fuel Tank Capacity 520 L

Cooling System 30 L
Standard w/Standard Undercarriage 600 mm Engine Oil 30 L
Standard w/Long Undercarriage 800 mm Swing Drive 10 L
Optional – Triple Grouser 600 mm Final Drive (each) 6L
Optional 700 mm Hydraulic System (including tank) 300 L
Optional – Double Grouser 600 mm Hydraulic Tank 145 L

Swing Mechanism Sound Performance

Swing Speed 9.6 rpm Performance ANSI/SAE J1166
Swing Torque 73.4 kN•m APR 90
• When properly installed and maintained, the cab offered
by Caterpillar, when tested with doors and windows closed
Drive according to ANSI/SAE J1166 OCT 98, meets OSHA and
MSHA requirements for operator sound exposure limits
Maximum Drawbar Pull 227 kN in effect at time of manufacture.
Maximum Travel Speed 5.5 km/h • Hearing protection may be needed when operating with
an open operator station and cab (when not properly
maintained or doors/windows open) for extended periods
or in noisy environment.

Standards

Brakes SAE J1026 APR90

Cab/FOGS SAE J1356 FEB88

14 324D/324D L Hydraulic Excavator specifications

Dimensions
All dimensions are approximate.

2
3

1 9

10

6
7 4
8 5

Boom Options Reach Boom Mass Boom

5.9 m 5.3 m
Stick Options R3.6B1 R2.95CB1 R2.5CB1 M2.5DB M2.0DB
1 Shipping height** 3430 mm 3170 mm 3300 mm 3450 mm 3320 mm
2 Shipping length 10 050 mm 10 060 mm 10 100 mm 9480 mm 9610 mm
3 Tail swing radius 2940 mm 2940 mm 2940 mm 2940 mm 2940 mm
Undercarriage Fixed Gauge Long Fixed Gauge
4 Length to center of rollers 3450 mm 3830 mm
5 Track length 4250 mm 4630 mm
6 Ground clearance*** 470 mm 470 mm
7 Track gauge 2390 mm 2590 mm
8 Track width* 2990 mm 3390 mm
9 Cab height** 2980 mm 2980 mm
10 Counterweight clearance*** 1060 mm 1060 mm

*** Track width shown is for 600 mm track shoes for Fixed Gauge and 800 mm for Long Fixed Gauge.
*** Includes 30 mm shoe lug height.
*** Without 30 mm shoe lug height.

324D/324D L Hydraulic Excavator specifications 15

Reach Excavator Working Ranges Mass Excavator Working Ranges
Reach (R) boom configuration Mass (M) boom configuration

Meters Meters

10 10
➤

➤
9

8 8

7 7
➤

6 6

➤
5 3 5
3
4 4
4
3 3
4

➤
2 2
➤

1 1 5
5

➤➤

➤
➤
➤➤

➤
➤

0 0

➤
➤

➤
➤

➤ ➤ ➤
2
1
2 1
R3.6B1
2 2
R2.95CB1 M2.5DB
7 6
3 R2.5CB1 3 1
7 M2.0DB
4 1 6 4

➤
5 5

➤
➤
6 6
➤

7
➤

7
➤

8 8
11 10 9 8 7 6 5 4 3 2 1 0 1 Meters 11 10 9 8 7 6 5 4 3 2 1 0 1 Meters

Boom Options Reach Boom Mass Boom

Stick Options R3.6B1 R2.95CB1 R2.5CB1 M2.5DB M2.0DB
1 Maximum digging depth 7300 mm 6740 mm 6290 mm 5910 mm 5410 mm
2 Maximum reach at ground level 10 550 mm 10 030 mm 9620 mm 9110 mm 8650 mm
3 Maximum cutting height 9880 mm 9660 mm 9460 mm 9060 mm 8830 mm
4 Maximum loading height 7070 mm 6700 mm 6500 mm 5970 mm 5750 mm
5 Minimum loading height 1910 mm 2470 mm 2930 mm 2360 mm 2860 mm
6 Maximum depth cut for 7140 mm 6560 mm 6080 mm 5720 mm 5190 mm
2240 mm level bottom
7 Maximum vertical wall digging depth 6540 mm 5830 mm 5390 mm 4590 mm 4120 mm
Bucket digging force (SAE) 131 kN 154 kN 154 kN 198 kN 198 kN
(ISO) 149 kN 174 kN 174 kN 222 kN 222 kN
Stick digging force (SAE) 105 kN 118 kN 138 kN 135 kN 154 kN
(ISO) 108 kN 122 kN 143 kN 140 kN 160 kN

16 324D/324D L Hydraulic Excavator specifications

Dimensions
All dimensions are approximate.

2
3

1 9

10

6
7 4
8 5

Boom Options Super Long Reach Boom

10.2 m
Stick Options 7.85 m
1 Shipping height 3150 mm
2 Shipping length 14 340 mm
3 Tail swing radius 3000 mm
4 Length to center of rollers 3830 mm
5 Track length 4630 mm
6 Ground clearance 440 mm
7 Track gauge 2590 mm
8 Transport width
800 mm shoes (standard) 3390 mm
700 mm shoes (optional) 3290 mm
600 mm shoes (optional) 3190 mm
9 Cab height 2980 mm
10 Counterweight clearance 1060 mm

324D/324D L Hydraulic Excavator specifications 17

Reach Excavator Working Ranges
Reach (R) boom configuration

Meters

➤
15

14

➤
13

12

11

10

7 3
6
4
5

➤➤
1
5
➤
➤➤
➤

1
2
2
10.2 m
3

7 16
8

10

11

12

13
➤

14
➤

19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1 2 Meters

Boom Options Super Long Reach Boom

10.2 m
Stick Options 7.85 m
Bucket Options DC 0.61 m3
1 Maximum digging depth 14 594 mm
2 Maximum reach at ground level 18 603 mm
3 Maximum cutting height 15 411 mm
4 Maximum loading height 13 285 mm
5 Minimum loading height 1483 mm
6 Maximum vertical wall digging depth 13 922 mm

18 324D/324D L Hydraulic Excavator specifications

Major Component Weights

kg
Base machine with counterweight and 800 mm shoes (without front linkage) With 600 mm shoe 19 450
With 800 mm shoe 20 740
Two boom cylinders (each) 227
Counterweight
Non-removal type 4520
Boom (includes lines, pins and stick cylinder)
Reach boom 2033
Mass boom 2138
Stick (includes lines, pins, bucket cylinder and linkage)
R3.6B1 1199
R2.95CB1 1208
R2.5CB1 1149
M2.5DB 1470
M2.0DB 1385
Track roller frame [includes frame, rollers, idlers, steps, guards, With 600 mm shoe 7950
final drive, 800 mm shoes] – each With 800 mm shoe 9240

324D Bucket Specifications and Compatibility

Capacity* Width Tip Weight Teeth Total Reach Mass
Radius (w/o tips) Weight Stick Stick
m3 mm mm kg Qty kg R3.6B1 R2.95CB1 R2.5CB1 M2.5DB M2.0DB
B1 Buckets
Excavation 0.9 1092 1488 647 5 647 s s s — —
CB1 Buckets
Excavation 1.0 1232 1555 822 5 822 n s s — —
1.1 1320 1555 857 5 857 * n n — —
1.2 1420 1555 896 5 896 * * n — —
DB Buckets
Excavation 1.4 1472 1660 1124 5 1124 — — — * s
1.5 1559 1660 1167 5 1167 — — — * n

324D L Bucket Specifications and Compatibility

Capacity* Width Tip Weight Teeth Total Reach Mass
Radius (w/o tips) Weight Stick Stick
m3 mm mm kg Qty kg R3.6B1 R2.95CB1 R2.5CB1 M2.5DB M2.0DB
B1 Buckets
Excavation 0.9 1092 1488 647 5 647 s s s — —
CB1 Buckets
Excavation 1.0 1232 1555 822 5 822 s s s — —
1.1 1320 1555 857 5 857 n s s — —
1.2 1420 1555 896 5 896 n n s — —
DB Buckets
Excavation 1.4 1472 1660 1124 5 1124 — — — n s
1.5 1559 1660 1167 5 1167 — — — n n
Assumptions for maximum material density rating: s 2100 kg/m3 max material density
1. Front linkage fully extended at ground line n 1800 kg/m3 max material density
2. Bucket curled * 1500 kg/m3 max material density
3. 100% bucket fill factor ∴ 1200 kg/m3 max material density
* Based on SAE J296, some calculations of capacity specs fall on borderlines. Rounding may — Not Available
allow two buckets to have the same English rating, but different metric ratings.

324D/324D L Hydraulic Excavator specifications 19

324D/324D L Work Tool Matching Guide

Boom Options Reach Boom Mass Boom

5.9 m 5.3 m
Stick Options R3.6CB R2.95CB R2.5CB M2.5DB M2.0DB
Hydraulic Hammer H115Cs/ H115Cs/ H115Cs/ H115Cs/ H115Cs/
H120Cs/ H120Cs/ H120Cs/ H120Cs/ H120Cs/
H130Ds H130Ds H130Ds H130Ds H130Ds
Vibratory Plate Compactor CVP110 CVP110 CVP110 CVP110 CVP110
Multi-Processor MP20 MP20 MP20 n/a n/a
360 Scrap Shear S320 S320 S320 n/a n/a
Trash Grapple 2.7 m3 2.7 m3 2.7 m3 3.1 m3 3.1 m3
Contractors’ Grapple yes yes yes n/a n/a
Hydraulic Thumb yes yes yes n/a n/a
Dedicated Quick Coupler yes yes yes yes yes
Pin-Grabber Quick Coupler yes yes yes yes yes

20 324D/324D L Hydraulic Excavator specifications

Reach Boom Lift Capacities
Load Point Load Radius Load Radius Load at
Height Over Front Over Side Maximum Reach

R2.95B1 STICK – 2950 mm UNDERCARRIAGE – Long BOOM – 5900 mm

BUCKET – 1.1 m3 SHOES – 600 mm triple grouser

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m

7.5 m kg *2900 *2900 8.12

6.0 m kg *4900 4100 *2850 *2850 9.04
4.5 m kg *6250 6050 *5700 4050 *2900 2550 9.58
3.0 m kg *9650 9100 *7350 5700 6200 3900 *3050 2350 9.81
1.5 m kg *11 850 8350 *8550 5350 6000 3700 *3300 2300 9.76
Ground
Line kg *5500 *5500 *13 150 7900 8350 5100 5850 3550 *3700 2400 9.43
–1.5 m kg *5700 *5700 *9450 *9450 *13 350 7750 8200 4950 5750 3500 *4400 2700 8.80
–3.0 m kg *10 000 *10 000 *14 850 *14 850 *12 600 7800 8250 4950 5550 3400 7.77
–4.5 m kg *15 050 *15 050 *10 700 8050 *7600 5150 *5350 5150 6.16

* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.

R2.5B1 STICK – 2500 mm UNDERCARRIAGE – Long BOOM – 5.9 m

BUCKET – 1.2 m3 SHOES – 600 mm triple grouser

3.0 m 4.5 m 6.0 m 7.5 m

7.5 m kg *5800 *5800 *4000 *4000 7.60

6.0 m kg *5950 *5950 *3900 3200 8.59
4.5 m kg *8050 *8050 *6700 5950 *6050 3950 *3950 2750 9.16
3.0 m kg *10 400 8900 *7800 5600 6150 3850 *4150 2550 9.40
1.5 m kg *12 400 8150 8600 5250 5950 3700 4100 2500 9.35
Ground
Line kg *13 300 7800 8350 5050 5800 3550 4350 2600 9.00
–1.5 m kg *9900 *9900 *13 200 7750 8250 4950 5800 3500 4950 3000 8.33
–3.0 m kg *16 300 16 250 *12 150 7850 8300 5000 *5500 3900 7.22
–4.5 m kg *13 400 *13 400 *9750 8200 *7350 5750 5.64

* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.

R2.95B1 STICK – 2950 mm UNDERCARRIAGE – Standard BOOM – 5900 mm

BUCKET – 1 m3 SHOES – 600 mm triple grouser

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m

7.5 m kg *2950 *2950 8.12

6.0 m kg *4950 3650 *2850 2600 9.04
4.5 m kg *6250 5400 5350 3600 *2900 2250 9.58
3.0 m kg *9650 8050 *7400 5050 5200 3450 *3050 2050 9.81
1.5 m kg 11 650 7300 7250 4700 5000 3250 3200 2000 9.76
Ground
Line kg *5500 *5500 11 150 6900 6950 4450 4850 3100 3350 2100 9.43
–1.5 m kg *5750 *5750 *9450 *9450 10 950 6750 6800 4350 4800 3050 3750 2350 8.80
–3.0 m kg *10 050 *10 050 *14 850 13 700 11 050 6800 6850 4350 4650 3000 7.77
–4.5 m kg *15 050 14 200 *10 700 7050 7000 4500 *5400 4550 6.16

* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

324D/324D L Hydraulic Excavator specifications 21

Mass Boom Lift Capacities
Load Point Load Radius Load Radius Load at
Height Over Front Over Side Maximum Reach

M2.5DB STICK – 2500 mm UNDERCARRIAGE – Long BOOM – 5300 mm

BUCKET – 1.4 m3 SHOES – 600 mm triple grouser

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m

7.5 m kg *3500 *3500 6.95

6.0 m kg *6000 5900 *3300 *3300 8.05
4.5 m kg *6500 5750 *4700 3650 *3300 2800 8.66
3.0 m kg *9600 8950 *7500 5450 5850 3550 *3500 2550 8.92
1.5 m kg *11 700 8150 8450 5100 5700 3400 *3800 2500 8.87
Ground
Line kg *8550 *8550 *12 900 7700 8200 4850 5600 3300 *4350 2650 8.49
–1.5 m kg *7950 *7950 *14 200 *14 200 *12 950 7550 8050 4750 *5300 3150 7.75
–3.0 m kg *14 250 *14 250 *17 000 16 050 *11 700 7700 8150 4850 *5850 4450 6.50
–4.5 m kg *8200 8150 *7450 7450 4.76

* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.

Super Long Reach Boom Lift Capacities

➤

Load Point Load Radius ➤

➤
Load Radius Load at Maximum
➤

Height Over Front Over Side Reach – Bucket Curled

BOOM – 10.2 m BUCKET – 1142 mm SHOES – 800 mm triple grouser

STICK – 7.85 m 0.60 m3 UNDERCARRIAGE – Long
291 kg HEAVY LIFT – On

6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m

➤

➤
➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤
➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤

m
➤

12.0 m kg *980 *980 15.24

10.5 m kg *1630 *1630 *1710 *1710 *930 *930 16.16
9.0 m kg *1610 *1610 *1680 *1680 *900 *900 16.89
7.5 m kg *1730 *1730 *1710 *1710 *870 *870 17.01
6.0 m kg *1820 *1820 *1790 1680 *870 *870 17.62
4.5 m kg *2070 *2070 *1960 *1960 *1890 1600 *880 *880 17.99
3.0 m kg *2860 *2860 *2530 *2530 *2300 *2300 *2130 1910 *2010 1510 *910 880 18.22
1.5 m kg *5290 *5290 *4060 *4060 *3330 *3330 *2860 2820 *2540 2230 *2300 1780 *2140 1420 *930 860 18.32
Ground
Line kg *6250 5670 *4690 4220 *3770 3260 *3180 2580 *2770 2060 *2480 1660 *2270 1330 *950 850 18.28
–1.5 m kg *6950 5140 *5220 3830 *4160 2980 *3470 2370 *2990 1910 *2650 1550 2240 1260 *1000 860 18.12
–3.0 m kg *7400 4820 *5600 3570 *4470 2770 *3710 2210 3090 1790 2580 1460 2180 1200 *1080 890 17.82
–4.5 m kg *7650 4670 *5850 3410 4550 2640 3650 2100 3000 1710 2520 1400 2140 1160 *1180 960 17.36
–6.0 m kg *7710 4630 5840 3340 4480 2570 3590 2040 2950 1660 2480 1370 2130 1150 *1310 1090 16.74
–7.5 m kg *7600 4670 5850 3350 4460 2550 3570 2030 2950 1650 2490 1380 2160 1180 *1500 1230 15.94
–9.0 m kg *7310 4800 *5780 3420 4510 2600 3610 2060 2990 1690 2550 1440 *1770 1480 14.92
–10.5 m kg *6800 4990 *5420 3550 *4430 2710 *3670 2160 *3010 1800 *2200 1870 13.63
–12.0 m kg *5970 5280 *4780 3770 *3870 2890 *3090 2350 *2590 *1930 11.96
–12.0 m kg *4620 *4620 *3630 *3630 *2700 *2700

* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

22 324D/324D L Hydraulic Excavator specifications

Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for details.

Upper Structure Operator Station

Electrical Cab
Alternator, 80A Adjustable armrest
Light, storage box mounted (one) Ashtray with lighter
Signaling/Warning horn Beverage holder
Engine Bi-Level air conditioner (automatic) with defroster
Cat C7 with ACERT Technology Bolt-on FOGS capability
2300 m altitude capability with no deration Capability of installing two additional pedals
Air intake heater Coat hook
Automatic engine speed control Front windshield glass split 70/30
Radial seal air filter Interior lighting
Water separator in fuel line Literature holder
Waved fin radiator with space for cleaning Mounting for two stereo speakers (two locations)
2 micron fuel filter Neutral lever (lock out) for all controls
Automatic swing parking brake Openable front windshield with assist device
Boom drift reducing valve Openable skylight
Boom lowering device for back-up Pillar mounted upper windshield wiper and washer
Caterpillar one key security system Pressurized cab (positive filtered ventilation)
Counterweight Radio mounting (DIN size)
Door locks and cap locks Rear window, emergency exit
Mirrors, rearview (frame-right, cab-left) Removable lower windshield with in-cab storage bracket
Regeneration circuit for boom and stick Seat with integrated, adjustable console
Reverse swing damping valve Seat belt, retractable (50.8 mm width)
Stick drift reducing valve Sliding upper door window
Two speed travel Storage compartment suitable for lunch box
Travel control pedals with removable hand levers
Utility space for magazine
Washable floor mat
Monitor
Economy mode
Full time clock
Language display – Full color and graphical display
Machine condition, error code and tool mode setting
Start-up level check for hydraulic oil, engine oil and coolant
Warning information, filter/fluid change information
and working hour
Undercarriage
Grease lubricated GLT2, resin seal
Idler and center section track guiding
800 mm triple grouser track shoe (324D L)
600 mm triple grouser track shoes (324D)

324D/324D L Hydraulic Excavator specifications 23

Optional Equipment
Optional equipment may vary. Consult your Caterpillar dealer for details.

Front Linkage Auxiliary Hydraulics and Lines

Bucket linkage, B1-family with lifting eye Additional circuit
Bucket linkage, CB1-family with lifting eye Hammer return filter circuit
Bucket linkage, DB-family with lifting eye Boom and stick lines
Heavy-duty 5.9 m reach boom (with left and right side light) Cat quick coupler line (high and medium pressure capable)
Heavy-duty 2.95 m stick for heavy-duty reach boom Drain line
Reach boom 5.9 m with left and right side light High pressure line
R3.6B1 3600 mm stick Medium pressure line
R2.95CB1 2950 mm stick Quick coupler
R2.5CB1 2500 mm stick Quick coupler for high pressure
Mass boom 5.3 m with left and right side light Tool control system
M2.5DB 2500 mm stick Configuration 1 (hammer 1), foot pedal operated 1P,
M2.0DB 3200 mm stick one-way circuit
Track Configuration 2 (common), foot pedals operated 1/2P,
Standard undercarriage common circuit
700 mm triple grouser shoes Configuration 3 (hammer 2), foot pedal operated 2P,
800 mm triple grouser shoes one-way circuit
Long Undercarriage Operator Station
600 mm triple grouser shoes Tempered glass windows
700 mm triple grouser shoes Polycarbonate windows
Guards Power supply, 12V-7A (1)
FOGS, bolt-on Power supply, 12V-7A (2)
Guard, cab front Rear window emergency exit
Guard, cab top Seat, high-back air suspension
Guard, full length for long undercarriage (two piece) Seat, high-back air suspension with heater
Guard, heavy-duty bottom, 4 mm, with out swivel Seat, high-back mechanical suspension
guard and travel motor protection Seat, low-back suspension without headrest
Guard, track end guide for long undercarriage Headrest
Guard, track end guide for standard undercarriage Sunscreen
Guard, vandalism Windshield wiper, lower with washer
Heavy-duty swivel protection, 16 mm, swivel guard only Working lights, cab mounted
Heavy-duty travel motor protection Rain protector for front windshield
Net for front guard (full net, one piece) Sun visor
Net for front guard (half net, one piece) AM/FM radio
Swivel protection, 6 mm, swivel guard only Control pattern quick-changer, two way
Control pattern quick-changer, four way
Cat MSS (anti-theft device)
Lunch box with cover
Water level indicator for water separator
Other Optional Equipment
Additional gear train for auxiliary pump
Air pre-filter
Cooling package, high ambient with VSF
Cooling package, semi-high ambient
Electric refueling pump with auto shut off
Fine swing
Starting kit, cold weather, –32° C
Travel alarm

24 324D/324D L Hydraulic Excavator specifications