Scribd
Upload
154 views1 page

PDS Bohler N ER 316 L

This document summarizes the specifications of Bohler N ER 316L welding rod, a high alloy chemical resistant rod. It has an AWS A5.9 and EN ISO 12072 classification of ER316L and W 19 12 3 L. The rod creates a weld deposit with high purity, superior hot cracking resistance, and corrosion resistance up to 400°C. It also has good toughness down to -196°C. The rod contains chromium, molybdenum, and nickel and has mechanical properties including a minimum yield strength of 400 MPa and tensile strength of 580 MPa. It is packaged in 5kg plastic tubes within 20kg corrugated boxes.

Uploaded by

kamals55
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
154 views1 page

PDS Bohler N ER 316 L

This document summarizes the specifications of Bohler N ER 316L welding rod, a high alloy chemical resistant rod. It has an AWS A5.9 and EN ISO 12072 classification of ER316L and W 19 12 3 L. The rod creates a weld deposit with high purity, superior hot cracking resistance, and corrosion resistance up to 400°C. It also has good toughness down to -196°C. The rod contains chromium, molybdenum, and nickel and has mechanical properties including a minimum yield strength of 400 MPa and tensile strength of 580 MPa. It is packaged in 5kg plastic tubes within 20kg corrugated boxes.

Uploaded by

kamals55
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BOHLER N ER 316L

GTAW rod, high alloyed chemical resistant

Classification
AWS A5.9 EN ISO 12072
ER316L W 19 12 3 L
Features & Benefits
 Bohler N ER 316L rod of type W 19 12 3 L / ER316L engineered to a very precise analysis
to create a weld deposit of high purity, superior hot cracking and corrosion resistance.
 CVN toughness down to -196 °C, resistant to intergranular corrosion up to +400 °C.
Typical analysis (wt. - %), As Welded
C Si Mn P S Cr Mo Ni
0.018 0.37 1.58 0.022 0.013 18.37 2.65 11.37
Mechanical properties of all-weld metal
Yield Tensile Elongati
Heat treatment on Impact Strength -
strength strength FN
condition J
(L0=5d0)
MPa MPa % + 20°C -196°C WRC-92
As Welded ≥ 400 ≥580 ≥ 30 ≥ 100 ≥ 32 4-8
Position Polarity Size & Packaging
Size
ø mm - 1.6, 2.0, 2.4, 3.2
Packaging
5Kg Plastic Tubes in 20Kgs
Corrugated Box

shielding gases:
100% Argon
rod marking:
front:
back: N ER 309 L

All information provided is based upon careful investigation and intensive research. 03/2014
However, we do not assume any liability for correctness and information is subject to change without notice. www.voestalpine.com/welding

You might also like