Eagle Hills Ethiopia One Lagare Floor Plan
Eagle Hills Ethiopia One Lagare Floor Plan
A=49.1 m2
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
TERRACE AND BALCONY
A=49.2 m2
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
TERRACE AND BALCONY
A=71.7 m2
CORRIDOR
A=4.3 m2
SUITE AREA 106.7m2 / 1148.5ft2 M BATH ROOM
A=5.3 m2
BATH ROOM
LIVING + DINING
A=4.5 m2
A=30.1 m2
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
KITCHEN
A=9.9 m2
304E
UNIT NO. BED ROOM 2
A=12.1 m2
MASTER BED ROOM
A=18.3 m2
304E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
KITCHEN
A=9.9 m2
M BATH ROOM
A=5.3 m2
CORRIDOR
A=4.3 m2
308W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
TERRACE AND BALCONY
A=71.5 m2
CORRIDOR
A=4.3 m2
SUITE AREA 106.9m2 / 1150.7ft2 M BATH ROOM
A=5.3 m2
BATH ROOM LIVING + DINING
A=4.5 m2 A=30.1 m2
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
MASTER BED ROOM BED ROOM 2
A=19.3 m2 A=14.9 m2
M BATH ROOM
A=5.0 m2
CORRIDOR
301E BATH ROOM A=6.7 m2
UNIT NO. A=4.3 m2
BED ROOM 3
A=12.2 m2
BATH MAIDS
ROOM ROOM
BALCONY AND 35.4m² / 381ft² A=2.7 m2 A=3.3m2
POWDER
TERRACE AREA ROOM
A=2.9 m2 TERRACE AND BALCONY
A=35.4 m2
301E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
LIVING + DINING
A=39.5 m2
POWDER
ROOM
BATH MAIDS A=2.9 m2
ROOM ROOM
A=2.7 m2 A=3.3 m2
KITCHEN
A=6.4 m2
BED ROOM 3
BATH ROOM CORRIDOR A=12.2 m2
A=4.3 m2 A=6.7 m2
302E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
LIVING + DINING
A=39.5 m2
POWDER
BALCONY ROOM
A=8.3 m2 A=2.9 m2
MAIDS BATH
ROOM ROOM
A=3.3 m A=2.7 m2
2
KITCHEN
A=6.4 m2
310W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
TERRACE
A=33.6m2
CORRIDOR
BED ROOM 3 BATH ROOM
A=6.7 m2
A=12.2 m2 A=4.3 m2
SUITE AREA 151.2m2 / 1,627.5ft2
KITCHEN
TERRACE AREA
MAIDS BATH
ROOM ROOM
POWDER
TOTAL AREA 184.8m / 1989.2ft
2 2 BALCONY
A=8.3 m2
ROOM
A=3.3 m2 A=2.7 m2
A=2.9 m2
LIVING + DINING
A=39.5 m2
311W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
KITCHEN
A=9.3 m2
M BATH ROOM
A=7.0 m2
306W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BALCONY
A=5.7 m2
405E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BALCONY
A=5.7 m2
SUITE AREA
73.2m2 / 787.9ft2
KITCHEN
A=6.6 m2
BALCONY AREA
5.6m² / 60.2ft²
TOTAL AREA
78.8m2 / 848.1ft2
407W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BALCONY
A=5.5 m2
KITCHEN
A=9.9 m2
403E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
KITCHEN
A=9.9 m2
BALCONY
A=5.5 m2
BALCONY AREA 5.5m² / 59.2ft²
404E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
KITCHEN
A=9.9 m2
BALCONY
A=5.5 m2
408W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BALCONY
A=5.5 m2
409W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
MASTER BED ROOM BED ROOM 2
A=19.3 m2 A=14.9 m2
M BATH ROOM
A=5.0 m2
1501E
BATH MAIDS
ROOM ROOM
BALCONY AREA 7.9m² / 85ft² A=2.7 m2 A=3.3 m2 POWDER
ROOM BALCONY
A=2.9 m2 A=7.9 m2
401E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
LIVING + DINING
A=39.5m2
POWDER
BALCONY
ROOM
A=8.7 m2
A=2.9 m2
BATH MAIDS
ROOM ROOM
A=2.7 m2 A=3.3 m2
KITCHEN
A=6.4 m2
1502E
402E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
LIVING + DINING
A=39.5m2
POWDER
BALCONY ROOM
A=8.5 m2 A=2.9 m2 MAIDS BATH
ROOM ROOM
A=3.3 m2 A=2.7 m2
KITCHEN
A=6.4 m2
1410W, 1510W
410W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BED ROOM 2 MASTER BED ROOM
A=14.9 m2 A=19.3 m2
M BATH ROOM
A=5.0 m2
1511W
KITCHEN
SUITE AREA 151.2m / 1,627.5ft
2 2
A=6.4 m2
MAIDS BATH
ROOM ROOM
BALCONY ROOM
A=8.4 m2 A=2.9 m2
411W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
KITCHEN
A=9.3 m2
M BATH ROOM
THREE BEDROOM TYPE 3-2.a A=7.0 m2
BALCONY BALCONY
TOTAL AREA A=5.8 m2 A=5.8 m2
163m2 / 1,754.5ft2
406W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BALCONY
A=6.0 m2
CORRIDOR
DREESING ROOM A=10.5 m2
A=4.3 m2
THREE BEDROOM TYPE 3-3.a
BATH ROOM
A=4.8 m2 POWDER
1603E, 1703E, 1803E, ROOM
M BATH ROOM
UNIT NO. 1903E A=5.7 m2 A=2.7 m2
LIVING + DINING
A=45.1 m2
1603E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BATH MAIDS
ROOM ROOM
A=3.3 m2 A=4.5 m2
KITCHEN
A=9.8 m2
LIVING + DINING
THREE BEDROOM TYPE 3-3.b A=45.1 m2
POWDER
ROOM
M BATH ROOM A=2.7 m2
1604E, 1704E, 1804E, A=5.7 m2 BATH ROOM
UNIT NO. 1904E A=4.8 m2
DREESING ROOM
A=4.3 m2 CORRIDOR
SUITE AREA 164.1m2 / 1,766.3ft2 A=10.5 m2
BALCONY
A=5.8 m2
1604E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BATH MAIDS
ROOM ROOM
A=3.3 m2 A=4.5 m2
KITCHEN
A=9.8 m2
LIVING + DINING
THREE BEDROOM TYPE 3-3.c A=45.1 m2
M BATH ROOM
CORRIDOR A=5.7 m2
SUITE AREA 164.3m2 / 1,768.5ft2 A=10.5 m2
BALCONY
A=5.9 m2
1606W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BALCONY
A=5.9 m2
CORRIDOR
A=10.5 m2 DREESING ROOM
A=4.3 m2
THREE BEDROOM TYPE 3-3.d BATH ROOM
A=4.8 m2
1605W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
MASTER BED ROOM BED ROOM 2 BED ROOM 3
A=20.8 m2 A=12.5 m2 A=16.6 m2
CORRIDOR
M BATH ROOM A=8.5 m2
A=6.1 m2
BATH ROOM
A=5.2 m2
FOUR BEDROOM TYPE 4-1. a
BEDROOM 4
A=12.7 m2
1601E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
LIVING + DINING
A=42.7 m2
BATH POWDER
ROOM ROOM
MAIDS BALCONY
A=2.7 m2 A=2.9 m2
ROOM A=8.9 m2
A=3.3 m2
KITCHEN
A=9.2 m2
M BATH ROOM
A=6.1 m2 CORRIDOR
A=8.5 m2
SUITE AREA 180.9m2 / 1,947.1ft2
1602E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
LIVING + DINING
A=42.7 m2
POWDER
BALCONY ROOM MAIDS BATH
A=8.9 m2 A=2.9 m2 ROOM ROOM
A=3.3 m A=2.7 m2
2
KITCHEN
A=9.2 m2
M BATH ROOM
A=6.1 m2
CORRIDOR
A=8.5 m2
SUITE AREA 181.1m2 / 1,949.3ft2
1608W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BED ROOM 3 BED ROOM 2 MASTER BED ROOM
A=16.6 m2 A=12.5 m2 A=20.8 m2
CORRIDOR
A=8.5 m2 M BATH ROOM
A=6.1 m2
BATH ROOM
A=5.2 m2
FOUR BEDROOM TYPE 4-1. d
BEDROOM 4
A=12.7 m2
1607W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
MASTER BED ROOM BED ROOM 2 BED ROOM 3 TERRACE AND BALCONY
A=13.0 m2 A=12.5 m2 A=15.4 m2 A=66.2 m2
KITCHEN
BALCONY & A=9.8 m2
BATH MAIDS
TOTAL AREA 232.3m / 2,500.5ft
2 2
ROOM ROOM
A=3.3 m2 A=4.5 m2
2003E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BATH MAIDS
ROOM ROOM
A=3.3 m2 A=4.5 m2
2004E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BATH MAIDS
ROOM ROOM
A=3.3 m2 A=4.5 m2
KITCHEN
A=9.8 m2
LIVING + DINING
THREE BEDROOM TYPE 3-3.c A=45.1 m2
M BATH ROOM
CORRIDOR A=5.7 m2
SUITE AREA 164.4m2 / 1,769.5ft2 A=10.5 m2
BALCONY
A=5.9 m2
2006W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BALCONY
A=5.9 m2
CORRIDOR
A=10.5 m2 DREESING ROOM
A=4.3 m2
THREE BEDROOM TYPE 3-3.d BATH ROOM
A=4.8 m2
2005W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BED ROOM 3 BED ROOM 2 MASTER BED ROOM
A=16.6 m2 A=12.5 m2 A=20.8 m2
CORRIDOR
A=8.5 m2 M BATH ROOM
A=6.1 m2
BATH ROOM
A=5.2 m2
FOUR BEDROOM TYPE 4-1. d
BEDROOM 4
A=12.7 m2
2007W, 2107W
UNIT NO. KITCHEN
A=9.2 m2
2007W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
LIVING + DINING
A=42.7 m2
POWDER
BALCONY ROOM MAIDS BATH
A=8.9 m2 A=2.9 m2 ROOM ROOM
A=3.3 m A=2.7 m2
2
KITCHEN
A=9.2 m2
M BATH ROOM
A=6.1 m2
CORRIDOR
A=8.5 m2
SUITE AREA 180.2m² / 1,939.6ft²
2008W
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BALCONY
A=21.9 m2
CORRIDOR
DREESING ROOM A=10.5 m2
A=4.3 m2
THREE BEDROOM TYPE 3-3.a
BATH ROOM
A=4.8 m2 POWDER
2103E M BATH ROOM ROOM
UNIT NO. A=5.7 m2 A=2.7 m2
LIVING + DINING
A=45.1 m2
BALCONY &
TERRACE AREA 21.9m² / 235.7ft² BATH MAIDS
ROOM ROOM
A=3.3 m2 A=4.5 m2
2103E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.
BATH MAIDS
ROOM ROOM
A=3.3 m2 A=4.5 m2
KITCHEN
A=9.8 m2
LIVING + DINING
THREE BEDROOM TYPE 3-3.b A=45.1 m2
POWDER
ROOM
M BATH ROOM A=2.7 m2
2104E A=5.7 m2 BATH ROOM
UNIT NO. A=4.8 m2
DREESING ROOM
A=4.3 m2 CORRIDOR
SUITE AREA 164.8m2 / 1,773.9ft2 A=10.5 m2
BALCONY
A=21.9 m2
2104E
Disclaimer:
1. All room dimensions are measured to structural elements and exclude all finishes and construction tolerances. 2. All dimensions have been provided by our consultant architects. 3. All
materials, dimensions and drawings are approximate. Information is subject to change without notice. 4. Actual suite area may vary from the stated area. Drawings not to scale. The developer
reserves the right to make revisions. 5. Calculation of suite area is measured as the area bounded by the centre line of the demising or partition walls separating one unit from another unit,
the exterior face of all exterior walls, and the exterior face of the corridor wall enclosing the adjoining unit. 6. Calculation of balcony area is measured as the area bounded by the centre
line of the demising or partition walls separating one unit from another unit, the out most face of the enclosing guard and the external face of the unit adjoining the balcony. 7. The units are
measured at typical floor in the building. Columns may vary in size depending on the floor level.