JOINT S TOCK COMP ANY “FED”

FED HISTORY

MiG-23, MiG-25, MiG-27, An-158, An-178, An-132

MiG-29, MiG-31 L-15
Ty-4, Ty-95, Ty-104, Su-24, Su-27, Su-30 DART-450
Ty-126, Ty-134, Ty-154 Ty-22M, Ty-26, Ty-144, Su-33, Su-35, Su-37 UAV
Su-7, Su-9, Su-15, Su-17 Ty-160 Ty-214, Ty-234,  SPACE SATELLITES
MiG-15, MiG-17, MiG-19, An-24, An-26, An-30, Ty-334  ROCKET
An-124, An-225 An-72, An-74,  ROCKET ENGINE
1927 MiG-21
Il-86, Il-96 An-140, An-148  ENGINES:
An-24, An-26, An-30
YaK-42 - SP12, SU15
“FED” Il-76
Ka-27, Ka-28, Ka-29,
YaK-130
Ka-50, Ka-52, - D436-148, D-27, D18T
La-5, La-7 Mi-2, Mi-4
was founded Il-12, Il-14 YaK-40 Ka-30, Ka-31 Ka-226 - AI-450, AI-322, AI322F
 ARTILLERY  ROCKET ENGINE Mi-8, Mi-14, Mi-7, Mi-24,  TANKS T-80 - TV3-117VMA-SBM1V
 SNIPER RIFLES  SUBMARINE Mi-28  ROCKET - MS-400, MS-500

1927 - 1939 1940 - 1949 1950 - 1969 1970 - 1989 1990 - 2009 2010 - 2020
 POWER DRIVE UNITS
 ELECTRIC  FUEL PUMPS  PUMPING STATIONS  INTEGRATED DRIVE  INTEGRATED DRIVE
 PANORAMIC SIGHTS  FUEL AND GENERATORS  ACTUATORS (EHSA,
DRILLS GENERATORS
 TRENCH PERISCOPES HYDRAULIC PUMPS  PUMPING STATIONS EHA, EBHA, EM)
 PORTABLE  PUMPING STATIONS
FILM  BREECH SIGHTS  HYDRAULIC MOTORS  FUEL AND  FUEL AND HYDRAULIC  ENGINE CONTROL
CAMERAS  FUEL CONTROL UNITS HYDRAULIC PUMPS PUMPS AND FUEL SYSTEMS
 FOTO CAMERAS  HYDRAULIC MOTORS  ELECTRIC AND  INTEGRATED DRIVE
“FED” SERIES  FUEL CONTROL HYDRAULIC MOTORS GENERATORS
UNITS  FUEL CONTROL UNITS  HYDRAULIC PUMPS
 FOTO CAMERAS  PLUNGER PUMPS  HYDRAULIC AND
“FED” SERIES  TERMOSENSORS ELECTRIC MOTORS
 HYDARAULIC
 SERVOVALVES,
ACTUATORS
SOLENOID VALVES
 ENSORS (LVDT, RVDT)
 RESERVOIRS
CAPABILITIES

 Today JSC “FED” is the leading enterprise of Ukraine in

research and development, serially produced,
maintenance and overhaul more than 1300 types of the
aircrafts, helicopters, UAV and space units:

 At present time aviation units are used on engines

D436-148, D-27, D18T, AI-450, AI-322, TV3-117VMA-SBM1V,
MS-400, MS-500 and them modification, work successfully
on aircraft brands “Su”, “MiG”, “An”,“Tu”, “YaK”, “Be”, “Il”
helicopter brands “Mi”, “Ka”
 MANAGEMENT ORGANIZATIONAL STRUCTURE OF JSC "FED"
Chairman of the Board

1-st deputy Deputy Chairman of the Deputy Chairman of Deputy Deputy Deputy Chairman of the Deputy Chairman Chief
Chairman of the Board of Marketing the Board of Chairman of Chairman of the Board of Administrative of the Board for Accountant
board – deputy and technological Production the Board of Board for and Economic Affairs Organizational
Chairman of the development Quality Foreign Issues of the
Board of Commerce Economic PJSC "FED"
and Procurement Relations Representative
Office in Kyiv
Management of procurement and external cooperation

Research Department of Fine Technologies

Management of quality and certification

Project and Program Management

Mechanical assembly production

Office of the Chief Power Engineer

Technical control department
Office of the Chief Designer

Production management
Technical management

Maintenance department
Repair production

Accounting
Warehouse

Checkpoint
Chancery
 EXPENSES AND INCOME OF JSC "FED"
Structure of fixed assets of
JSC "FED" in 2021 Enterprise turnover, EVRO, million
140
160
3% 8% 12% 120

100
130
77% 80

60
94 100
40

20

0
2018
2015 2019
2016 2020
2017 2021
2018
 STAFF OF OUR COMPANY
Academic Doctor of Engineering Professor Docent
5 4 3 3

Number of staff
1000
900 921

Structure of the personnel 800

structure of employees, % 700 719

600 546

500
402
400 325
41 15 44
300
200
0 20 40 60 80 100
Basic Workers 100
Auxiliary workers 0 1917 1918 1919 1920 2021
Engineering staff and employees
PJSC "FED"
FED PRODUCTION

 Production area ~ 8000 m²

• Turning
• Milling
• Electro-erosion
• Surface grinding
• Circular grinding
• Honing processing
• High-precision finishing of spheres and planes
• Welding: argon-arc, spot, laser, electron-beam,
diffusion
• Heat treatment, nitriding, etc.

 Assembly shop area ~ 3000 m²

• Clean room for assembling high quality components
• Painting

 Test facilities area ~ 2900 m²

• Functional, acceptance and life tests of all type
manufactured products
• Climatic, vibration, shock, etc.
 QUALITY MANAGEMENT SYSTEM

Quality management system requirements for international standards

AS/EN 9100-2009, BS EN ISO 9001-2015 EN 9100:2018, PART-145
certified as an aviation technology developer
 FED PRODUCTS FOR AIRCRAFTS AND HELICOPTERS
FIXED AND VARIABLE DISPLACEMENT AXIAL PISTON PUMPS
CENTRIFUGAL AND GEAR PUMPS
MiG-15
MiG-17
MiG-19
MiG-21
MiG-23
MiG-25
DTSN78N MiG-29
DTSN42
NT40M Su-7
MiG-29 Su-9
Su-15
Su-17
Su-24
Su-27
An-70
An-148
An-158
NT4 NR400E NP107
An-178
NP134 GNT NP130-2 NP138 An-124
An-225
Ty-142M
ANSAT
Flow rate from 2 to 200 l/min at pressures up to 38 MPa
 FED PRODUCTS FOR AIRCRAFTS
HYDRAULIC MOTORS

MiG-17
MiG-19
MiG-23
NM9 D1V-03 Ty-160 MiG-23
Ty-22
Ty-160

Torque on the shaft from 2 to 150 Nm

NM11-27 NM11-27SV NM15

 FED PRODUCTS FOR AIRCRAFTS
ACTUATORS (EHSA, EHA, EBHA, EM)

АRP-21N КPМ148N АRM-19N Yak-130

Yak-130 Yak-42
An-70
An-148
An-158
An-178

АR-20N АR-30N
АRP-20N АR-10N

Force of up to 160 kN and

rotational action with the
torque on the shaft up to
220 Nm
РМ-140
АRM150
An-70
 FED PRODUCTS FOR AIRCRAFTS AND HELICOPTERS
ELECTRIC MOTOR DRIVEN PUMPS (AC and DC)

MiG-17
MiG-19
MiG-21
MiG-23
Ka-27
Ka-29
Ka-50
Аn-158 Ka-52
NS75 NSRT Mi-8
ANSAT
An-140
Pressure up to 28 MPa An-148
and feed from 2 to 120 l/min An-158
An-178

NS140-2N NS148N NS62

Ka-50
 FED PRODUCTS FOR AIRCRAFTS
INTEGRATED DRIVE GENERATORS (IDG) MiG-29
MiG-33
Su-25
Su-27
Su-30
Su-33
Su-35
Su-37
YaK-130
YaK-42
An-72
Su-27 MiG-29 An-74
An-124
GP25 GP26 An-148
An-158
An-178
An-225
Be-200
Il-76TF
Capacity from 30 kW to 120 kW Il-96-300
Il-114
Ty-22M3
Ty-144
GP23-4 Ty-160
PGL40-2 GP21K Ty-204
Ty-214
Ty-234
Ty-334
 FED PRODUCTS FOR AIRCRAFTS AND ENGINES
SERVO VALVES, SOLENOID VALVES, SENSORS (RVDT, ZVDT)
FOR HYDRAULIC AND FUEL SYSTEMS

 Deflector jet type pilot stage is resistant to

contamination and passive failures. The deflector
An-148
jet design has an excellent first-stage pressure
An-158
recovery, over 70 percent of supply pressure, An-178
giving large second-stage stability and
contamination resistance. AI322
AI322F
 FED offers the best combination of performance to AI322FK
ENSM4T EMS7 D18
size on the market. As a result of design
optimization, as pool with size ≥10 mm and large D436-
148FM
second-stage chip force were implemented in a
MC500
compact thousing according to SAE ARP490F.

SV1 SV1-01 SV2 SV2-01

 FED PRODUCTS FOR ENGINE
FUEL CONTROL EQUIPMENT FOR ENGINES

Ka-27
Ka-29
ADT3014 Ka-30
NR9V
Ka-52
Ka-32
Ka-50
Ka-62
Mi-8
Mi-17
Mi-24
Mi-28

ND-450
NDT-500
Mi-8 NR-3MC (N)
 FED PRODUCTS FOR TURBOPROP, TURBOSHAFT ENGINES
AND APU

DART-450 AKINCI

AI-450T

ND450C (T, -1,-2) PO450M (C, -1,-2) ND450M (T, -1,-2)

 FED PRODUCTS FOR TURBOFAN ENGINES

NDТ42 RNА42 -1

AI-322

 FADEC (fuel consumption control and

compressor guide vanes control)

 The units have passed all types of laboratory,

motor and flight tests. The units are in serial
production.
L-15
 FED PRODUCTS FOR AFTERBURNING ENGINE

NT40 RS42

DTSN42
AI-322F DF42

AOD42 NT12

RNА42 ADT42 NT4

 FADEC (main and afterburning fuel consumption control, compressor guide vanes control,
all-temperature nozzle control)
 FED PRODUCTS FOR UNMANNED AIRCRAFTS
VISION AND CAPABILITIES IN THE DESIGN AND INTEGRATION
OF AIRCRAFT ACTUATION SYSTEMS FOR FLIGHT CONTROL

Electric gear rotary actuator

for engine nacelles rotation

Integrated rotary actuator

for aerodynamic surfaces

Electric gear rotary actuator

for weapon bay doors
 FED PRODUCTS FOR UNMANNED AIRCRAFTS
MOTOR AND ACTUATOR CONTROL ELECTRONICS (MCE and ACE)

FED is a designer and manufacturer of:

- control electronics for electromechanical and
electrohydraulic units for aerospace applications;
- software for them. Actuator control electronic

Power control units for

Remote electronic unit Fuel pump based on PMSM motor and
electro-mechanical actuators
axial piston pump with built-in MCE
 FED PRODUCTS FOR SPACE
ADVANCED THERMAL MANAGEMENT OF SPACE VEHICLES

The FED Thermal Division participated in

concept making of thermal control system,
justification of hydraulic lay out and design of
system components. The two-phase mechanically
pumped loop thermal control system concept had
been chosen, which was /are completely innovative
solution for the space application.

TGA

Heat dissipation power: 30 kW;

Thermal stabilization accuracy: ± 2.5 С;
Heat transfer distance: 100 m. and more.
 FED PRODUCTS FOR SPACE
ELECTRIC PROPULSION SYSTEM (EPS) FOR SATELLITES AND CUBSAT

 Implementing acceleration
principle of ionized particles
in crossed electrical and
magnetic fields (Hall-effect)

M20, M40, M70, M100, A140 and more…

Thrust – 2…350 mN;

Specific impulse – 900…3100 s;
Efficiency – 28…64 %;
Power consumption – up to 5,2 kW;
Lifetime – 1500…15000 hours
Mass – 0,3…6.7 kg
Propellants – Xe, Ar, Kr and others
 INNOVATIONS

JSC “FED” actively works to develop and implement in

practice the advanced materials and technologies for
multicomponent coatings (single- and multilayer,
nanostructural, gradient) designed for different purposes
(antifrictional, hardening, etc.)
 Metal – metallic coatings:
• metallic multilayer PVD Мо, Ti, Zr, Nb, Сг, Ni coatings
• multilayer Cu-Mo-N PVD coatings
• multilayer Cu-C PVD coatings (with different carbon
content)
 Hard and extra hard coatings:
• on nitride base in 'metal-nitrogen' systems
multilayer (Ti, Мо, Zr, Cr) N, Ti-Al-N, Ti-Mo-N, Zr-Ti-N and other
• on carbide base in 'metal-carbon' systems
single-layer and multilayer TiC, single-layer Ti-C-N,
multilayer TiC-TiN, multilayer TiC-C, single-layer MоС
 Antifriction coatings:
• based on molybdenum disulfide with the addition of copper,
titanium nitride, etc., obtained by magnetron and CVD methods
 SERVICES

WARRANTY
AND AFTER-SALES
SERVICE

REPAIR TRAINING
AT THE OF OPERATOR
ENTERPRISE PERSONNEL

REPAIR
DELIVERY ON REGIONAL
OF SPACE BASES
PARTS
TECHNICAL
PUBLICATIONS
 POSSIBILITIES OF JSC FED AS A DEVELOPER

 autonomous, combined, complex electrohydraulic actuators with a force of up to 200 kN;

 electromechanical drives progressive with a force of up to 40 kN and rotational action with
the moments on the shaft up to 220 Nm;
 adjustable and unregulated axial-plunger pumps with a flow rate from 2 to 200 l/min at pressures up to
38 MPa;
 hydraulic motors with torque on the shaft from 2 to 150 Nm;
 drive generators from 30 kW to 120 kW;
 electric drive pumping stations of DC and AC for pressure up to 28.0 MPa and feed from 2 to 120 l/min;
 components and control systems of gas turbine engines in general;
 components and systems of electrical field control of aircraft in general;
 components and hydraulic systems of aircraft in general;

Our developments and supplied products correspond to the world level in

terms of resources and reliability, innovation and efficiency, specific
parameters and usability.
INNOVATION AEROSPACE CLUSTER “MECHATRONICS”

DEVELOPMENT AND PRODUCTION OF HIGH-LIFT SYSTEMS OF

AIRCRAFT WITH HYBRID ACTUATORS
 CLUSTER COMPOSITION Government

JSC FED – PROJECT INTEGRATOR Unions

Research Centers Copyright  2020 JSC “FED”. All right reserved

ANTONOV AN-178 COMPONENTS DEVELOPED AND PRODUCED
BY MEMBERS OF AEROSPACE CLUSTER “MECHATRONICS”
ANTONOV AN-132D COMPONENTS DEVELOPED AND PRODUCED
BY MEMBERS OF AEROSPACE CLUSTER “MECHATRONICS”
 CONTACTS

132 Sumskaya street, Kharkov, 61023, Ukraine

Tel.: +380577005041, Fax: +380577156476,
e-mail: [email protected], web: fed.com.ua