MBS2 THRU MBS10

Single Phase 0.8 AMPS. Glass Passivated Bridge Rectifiers

Voltage Range
200 to 1000 Volts
Current
0.8 Amperes
MBS
.193(4.90)
Features .177(4.50)

aIdeal for printed circuit board

.033(0.84)
.022(0.56)
aReliable low cost construction utilizing .157(4.00) .276(7.0)
molded plastic technique .142(3.60) MAX

aHigh surge current capability

aHigh temperature soldering guaranteed: .102(2.60)
.087(2.20)
250
/ 10 seconds at 5 lbs., (2.3 kg )
tension .106(2.70) .053(1.53) .014(0.35)
aSmall size, simple installation .090(2.30) .0.37(0.95) .006(0.15)

aLeads solderable per MIL-STD-202

Method 208 .008(0.20) .118(3.0)
MAX MAX .083(2.12) .043(1.10)
.043(1.10) .028(0.70)

Dimensions in inches and (millimeters)

Maximum Ratings and Electrical Characteristics
Rating at 25
ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number MBS2 MBS4 MBS6 MBS8 MBS10 Units
Maximum Recurrent Peak Reverse Voltage 200 400 600 800 1000 V
Maximum RMS Voltage 140 280 420 560 700 V
Maximum DC Blocking Voltage 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
On glass-epoxy P.C.B. 0.5 A
On aluminum substrate
0.8
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load 35 A
(JEDEC method )
Maximum Instantaneous Forward Voltage 1.0 V
@ 0.4A
Maximum DC Reverse Current @ TA=25
5.0 uA
at Rated DC Blocking Voltage @ TA=125
100 uA
Typical Junction Capacitance Per Leg 13 pF
Typical Thermal Resistance Per Leg RJA 85
/W
Operating Temperature Range TJ -55 to +150

Storage Temperature Range TSTG -55 to +150

- 50 -
 RATINGS AND CHARACTERISTIC CURVES (MBS2 THRU MBS10 )

FIG.1- DERATING CURVE FOR OUTPUT RECTIFIED FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD
CURRENT SURGE CURRENT PER LEG
0.8 35
AVERAGE FORWARD RECTIFIED CURRENT. (A)

Ta=40 C
Aluminum Substrate
Single Half Sine-Wave

PEAK FORWARD SURGE CURRENT. (A)

0.7 30
(JEDEC Method)
0.6
25

0.5
Glass 20 F=50 Hz F=60 Hz
0.4 Epoxy
P.C.B
15
0.3

10
0.2

1 Cycle
0.1 Resistive or Inductive Load 5.0

0 0
0 20 40 60 80 100 120 140 160 1 10 100
O
AMBIENT TEMPERATURE. ( C) Number of Cycles)

FIG.3- TYPICAL FORWARD VOLTAGE FIG.4- TYPICAL REVERSE LEAKAGE

CHARACTERISTICS PER LEG CHARACTERISTICS PER LEG
10 100
INSTANTANEOUS REVERSE LEAKAGE CURRENT. (mA)
INSTANTANEOUS FORWARD CURRENT. (A)

Tj=150 0C 10 Tj=125 0C

1
Tj=25 0C
1

0.1
0.1

Tj=25 C
Pulse Width=300ms Tj=25 0C
1% Duty Cycle
0.01
0.01
0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 20 40 60 80 100
INSTANTANEOUS FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)

FIG.5- TYPICAL JUNCTION CAPACTITANCE

PER LEG
30

Tj=25 C
25
JUNCTION CAPACITANCE (pF)

f = 1 MHz
Vsig = 50mVp-p

20

15

10

5.0

0
0.1 1 10 100 200
REVERSE VOLTAGE. (V)

- 51 -