Document From Mayukh
Document From Mayukh
energy to for
Compressors,
fromElectric Energy
theStrategies
the
processes
Conservation
Energy
energy industries
selection cOnservation
generated reduceEnergy is
domestic
manufacturing techniques. quality or
efficient conservation
consumption
motor Maintenance
unit.operating
eneray motors:operating
ensure of thát motorsloading. Proper
berating Process for drives,control
Variable Compared In efficient Energy
motor: motors:
routine
significantly our for
the using consumption. in boilers,
themselves. the
cOuntry and
sector
is
efficiency operating controlwhich the motors, industry energy
the motor Ifvariable materials Half utilised energy
at it speed to maintenance.
parameters. limit speed These operation options is
could partial is should normal furnaces
of
much In and
is large.motors: too,
of variable saving for good a
requirements
on drives: for that the
of not at speed of such motors Remarkable Most domestic
range motor load. full energy
machinery. we
construction total available
motor. significantly less be motors of may etc. point nothing
It It high are of in
load,
should drives. capable electric
speed
increases
from
temperature, However, than Machinery following require Most energy
give the industry to
Maintenance
The conservation
industry efficient with purpose, start but
instead industries in per
5 beful energy drives, savings
sufficient industrial
saving
to Many
of motorsconsumption as a
oversized reduced less and unit
strategic
25% the preferred
it rating, sector
should of many
operating that global
motors. whichabout
inlife industrial input also correct can output.
noise, of more efficient by
options mainly
of
terms reduction are are vibration, sector
motors standards use following be is 20 use
consumption cycle motors too also to two equipped
at energy a to
vibration, number latest sizeachieved is considerable
of of for use different
processes motors for use are 30%Energy of
due
energymotor is the be less works primary or
necessary to taken in noise,
manufacturing for financial
four electric as ofenergy
of for rating to conservation
usual
load. number efficiency with same use with motors diverse the
totaltheby as and motors on speeds.
reasons things:
care need
facility and high share. total in
wellother partial motor, regard savings motors,
output energy order
of of may heat. used as
as
to in to
energyefficient
Government
changing
bulbs. efficient
energybulbs
(LED).
Diode to
Energy
isStrategies
electricity
used.uses Airefficient Lightning a
considerable30o
conditioners:
more and
conservation
of industry excess
used
light Try reflectS
same
twoPlace Always wherelightning
Use level. than be improving generation ofoperate efficiency heat
Power generates
Compressed
or CFL, by the
electricity stated for power
modifyingbulbs has to wall task five LED using
System: recovery for
use lamps
intensity it bulbs:
total energy
factor
with heat
more use share. customers space
also surfaces is
lightning, factor andconsiderable
thattimes
produces proper energy the cost.
fromnatural required. in or
than In in light Light lo w from air
typical their taken corners light it Compact domestic saving power correction canheatingwaste
device
of compared Governmentpower
the coloured saves system:
anything instead light and
light billsgenerated
in Compressed
make
lightning
initiative
factories which visible heat
family market. factor terms
at
or
ofreduce about fittings
fluorescent can sector in factors, and/or amount
user the
of
illumination
rooms, surface concentrate to
light domestic from The
else be is
of ofdevice:system
house andLight with as one. ordinary
more the end limit also in of
much the from orcut utilised is which air e
thprocess
- a further
where arrangements.down
good plant.
implemented of can heat.
more ofadopting energy bulb required in than
60% of lamps Sectorindustry at compressed
Inmore
as workspace. electricity
bulbs.
our in mainly for operating increasemany increase
In of
than manufacturers they space. by point process.
companies possible. (CFL), domestic effective. compressed many
country, technologies number use industries,
can In to customers
15 only with the
energy other andThere of start policies/tariff
power the Inair
applications,
to Light
reflect energy per system
25o air of
in efficiency purpose, overallsuch
to the words,can it Light as
conditioning are surface
lamps are factor. unit plants air
remove
to for about can cases,
of light space
produce also the two
Emittingefficient cansystem
total help
from for more which for
equal main 20 Use be
less
in
In summer, ceiling or table fancan be used against heat. Compared
to air conditioner (7-10 Rs/hour), ceiling fans costs about 1-2
Rs/hour to operate.
If we set temperature to above 220C, then we can save 3to 5%
energy for each degree above 220C. It isalways recommendable to
set the temperature of air conditioner at 250C to have the better
comfort at least energy usage.
Generally air conditioner cool and reduce the humidity levelof room
in less than half an hour, so use sleep mode or timer and keep the
air conditioner off for sometime.
Each cycle of washing uses many liters of water. For efficient use,
machine should operate on full load and should also plan periodic
wash to save on water too.
and
Do not use to0 much detergent. It causes more time to wash
may require more energy for extra rinses.
Soak or pre-wash the cloths for effective cleaning and to save time
of washing. It indirectly saves energy consumption.
Seyser/Water Heater: Heating water in ageyser can be an expensive
task if not done correctly. Awater geyser requires a lot of energy to neat
his high consumption of electricity shoots up the electricity bill during
winters. Therefore in order to lower the monthly electricity bills, it is very
Important to use water geysers in aright way.
nere are two types of geysers available in the market: One with
thermostat settings outside and changeable, other where
thermostat is not visible from outside and cannot be changed. Most
geysers available in market have a default thermostat setting of 60
degree or high. This means that water in your geyser will be heated
tllit reaches a tenmperature of 60 degrees or high. Water heated up
to this temperature becomes extremely hot and needs to be mixed
with lot of cold water before use. According to many energy saVing
groups, water that is heated up to 40 to 45 degrees C is good to
Use. S0, if you have a geyser with outside thermostat setting,
change it from 60 degrees to 40 to 45 degrees C.
Do not keep water geyser ON for longer duration. Many people have
a tendency of leaving the geyser \ON' all the time. This tendency
leads to lot of electricity wastage. Once the water is heated the
power supply automatically cuts off. After some time hot water
begins to lose the heat through the body of geyser. This way the
temperature of water comes down after sometime. Once the
temperature of the water is down by certain degrees, the
thermostat switches on the power supply and water heating prOcess
starts all over again. This on-off process repeats all through the day
and consumes electricity.
Select the right sized geyser as per your requirement. An over-sized
geyser means heating extra water that is not required
Install solar water heating system.
Use BEE labelled product. Five Star rated geysers consume less
electricity for heating water as well as have much less heat loss.